Esmacat HarmonicBionics
This is an example application demonstrating building an EtherCAT system using Esmacat
Dependencies: EsmacatShield X_NUCLEO_IHM01A1
Basic Information of Esmacat
Information about Esmacat and EASE is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Homepage
Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Hardware-Setup
Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Software
About this example
This is an example application to demonstrate the ease with which a system, which communicates over EtherCAT, can be build. It measures the RPM of a motor using a proximity sensor.
Following lists the hardware required
- 2 x Mbed boards with Arduino UNO form factor (NUCLEO-F103RB)
- 2 x EASE boards
- 1 x proximity sensor shield (X_NUCLEO_6180XA1)
- 1 x Motor shield (X-NUCLEO-IHM01A1)
- 1 x stepper motor
- 1 x Ethernet POE injector with a 24VDC power supply
- 2 x Ethernet cables
- Keyboard, mouse, and monitor
- PC with Linux/Windows OS installed
- DC power supply for motor
Click here to know more about this Example
Revisions of EsmacatShield.lib
| Revision | Date | Message | Actions |
|---|---|---|---|
| 39:1270497828ca | 2020-02-06 | The is an example code to demonstrate the working of EASE, an EtherCAT shield with Motor Shield +Base Board with a form factor of Arduino UNO | File Diff Annotate |