eunkyoung kim
/
mbed-src
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: SSD1306_smart_watch
Fork of
mbed-src
by 
eunkyoung kim
Diff: vendor/NXP/LPC4088/hal/ethernet_api.c
- Revision:
- 13:0645d8841f51
- Parent:
- 12:5fa2273de5db
- Child:
- 14:096882eb0961
diff -r 5fa2273de5db -r 0645d8841f51 vendor/NXP/LPC4088/hal/ethernet_api.c
--- a/vendor/NXP/LPC4088/hal/ethernet_api.c Wed Jul 24 11:11:21 2013 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,964 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include <string.h>
-
-#include "ethernet_api.h"
-#include "cmsis.h"
-#include "mbed_interface.h"
-#include "toolchain.h"
-#include "error.h"
-
-#define NEW_LOGIC 0
-#define NEW_ETH_BUFFER 0
-
-#if NEW_ETH_BUFFER
-
-#define NUM_RX_FRAG 4 // Number of Rx Fragments (== packets)
-#define NUM_TX_FRAG 3 // Number of Tx Fragments (== packets)
-
-#define ETH_MAX_FLEN 1536 // Maximum Ethernet Frame Size
-#define ETH_FRAG_SIZE ETH_MAX_FLEN // Packet Fragment size (same as packet length)
-
-#else
-
-// Memfree calculation:
-// (16 * 1024) - ((2 * 4 * NUM_RX) + (2 * 4 * NUM_RX) + (0x300 * NUM_RX) +
-// (2 * 4 * NUM_TX) + (1 * 4 * NUM_TX) + (0x300 * NUM_TX)) = 8556
-/* EMAC Memory Buffer configuration for 16K Ethernet RAM. */
-#define NUM_RX_FRAG 4 /* Num.of RX Fragments 4*1536= 6.0kB */
-#define NUM_TX_FRAG 3 /* Num.of TX Fragments 3*1536= 4.6kB */
-//#define ETH_FRAG_SIZE 1536 /* Packet Fragment size 1536 Bytes */
-
-//#define ETH_MAX_FLEN 1536 /* Max. Ethernet Frame Size */
-#define ETH_FRAG_SIZE 0x300 /* Packet Fragment size 1536/2 Bytes */
-#define ETH_MAX_FLEN 0x300 /* Max. Ethernet Frame Size */
-
-const int ethernet_MTU_SIZE = 0x300;
-
-#endif
-
-#define ETHERNET_ADDR_SIZE 6
-
-PACKED struct RX_DESC_TypeDef { /* RX Descriptor struct */
- unsigned int Packet;
- unsigned int Ctrl;
-};
-typedef struct RX_DESC_TypeDef RX_DESC_TypeDef;
-
-PACKED struct RX_STAT_TypeDef { /* RX Status struct */
- unsigned int Info;
- unsigned int HashCRC;
-};
-typedef struct RX_STAT_TypeDef RX_STAT_TypeDef;
-
-PACKED struct TX_DESC_TypeDef { /* TX Descriptor struct */
- unsigned int Packet;
- unsigned int Ctrl;
-};
-typedef struct TX_DESC_TypeDef TX_DESC_TypeDef;
-
-PACKED struct TX_STAT_TypeDef { /* TX Status struct */
- unsigned int Info;
-};
-typedef struct TX_STAT_TypeDef TX_STAT_TypeDef;
-
-/* MAC Configuration Register 1 */
-#define MAC1_REC_EN 0x00000001 /* Receive Enable */
-#define MAC1_PASS_ALL 0x00000002 /* Pass All Receive Frames */
-#define MAC1_RX_FLOWC 0x00000004 /* RX Flow Control */
-#define MAC1_TX_FLOWC 0x00000008 /* TX Flow Control */
-#define MAC1_LOOPB 0x00000010 /* Loop Back Mode */
-#define MAC1_RES_TX 0x00000100 /* Reset TX Logic */
-#define MAC1_RES_MCS_TX 0x00000200 /* Reset MAC TX Control Sublayer */
-#define MAC1_RES_RX 0x00000400 /* Reset RX Logic */
-#define MAC1_RES_MCS_RX 0x00000800 /* Reset MAC RX Control Sublayer */
-#define MAC1_SIM_RES 0x00004000 /* Simulation Reset */
-#define MAC1_SOFT_RES 0x00008000 /* Soft Reset MAC */
-
-/* MAC Configuration Register 2 */
-#define MAC2_FULL_DUP 0x00000001 /* Full Duplex Mode */
-#define MAC2_FRM_LEN_CHK 0x00000002 /* Frame Length Checking */
-#define MAC2_HUGE_FRM_EN 0x00000004 /* Huge Frame Enable */
-#define MAC2_DLY_CRC 0x00000008 /* Delayed CRC Mode */
-#define MAC2_CRC_EN 0x00000010 /* Append CRC to every Frame */
-#define MAC2_PAD_EN 0x00000020 /* Pad all Short Frames */
-#define MAC2_VLAN_PAD_EN 0x00000040 /* VLAN Pad Enable */
-#define MAC2_ADET_PAD_EN 0x00000080 /* Auto Detect Pad Enable */
-#define MAC2_PPREAM_ENF 0x00000100 /* Pure Preamble Enforcement */
-#define MAC2_LPREAM_ENF 0x00000200 /* Long Preamble Enforcement */
-#define MAC2_NO_BACKOFF 0x00001000 /* No Backoff Algorithm */
-#define MAC2_BACK_PRESSURE 0x00002000 /* Backoff Presurre / No Backoff */
-#define MAC2_EXCESS_DEF 0x00004000 /* Excess Defer */
-
-/* Back-to-Back Inter-Packet-Gap Register */
-#define IPGT_FULL_DUP 0x00000015 /* Recommended value for Full Duplex */
-#define IPGT_HALF_DUP 0x00000012 /* Recommended value for Half Duplex */
-
-/* Non Back-to-Back Inter-Packet-Gap Register */
-#define IPGR_DEF 0x00000012 /* Recommended value */
-
-/* Collision Window/Retry Register */
