This is an example application demonstrating building an EtherCAT system using Esmacat
Dependencies: EsmacatShield X_NUCLEO_IHM01A1
Basic Information of Esmacat
Information about Esmacat and EASE is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Homepage
Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Hardware-Setup
Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Software
About this example
This is an example application to demonstrate the ease with which a system, which communicates over EtherCAT, can be build. It measures the RPM of a motor using a proximity sensor.
Following lists the hardware required
- 2 x Mbed boards with Arduino UNO form factor (NUCLEO-F103RB)
- 2 x EASE boards
- 1 x proximity sensor shield (X_NUCLEO_6180XA1)
- 1 x Motor shield (X-NUCLEO-IHM01A1)
- 1 x stepper motor
- 1 x Ethernet POE injector with a 24VDC power supply
- 2 x Ethernet cables
- Keyboard, mouse, and monitor
- PC with Linux/Windows OS installed
- DC power supply for motor
Click here to know more about this Example
Diff: X_NUCLEO_IHM01A1.lib
- Revision:
- 4:cd1b33180e79
- Parent:
- 3:fffa53c7aed2
- Child:
- 5:8065b587ade0
diff -r fffa53c7aed2 -r cd1b33180e79 X_NUCLEO_IHM01A1.lib --- a/X_NUCLEO_IHM01A1.lib Wed Nov 18 18:45:35 2015 +0000 +++ b/X_NUCLEO_IHM01A1.lib Thu Nov 19 14:26:05 2015 +0000 @@ -1,1 +1,1 @@ -https://developer.mbed.org/teams/ST-Expansion-SW-Team/code/X_NUCLEO_IHM01A1/#d3c78f12a78d +https://developer.mbed.org/teams/ST-Expansion-SW-Team/code/X_NUCLEO_IHM01A1/#a47569fc7534