Emir Sokic
mbed.h verzija za koristenje na predmetu PAI
Revision 0:05aad811ea07, committed 2015-03-10
- Comitter:
- esokic
- Date:
- Tue Mar 10 09:51:52 2015 +0000
- Commit message:
- mbed.h verzija od marta 2014, za koristenje na predmetu PAI
Changed in this revision
diff -r 000000000000 -r 05aad811ea07 AnalogIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/AnalogIn.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ * while(1) {
+ * if(temperature > 0.5) {
+ * printf("Too hot! (%f)", temperature.read());
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+ /** Create an AnalogIn, connected to the specified pin
+ *
+ * @param pin AnalogIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ AnalogIn(PinName pin) {
+ analogin_init(&_adc, pin);
+ }
+
+ /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @returns A floating-point value representing the current input voltage, measured as a percentage
+ */
+ float read() {
+ return analogin_read(&_adc);
+ }
+
+ /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @returns
+ * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+ */
+ unsigned short read_u16() {
+ return analogin_read_u16(&_adc);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ *
+ * The float() operator can be used as a shorthand for read() to simplify common code sequences
+ *
+ * Example:
+ * @code
+ * float x = volume.read();
+ * float x = volume;
+ *
+ * if(volume.read() > 0.25) { ... }
+ * if(volume > 0.25) { ... }
+ * @endcode
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ analogin_t _adc;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 AnalogOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/AnalogOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ * while(1) {
+ * tri = tri + 0.01;
+ * wait_us(1);
+ * if(tri == 1) {
+ * tri = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+ /** Create an AnalogOut connected to the specified pin
+ *
+ * @param AnalogOut pin to connect to (18)
+ */
+ AnalogOut(PinName pin) {
+ analogout_init(&_dac, pin);
+ }
+
+ /** Set the output voltage, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output voltage,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ analogout_write(&_dac, value);
+ }
+
+ /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @param value 16-bit unsigned short representing the output voltage,
+ * normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+ */
+ void write_u16(unsigned short value) {
+ analogout_write_u16(&_dac, value);
+ }
+
+ /** Return the current output voltage setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current voltage being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous write().
+ */
+ float read() {
+ return analogout_read(&_dac);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for write()
+ */
+ AnalogOut& operator= (float percent) {
+ write(percent);
+ return *this;
+ }
+
+ AnalogOut& operator= (AnalogOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ dac_t _dac;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 BusIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusIn.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ */
+class BusIn {
+
+public:
+ /* Group: Configuration Methods */
+
+ /** Create an BusIn, connected to the specified pins
+ *
+ * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusIn(PinName pins[16]);
+
+ virtual ~BusIn();
+
+ /** Read the value of the input bus
+ *
+ * @returns
+ * An integer with each bit corresponding to the value read from the associated DigitalIn pin
+ */
+ int read();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalIn* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 BusInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusInOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ */
+class BusInOut {
+
+public:
+
+ /** Create an BusInOut, connected to the specified pins
+ *
+ * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusInOut(PinName pins[16]);
+
+ virtual ~BusInOut();
+
+ /* Group: Access Methods */
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+ */
+ void write(int value);
+
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalInOut pin setting
+ */
+ int read();
+
+ /** Set as an output
+ */
+ void output();
+
+ /** Set as an input
+ */
+ void input();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusInOut& operator= (int v);
+ BusInOut& operator= (BusInOut& rhs);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalInOut* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 BusOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+ /** Create an BusOut, connected to the specified pins
+ *
+ * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusOut(PinName pins[16]);
+
+ virtual ~BusOut();
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalOut pin setting
+ */
+ int read();
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusOut& operator= (int v);
+ BusOut& operator= (BusOut& rhs);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalOut* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 CAN.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CAN.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** CANMessage class
+ */
+class CANMessage : public CAN_Message {
+
+public:
+ /** Creates empty CAN message.
+ */
+ CANMessage() {
+ len = 8;
+ type = CANData;
+ format = CANStandard;
+ id = 0;
+ memset(data, 0, 8);
+ }
+
+ /** Creates CAN message with specific content.
+ */
+ CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+ len = _len & 0xF;
+ type = _type;
+ format = _format;
+ id = _id;
+ memcpy(data, _data, _len);
+ }
+
+ /** Creates CAN remote message.
+ */
+ CANMessage(int _id, CANFormat _format = CANStandard) {
+ len = 0;
+ type = CANRemote;
+ format = _format;
+ id = _id;
+ memset(data, 0, 8);
+ }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+ /** Creates an CAN interface connected to specific pins.
+ *
+ * @param rd read from transmitter
+ * @param td transmit to transmitter
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * Ticker ticker;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ * CAN can1(p9, p10);
+ * CAN can2(p30, p29);
+ *
+ * char counter = 0;
+ *
+ * void send() {
+ * if(can1.write(CANMessage(1337, &counter, 1))) {
+ * printf("Message sent: %d\n", counter);
+ * counter++;
+ * }
+ * led1 = !led1;
+ * }
+ *
+ * int main() {
+ * ticker.attach(&send, 1);
+ * CANMessage msg;
+ * while(1) {
+ * if(can2.read(msg)) {
+ * printf("Message received: %d\n\n", msg.data[0]);
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+ CAN(PinName rd, PinName td);
+ virtual ~CAN();
+
+ /** Set the frequency of the CAN interface
+ *
+ * @param hz The bus frequency in hertz
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise
+ */
+ int frequency(int hz);
+
+ /** Write a CANMessage to the bus.
+ *
+ * @param msg The CANMessage to write.
+ *
+ * @returns
+ * 0 if write failed,
+ * 1 if write was successful
+ */
+ int write(CANMessage msg);
+
+ /** Read a CANMessage from the bus.
+ *
+ * @param msg A CANMessage to read to.
+ * @param handle message filter handle (0 for any message)
+ *
+ * @returns
+ * 0 if no message arrived,
+ * 1 if message arrived
+ */
+ int read(CANMessage &msg, int handle = 0);
+
+ /** Reset CAN interface.
+ *
+ * To use after error overflow.
+ */
+ void reset();
+
+ /** Puts or removes the CAN interface into silent monitoring mode
+ *
+ * @param silent boolean indicating whether to go into silent mode or not
+ */
+ void monitor(bool silent);
+
+ enum Mode {
+ Reset = 0,
+ Normal,
+ Silent,
+ LocalTest,
+ GlobalTest,
+ SilentTest
+ };
+
+ /** Change CAN operation to the specified mode
+ *
+ * @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+ *
+ * @returns
+ * 0 if mode change failed or unsupported,
+ * 1 if mode change was successful
+ */
+ int mode(Mode mode);
+
+ /** Filter out incomming messages
+ *
+ * @param id the id to filter on
+ * @param mask the mask applied to the id
+ * @param format format to filter on (Default CANAny)
+ * @param handle message filter handle (Optional)
+ *
+ * @returns
+ * 0 if filter change failed or unsupported,
+ * new filter handle if successful
+ */
+ int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+ /** Returns number of read errors to detect read overflow errors.
+ */
+ unsigned char rderror();
+
+ /** Returns number of write errors to detect write overflow errors.
