![](/media/cache/profiles/vlcsnap-2021-10-25-16h54m29s128.png.50x50_q85.jpg)
DE upgrade of Crabrace code. Note you still need to add switches and (external) LEDs.
Diff: main.cpp
- Revision:
- 0:4d82538f5640
diff -r 000000000000 -r 4d82538f5640 main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Mon Oct 22 15:50:15 2018 +0000 @@ -0,0 +1,93 @@ +/* +ES200 3321 Project 2 Team Crab Race +MIDN 3/c Pak, Tamas, etc +*/ +#include "mbed.h" +#include "stdio.h" +#include "Motor.h" +#include "Servo.h" + +// declare global hardware objects +Serial pc(USBTX,USBRX); // for printing out stuff during debugging +Motor knife_motor(p26, p30, p29); +Servo finish_servo(p22); +Servo start_servo(p21); + +// where are your switches? you need a few +DigitalIn start_sw(p19); + +// need LEDs (they're supposed to be external LEDs!) +DigitalOut led[4]= {LED1, LED2, LED3, LED4}; + + + + + +int main(void) +{ + int x; // for random outcome of race + int i; // a counter variable + + // setup + pc.printf("ES200 3321 Project 2 Team Crab Race\r\n"); + pc.printf("main() thread running\r\n"); + pc.printf("main() thread calibrating servos\r\n"); + start_servo.calibrate(0.0009, 90.0); // HiTec HS422 servos for ES200/202 + finish_servo.calibrate(0.0009, 90.0); + start_servo.write(0.0); // set start gate initial position + finish_servo.write(0.5); // set finish gate initial position + knife_motor.speed(0.0); // stop knife motor + + // main loop + while(1) { + + // STATE: IDLE + pc.printf("main() thread idle state\r\n"); + start_servo.write(0.0); + finish_servo.write(0.5); + while (!start_sw.read()) { + ThisThread::sleep_for(200); // works like wait() + } + + + // STATE: START RACE + x = (rand()%10)+1; + pc.printf("main() thread starting a race, x = %d\r\n",x); + start_servo.write(0.25); // lower start gate to begin race + ThisThread::sleep_for(1000); //gives time for crab to get down track + + + // STATE: END RACE depending on value of x + pc.printf("main() thread preparing to end race\r\n"); + start_servo.write(0.0); //set initial start gate position + if (x <= 7) { + pc.printf("main() thread for x = %d, victory display\r\n",x); + finish_servo = 1.0; //gate has a 70% chance to go one way + pc.printf("main() thread waiting for start_sw to stop display\r\n"); + while (start_sw.read()) { + for (i=0; i<5; i++) { + // blink lights for victory display + led[i] = 1; + ThisThread::sleep_for(150); + led[i]=0; + } // for + } // while(start_sw.read()) + } // if (x<=7) + else { //30% chance the gate will go the other way + pc.printf("main() thread for x = %d, fatality display\r\n",x); + finish_servo.write(0.0); + pc.printf("main() thread waiting for start_sw to stop display\r\n"); + while (start_sw.read()) { + knife_motor.speed (0.5); + ThisThread::sleep_for(500); + knife_motor.speed (-0.5); + ThisThread::sleep_for(500); + } // while(start_sw.read()) + knife_motor.speed(0); // stop knife + } + pc.printf("main() thread returning to idle state, reset the racer positions\r\n"); + finish_servo.write(0.5); //set finish gate to halfway point + + + } // while(1) +} // main() \ No newline at end of file