-#define CLRT_DEF 0x0000370F /* Default value */
-
-/* PHY Support Register */
-#define SUPP_SPEED 0x00000100 /* Reduced MII Logic Current Speed */
-//#define SUPP_RES_RMII 0x00000800 /* Reset Reduced MII Logic */
-#define SUPP_RES_RMII 0x00000000 /* Reset Reduced MII Logic */
-
-/* Test Register */
-#define TEST_SHCUT_PQUANTA 0x00000001 /* Shortcut Pause Quanta */
-#define TEST_TST_PAUSE 0x00000002 /* Test Pause */
-#define TEST_TST_BACKP 0x00000004 /* Test Back Pressure */
-
-/* MII Management Configuration Register */
-#define MCFG_SCAN_INC 0x00000001 /* Scan Increment PHY Address */
-#define MCFG_SUPP_PREAM 0x00000002 /* Suppress Preamble */
-#define MCFG_CLK_SEL 0x0000003C /* Clock Select Mask */
-#define MCFG_RES_MII 0x00008000 /* Reset MII Management Hardware */
-
-/* MII Management Command Register */
-#define MCMD_READ 0x00000001 /* MII Read */
-#define MCMD_SCAN 0x00000002 /* MII Scan continuously */
-
-#define MII_WR_TOUT 0x00050000 /* MII Write timeout count */
-#define MII_RD_TOUT 0x00050000 /* MII Read timeout count */
-
-/* MII Management Address Register */
-#define MADR_REG_ADR 0x0000001F /* MII Register Address Mask */
-#define MADR_PHY_ADR 0x00001F00 /* PHY Address Mask */
-
-/* MII Management Indicators Register */
-#define MIND_BUSY 0x00000001 /* MII is Busy */
-#define MIND_SCAN 0x00000002 /* MII Scanning in Progress */
-#define MIND_NOT_VAL 0x00000004 /* MII Read Data not valid */
-#define MIND_MII_LINK_FAIL 0x00000008 /* MII Link Failed */
-
-/* Command Register */
-#define CR_RX_EN 0x00000001 /* Enable Receive */
-#define CR_TX_EN 0x00000002 /* Enable Transmit */
-#define CR_REG_RES 0x00000008 /* Reset Host Registers */
-#define CR_TX_RES 0x00000010 /* Reset Transmit Datapath */
-#define CR_RX_RES 0x00000020 /* Reset Receive Datapath */
-#define CR_PASS_RUNT_FRM 0x00000040 /* Pass Runt Frames */
-#define CR_PASS_RX_FILT 0x00000080 /* Pass RX Filter */
-#define CR_TX_FLOW_CTRL 0x00000100 /* TX Flow Control */
-#define CR_RMII 0x00000200 /* Reduced MII Interface */
-#define CR_FULL_DUP 0x00000400 /* Full Duplex */
-
-/* Status Register */
-#define SR_RX_EN 0x00000001 /* Enable Receive */
-#define SR_TX_EN 0x00000002 /* Enable Transmit */
-
-/* Transmit Status Vector 0 Register */
-#define TSV0_CRC_ERR 0x00000001 /* CRC error */
-#define TSV0_LEN_CHKERR 0x00000002 /* Length Check Error */
-#define TSV0_LEN_OUTRNG 0x00000004 /* Length Out of Range */
-#define TSV0_DONE 0x00000008 /* Tramsmission Completed */
-#define TSV0_MCAST 0x00000010 /* Multicast Destination */
-#define TSV0_BCAST 0x00000020 /* Broadcast Destination */
-#define TSV0_PKT_DEFER 0x00000040 /* Packet Deferred */
-#define TSV0_EXC_DEFER 0x00000080 /* Excessive Packet Deferral */
-#define TSV0_EXC_COLL 0x00000100 /* Excessive Collision */
-#define TSV0_LATE_COLL 0x00000200 /* Late Collision Occured */
-#define TSV0_GIANT 0x00000400 /* Giant Frame */
-#define TSV0_UNDERRUN 0x00000800 /* Buffer Underrun */
-#define TSV0_BYTES 0x0FFFF000 /* Total Bytes Transferred */
-#define TSV0_CTRL_FRAME 0x10000000 /* Control Frame */
-#define TSV0_PAUSE 0x20000000 /* Pause Frame */
-#define TSV0_BACK_PRESS 0x40000000 /* Backpressure Method Applied */
-#define TSV0_VLAN 0x80000000 /* VLAN Frame */
-
-/* Transmit Status Vector 1 Register */
-#define TSV1_BYTE_CNT 0x0000FFFF /* Transmit Byte Count */
-#define TSV1_COLL_CNT 0x000F0000 /* Transmit Collision Count */
-
-/* Receive Status Vector Register */
-#define RSV_BYTE_CNT 0x0000FFFF /* Receive Byte Count */
-#define RSV_PKT_IGNORED 0x00010000 /* Packet Previously Ignored */
-#define RSV_RXDV_SEEN 0x00020000 /* RXDV Event Previously Seen */
-#define RSV_CARR_SEEN 0x00040000 /* Carrier Event Previously Seen */
-#define RSV_REC_CODEV 0x00080000 /* Receive Code Violation */
-#define RSV_CRC_ERR 0x00100000 /* CRC Error */
-#define RSV_LEN_CHKERR 0x00200000 /* Length Check Error */
-#define RSV_LEN_OUTRNG 0x00400000 /* Length Out of Range */
-#define RSV_REC_OK 0x00800000 /* Frame Received OK */
-#define RSV_MCAST 0x01000000 /* Multicast Frame */
-#define RSV_BCAST 0x02000000 /* Broadcast Frame */
-#define RSV_DRIB_NIBB 0x04000000 /* Dribble Nibble */
-#define RSV_CTRL_FRAME 0x08000000 /* Control Frame */
-#define RSV_PAUSE 0x10000000 /* Pause Frame */
-#define RSV_UNSUPP_OPC 0x20000000 /* Unsupported Opcode */
-#define RSV_VLAN 0x40000000 /* VLAN Frame */
-
-/* Flow Control Counter Register */
-#define FCC_MIRR_CNT 0x0000FFFF /* Mirror Counter */
-#define FCC_PAUSE_TIM 0xFFFF0000 /* Pause Timer */
-
-/* Flow Control Status Register */
-#define FCS_MIRR_CNT 0x0000FFFF /* Mirror Counter Current */
-
-/* Receive Filter Control Register */
-#define RFC_UCAST_EN 0x00000001 /* Accept Unicast Frames Enable */
-#define RFC_BCAST_EN 0x00000002 /* Accept Broadcast Frames Enable */
-#define RFC_MCAST_EN 0x00000004 /* Accept Multicast Frames Enable */
-#define RFC_UCAST_HASH_EN 0x00000008 /* Accept Unicast Hash Filter Frames */
-#define RFC_MCAST_HASH_EN 0x00000010 /* Accept Multicast Hash Filter Fram.*/
-#define RFC_PERFECT_EN 0x00000020 /* Accept Perfect Match Enable */
-#define RFC_MAGP_WOL_EN 0x00001000 /* Magic Packet Filter WoL Enable */
-#define RFC_PFILT_WOL_EN 0x00002000 /* Perfect Filter WoL Enable */
-
-/* Receive Filter WoL Status/Clear Registers */
-#define WOL_UCAST 0x00000001 /* Unicast Frame caused WoL */
-#define WOL_BCAST 0x00000002 /* Broadcast Frame caused WoL */
-#define WOL_MCAST 0x00000004 /* Multicast Frame caused WoL */
-#define WOL_UCAST_HASH 0x00000008 /* Unicast Hash Filter Frame WoL */
-#define WOL_MCAST_HASH 0x00000010 /* Multicast Hash Filter Frame WoL */
-#define WOL_PERFECT 0x00000020 /* Perfect Filter WoL */
-#define WOL_RX_FILTER 0x00000080 /* RX Filter caused WoL */
-#define WOL_MAG_PACKET 0x00000100 /* Magic Packet Filter caused WoL */
-
-/* Interrupt Status/Enable/Clear/Set Registers */
-#define INT_RX_OVERRUN 0x00000001 /* Overrun Error in RX Queue */
-#define INT_RX_ERR 0x00000002 /* Receive Error */
-#define INT_RX_FIN 0x00000004 /* RX Finished Process Descriptors */
-#define INT_RX_DONE 0x00000008 /* Receive Done */
-#define INT_TX_UNDERRUN 0x00000010 /* Transmit Underrun */
-#define INT_TX_ERR 0x00000020 /* Transmit Error */
-#define INT_TX_FIN 0x00000040 /* TX Finished Process Descriptors */
-#define INT_TX_DONE 0x00000080 /* Transmit Done */
-#define INT_SOFT_INT 0x00001000 /* Software Triggered Interrupt */
-#define INT_WAKEUP 0x00002000 /* Wakeup Event Interrupt */
-
-/* Power Down Register */
-#define PD_POWER_DOWN 0x80000000 /* Power Down MAC */
-
-/* RX Descriptor Control Word */
-#define RCTRL_SIZE 0x000007FF /* Buffer size mask */
-#define RCTRL_INT 0x80000000 /* Generate RxDone Interrupt */
-
-/* RX Status Hash CRC Word */
-#define RHASH_SA 0x000001FF /* Hash CRC for Source Address */
-#define RHASH_DA 0x001FF000 /* Hash CRC for Destination Address */
-
-/* RX Status Information Word */
-#define RINFO_SIZE 0x000007FF /* Data size in bytes */
-#define RINFO_CTRL_FRAME 0x00040000 /* Control Frame */
-#define RINFO_VLAN 0x00080000 /* VLAN Frame */
-#define RINFO_FAIL_FILT 0x00100000 /* RX Filter Failed */
-#define RINFO_MCAST 0x00200000 /* Multicast Frame */
-#define RINFO_BCAST 0x00400000 /* Broadcast Frame */
-#define RINFO_CRC_ERR 0x00800000 /* CRC Error in Frame */
-#define RINFO_SYM_ERR 0x01000000 /* Symbol Error from PHY */
-#define RINFO_LEN_ERR 0x02000000 /* Length Error */
-#define RINFO_RANGE_ERR 0x04000000 /* Range Error (exceeded max. size) */
-#define RINFO_ALIGN_ERR 0x08000000 /* Alignment Error */
-#define RINFO_OVERRUN 0x10000000 /* Receive overrun */
-#define RINFO_NO_DESCR 0x20000000 /* No new Descriptor available */
-#define RINFO_LAST_FLAG 0x40000000 /* Last Fragment in Frame */
-#define RINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
-
-//#define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_CRC_ERR | RINFO_SYM_ERR | RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN)
-#define RINFO_ERR_MASK (RINFO_FAIL_FILT | RINFO_SYM_ERR | \
- RINFO_LEN_ERR | RINFO_ALIGN_ERR | RINFO_OVERRUN)
-
-
-/* TX Descriptor Control Word */
-#define TCTRL_SIZE 0x000007FF /* Size of data buffer in bytes */
-#define TCTRL_OVERRIDE 0x04000000 /* Override Default MAC Registers */
-#define TCTRL_HUGE 0x08000000 /* Enable Huge Frame */
-#define TCTRL_PAD 0x10000000 /* Pad short Frames to 64 bytes */
-#define TCTRL_CRC 0x20000000 /* Append a hardware CRC to Frame */
-#define TCTRL_LAST 0x40000000 /* Last Descriptor for TX Frame */
-#define TCTRL_INT 0x80000000 /* Generate TxDone Interrupt */
-
-/* TX Status Information Word */
-#define TINFO_COL_CNT 0x01E00000 /* Collision Count */
-#define TINFO_DEFER 0x02000000 /* Packet Deferred (not an error) */
-#define TINFO_EXCESS_DEF 0x04000000 /* Excessive Deferral */
-#define TINFO_EXCESS_COL 0x08000000 /* Excessive Collision */
-#define TINFO_LATE_COL 0x10000000 /* Late Collision Occured */
-#define TINFO_UNDERRUN 0x20000000 /* Transmit Underrun */
-#define TINFO_NO_DESCR 0x40000000 /* No new Descriptor available */
-#define TINFO_ERR 0x80000000 /* Error Occured (OR of all errors) */
-
-/* ENET Device Revision ID */
-#define OLD_EMAC_MODULE_ID 0x39022000 /* Rev. ID for first rev '-' */
-
-/* DP83848C PHY Registers */
-#define PHY_REG_BMCR 0x00 /* Basic Mode Control Register */
-#define PHY_REG_BMSR 0x01 /* Basic Mode Status Register */
-#define PHY_REG_IDR1 0x02 /* PHY Identifier 1 */
-#define PHY_REG_IDR2 0x03 /* PHY Identifier 2 */
-#define PHY_REG_ANAR 0x04 /* Auto-Negotiation Advertisement */
-#define PHY_REG_ANLPAR 0x05 /* Auto-Neg. Link Partner Abitily */
-#define PHY_REG_ANER 0x06 /* Auto-Neg. Expansion Register */
-#define PHY_REG_ANNPTR 0x07 /* Auto-Neg. Next Page TX */
-
-/* PHY Extended Registers */
-#define PHY_REG_STS 0x10 /* Status Register */
-#define PHY_REG_MICR 0x11 /* MII Interrupt Control Register */
-#define PHY_REG_MISR 0x12 /* MII Interrupt Status Register */
-#define PHY_REG_FCSCR 0x14 /* False Carrier Sense Counter */
-#define PHY_REG_RECR 0x15 /* Receive Error Counter */
-#define PHY_REG_PCSR 0x16 /* PCS Sublayer Config. and Status */
-#define PHY_REG_RBR 0x17 /* RMII and Bypass Register */
-#define PHY_REG_LEDCR 0x18 /* LED Direct Control Register */
-#define PHY_REG_PHYCR 0x19 /* PHY Control Register */
-#define PHY_REG_10BTSCR 0x1A /* 10Base-T Status/Control Register */
-#define PHY_REG_CDCTRL1 0x1B /* CD Test Control and BIST Extens. */
-#define PHY_REG_EDCR 0x1D /* Energy Detect Control Register */
-
-#define PHY_REG_SCSR 0x1F /* PHY Special Control/Status Register */
-
-#define PHY_FULLD_100M 0x2100 /* Full Duplex 100Mbit */
-#define PHY_HALFD_100M 0x2000 /* Half Duplex 100Mbit */
-#define PHY_FULLD_10M 0x0100 /* Full Duplex 10Mbit */
-#define PHY_HALFD_10M 0x0000 /* Half Duplex 10MBit */
-#define PHY_AUTO_NEG 0x3000 /* Select Auto Negotiation */
-
-#define DP83848C_DEF_ADR 0x0100 /* Default PHY device address */
-#define DP83848C_ID 0x20005C90 /* PHY Identifier - DP83848C */
-
-#define LAN8720_ID 0x0007C0F0 /* PHY Identifier - LAN8720 */
-
-#define PHY_STS_LINK 0x0001 /* PHY Status Link Mask */
-#define PHY_STS_SPEED 0x0002 /* PHY Status Speed Mask */
-#define PHY_STS_DUPLEX 0x0004 /* PHY Status Duplex Mask */
-
-#define PHY_BMCR_RESET 0x8000 /* PHY Reset */
-
-#define PHY_BMSR_LINK 0x0004 /* PHY BMSR Link valid */
-
-#define PHY_SCSR_100MBIT 0x0008 /* Speed: 1=100 MBit, 0=10Mbit */
-#define PHY_SCSR_DUPLEX 0x0010 /* PHY Duplex Mask */
-
-
-static int phy_read(unsigned int PhyReg);
-static int phy_write(unsigned int PhyReg, unsigned short Data);
-
-static void txdscr_init(void);
-static void rxdscr_init(void);
-
-#if defined (__ICCARM__)
-# define AHBSRAM1
-#elif defined(TOOLCHAIN_GCC_CR)
-# define AHBSRAM1 __attribute__((section(".data.$RamPeriph32")))
-#else
-# define AHBSRAM1 __attribute__((section("AHBSRAM1"),aligned))
-#endif
-
-AHBSRAM1 volatile uint8_t rxbuf[NUM_RX_FRAG][ETH_FRAG_SIZE];
-AHBSRAM1 volatile uint8_t txbuf[NUM_TX_FRAG][ETH_FRAG_SIZE];
-AHBSRAM1 volatile RX_DESC_TypeDef rxdesc[NUM_RX_FRAG];
-AHBSRAM1 volatile RX_STAT_TypeDef rxstat[NUM_RX_FRAG];
-AHBSRAM1 volatile TX_DESC_TypeDef txdesc[NUM_TX_FRAG];
-AHBSRAM1 volatile TX_STAT_TypeDef txstat[NUM_TX_FRAG];
-
-
-#if NEW_LOGIC
-static int rx_consume_offset = -1;
-static int tx_produce_offset = -1;
-#else
-static int send_doff = 0;
-static int send_idx = -1;
-static int send_size = 0;
-
-static int receive_soff = 0;
-static int receive_idx = -1;
-#endif
-
-static uint32_t phy_id = 0;
-
-static inline int rinc(int idx, int mod) {
- ++idx;
- idx %= mod;
- return idx;
-}
-
-//extern unsigned int SystemFrequency;
-static inline unsigned int clockselect() {
- if(SystemCoreClock < 10000000) {
- return 1;
- } else if(SystemCoreClock < 15000000) {
- return 2;
- } else if(SystemCoreClock < 20000000) {
- return 3;
- } else if(SystemCoreClock < 25000000) {
- return 4;
- } else if(SystemCoreClock < 35000000) {
- return 5;
- } else if(SystemCoreClock < 50000000) {
- return 6;
- } else if(SystemCoreClock < 70000000) {
- return 7;
- } else if(SystemCoreClock < 80000000) {
- return 8;
- } else if(SystemCoreClock < 90000000) {
- return 9;
- } else if(SystemCoreClock < 100000000) {
- return 10;
- } else if(SystemCoreClock < 120000000) {
- return 11;
- } else if(SystemCoreClock < 130000000) {
- return 12;
- } else if(SystemCoreClock < 140000000) {
- return 13;
- } else if(SystemCoreClock < 150000000) {
- return 15;
- } else if(SystemCoreClock < 160000000) {
- return 16;
- } else {
- return 0;
- }
-}
-
-#ifndef min
-#define min(x, y) (((x)<(y))?(x):(y))
-#endif
-
-/*----------------------------------------------------------------------------
- Ethernet Device initialize
- *----------------------------------------------------------------------------*/
-int ethernet_init() {
- int regv, tout;
- char mac[ETHERNET_ADDR_SIZE];
- unsigned int clock = clockselect();
-
- LPC_SC->PCONP |= 0x40000000; /* Power Up the EMAC controller. */
-
- LPC_IOCON->P1_0 &= ~0x07; /* ENET I/O config */
- LPC_IOCON->P1_0 |= 0x01; /* ENET_TXD0 */
- LPC_IOCON->P1_1 &= ~0x07;
- LPC_IOCON->P1_1 |= 0x01; /* ENET_TXD1 */
- LPC_IOCON->P1_4 &= ~0x07;
- LPC_IOCON->P1_4 |= 0x01; /* ENET_TXEN */
- LPC_IOCON->P1_8 &= ~0x07;
- LPC_IOCON->P1_8 |= 0x01; /* ENET_CRS */
- LPC_IOCON->P1_9 &= ~0x07;
- LPC_IOCON->P1_9 |= 0x01; /* ENET_RXD0 */
- LPC_IOCON->P1_10 &= ~0x07;
- LPC_IOCON->P1_10 |= 0x01; /* ENET_RXD1 */
- LPC_IOCON->P1_14 &= ~0x07;
- LPC_IOCON->P1_14 |= 0x01; /* ENET_RX_ER */
- LPC_IOCON->P1_15 &= ~0x07;
- LPC_IOCON->P1_15 |= 0x01; /* ENET_REF_CLK */
- LPC_IOCON->P1_16 &= ~0x07; /* ENET/PHY I/O config */
- LPC_IOCON->P1_16 |= 0x01; /* ENET_MDC */
- LPC_IOCON->P1_17 &= ~0x07;
- LPC_IOCON->P1_17 |= 0x01; /* ENET_MDIO */
-
- /* Reset all EMAC internal modules. */
- LPC_EMAC->MAC1 = MAC1_RES_TX | MAC1_RES_MCS_TX | MAC1_RES_RX |
- MAC1_RES_MCS_RX | MAC1_SIM_RES | MAC1_SOFT_RES;
- LPC_EMAC->Command = CR_REG_RES | CR_TX_RES | CR_RX_RES | CR_PASS_RUNT_FRM;
-
- for(tout = 100; tout; tout--) __NOP(); /* A short delay after reset. */
-
- LPC_EMAC->MAC1 = MAC1_PASS_ALL; /* Initialize MAC control registers. */
- LPC_EMAC->MAC2 = MAC2_CRC_EN | MAC2_PAD_EN;
- LPC_EMAC->MAXF = ETH_MAX_FLEN;
- LPC_EMAC->CLRT = CLRT_DEF;
- LPC_EMAC->IPGR = IPGR_DEF;
-
- LPC_EMAC->Command = CR_RMII | CR_PASS_RUNT_FRM; /* Enable Reduced MII interface. */
-
- LPC_EMAC->MCFG = (clock << 0x2) & MCFG_CLK_SEL; /* Set clock */
- LPC_EMAC->MCFG |= MCFG_RES_MII; /* and reset */
-
- for(tout = 100; tout; tout--) __NOP(); /* A short delay */
-
- LPC_EMAC->MCFG = (clock << 0x2) & MCFG_CLK_SEL;
- LPC_EMAC->MCMD = 0;
-
- LPC_EMAC->SUPP = SUPP_RES_RMII; /* Reset Reduced MII Logic. */
-
- for (tout = 100; tout; tout--) __NOP(); /* A short delay */
-
- LPC_EMAC->SUPP = 0;
-
- phy_write(PHY_REG_BMCR, PHY_BMCR_RESET); /* perform PHY reset */
- for(tout = 0x20000; ; tout--) { /* Wait for hardware reset to end. */
- regv = phy_read(PHY_REG_BMCR);
- if(regv < 0 || tout == 0) {
- return -1; /* Error */
- }
- if(!(regv & PHY_BMCR_RESET)) {
- break; /* Reset complete. */
- }
- }
-
- phy_id = (phy_read(PHY_REG_IDR1) << 16);
- phy_id |= (phy_read(PHY_REG_IDR2) & 0XFFF0);
-
- if (phy_id != DP83848C_ID && phy_id != LAN8720_ID) {
- error("Unknown Ethernet PHY (%x)", (unsigned int)phy_id);
- }
-
- ethernet_set_link(-1, 0);
-
- /* Set the Ethernet MAC Address registers */
- ethernet_address(mac);
- LPC_EMAC->SA0 = ((uint32_t)mac[5] << 8) | (uint32_t)mac[4];
- LPC_EMAC->SA1 = ((uint32_t)mac[3] << 8) | (uint32_t)mac[2];
- LPC_EMAC->SA2 = ((uint32_t)mac[1] << 8) | (uint32_t)mac[0];
-
- txdscr_init(); /* initialize DMA TX Descriptor */
- rxdscr_init(); /* initialize DMA RX Descriptor */
-
- LPC_EMAC->RxFilterCtrl = RFC_UCAST_EN | RFC_MCAST_EN | RFC_BCAST_EN | RFC_PERFECT_EN;
- /* Receive Broadcast, Perfect Match Packets */
-
- LPC_EMAC->IntEnable = INT_RX_DONE | INT_TX_DONE; /* Enable EMAC interrupts. */
- LPC_EMAC->IntClear = 0xFFFF; /* Reset all interrupts */
-
- LPC_EMAC->Command |= (CR_RX_EN | CR_TX_EN); /* Enable receive and transmit mode of MAC Ethernet core */
- LPC_EMAC->MAC1 |= MAC1_REC_EN;
-
-#if NEW_LOGIC
- rx_consume_offset = -1;
- tx_produce_offset = -1;
-#else
- send_doff = 0;
- send_idx = -1;
- send_size = 0;
-
- receive_soff = 0;
- receive_idx = -1;
-#endif
-
- return 0;
-}
-
-/*----------------------------------------------------------------------------
- Ethernet Device Uninitialize
- *----------------------------------------------------------------------------*/
-void ethernet_free() {
- LPC_EMAC->IntEnable &= ~(INT_RX_DONE | INT_TX_DONE);
- LPC_EMAC->IntClear = 0xFFFF;
-
- LPC_SC->PCONP &= ~0x40000000; /* Power down the EMAC controller. */
-
- LPC_IOCON->P1_0 &= ~0x07; /* ENET I/O config */
- LPC_IOCON->P1_1 &= ~0x07;
- LPC_IOCON->P1_4 &= ~0x07;
- LPC_IOCON->P1_8 &= ~0x07;
- LPC_IOCON->P1_9 &= ~0x07;
- LPC_IOCON->P1_10 &= ~0x07;
- LPC_IOCON->P1_14 &= ~0x07;
- LPC_IOCON->P1_15 &= ~0x07;
- LPC_IOCON->P1_16 &= ~0x07; /* ENET/PHY I/O config */
- LPC_IOCON->P1_17 &= ~0x07;
-}
-
-// if(TxProduceIndex == TxConsumeIndex) buffer array is empty
-// if(TxProduceIndex == TxConsumeIndex - 1) buffer is full, should not fill
-// TxProduceIndex - The buffer that will/is being fileld by driver, s/w increment
-// TxConsumeIndex - The buffer that will/is beign sent by hardware
-
-int ethernet_write(const char *data, int slen) {
-
-#if NEW_LOGIC
-
- if(tx_produce_offset < 0) { // mark as active if not already
- tx_produce_offset = 0;
- }
-
- int index = LPC_EMAC->TxProduceIndex;
-
- int remaining = ETH_MAX_FLEN - tx_produce_offset - 4; // bytes written plus checksum
- int requested = slen;
- int ncopy = min(remaining, requested);
-
- void *pdst = (void *)(txdesc[index].Packet + tx_produce_offset);
- void *psrc = (void *)(data);
-
- if(ncopy > 0 ){
- if(data != NULL) {
- memcpy(pdst, psrc, ncopy);
- } else {
- memset(pdst, 0, ncopy);
- }
- }
-
- tx_produce_offset += ncopy;
-
- return ncopy;
-
-#else
- void *pdst, *psrc;
- const int dlen = ETH_FRAG_SIZE;
- int copy = 0;
- int soff = 0;
-
- if(send_idx == -1) {
- send_idx = LPC_EMAC->TxProduceIndex;
- }
-
- if(slen + send_doff > ethernet_MTU_SIZE) {
- return -1;
- }
-
- do {
- copy = min(slen - soff, dlen - send_doff);
- pdst = (void *)(txdesc[send_idx].Packet + send_doff);
- psrc = (void *)(data + soff);
- if(send_doff + copy > ETH_FRAG_SIZE) {
- txdesc[send_idx].Ctrl = (send_doff-1) | (TCTRL_INT);
- send_idx = rinc(send_idx, NUM_TX_FRAG);
- send_doff = 0;
- }
-
- if(data != NULL) {
- memcpy(pdst, psrc, copy);
- } else {
- memset(pdst, 0, copy);
- }
-
- soff += copy;
- send_doff += copy;
- send_size += copy;
- } while(soff != slen);
-
- return soff;
-#endif
-}
-
-int ethernet_send() {
-
-#if NEW_LOGIC
- if(tx_produce_offset < 0) { // no buffer active
- return -1;
- }
-
- // ensure there is a link
- if(!ethernet_link()) {
- return -2;
- }
-
- // we have been writing in to a buffer, so finalise it
- int size = tx_produce_offset;
- int index = LPC_EMAC->TxProduceIndex;
- txdesc[index].Ctrl = (tx_produce_offset-1) | (TCTRL_INT | TCTRL_LAST);
-
- // Increment ProduceIndex to allow it to be sent
- // We can only do this if the next slot is free
- int next = rinc(index, NUM_TX_FRAG);
- while(next == LPC_EMAC->TxConsumeIndex) {
- for(int i=0; i<1000; i++) { __NOP(); }
- }
-
- LPC_EMAC->TxProduceIndex = next;
- tx_produce_offset = -1;
- return size;
-
-#else
- int s = send_size;
- txdesc[send_idx].Ctrl = (send_doff-1) | (TCTRL_INT | TCTRL_LAST);
- send_idx = rinc(send_idx, NUM_TX_FRAG);
- LPC_EMAC->TxProduceIndex = send_idx;
- send_doff = 0;
- send_idx = -1;
- send_size = 0;
- return s;
-#endif
-}
-
-// RxConsmeIndex - The index of buffer the driver will/is reading from. Driver should inc once read
-// RxProduceIndex - The index of buffer that will/is being filled by MAC. H/w will inc once rxd
-//
-// if(RxConsumeIndex == RxProduceIndex) buffer array is empty
-// if(RxConsumeIndex == RxProduceIndex + 1) buffer array is full
-
-// Recevies an arrived ethernet packet.
-// Receiving an ethernet packet will drop the last received ethernet packet
-// and make a new ethernet packet ready to read.
-// Returns size of packet, else 0 if nothing to receive
-
-// We read from RxConsumeIndex from position rx_consume_offset
-// if rx_consume_offset < 0, then we have not recieved the RxConsumeIndex packet for reading
-// rx_consume_offset = -1 // no frame
-// rx_consume_offset = 0 // start of frame
-// Assumption: A fragment should alway be a whole frame
-
-int ethernet_receive() {
-#if NEW_LOGIC
-
- // if we are currently reading a valid RxConsume buffer, increment to the next one
- if(rx_consume_offset >= 0) {
- LPC_EMAC->RxConsumeIndex = rinc(LPC_EMAC->RxConsumeIndex, NUM_RX_FRAG);
- }
-
- // if the buffer is empty, mark it as no valid buffer
- if(LPC_EMAC->RxConsumeIndex == LPC_EMAC->RxProduceIndex) {
- rx_consume_offset = -1;
- return 0;
- }
-
- uint32_t info = rxstat[LPC_EMAC->RxConsumeIndex].Info;
- rx_consume_offset = 0;
-
- // check if it is not marked as last or for errors
- if(!(info & RINFO_LAST_FLAG) || (info & RINFO_ERR_MASK)) {
- return -1;
- }
-
- int size = (info & RINFO_SIZE) + 1;
- return size - 4; // don't include checksum bytes
-
-#else
- if(receive_idx == -1) {
- receive_idx = LPC_EMAC->RxConsumeIndex;
- } else {
- while(!(rxstat[receive_idx].Info & RINFO_LAST_FLAG) && (receive_idx != LPC_EMAC->RxProduceIndex)) {
- receive_idx = rinc(receive_idx, NUM_RX_FRAG);
- }
- unsigned int info = rxstat[receive_idx].Info;
- int slen = (info & RINFO_SIZE) + 1;
-
- if(slen > ethernet_MTU_SIZE || (info & RINFO_ERR_MASK)) {
- /* Invalid frame, ignore it and free buffer. */
- receive_idx = rinc(receive_idx, NUM_RX_FRAG);
- }
- receive_idx = rinc(receive_idx, NUM_RX_FRAG);
- receive_soff = 0;
-
- LPC_EMAC->RxConsumeIndex = receive_idx;
- }
-
- if(receive_idx == LPC_EMAC->RxProduceIndex) {
- receive_idx = -1;
- return 0;
- }
-
- return (rxstat[receive_idx].Info & RINFO_SIZE) - 3;
-#endif
-}
-
-// Read from an recevied ethernet packet.
-// After receive returnd a number bigger than 0 it is
-// possible to read bytes from this packet.
-// Read will write up to size bytes into data.
-// It is possible to use read multible times.
-// Each time read will start reading after the last read byte before.
-
-int ethernet_read(char *data, int dlen) {
-#if NEW_LOGIC
- // Check we have a valid buffer to read
- if(rx_consume_offset < 0) {
- return 0;
- }
-
- // Assume 1 fragment block
- uint32_t info = rxstat[LPC_EMAC->RxConsumeIndex].Info;
- int size = (info & RINFO_SIZE) + 1 - 4; // exclude checksum
-
- int remaining = size - rx_consume_offset;
- int requested = dlen;
- int ncopy = min(remaining, requested);
-
- void *psrc = (void *)(rxdesc[LPC_EMAC->RxConsumeIndex].Packet + rx_consume_offset);
- void *pdst = (void *)(data);
-
- if(data != NULL && ncopy > 0) {
- memcpy(pdst, psrc, ncopy);
- }
-
- rx_consume_offset += ncopy;
-
- return ncopy;
-#else
- int slen;
- int copy = 0;
- unsigned int more;
- unsigned int info;
- void *pdst, *psrc;
- int doff = 0;
-
- if(receive_idx == LPC_EMAC->RxProduceIndex || receive_idx == -1) {
- return 0;
- }
-
- do {
- info = rxstat[receive_idx].Info;
- more = !(info & RINFO_LAST_FLAG);
- slen = (info & RINFO_SIZE) + 1;
-
- if(slen > ethernet_MTU_SIZE || (info & RINFO_ERR_MASK)) {
- /* Invalid frame, ignore it and free buffer. */
- receive_idx = rinc(receive_idx, NUM_RX_FRAG);
- } else {
-
- copy = min(slen - receive_soff, dlen - doff);
- psrc = (void *)(rxdesc[receive_idx].Packet + receive_soff);
- pdst = (void *)(data + doff);
-
- if(data != NULL) {
- /* check if Buffer available */
- memcpy(pdst, psrc, copy);
- }
-
- receive_soff += copy;
- doff += copy;
-
- if((more && (receive_soff == slen))) {
- receive_idx = rinc(receive_idx, NUM_RX_FRAG);
- receive_soff = 0;
- }
- }
- } while(more && !(doff == dlen) && !receive_soff);
-
- return doff;
-#endif
-}
-
-int ethernet_link(void) {
-
- if (phy_id == DP83848C_ID) {
- return (phy_read(PHY_REG_STS) & PHY_STS_LINK);
- }
- else { // LAN8720_ID
- return (phy_read(PHY_REG_BMSR) & PHY_BMSR_LINK);
- }
-}
-
-static int phy_write(unsigned int PhyReg, unsigned short Data) {
- unsigned int timeOut;
-
- LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
- LPC_EMAC->MWTD = Data;
-
- for(timeOut = 0; timeOut < MII_WR_TOUT; timeOut++) { /* Wait until operation completed */
- if((LPC_EMAC->MIND & MIND_BUSY) == 0) {
- return 0;
- }
- }
-
- return -1;
-}
-
-
-static int phy_read(unsigned int PhyReg) {
- unsigned int timeOut;
-
- LPC_EMAC->MADR = DP83848C_DEF_ADR | PhyReg;
- LPC_EMAC->MCMD = MCMD_READ;
-
- for(timeOut = 0; timeOut < MII_RD_TOUT; timeOut++) { /* Wait until operation completed */
- if((LPC_EMAC->MIND & MIND_BUSY) == 0) {
- LPC_EMAC->MCMD = 0;
- return LPC_EMAC->MRDD; /* Return a 16-bit value. */
- }
- }
-
- return -1;
-}
-
-
-static void txdscr_init() {
- int i;
-
- for(i = 0; i < NUM_TX_FRAG; i++) {
- txdesc[i].Packet = (uint32_t)&txbuf[i];
- txdesc[i].Ctrl = 0;
- txstat[i].Info = 0;
- }
-
- LPC_EMAC->TxDescriptor = (uint32_t)txdesc; /* Set EMAC Transmit Descriptor Registers. */
- LPC_EMAC->TxStatus = (uint32_t)txstat;
- LPC_EMAC->TxDescriptorNumber = NUM_TX_FRAG-1;
-
- LPC_EMAC->TxProduceIndex = 0; /* Tx Descriptors Point to 0 */
-}
-
-
-static void rxdscr_init() {
- int i;
-
- for(i = 0; i < NUM_RX_FRAG; i++) {
- rxdesc[i].Packet = (uint32_t)&rxbuf[i];
- rxdesc[i].Ctrl = RCTRL_INT | (ETH_FRAG_SIZE-1);
- rxstat[i].Info = 0;
- rxstat[i].HashCRC = 0;
- }
-
- LPC_EMAC->RxDescriptor = (uint32_t)rxdesc; /* Set EMAC Receive Descriptor Registers. */
- LPC_EMAC->RxStatus = (uint32_t)rxstat;
- LPC_EMAC->RxDescriptorNumber = NUM_RX_FRAG-1;
-
- LPC_EMAC->RxConsumeIndex = 0; /* Rx Descriptors Point to 0 */
-}
-
-void ethernet_address(char *mac) {
- mbed_mac_address(mac);
-}
-
-void ethernet_set_link(int speed, int duplex) {
- unsigned short phy_data;
- int tout;
-
- if((speed < 0) || (speed > 1)) {
- phy_data = PHY_AUTO_NEG;
- } else {
- phy_data = (((unsigned short) speed << 13) |
- ((unsigned short) duplex << 8));
- }
-
- phy_write(PHY_REG_BMCR, phy_data);
-
- for (tout = 100; tout; tout--) { __NOP(); } /* A short delay */
-
- switch(phy_id) {
- case DP83848C_ID:
- phy_data = phy_read(PHY_REG_STS);
-
- if(phy_data & PHY_STS_DUPLEX) {
- LPC_EMAC->MAC2 |= MAC2_FULL_DUP;
- LPC_EMAC->Command |= CR_FULL_DUP;
- LPC_EMAC->IPGT = IPGT_FULL_DUP;
- } else {
- LPC_EMAC->MAC2 &= ~MAC2_FULL_DUP;
- LPC_EMAC->Command &= ~CR_FULL_DUP;
- LPC_EMAC->IPGT = IPGT_HALF_DUP;
- }
-
- if(phy_data & PHY_STS_SPEED) {
- LPC_EMAC->SUPP &= ~SUPP_SPEED;
- } else {
- LPC_EMAC->SUPP |= SUPP_SPEED;
- }
- break;
-
- case LAN8720_ID:
- phy_data = phy_read(PHY_REG_SCSR);
-
- if (phy_data & PHY_SCSR_DUPLEX) {
- LPC_EMAC->MAC2 |= MAC2_FULL_DUP;
- LPC_EMAC->Command |= CR_FULL_DUP;
- LPC_EMAC->IPGT = IPGT_FULL_DUP;
- } else {
- LPC_EMAC->Command &= ~CR_FULL_DUP;
- LPC_EMAC->IPGT = IPGT_HALF_DUP;
- }
-
- if(phy_data & PHY_SCSR_100MBIT) {
- LPC_EMAC->SUPP |= SUPP_SPEED;
- } else {
- LPC_EMAC->SUPP &= ~SUPP_SPEED;
- }
-
- break;
- }
-}