Diff: targets/hal/TARGET_NXP/TARGET_LPC43XX/PeripheralNames.h

Revision:

20:4263a77256ae

Child:

256:76fd9a263045

diff -r 398f4c622e1b -r 4263a77256ae targets/hal/TARGET_NXP/TARGET_LPC43XX/PeripheralNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/PeripheralNames.h	Tue Sep 10 15:14:19 2013 +0300
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)LPC_USART0_BASE,
+    UART_1 = (int)LPC_UART1_BASE,
+    UART_2 = (int)LPC_USART2_BASE,
+    UART_3 = (int)LPC_USART3_BASE
+} UARTName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2,
+    ADC0_3,
+    ADC0_4,
+    ADC0_5,
+    ADC0_6,
+    ADC0_7,
+    ADC1_0,
+    ADC1_1,
+    ADC1_2,
+    ADC1_3,
+    ADC1_4,
+    ADC1_5,
+    ADC1_6,
+    ADC1_7
+} ADCName;
+
+typedef enum {
+    DAC_0 = 0
+} DACName;
+
+typedef enum {
+    SPI_0 = (int)LPC_SSP0_BASE,
+    SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+    I2C_0 = (int)LPC_I2C0_BASE,
+    I2C_1 = (int)LPC_I2C1_BASE
+} I2CName;
+
+typedef enum {
+    PWM0_1 = 1,
+    PWM0_2,
+    PWM0_3,
+    PWM1_1,
+    PWM1_2,
+    PWM1_3,
+    PWM2_1,
+    PWM2_2,
+    PWM2_3
+} PWMName;
+
+typedef enum {
+     CAN_0 = (int)LPC_C_CAN0_BASE,
+     CAN_1 = (int)LPC_C_CAN1_BASE
+} CANName;
+
+#define STDIO_UART_TX     UART0_TX
+#define STDIO_UART_RX     UART0_RX
+#define STDIO_UART        UART_0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif