Diff: TARGET_KL46Z/core_cmInstr.h

Revision:

73:1efda918f0ba

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL46Z/core_cmInstr.h	Mon Dec 09 18:43:03 2013 +0200
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V3.20
+ * @date     05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+#define __ISB()                           __isb(0xF)
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB()                           __dsb(0xF)
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+#define __DMB()                           __dmb(0xF)
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __RBIT                            __rbit
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function performs a exclusive LDR command for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr)                     ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function performs a exclusive LDR command for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr)                     ((uint16_t) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function performs a exclusive LDR command for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr)                     ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function performs a exclusive STR command for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXB(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function performs a exclusive STR command for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXH(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function performs a exclusive STR command for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXW(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX                           __clrex
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+  __ASM volatile ("nop");
+}
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+  __ASM volatile ("wfi");
+}
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+  __ASM volatile ("wfe");
+}
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+  __ASM volatile ("sev");
+}
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+  __ASM volatile ("isb");
+}
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+  __ASM volatile ("dsb");
+}
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+  __ASM volatile ("dmb");
+}
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+  return __builtin_bswap32(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+  return (short)__builtin_bswap16(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  return (op1 >> op2) | (op1 << (32 - op2)); 
+}
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __ASM volatile ("bkpt "#value)
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function performs a exclusive LDR command for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function performs a exclusive LDR command for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return(result);
+}
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function performs a exclusive LDR command for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function performs a exclusive STR command for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function performs a exclusive STR command for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function performs a exclusive STR command for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+  __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+   uint32_t result;
+
+  __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+  return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */