File content as of revision 0:d2e117716219:

#include "ControllerLoop.h"
using namespace std;

// contructor for controller loop
ControllerLoop::ControllerLoop(float Ts) : thread(osPriorityHigh,4096), dout1(PB_9)
{
    this->Ts = Ts;
    diff1.reset(0.0f,0);
    diff2.reset(0.0f,0);
    is_initialized = false;
    ti.reset();
    ti.start();
    data.laser_on = false;
    }

// decontructor for controller loop
ControllerLoop::~ControllerLoop() {}

// ----------------------------------------------------------------------------
// this is the main loop called every Ts with high priority
void ControllerLoop::loop(void){
    float w01=2*3.1415927 * 8;
    float xy[2];
    while(1)
        {
        ThisThread::flags_wait_any(threadFlag);
        // THE LOOP ------------------------------------------------------------
        short c1 = counter1 - index1.positionAtIndexPulse - mk.inc_offset[0]- mk.inc_additional_offset[0];            // get counts from Encoder
        short c2 = counter2 - index2.positionAtIndexPulse - mk.inc_offset[1]- mk.inc_additional_offset[1];            // get counts from Encoder
        data.sens_phi[0] = uw2pi1(2.0f*3.1415927f/4000.0f*(float)c1);
        data.sens_Vphi[0] = diff1(c1);                 // motor velocity 
        data.sens_phi[1] = uw2pi2(2.0f*3.1415927f/4000.0f*(float)c2);
        data.sens_Vphi[1] = diff2(c2);                 // motor velocity
        // -------------------------------------------------------------
        // at very beginning: move system slowly to find the zero pulse
        // set "if(0)" if you like to ommit at beginning
        if(0)//!is_initialized)
            {
            find_index();
            if(index1.positionAtIndexPulse != 0 && index2.positionAtIndexPulse != 0) 
                is_initialized=true;
            }
        else
            {
            // ------------------------ do the control first

            // calculate desired currents here, you can do "anything" here, 
            // if you like to refer to values e.g. from the gui or from the trafo,
            // please use data.xxx values, they are calculated 30 lines below

            data.i_des[0] = data.i_des[1] =0.0;
        
            // ------------------------ write outputs
            i_des1.write(i2u(data.i_des[0]));
            i_des2.write(i2u(data.i_des[1]));
            // GPA: if you want to use the GPA, uncomment and improve following line:
            // exc = myGPA(data.i_des[0],data.sens_Vphi[0]);
            
            // now do trafos etc

            if(mk.external_control) // get desired values from external source (GUI)
                {
                if(mk.trafo_is_on)  // use desired xy values from xternal source and transform
                                    // otherwise external source delivers phi1, phi2 values directly
                    {
                    bool dum = mk.X2P(data.cntrl_xy_des,data.cntrl_phi_des);
                    }
                }
            else        // this is called, when desired values are calculated here internally (e.g. pathplanner)
                {
                if(mk.trafo_is_on)
                    {
                    data.cntrl_xy_des[0] = 30.0f*cosf(w01*glob_ti.read());      // make a circle in xy-co-ordinates
                    data.cntrl_xy_des[1] = 30.0f*sinf(w01*glob_ti.read());
                    bool dum = mk.X2P(data.cntrl_xy_des,data.cntrl_phi_des);
                    }
                else
                    {
                    data.cntrl_phi_des[0] = .250f*cosf(w01*glob_ti.read());     // make some harmonic movements directly on phi1/phi2
                    data.cntrl_phi_des[1] = .250f*sinf(w01*glob_ti.read());
                    }
                }
            bool dum = mk.P2X(data.sens_phi,data.est_xy);       // calculate actual xy-values, uncomment this if there are timing issues
            //current_path->get_x_v(glob_ti.read(),&phi_des,&v_des);
            }       // else(..) 
        laser_on = data.laser_on;
        i_enable = big_button;
        }// endof the main loop
}

void ControllerLoop::sendSignal() {
    thread.flags_set(threadFlag);
}
void ControllerLoop::start_loop(void)
{
    thread.start(callback(this, &ControllerLoop::loop));
    ticker.attach(callback(this, &ControllerLoop::sendSignal), Ts);
}

float ControllerLoop::pos_cntrl(float d_phi)
{
   
   // write position controller here
   return 0.0;
    }

void ControllerLoop::init_controllers(void)
{
    // set values for your velocity and position controller here!
    
    
}
// find_index: move axis slowly to detect the zero-pulse
void ControllerLoop::find_index(void)
{
    // use a simple P-controller to get system spinning, add a constant current to overcome friction
    float Kp = 0.005;
    float i1 = 0.2f + Kp*(50.0f - data.sens_Vphi[0]);
    float i2 = 0.2f + Kp*(50.0f - data.sens_Vphi[1]) ;
    i_des1.write(i2u(i1));
    i_des2.write(i2u(i2));
    }