Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_adc_ex.h

Revision:

84:0b3ab51c8877

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_adc_ex.h	Mon May 19 18:14:09 2014 +0100
@@ -0,0 +1,121 @@
+/**
+  ******************************************************************************
+  * @file    stm32l0xx_hal_adc_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    22-April-2014
+  * @brief  This file contains all the functions prototypes for the ADC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_ADC_EX_H
+#define __STM32L0xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_def.h"
+  
+/** @addtogroup STM32L0xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants
+  * @{
+  */
+
+ /** @defgroup ADCEx_TimeOut_Values
+  * @{
+  */ 
+#define ADC_CALIBRATION_TIMEOUT       10
+/**
+  * @}
+  */
+   
+  
+/** @defgroup ADCEx_Channel_Mode 
+  * @{
+  */   
+#define ADC_SINGLE_ENDED                        (uint32_t)0x00000000   /* dummy value */
+#define IS_ADC_SINGLE_DIFFERENTIAL(SING_DIFF)   ((SING_DIFF) == ADC_SINGLE_ENDED)
+/**
+  * @}
+  */
+    
+/** @defgroup ADCEx_calibration_factor_length_verification
+  * @{
+  */ 
+/**
+  * @brief Calibration factor lenght verification (7 bits maximum)
+  * @param _Calibration_Factor_: Calibration factor value
+  * @retval None
+  */
+#define IS_ADC_CALFACT(_Calibration_Factor_) ((_Calibration_Factor_) <= ((uint32_t)0x7F))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+   
+/* Exported functions --------------------------------------------------------*/  
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef   HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+uint32_t            HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+HAL_StatusTypeDef   HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef* hadc, uint32_t SingleDiff, uint32_t CalibrationFactor);
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32L0xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/