![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Build an EtherCAT Slave
Quick Build EtherCAT Slave
Esmacat is an easy yet powerful EtherCAT solution for robot mechatronics developed by Harmonic Bionics. It provides a full EtherCAT hardware and software solution for Master and Slave devices which allows developers to set up and run an EtherCAT application within minutes. It also supports Power-over-EtherCAT (POE) technology which allows high-speed communication and logic-power supply over a single Ethernet cable simplifying the cabling and wiring needs of the system significantly.
EtherCAT Arduino Shield by Esmacat (EASE) is a shield which can be used to build a Slave device. It stacks onto Mbed boards with form factor of Arduino UNO. The Mbed Base board communicates with EASE over SPI. EASE communicates with the Master over EtherCAT. Multiple EASE boards can be connected with Ethernet cables in a daisy-chain topology.
Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Hardware-Setup
Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/esmacat/code/EASE_Example/wiki/Software
main.cpp
- Committer:
- pratima_hb
- Date:
- 2020-01-30
- Revision:
- 0:ba190577ec8a
- Child:
- 1:ee9b73e47960
File content as of revision 0:ba190577ec8a:
#include "mbed.h" #include <EsmacatShield.h> //Include EsmacatShield Library int counter; int v[8]; //an array of integer is declared for reading the //data packet of EtherCAT from EASE 8 registers Serial pc(USBTX, USBRX); // Configuring the serial port to host PC DigitalOut selectPin(D10); // D10 is used to drive chip enable low SPI spi(D11, D12, D13); // mosi, miso, sclk int main() { EsmacatShield slave(spi, selectPin); //Create an Esmacat slave object with defined // spi and chip SelectPin slave.setup_spi(); //Setup SPI for EASE while(1) { slave.get_ecat_registers(v); //read all registers slave.write_reg_value(0,counter++, true); //Write register data (register,value, led_on) wait_us(1000000); //sleep for 1000 ms slave.write_reg_value(0,counter++, false); //Write register data (register,value, led_on) wait_us(1000000); //sleep for 1000 ms pc.printf("Next Iteration \n"); for (int i=0;i<8;i++) //Print out read registers to host PC terminal { pc.printf("%d",i); pc.printf("\t"); pc.printf("%d",v[i]); pc.printf("\n"); } } }