+ */
+ unsigned char tderror();
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+ EwIrq,
+ DoIrq,
+ WuIrq,
+ EpIrq,
+ AlIrq,
+ BeIrq,
+ IdIrq
+ };
+
+ /** Attach a function to call whenever a CAN frame received interrupt is
+ * generated.
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ can_irq_set(&_can, (CanIrqType)type, 1);
+ }
+ else {
+ can_irq_set(&_can, (CanIrqType)type, 0);
+ }
+ }
+
+ static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+ can_t _can;
+ FunctionPointer _irq[9];
+};
+
+} // namespace mbed
+
+#endif
+
+#endif // MBED_CAN_H
diff -r 000000000000 -r 05aad811ea07 CallChain.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CallChain.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "FunctionPointer.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ * printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ * printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ * void f(void) {
+ * printf("A::f (class member).\n");
+ * }
+ * };
+ *
+ * int main() {
+ * Test test;
+ *
+ * chain.add(second);
+ * chain.add_front(first);
+ * chain.add(&test, &Test::f);
+ * chain.call();
+ * }
+ * @endcode
+ */
+
+typedef FunctionPointer* pFunctionPointer_t;
+
+class CallChain {
+public:
+ /** Create an empty chain
+ *
+ * @param size (optional) Initial size of the chain
+ */
+ CallChain(int size = 4);
+ virtual ~CallChain();
+
+ /** Add a function at the end of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add(void (*function)(void));
+
+ /** Add a function at the end of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add(T *tptr, void (T::*mptr)(void)) {
+ return common_add(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_front(void (*function)(void));
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_front(T *tptr, void (T::*mptr)(void)) {
+ return common_add_front(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Get the number of functions in the chain
+ */
+ int size() const;
+
+ /** Get a function object from the chain
+ *
+ * @param i function object index
+ *
+ * @returns
+ * The function object at position 'i' in the chain
+ */
+ pFunctionPointer_t get(int i) const;
+
+ /** Look for a function object in the call chain
+ *
+ * @param f the function object to search
+ *
+ * @returns
+ * The index of the function object if found, -1 otherwise.
+ */
+ int find(pFunctionPointer_t f) const;
+
+ /** Clear the call chain (remove all functions in the chain).
+ */
+ void clear();
+
+ /** Remove a function object from the chain
+ *
+ * @arg f the function object to remove
+ *
+ * @returns
+ * true if the function object was found and removed, false otherwise.
+ */
+ bool remove(pFunctionPointer_t f);
+
+ /** Call all the functions in the chain in sequence
+ */
+ void call();
+
+#ifdef MBED_OPERATORS
+ void operator ()(void) {
+ call();
+ }
+ pFunctionPointer_t operator [](int i) const {
+ return get(i);
+ }
+#endif
+
+private:
+ void _check_size();
+ pFunctionPointer_t common_add(pFunctionPointer_t pf);
+ pFunctionPointer_t common_add_front(pFunctionPointer_t pf);
+
+ pFunctionPointer_t* _chain;
+ int _size;
+ int _elements;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r 05aad811ea07 DigitalIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalIn.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,97 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * if(enable) {
+ * led = !led;
+ * }
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ */
+ DigitalIn(PinName pin) {
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ * @param mode the initial mode of the pin
+ */
+ DigitalIn(PinName pin, PinMode mode) {
+ gpio_init_in_ex(&gpio, pin, mode);
+ }
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 DigitalInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalInOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ */
+class DigitalInOut {
+
+public:
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ */
+ DigitalInOut(PinName pin) {
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ * @param direction the initial direction of the pin
+ * @param mode the initial mode of the pin
+ * @param value the initial value of the pin if is an output
+ */
+ DigitalInOut(PinName pin, PinDirection direction, PinMode mode, int value) {
+ gpio_init_inout(&gpio, pin, direction, mode, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin if it is an output,
+ * or read the input if set as an input
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ gpio_dir(&gpio, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ gpio_dir(&gpio, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalInOut& operator= (DigitalInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 DigitalOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,106 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ */
+ DigitalOut(PinName pin) {
+ gpio_init_out(&gpio, pin);
+ }
+
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ * @param value the initial pin value
+ */
+ DigitalOut(PinName pin, int value){
+ gpio_init_out_ex(&gpio, pin, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalOut& operator= (DigitalOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 DirHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DirHandle.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define NAME_MAX 255
+typedef int mode_t;
+
+#else
+# include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+ char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ * by a FileSystemLike's opendir method. Implementations must define
+ * at least closedir, readdir and rewinddir.
+ *
+ * If a FileSystemLike class defines the opendir method, then the
+ * directories of an object of that type can be accessed by
+ * DIR *d = opendir("/example/directory") (or opendir("/example")
+ * to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ * The root directory is considered to contain all FileLike and
+ * FileSystemLike objects, so the DIR* returned by opendir("/") will
+ * reflect this.
+ */
+class DirHandle {
+
+public:
+ /** Closes the directory.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on error.
+ */
+ virtual int closedir()=0;
+
+ /** Return the directory entry at the current position, and
+ * advances the position to the next entry.
+ *
+ * @returns
+ * A pointer to a dirent structure representing the
+ * directory entry at the current position, or NULL on reaching
+ * end of directory or error.
+ */
+ virtual struct dirent *readdir()=0;
+
+ /** Resets the position to the beginning of the directory.
+ */
+ virtual void rewinddir()=0;
+
+ /** Returns the current position of the DirHandle.
+ *
+ * @returns
+ * the current position,
+ * -1 on error.
+ */
+ virtual off_t telldir() { return -1; }
+
+ /** Sets the position of the DirHandle.
+ *
+ * @param location The location to seek to. Must be a value returned by telldir.
+ */
+ virtual void seekdir(off_t location) { }
+
+ virtual ~DirHandle() {}
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+ DIR *opendir(const char*);
+ struct dirent *readdir(DIR *);
+ int closedir(DIR*);
+ void rewinddir(DIR*);
+ long telldir(DIR*);
+ void seekdir(DIR*, long);
+ int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */
diff -r 000000000000 -r 05aad811ea07 Ethernet.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Ethernet.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,170 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * char buf[0x600];
+ *
+ * while(1) {
+ * int size = eth.receive();
+ * if(size > 0) {
+ * eth.read(buf, size);
+ * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * }
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+ /** Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /** Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate,
+ HalfDuplex10,
+ FullDuplex10,
+ HalfDuplex100,
+ FullDuplex100
+ };
+
+ /** Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * @param data An array to write.
+ * @param size The size of data.
+ *
+ * @returns
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /** Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * @returns
+ * 0 if the sending was failed,
+ * or the size of the packet successfully sent.
+ */
+ int send();
+
+ /** Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * @returns
+ * 0 if no ethernet packet is arrived,
+ * or the size of the arrived packet.
+ */
+ int receive();
+
+ /** Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * @returns
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /** Gives the ethernet address of the mbed.
+ *
+ * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * @returns
+ * 0 if no ethernet link is pressent,
+ * 1 if an ethernet link is pressent.
+ *
+ * Example:
+ * @code
+ * // Using the Ethernet link function
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * wait(1); // Needed after startup.
+ * if (eth.link()) {
+ * printf("online\n");
+ * } else {
+ * printf("offline\n");
+ * }
+ * }
+ * @endcode
+ */
+ int link();
+
+ /** Sets the speed and duplex parameters of an ethernet link
+ *
+ * - AutoNegotiate Auto negotiate speed and duplex
+ * - HalfDuplex10 10 Mbit, half duplex
+ * - FullDuplex10 10 Mbit, full duplex
+ * - HalfDuplex100 100 Mbit, half duplex
+ * - FullDuplex100 100 Mbit, full duplex
+ *
+ * @param mode the speed and duplex mode to set the link to:
+ */
+ void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FileBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileBase.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR 2
+# define O_CREAT 0x0200
+# define O_TRUNC 0x0400
+# define O_APPEND 0x0008
+
+# define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/fcntl.h>
+# include <sys/types.h>
+# include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+
+namespace mbed {
+
+typedef enum {
+ FilePathType,
+ FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+ FileBase(const char *name, PathType t);
+
+ virtual ~FileBase();
+
+ const char* getName(void);
+ PathType getPathType(void);
+
+ static FileBase *lookup(const char *name, unsigned int len);
+
+ static FileBase *get(int n);
+
+protected:
+ static FileBase *_head;
+
+ FileBase *_next;
+ const char *_name;
+ PathType _path_type;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FileHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileHandle.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ * and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ * sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ * created by FileSystem, and wrapped up by stdio.
+ */
+class FileHandle {
+
+public:
+ /** Write the contents of a buffer to the file
+ *
+ * @param buffer the buffer to write from
+ * @param length the number of characters to write
+ *
+ * @returns
+ * The number of characters written (possibly 0) on success, -1 on error.
+ */
+ virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+ /** Close the file
+ *
+ * @returns
+ * Zero on success, -1 on error.
+ */
+ virtual int close() = 0;
+
+ /** Function read
+ * Reads the contents of the file into a buffer
+ *
+ * @param buffer the buffer to read in to
+ * @param length the number of characters to read
+ *
+ * @returns
+ * The number of characters read (zero at end of file) on success, -1 on error.
+ */
+ virtual ssize_t read(void* buffer, size_t length) = 0;
+
+ /** Check if the handle is for a interactive terminal device.
+ * If so, line buffered behaviour is used by default
+ *
+ * @returns
+ * 1 if it is a terminal,
+ * 0 otherwise
+ */
+ virtual int isatty() = 0;
+
+ /** Move the file position to a given offset from a given location.
+ *
+ * @param offset The offset from whence to move to
+ * @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+ * current file position, or SEEK_END for the end of the file.
+ *
+ * @returns
+ * new file position on success,
+ * -1 on failure or unsupported
+ */
+ virtual off_t lseek(off_t offset, int whence) = 0;
+
+ /** Flush any buffers associated with the FileHandle, ensuring it
+ * is up to date on disk
+ *
+ * @returns
+ * 0 on success or un-needed,
+ * -1 on error
+ */
+ virtual int fsync() = 0;
+
+ virtual off_t flen() {
+ /* remember our current position */
+ off_t pos = lseek(0, SEEK_CUR);
+ if(pos == -1) return -1;
+ /* seek to the end to get the file length */
+ off_t res = lseek(0, SEEK_END);
+ /* return to our old position */
+ lseek(pos, SEEK_SET);
+ return res;
+ }
+
+ virtual ~FileHandle();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FileLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileLike.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ * A file-like object is one that can be opened with fopen by
+ * fopen("/name", mode). It is intersection of the classes Base and
+ * FileHandle.
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+ /* Constructor FileLike
+ *
+ * Variables
+ * name - The name to use to open the file.
+ */
+ FileLike(const char *name);
+
+ virtual ~FileLike();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FilePath.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FilePath.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+ FilePath(const char* file_path);
+
+ const char* fileName(void);
+
+ bool isFileSystem(void);
+ FileSystemLike* fileSystem(void);
+
+ bool isFile(void);
+ FileLike* file(void);
+ bool exists(void);
+
+private:
+ const char* file_name;
+ FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FileSystemLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileSystemLike.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ * though it by fopen("/name/filename", mode)
+ *
+ * Implementations must define at least open (the default definitions
+ * of the rest of the functions just return error values).
+ */
+class FileSystemLike : public FileBase {
+
+public:
+ /** FileSystemLike constructor
+ *
+ * @param name The name to use for the filesystem.
+ */
+ FileSystemLike(const char *name);
+
+ virtual ~FileSystemLike();
+
+ static DirHandle *opendir();
+ friend class BaseDirHandle;
+
+ /** Opens a file from the filesystem
+ *
+ * @param filename The name of the file to open.
+ * @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+ * zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+ *
+ * @returns
+ * A pointer to a FileHandle object representing the
+ * file on success, or NULL on failure.
+ */
+ virtual FileHandle *open(const char *filename, int flags) = 0;
+
+ /** Remove a file from the filesystem.
+ *
+ * @param filename the name of the file to remove.
+ * @param returns 0 on success, -1 on failure.
+ */
+ virtual int remove(const char *filename) { return -1; };
+
+ /** Rename a file in the filesystem.
+ *
+ * @param oldname the name of the file to rename.
+ * @param newname the name to rename it to.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int rename(const char *oldname, const char *newname) { return -1; };
+
+ /** Opens a directory in the filesystem and returns a DirHandle
+ * representing the directory stream.
+ *
+ * @param name The name of the directory to open.
+ *
+ * @returns
+ * A DirHandle representing the directory stream, or
+ * NULL on failure.
+ */
+ virtual DirHandle *opendir(const char *name) { return NULL; };
+
+ /** Creates a directory in the filesystem.
+ *
+ * @param name The name of the directory to create.
+ * @param mode The permissions to create the directory with.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int mkdir(const char *name, mode_t mode) { return -1; }
+
+ // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 FunctionPointer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FunctionPointer.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include <string.h>
+
+namespace mbed {
+
+typedef void (*pvoidf_t)(void);
+
+/** A class for storing and calling a pointer to a static or member void function
+ */
+class FunctionPointer {
+public:
+
+ /** Create a FunctionPointer, attaching a static function
+ *
+ * @param function The void static function to attach (default is none)
+ */
+ FunctionPointer(void (*function)(void) = 0);
+
+ /** Create a FunctionPointer, attaching a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ FunctionPointer(T *object, void (T::*member)(void)) {
+ attach(object, member);
+ }
+
+ /** Attach a static function
+ *
+ * @param function The void static function to attach (default is none)
+ */
+ void attach(void (*function)(void) = 0);
+
+ /** Attach a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ void attach(T *object, void (T::*member)(void)) {
+ _object = static_cast<void*>(object);
+ memcpy(_member, (char*)&member, sizeof(member));
+ _membercaller = &FunctionPointer::membercaller<T>;
+ _function = 0;
+ }
+
+ /** Call the attached static or member function
+ */
+ void call();
+
+ pvoidf_t get_function() const {
+ return (pvoidf_t)_function;
+ }
+
+#ifdef MBED_OPERATORS
+ void operator ()(void);
+#endif
+
+private:
+ template<typename T>
+ static void membercaller(void *object, char *member) {
+ T* o = static_cast<T*>(object);
+ void (T::*m)(void);
+ memcpy((char*)&m, member, sizeof(m));
+ (o->*m)();
+ }
+
+ void (*_function)(void); // static function pointer - 0 if none attached
+ void *_object; // object this pointer - 0 if none attached
+ char _member[16]; // raw member function pointer storage - converted back by registered _membercaller
+ void (*_membercaller)(void*, char*); // registered membercaller function to convert back and call _member on _object
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 I2C.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/I2C.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,144 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ * int address = 0x62;
+ * char data[2];
+ * i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+ enum RxStatus {
+ NoData,
+ MasterGeneralCall,
+ MasterWrite,
+ MasterRead
+ };
+
+ enum Acknowledge {
+ NoACK = 0,
+ ACK = 1
+ };
+
+ /** Create an I2C Master interface, connected to the specified pins
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2C(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Read from an I2C slave
+ *
+ * Performs a complete read transaction. The bottom bit of
+ * the address is forced to 1 to indicate a read.
+ *
+ * @param address 8-bit I2C slave address [ addr | 1 ]
+ * @param data Pointer to the byte-array to read data in to
+ * @param length Number of bytes to read
+ * @param repeated Repeated start, true - don't send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int read(int address, char *data, int length, bool repeated = false);
+
+ /** Read a single byte from the I2C bus
+ *
+ * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+ *
+ * @returns
+ * the byte read
+ */
+ int read(int ack);
+
+ /** Write to an I2C slave
+ *
+ * Performs a complete write transaction. The bottom bit of
+ * the address is forced to 0 to indicate a write.
+ *
+ * @param address 8-bit I2C slave address [ addr | 0 ]
+ * @param data Pointer to the byte-array data to send
+ * @param length Number of bytes to send
+ * @param repeated Repeated start, true - do not send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int write(int address, const char *data, int length, bool repeated = false);
+
+ /** Write single byte out on the I2C bus
+ *
+ * @param data data to write out on bus
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Creates a start condition on the I2C bus
+ */
+
+ void start(void);
+
+ /** Creates a stop condition on the I2C bus
+ */
+ void stop(void);
+
+protected:
+ void aquire();
+
+ i2c_t _i2c;
+ static I2C *_owner;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 I2CSlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/I2CSlave.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,154 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ * char buf[10];
+ * char msg[] = "Slave!";
+ *
+ * slave.address(0xA0);
+ * while (1) {
+ * int i = slave.receive();
+ * switch (i) {
+ * case I2CSlave::ReadAddressed:
+ * slave.write(msg, strlen(msg) + 1); // Includes null char
+ * break;
+ * case I2CSlave::WriteGeneral:
+ * slave.read(buf, 10);
+ * printf("Read G: %s\n", buf);
+ * break;
+ * case I2CSlave::WriteAddressed:
+ * slave.read(buf, 10);
+ * printf("Read A: %s\n", buf);
+ * break;
+ * }
+ * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
+ * }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+ enum RxStatus {
+ NoData = 0,
+ ReadAddressed = 1,
+ WriteGeneral = 2,
+ WriteAddressed = 3
+ };
+
+ /** Create an I2C Slave interface, connected to the specified pins.
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2CSlave(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Checks to see if this I2C Slave has been addressed.
+ *
+ * @returns
+ * A status indicating if the device has been addressed, and how
+ * - NoData - the slave has not been addressed
+ * - ReadAddressed - the master has requested a read from this slave
+ * - WriteAddressed - the master is writing to this slave
+ * - WriteGeneral - the master is writing to all slave
+ */
+ int receive(void);
+
+ /** Read from an I2C master.
+ *
+ * @param data pointer to the byte array to read data in to
+ * @param length maximum number of bytes to read
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int read(char *data, int length);
+
+ /** Read a single byte from an I2C master.
+ *
+ * @returns
+ * the byte read
+ */
+ int read(void);
+
+ /** Write to an I2C master.
+ *
+ * @param data pointer to the byte array to be transmitted
+ * @param length the number of bytes to transmite
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int write(const char *data, int length);
+
+ /** Write a single byte to an I2C master.
+ *
+ * @data the byte to write
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Sets the I2C slave address.
+ *
+ * @param address The address to set for the slave (ignoring the least
+ * signifcant bit). If set to 0, the slave will only respond to the
+ * general call address.
+ */
+ void address(int address);
+
+ /** Reset the I2C slave back into the known ready receiving state.
+ */
+ void stop(void);
+
+protected:
+ i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 InterruptIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/InterruptIn.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ * printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ * event.rise(&trigger);
+ * while(1) {
+ * led = !led;
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+ /** Create an InterruptIn connected to the specified pin
+ *
+ * @param pin InterruptIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ InterruptIn(PinName pin);
+ virtual ~InterruptIn();
+
+ int read();
+#ifdef MBED_OPERATORS
+ operator int();
+
+#endif
+
+ /** Attach a function to call when a rising edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void rise(void (*fptr)(void));
+
+ /** Attach a member function to call when a rising edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void rise(T* tptr, void (T::*mptr)(void)) {
+ _rise.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+ }
+
+ /** Attach a function to call when a falling edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void fall(void (*fptr)(void));
+
+ /** Attach a member function to call when a falling edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void fall(T* tptr, void (T::*mptr)(void)) {
+ _fall.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Enable IRQ. This method depends on hw implementation, might enable one
+ * port interrupts. For further information, check gpio_irq_enable().
+ */
+ void enable_irq();
+
+ /** Disable IRQ. This method depends on hw implementation, might disable one
+ * port interrupts. For further information, check gpio_irq_disable().
+ */
+ void disable_irq();
+
+ static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+ gpio_t gpio;
+ gpio_irq_t gpio_irq;
+
+ FunctionPointer _rise;
+ FunctionPointer _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 InterruptManager.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/InterruptManager.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,143 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ * led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ * led2 = !led1;
+ * }
+ *
+ * int main() {
+ * led1 = led2 = 0;
+ * flipper.attach(&flip, 1.0);
+ * InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+ /** Return the only instance of this class
+ */
+ static InterruptManager* get();
+
+ /** Destroy the current instance of the interrupt manager
+ */
+ static void destroy();
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq, true);
+ }
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq, true);
+ }
+
+ /** Remove a handler from an interrupt
+ *
+ * @param handler the function object for the handler to remove
+ * @param irq the interrupt number
+ *
+ * @returns
+ * true if the handler was found and removed, false otherwise
+ */
+ bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+ InterruptManager();
+ ~InterruptManager();
+
+ // We declare the copy contructor and the assignment operator, but we don't
+ // implement them. This way, if someone tries to copy/assign our instance,
+ // he will get an error at compile time.
+ InterruptManager(const InterruptManager&);
+ InterruptManager& operator =(const InterruptManager&);
+
+ template<typename T>
+ pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ return pf;
+ }
+
+ pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+ bool must_replace_vector(IRQn_Type irq);
+ int get_irq_index(IRQn_Type irq);
+ void irq_helper();
+ void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+ static void static_irq_helper();
+
+ CallChain* _chains[NVIC_NUM_VECTORS];
+ static InterruptManager* _instance;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r 05aad811ea07 LocalFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LocalFileSystem.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+ LocalFileHandle(FILEHANDLE fh);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+ FILEHANDLE _fh;
+ int pos;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ * This allows programs to read and write files on the same disk drive that is used to program the
+ * mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ * read and write files.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local"); // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing
+ * fprintf(fp, "Hello World!");
+ * fclose(fp);
+ * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system
+ *
+ * DIR *d = opendir("/local"); // Opens the root directory of the local file system
+ * struct dirent *p;
+ * while((p = readdir(d)) != NULL) { // Print the names of the files in the local file system
+ * printf("%s\n", p->d_name); // to stdout.
+ * }
+ * closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ * If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ * on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ * The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ * not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+
+public:
+ LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+ }
+
+ virtual FileHandle *open(const char* name, int flags);
+ virtual int remove(const char *filename);
+ virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 PortIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortIn.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ * Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn p(Port2, 0x0000003F); // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ * while(1) {
+ * int pins = p.read();
+ * if(pins) {
+ * ind = 1;
+ * } else {
+ * ind = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+ /** Create an PortIn, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortIn(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 PortInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortInOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ */
+class PortInOut {
+public:
+
+ /** Create an PortInOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding port pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ port_dir(&_port, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ port_dir(&_port, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for write()
+ */
+ PortInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortInOut& operator= (PortInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 PortOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ * while(1) {
+ * ledport = LED_MASK;
+ * wait(1);
+ * ledport = 0;
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+ /** Create an PortOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_OUTPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding PortOut pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated PortOut pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** A shorthand for write()
+ */
+ PortOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortOut& operator= (PortOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 PwmOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PwmOut.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,158 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = led + 0.01;
+ * wait(0.2);
+ * if(led == 1.0) {
+ * led = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @note
+ * On the LPC1768 and LPC2368, the PWMs all share the same
+ * period - if you change the period for one, you change it for all.
+ * Although routines that change the period maintain the duty cycle
+ * for its PWM, all other PWMs will require their duty cycle to be
+ * refreshed.
+ */
+class PwmOut {
+
+public:
+
+ /** Create a PwmOut connected to the specified pin
+ *
+ * @param pin PwmOut pin to connect to
+ */
+ PwmOut(PinName pin) {
+ pwmout_init(&_pwm, pin);
+ }
+
+ /** Set the ouput duty-cycle, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output duty-cycle,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ pwmout_write(&_pwm, value);
+ }
+
+ /** Return the current output duty-cycle setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current duty-cycle being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous <write>.
+ */
+ float read() {
+ return pwmout_read(&_pwm);
+ }
+
+ /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+ *
+ * @note
+ * The resolution is currently in microseconds; periods smaller than this
+ * will be set to zero.
+ */
+ void period(float seconds) {
+ pwmout_period(&_pwm, seconds);
+ }
+
+ /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+ */
+ void period_ms(int ms) {
+ pwmout_period_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+ */
+ void period_us(int us) {
+ pwmout_period_us(&_pwm, us);
+ }
+
+ /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+ */
+ void pulsewidth(float seconds) {
+ pwmout_pulsewidth(&_pwm, seconds);
+ }
+
+ /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_ms(int ms) {
+ pwmout_pulsewidth_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_us(int us) {
+ pwmout_pulsewidth_us(&_pwm, us);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A operator shorthand for write()
+ */
+ PwmOut& operator= (float value) {
+ write(value);
+ return *this;
+ }
+
+ PwmOut& operator= (PwmOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 RawSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/RawSerial.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+ /** Create a RawSerial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ RawSerial(PinName tx, PinName rx);
+
+ /** Write a char to the serial port
+ *
+ * @param c The char to write
+ *
+ * @returns The written char or -1 if an error occured
+ */
+ int putc(int c);
+
+ /** Read a char from the serial port
+ *
+ * @returns The char read from the serial port
+ */
+ int getc();
+
+ /** Write a string to the serial port
+ *
+ * @param str The string to write
+ *
+ * @returns 0 if the write succeeds, EOF for error
+ */
+ int puts(const char *str);
+
+ int printf(const char *format, ...);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 SPI.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SPI.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_H
+#define MBED_SPI_H
+
+#include "platform.h"
+
+#if DEVICE_SPI
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI Master, used for communicating with SPI slave devices
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Most SPI devices will also require Chip Select and Reset signals. These
+ * can be controlled using <DigitalOut> pins
+ *
+ * Example:
+ * @code
+ * // Send a byte to a SPI slave, and record the response
+ *
+ * #include "mbed.h"
+ *
+ * SPI device(p5, p6, p7); // mosi, miso, sclk
+ *
+ * int main() {
+ * int response = device.write(0xFF);
+ * }
+ * @endcode
+ */
+class SPI {
+
+public:
+
+ /** Create a SPI master connected to the specified pins
+ *
+ * Pin Options:
+ * (5, 6, 7) or (11, 12, 13)
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ */
+ SPI(PinName mosi, PinName miso, PinName sclk, PinName _unused=NC);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Write to the SPI Slave and return the response
+ *
+ * @param value Data to be sent to the SPI slave
+ *
+ * @returns
+ * Response from the SPI slave
+ */
+ virtual int write(int value);
+
+protected:
+ spi_t _spi;
+
+ void aquire(void);
+ static SPI *_owner;
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 SPISlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SPISlave.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,126 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ * device.reply(0x00); // Prime SPI with first reply
+ * while(1) {
+ * if(device.receive()) {
+ * int v = device.read(); // Read byte from master
+ * v = (v + 1) % 0x100; // Add one to it, modulo 256
+ * device.reply(v); // Make this the next reply
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+ /** Create a SPI slave connected to the specified pins
+ *
+ * Pin Options:
+ * (5, 6, 7i, 8) or (11, 12, 13, 14)
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ * @param name (optional) A string to identify the object
+ */
+ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Polls the SPI to see if data has been received
+ *
+ * @returns
+ * 0 if no data,
+ * 1 otherwise
+ */
+ int receive(void);
+
+ /** Retrieve data from receive buffer as slave
+ *
+ * @returns
+ * the data in the receive buffer
+ */
+ int read(void);
+
+ /** Fill the transmission buffer with the value to be written out
+ * as slave on the next received message from the master.
+ *
+ * @param value the data to be transmitted next
+ */
+ void reply(int value);
+
+protected:
+ spi_t _spi;
+
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 Serial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Serial.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,69 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_H
+#define MBED_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Print "Hello World" to the PC
+ *
+ * #include "mbed.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.printf("Hello World\n");
+ * }
+ * @endcode
+ */
+class Serial : public SerialBase, public Stream {
+
+public:
+ /** Create a Serial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ Serial(PinName tx, PinName rx, const char *name=NULL);
+
+protected:
+ virtual int _getc();
+ virtual int _putc(int c);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 SerialBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SerialBase.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,137 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "FunctionPointer.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ */
+class SerialBase {
+
+public:
+ /** Set the baud rate of the serial port
+ *
+ * @param baudrate The baudrate of the serial port (default = 9600).
+ */
+ void baud(int baudrate);
+
+ enum Parity {
+ None = 0,
+ Odd,
+ Even,
+ Forced1,
+ Forced0
+ };
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq
+ };
+
+ enum Flow {
+ Disabled = 0,
+ RTS,
+ CTS,
+ RTSCTS
+ };
+
+ /** Set the transmission format used by the serial port
+ *
+ * @param bits The number of bits in a word (5-8; default = 8)
+ * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+ * @param stop The number of stop bits (1 or 2; default = 1)
+ */
+ void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable();
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable();
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ serial_irq_set(&_serial, (SerialIrq)type, 1);
+ }
+ }
+
+ /** Generate a break condition on the serial line
+ */
+ void send_break();
+
+#if DEVICE_SERIAL_FC
+ /** Set the flow control type on the serial port
+ *
+ * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+ * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+ * @param flow2 the second flow control pin (CTS for RTSCTS)
+ */
+ void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+ static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+protected:
+ SerialBase(PinName tx, PinName rx);
+
+ int _base_getc();
+ int _base_putc(int c);
+
+ serial_t _serial;
+ FunctionPointer _irq[2];
+ int _baud;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 Stream.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Stream.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class Stream : public FileLike {
+
+public:
+ Stream(const char *name=NULL);
+ virtual ~Stream();
+
+ int putc(int c);
+ int puts(const char *s);
+ int getc();
+ char *gets(char *s, int size);
+ int printf(const char* format, ...);
+ int scanf(const char* format, ...);
+
+ operator std::FILE*() {return _file;}
+
+protected:
+ virtual int close();
+ virtual ssize_t write(const void* buffer, size_t length);
+ virtual ssize_t read(void* buffer, size_t length);
+ virtual off_t lseek(off_t offset, int whence);
+ virtual int isatty();
+ virtual int fsync();
+ virtual off_t flen();
+
+ virtual int _putc(int c) = 0;
+ virtual int _getc() = 0;
+
+ std::FILE *_file;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 Ticker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Ticker.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,117 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ * You can use as many seperate Ticker objects as you require.
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ * flip = !flip;
+ * }
+ *
+ * int main() {
+ * timer.attach(&attime, 5);
+ * while(1) {
+ * if(flip == 0) {
+ * led1 = !led1;
+ * } else {
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in seconds
+ */
+ void attach(void (*fptr)(void), float t) {
+ attach_us(fptr, t * 1000000.0f);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in seconds
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), float t) {
+ attach_us(tptr, mptr, t * 1000000.0f);
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ void attach_us(void (*fptr)(void), unsigned int t) {
+ _function.attach(fptr);
+ setup(t);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ template<typename T>
+ void attach_us(T* tptr, void (T::*mptr)(void), unsigned int t) {
+ _function.attach(tptr, mptr);
+ setup(t);
+ }
+
+ /** Detach the function
+ */
+ void detach();
+
+protected:
+ void setup(unsigned int t);
+ virtual void handler();
+
+ unsigned int _delay;
+ FunctionPointer _function;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 Timeout.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Timeout.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEOUT_H
+#define MBED_TIMEOUT_H
+
+#include "Ticker.h"
+
+namespace mbed {
+
+/** A Timeout is used to call a function at a point in the future
+ *
+ * You can use as many seperate Timeout objects as you require.
+ *
+ * Example:
+ * @code
+ * // Blink until timeout.
+ *
+ * #include "mbed.h"
+ *
+ * Timeout timeout;
+ * DigitalOut led(LED1);
+ *
+ * int on = 1;
+ *
+ * void attimeout() {
+ * on = 0;
+ * }
+ *
+ * int main() {
+ * timeout.attach(&attimeout, 5);
+ * while(on) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Timeout : public Ticker {
+
+protected:
+ virtual void handler();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 Timer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Timer.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMER_H
+#define MBED_TIMER_H
+
+#include "platform.h"
+
+namespace mbed {
+
+/** A general purpose timer
+ *
+ * Example:
+ * @code
+ * // Count the time to toggle a LED
+ *
+ * #include "mbed.h"
+ *
+ * Timer timer;
+ * DigitalOut led(LED1);
+ * int begin, end;
+ *
+ * int main() {
+ * timer.start();
+ * begin = timer.read_us();
+ * led = !led;
+ * end = timer.read_us();
+ * printf("Toggle the led takes %d us", end - begin);
+ * }
+ * @endcode
+ */
+class Timer {
+
+public:
+ Timer();
+
+ /** Start the timer
+ */
+ void start();
+
+ /** Stop the timer
+ */
+ void stop();
+
+ /** Reset the timer to 0.
+ *
+ * If it was already counting, it will continue
+ */
+ void reset();
+
+ /** Get the time passed in seconds
+ */
+ float read();
+
+ /** Get the time passed in mili-seconds
+ */
+ int read_ms();
+
+ /** Get the time passed in micro-seconds
+ */
+ int read_us();
+
+#ifdef MBED_OPERATORS
+ operator float();
+#endif
+
+protected:
+ int slicetime();
+ int _running; // whether the timer is running
+ unsigned int _start; // the start time of the latest slice
+ int _time; // any accumulated time from previous slices
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 TimerEvent.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TimerEvent.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEREVENT_H
+#define MBED_TIMEREVENT_H
+
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+/** Base abstraction for timer interrupts
+*/
+class TimerEvent {
+public:
+ TimerEvent();
+
+ /** The handler registered with the underlying timer interrupt
+ */
+ static void irq(uint32_t id);
+
+ /** Destruction removes it...
