This is an example application demonstrating building an EtherCAT system using Esmacat

Dependencies:   EsmacatShield X_NUCLEO_IHM01A1

Basic Information of Esmacat

Information about Esmacat and EASE is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Homepage

Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Hardware-Setup

Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Software

About this example

This is an example application to demonstrate the ease with which a system, which communicates over EtherCAT, can be build. It measures the RPM of a motor using a proximity sensor.

Following lists the hardware required

  • 2 x Mbed boards with Arduino UNO form factor (NUCLEO-F103RB)
  • 2 x EASE boards
  • 1 x proximity sensor shield (X_NUCLEO_6180XA1)
  • 1 x Motor shield (X-NUCLEO-IHM01A1)
  • 1 x stepper motor
  • 1 x Ethernet POE injector with a 24VDC power supply
  • 2 x Ethernet cables
  • Keyboard, mouse, and monitor
  • PC with Linux/Windows OS installed
  • DC power supply for motor

https://os.mbed.com/media/uploads/pratima_hb/system_pic1.jpg

Click here to know more about this Example

Committer:
Davidroid
Date:
Mon Mar 13 17:46:46 2017 +0000
Revision:
37:70d96b1ecb98
Parent:
36:a9f1080a7875
Updated with the new version of the library.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Davidroid 37:70d96b1ecb98 1 http://developer.mbed.org/teams/ST/code/X_NUCLEO_IHM01A1/#974ca699c792