+ */
+ virtual ~TimerEvent();
+
+protected:
+ // The handler called to service the timer event of the derived class
+ virtual void handler() = 0;
+
+ // insert in to linked list
+ void insert(unsigned int timestamp);
+
+ // remove from linked list, if in it
+ void remove();
+
+ ticker_event_t event;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 05aad811ea07 analogin_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/analogin_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,39 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_API_H
+#define MBED_ANALOGIN_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct analogin_s analogin_t;
+
+void analogin_init (analogin_t *obj, PinName pin);
+float analogin_read (analogin_t *obj);
+uint16_t analogin_read_u16(analogin_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 analogout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/analogout_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct dac_s dac_t;
+
+void analogout_init (dac_t *obj, PinName pin);
+void analogout_free (dac_t *obj);
+void analogout_write (dac_t *obj, float value);
+void analogout_write_u16(dac_t *obj, uint16_t value);
+float analogout_read (dac_t *obj);
+uint16_t analogout_read_u16 (dac_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 can_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/can_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_API_H
+#define MBED_CAN_API_H
+
+#include "device.h"
+
+#if DEVICE_CAN
+
+#include "PinNames.h"
+#include "PeripheralNames.h"
+#include "can_helper.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_RX,
+ IRQ_TX,
+ IRQ_ERROR,
+ IRQ_OVERRUN,
+ IRQ_WAKEUP,
+ IRQ_PASSIVE,
+ IRQ_ARB,
+ IRQ_BUS,
+ IRQ_READY
+} CanIrqType;
+
+
+typedef enum {
+ MODE_RESET,
+ MODE_NORMAL,
+ MODE_SILENT,
+ MODE_TEST_GLOBAL,
+ MODE_TEST_LOCAL,
+ MODE_TEST_SILENT
+} CanMode;
+
+typedef void (*can_irq_handler)(uint32_t id, CanIrqType type);
+
+typedef struct can_s can_t;
+
+void can_init (can_t *obj, PinName rd, PinName td);
+void can_free (can_t *obj);
+int can_frequency(can_t *obj, int hz);
+
+void can_irq_init (can_t *obj, can_irq_handler handler, uint32_t id);
+void can_irq_free (can_t *obj);
+void can_irq_set (can_t *obj, CanIrqType irq, uint32_t enable);
+
+int can_write (can_t *obj, CAN_Message, int cc);
+int can_read (can_t *obj, CAN_Message *msg, int handle);
+int can_mode (can_t *obj, CanMode mode);
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle);
+void can_reset (can_t *obj);
+unsigned char can_rderror (can_t *obj);
+unsigned char can_tderror (can_t *obj);
+void can_monitor (can_t *obj, int silent);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif // MBED_CAN_API_H
+
+#endif
diff -r 000000000000 -r 05aad811ea07 can_helper.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/can_helper.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+ CANStandard = 0,
+ CANExtended = 1,
+ CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+ CANData = 0,
+ CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+ unsigned int id; // 29 bit identifier
+ unsigned char data[8]; // Data field
+ unsigned char len; // Length of data field in bytes
+ CANFormat format; // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+ CANType type; // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H
diff -r 000000000000 -r 05aad811ea07 error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/error.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,68 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 ethernet_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/ethernet_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_API_H
+#define MBED_ETHERNET_API_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Connection constants
+
+int ethernet_init(void);
+void ethernet_free(void);
+
+// write size bytes from data to ethernet buffer
+// return num bytes written
+// or -1 if size is too big
+int ethernet_write(const char *data, int size);
+
+// send ethernet write buffer, returning the packet size sent
+int ethernet_send(void);
+
+// recieve from ethernet buffer, returning packet size, or 0 if no packet
+int ethernet_receive(void);
+
+// read size bytes in to data, return actual num bytes read (0..size)
+// if data == NULL, throw the bytes away
+int ethernet_read(char *data, int size);
+
+// get the ethernet address
+void ethernet_address(char *mac);
+
+// see if the link is up
+int ethernet_link(void);
+
+// force link settings
+void ethernet_set_link(int speed, int duplex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
diff -r 000000000000 -r 05aad811ea07 gpio_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/gpio_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_API_H
+#define MBED_GPIO_API_H
+
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set the given pin as GPIO
+ * @param pin The pin to be set as GPIO
+ * @return The GPIO port mask for this pin
+ **/
+uint32_t gpio_set(PinName pin);
+
+/* GPIO object */
+void gpio_init(gpio_t *obj, PinName pin);
+
+void gpio_mode (gpio_t *obj, PinMode mode);
+void gpio_dir (gpio_t *obj, PinDirection direction);
+
+void gpio_write(gpio_t *obj, int value);
+int gpio_read (gpio_t *obj);
+
+// the following set of functions are generic and are implemented in the common gpio.c file
+void gpio_init_in(gpio_t* gpio, PinName pin);
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode);
+void gpio_init_out(gpio_t* gpio, PinName pin);
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value);
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 gpio_irq_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/gpio_irq_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_IRQ_API_H
+#define MBED_GPIO_IRQ_API_H
+
+#include "device.h"
+
+#if DEVICE_INTERRUPTIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_NONE,
+ IRQ_RISE,
+ IRQ_FALL
+} gpio_irq_event;
+
+typedef struct gpio_irq_s gpio_irq_t;
+
+typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
+void gpio_irq_free(gpio_irq_t *obj);
+void gpio_irq_set (gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
+void gpio_irq_enable(gpio_irq_t *obj);
+void gpio_irq_disable(gpio_irq_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 i2c_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/i2c_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_API_H
+#define MBED_I2C_API_H
+
+#include "device.h"
+
+#if DEVICE_I2C
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct i2c_s i2c_t;
+
+enum {
+ I2C_ERROR_NO_SLAVE = -1,
+ I2C_ERROR_BUS_BUSY = -2
+};
+
+void i2c_init (i2c_t *obj, PinName sda, PinName scl);
+void i2c_frequency (i2c_t *obj, int hz);
+int i2c_start (i2c_t *obj);
+int i2c_stop (i2c_t *obj);
+int i2c_read (i2c_t *obj, int address, char *data, int length, int stop);
+int i2c_write (i2c_t *obj, int address, const char *data, int length, int stop);
+void i2c_reset (i2c_t *obj);
+int i2c_byte_read (i2c_t *obj, int last);
+int i2c_byte_write (i2c_t *obj, int data);
+
+#if DEVICE_I2CSLAVE
+void i2c_slave_mode (i2c_t *obj, int enable_slave);
+int i2c_slave_receive(i2c_t *obj);
+int i2c_slave_read (i2c_t *obj, char *data, int length);
+int i2c_slave_write (i2c_t *obj, const char *data, int length);
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 mbed.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.h Tue Mar 10 09:51:52 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_H +#define MBED_H + +#define MBED_LIBRARY_VERSION 83 + +#include "platform.h" + +// Useful C libraries +#include <math.h> +#include <time.h> + +// mbed Debug libraries +#include "error.h" +#include "mbed_interface.h" + +// mbed Peripheral components +#include "DigitalIn.h" +#include "DigitalOut.h" +#include "DigitalInOut.h" +#include "BusIn.h" +#include "BusOut.h" +#include "BusInOut.h" +#include "PortIn.h" +#include "PortInOut.h" +#include "PortOut.h" +#include "AnalogIn.h" +#include "AnalogOut.h" +#include "PwmOut.h" +#include "Serial.h" +#include "SPI.h" +#include "SPISlave.h" +#include "I2C.h" +#include "I2CSlave.h" +#include "Ethernet.h" +#include "CAN.h" +#include "RawSerial.h" + +// mbed Internal components +#include "Timer.h" +#include "Ticker.h" +#include "Timeout.h" +#include "LocalFileSystem.h" +#include "InterruptIn.h" +#include "wait_api.h" +#include "sleep_api.h" +#include "rtc_time.h" + +using namespace mbed; +using namespace std; + +#endif
diff -r 000000000000 -r 05aad811ea07 mbed_debug.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_debug.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+ if (condition == 1) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+ }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 mbed_interface.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_interface.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ * @returns
+ * 1 if interface is connected,
+ * 0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ * This is a weak function that can be overwritten if required
+ *
+ * @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ * @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 pinmap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pinmap.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,43 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINMAP_H
+#define MBED_PINMAP_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ int peripheral;
+ int function;
+} PinMap;
+
+void pin_function(PinName pin, int function);
+void pin_mode (PinName pin, PinMode mode);
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_merge (uint32_t a, uint32_t b);
+void pinmap_pinout (PinName pin, const PinMap *map);
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 platform.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/platform.h Tue Mar 10 09:51:52 2015 +0000 @@ -0,0 +1,30 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PLATFORM_H +#define MBED_PLATFORM_H + +#define MBED_OPERATORS 1 + +#include "device.h" +#include "PinNames.h" +#include "PeripheralNames.h" + +#include <cstddef> +#include <cstdlib> +#include <cstdio> +#include <cstring> + +#endif
diff -r 000000000000 -r 05aad811ea07 port_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTMAP_H
+#define MBED_PORTMAP_H
+
+#include "device.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct port_s port_t;
+
+PinName port_pin(PortName port, int pin_n);
+
+void port_init (port_t *obj, PortName port, int mask, PinDirection dir);
+void port_mode (port_t *obj, PinMode mode);
+void port_dir (port_t *obj, PinDirection dir);
+void port_write(port_t *obj, int value);
+int port_read (port_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 pwmout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pwmout_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct pwmout_s pwmout_t;
+
+void pwmout_init (pwmout_t* obj, PinName pin);
+void pwmout_free (pwmout_t* obj);
+
+void pwmout_write (pwmout_t* obj, float percent);
+float pwmout_read (pwmout_t* obj);
+
+void pwmout_period (pwmout_t* obj, float seconds);
+void pwmout_period_ms (pwmout_t* obj, int ms);
+void pwmout_period_us (pwmout_t* obj, int us);
+
+void pwmout_pulsewidth (pwmout_t* obj, float seconds);
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
+void pwmout_pulsewidth_us(pwmout_t* obj, int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 rtc_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtc_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RTC_API_H
+#define MBED_RTC_API_H
+
+#include "device.h"
+
+#if DEVICE_RTC
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void rtc_init(void);
+void rtc_free(void);
+int rtc_isenabled(void);
+
+time_t rtc_read(void);
+void rtc_write(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 rtc_time.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtc_time.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ * while(1) {
+ * time_t seconds = time(NULL);
+ *
+ * printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ * printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ * char buffer[32];
+ * strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ * printf("Time as a custom formatted string = %s", buffer);
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 05aad811ea07 semihost_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/semihost_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+inline int __semihost(int reason, const void *arg) {
+ return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+# define AngelSWI 0xAB
+# define AngelSWIInsn "bkpt"
+# define AngelSWIAsm bkpt
+#else
+# define AngelSWI 0x123456
+# define AngelSWIInsn "swi"
+# define AngelSWIAsm swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+ int value;
+
+ asm volatile (
+ "mov r0, %1" "\n\t"
+ "mov r1, %2" "\n\t"
+ AngelSWIInsn " %a3" "\n\t"
+ "mov %0, r0"
+ : "=r" (value) /* output operands */
+ : "r" (reason), "r" (arg), "i" (AngelSWI) /* input operands */
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" /* list of clobbered registers */
+ );
+
+ return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 serial_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/serial_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+
+#if DEVICE_SERIAL
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ParityNone = 0,
+ ParityOdd = 1,
+ ParityEven = 2,
+ ParityForced1 = 3,
+ ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+ RxIrq,
+ TxIrq
+} SerialIrq;
+
+typedef enum {
+ FlowControlNone,
+ FlowControlRTS,
+ FlowControlCTS,
+ FlowControlRTSCTS
+} FlowControl;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+typedef struct serial_s serial_t;
+
+void serial_init (serial_t *obj, PinName tx, PinName rx);
+void serial_free (serial_t *obj);
+void serial_baud (serial_t *obj, int baudrate);
+void serial_format (serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+void serial_irq_set (serial_t *obj, SerialIrq irq, uint32_t enable);
+
+int serial_getc (serial_t *obj);
+void serial_putc (serial_t *obj, int c);
+int serial_readable (serial_t *obj);
+int serial_writable (serial_t *obj);
+void serial_clear (serial_t *obj);
+
+void serial_break_set (serial_t *obj);
+void serial_break_clear(serial_t *obj);
+
+void serial_pinout_tx(PinName tx);
+
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 sleep_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sleep_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_API_H
+#define MBED_SLEEP_API_H
+
+#include "device.h"
+
+#if DEVICE_SLEEP
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void sleep(void);
+
+/** Send the microcontroller to deep sleep
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void deepsleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 spi_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/spi_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_API_H
+#define MBED_SPI_API_H
+
+#include "device.h"
+
+#if DEVICE_SPI
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct spi_s spi_t;
+
+void spi_init (spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+void spi_free (spi_t *obj);
+void spi_format (spi_t *obj, int bits, int mode, int slave);
+void spi_frequency (spi_t *obj, int hz);
+int spi_master_write (spi_t *obj, int value);
+int spi_slave_receive(spi_t *obj);
+int spi_slave_read (spi_t *obj);
+void spi_slave_write (spi_t *obj, int value);
+int spi_busy (spi_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 toolchain.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/toolchain.h Tue Mar 10 09:51:52 2015 +0000 @@ -0,0 +1,35 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_TOOLCHAIN_H +#define MBED_TOOLCHAIN_H + +#if defined(TOOLCHAIN_ARM) +#include <rt_sys.h> +#endif + +#ifndef FILEHANDLE +typedef int FILEHANDLE; +#endif + +#if defined (__ICCARM__) +# define WEAK __weak +# define PACKED __packed +#else +# define WEAK __attribute__((weak)) +# define PACKED __attribute__((packed)) +#endif + +#endif
diff -r 000000000000 -r 05aad811ea07 us_ticker_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/us_ticker_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_US_TICKER_API_H
+#define MBED_US_TICKER_API_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+uint32_t us_ticker_read(void);
+
+typedef void (*ticker_event_handler)(uint32_t id);
+void us_ticker_set_handler(ticker_event_handler handler);
+
+typedef struct ticker_event_s {
+ uint32_t timestamp;
+ uint32_t id;
+ struct ticker_event_s *next;
+} ticker_event_t;
+
+void us_ticker_init(void);
+void us_ticker_set_interrupt(unsigned int timestamp);
+void us_ticker_disable_interrupt(void);
+void us_ticker_clear_interrupt(void);
+void us_ticker_irq_handler(void);
+
+void us_ticker_insert_event(ticker_event_t *obj, unsigned int timestamp, uint32_t id);
+void us_ticker_remove_event(ticker_event_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 05aad811ea07 wait_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/wait_api.h Tue Mar 10 09:51:52 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_WAIT_API_H
+#define MBED_WAIT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Generic wait functions.
+ *
+ * These provide simple NOP type wait capabilities.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * DigitalOut heartbeat(LED1);
+ *
+ * int main() {
+ * while (1) {
+ * heartbeat = 1;
+ * wait(0.5);
+ * heartbeat = 0;
+ * wait(0.5);
+ * }
+ * }
+ */
+
+/** Waits for a number of seconds, with microsecond resolution (within
+ * the accuracy of single precision floating point).
+ *
+ * @param s number of seconds to wait
+ */
+void wait(float s);
+
+/** Waits a number of milliseconds.
+ *
+ * @param ms the whole number of milliseconds to wait
+ */
+void wait_ms(int ms);
+
+/** Waits a number of microseconds.
+ *
+ * @param us the whole number of microseconds to wait
+ */
+void wait_us(int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif