erez i
version_2.0
Dependents: cc3000_ping_demo_try_2
Fork of
cc3000_hostdriver_mbedsocket
by 
Martin Kojtal
Diff: cc3000.h
- Revision:
- 29:c40918cd9b6d
- Parent:
- 27:5118ab0f6aa4
- Child:
- 30:251a0a7d88de
--- a/cc3000.h Sat Oct 05 20:29:39 2013 +0200
+++ b/cc3000.h Sun Oct 06 17:17:48 2013 +0200
@@ -76,7 +76,7 @@
#else
#define DBG_SOCKET(x, ...) std::printf("[CC3000 : SOCKET] "x"\r\n", ##__VA_ARGS__);
#endif
-
+
#else
#define DBG_SOCKET(x, ...)
#endif
@@ -88,7 +88,7 @@
#else
#define DBG_HCI(x, ...) std::printf("[CC3000 : HCI RX] "x"\r\n", ##__VA_ARGS__);
#endif
-
+
#else
#define DBG_HCI(x, ...)
#endif
@@ -100,7 +100,7 @@
#else
#define DBG_HCI_CMD(x, ...) std::printf("[CC3000 : HCI TX] "x"\r\n", ##__VA_ARGS__);
#endif
-
+
#else
#define DBG_HCI_CMD(x, ...)
#endif
@@ -113,7 +113,7 @@
#else
#define DBG_CC(x, ...) std::printf("[CC3000] "x"\r\n", ##__VA_ARGS__);
#endif
-
+
#else
#define DBG_CC(x, ...)
#endif
@@ -166,68 +166,149 @@
*/
bool get_tx_complete_signal();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_tx_complete_signal(bool value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint8_t *get_received_buffer();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_received_buffer(uint8_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint8_t *get_transmit_buffer();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_transmit_buffer(uint8_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_number_free_buffers();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_number_free_buffers(uint16_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_buffer_length();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_buffer_length(uint16_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_pending_data();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_pending_data(uint16_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_op_code();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_op_code(uint16_t code);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_released_packets();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_number_of_released_packets(uint16_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint16_t get_sent_packets();
/**
+ * \brief
+ * \param
+ * \return
*/
void set_sent_packets(uint16_t value);
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t get_transmit_error();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void set_transmit_error(int32_t value);
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
uint16_t get_buffer_size(void);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void set_buffer_size(uint16_t value);
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void *get_func_pointer(FunctionNumber function);
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
uint8_t *get_received_data(void);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void set_received_data(uint8_t *pointer);
-
private:
uint8_t _data_received_flag;
bool _tx_complete_signal;
@@ -259,20 +340,83 @@
*/
class cc3000_event {
public:
+ /**
+ * \brief
+ * \param
+ * \return
+ */
cc3000_event(cc3000_simple_link &simplelink, cc3000_hci &hci, cc3000_spi &spi, cc3000 &cc3000);
- ~cc3000_event();
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
+ ~cc3000_event();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void hci_unsol_handle_patch_request(uint8_t *event_hdr);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
uint8_t *hci_event_handler(void *ret_param, uint8_t *from, uint8_t *fromlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t hci_unsol_event_handler(uint8_t *event_hdr);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t hci_unsolicited_event_handler(void);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t get_socket_active_status(int32_t sd);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void set_socket_active_status(int32_t sd, int32_t status);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t hci_event_unsol_flowcontrol_handler(uint8_t *event);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void update_socket_active_status(uint8_t *resp_params);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void simplelink_wait_event(uint16_t op_code, void *ret_param);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void simplelink_wait_data(uint8_t *buffer, uint8_t *from, uint8_t *fromlen);
-
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void received_handler(uint8_t *buffer);
private:
uint32_t socket_active_status;
@@ -284,16 +428,66 @@
class cc3000_netapp {
public:
+ /**
+ * \brief
+ * \param
+ * \return
+ */
cc3000_netapp(cc3000_simple_link &simple_link, cc3000_nvmem &nvmem, cc3000_hci &hci, cc3000_event &event);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
~cc3000_netapp();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t config_mac_adrress(uint8_t *mac);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t dhcp(uint32_t *ip, uint32_t *subnet_mask,uint32_t *default_gateway, uint32_t *dns_server);
#ifndef CC3000_TINY_DRIVER
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void ipconfig(tNetappIpconfigRetArgs *ipconfig);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t timeout_values(uint32_t *dhcp, uint32_t *arp,uint32_t *keep_alive, uint32_t *inactivity);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t ping_send(uint32_t *ip, uint32_t ping_attempts, uint32_t ping_size, uint32_t ping_timeout);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void ping_report();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t ping_stop();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t arp_flush();
#endif
private:
@@ -306,13 +500,53 @@
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
class cc3000_security {
public:
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void expandKey(uint8_t *expanded_key, uint8_t *key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
uint8_t galois_mul2(uint8_t value);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void aes_encr(uint8_t *state, uint8_t *expanded_key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void aes_decr(uint8_t *state, uint8_t *expanded_key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void aes_encrypt(uint8_t *state, uint8_t *key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
void aes_decrypt(uint8_t *state, uint8_t *key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t aes_read_key(uint8_t *key);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t aes_write_key(uint8_t *key);
private:
uint8_t _expanded_key[176];
@@ -321,26 +555,121 @@
class cc3000_socket {
public:
+ /**
+ * \brief
+ * \param
+ * \return
+ */
cc3000_socket(cc3000_simple_link &simplelink, cc3000_hci &hci, cc3000_event &event);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
~cc3000_socket();
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t socket(int32_t domain, int32_t type, int32_t protocol);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t accept(int32_t sd, sockaddr *addr, socklen_t *addrlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t bind(int32_t sd, const sockaddr *addr, int32_t addrlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t HostFlowControlConsumeBuff(int32_t sd);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t closesocket(int32_t sd);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t listen(int32_t sd, int32_t backlog);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t connect(int32_t sd, const sockaddr *addr, int32_t addrlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t select(int32_t nfds, fd_set *readsds, fd_set *writesds, fd_set *exceptsds, struct timeval *timeout);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t getsockopt (int32_t sd, int32_t level, int32_t optname, void *optval, socklen_t *optlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t simple_link_recv(int32_t sd, void *buf, int32_t len, int32_t flags, sockaddr *from, socklen_t *fromlen, int32_t opcode);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t simple_link_send(int32_t sd, const void *buf, int32_t len, int32_t flags, const sockaddr *to, int32_t tolen, int32_t opcode);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t recv(int32_t sd, void *buf, int32_t len, int32_t flags);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t recvfrom(int32_t sd, void *buf, int32_t len, int32_t flags, sockaddr *from, socklen_t *fromlen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t send(int32_t sd, const void *buf, int32_t len, int32_t flags);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t sendto(int32_t sd, const void *buf, int32_t len, int32_t flags, const sockaddr *to, socklen_t tolen);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t mdns_advertiser(uint16_t mdns_enabled, uint8_t * device_service_name, uint16_t device_service_name_length);
#ifndef CC3000_TINY_DRIVER
int32_t gethostbyname(uint8_t *hostname, uint16_t name_length, uint32_t *out_ip_addr);
+ /**
+ * \brief
+ * \param
+ * \return
+ */
int32_t setsockopt(int32_t sd, int32_t level, int32_t optname, const void *optval, socklen_t optlen);
#endif
private:
@@ -376,33 +705,63 @@
*/
uint32_t first_write(uint8_t *buffer, uint16_t length);
/**
+ * \brief
+ * \param
+ * \return
*/
uint32_t write(uint8_t *buffer, uint16_t length);
/**
+ * \brief
+ * \param
+ * \return
*/
void write_synchronous(uint8_t *data, uint16_t size);
/**
+ * \brief
+ * \param
+ * \return
*/
void read_synchronous(uint8_t *data, uint16_t size);
/**
+ * \brief
+ * \param
+ * \return
*/
uint32_t read_data_cont();
/**
+ * \brief
+ * \param
+ * \return
*/
void wlan_irq_enable();
/**
+ * \brief
+ * \param
+ * \return
*/
void wlan_irq_disable();
/**
+ * \brief
+ * \param
+ * \return
*/
void wlan_irq_set(uint8_t value);
/**
+ * \brief
+ * \param
+ * \return
*/
uint32_t wlan_irq_read();
/**
+ * \brief
+ * \param
+ * \return
*/
void WLAN_IRQHandler();
/**
+ * \brief
+ * \param
+ * \return
*/
void write_wlan_en(uint8_t value);
private:
@@ -419,13 +778,56 @@
class cc3000_hci {
public:
+ /**
+ * \brief Ctor
+ * \param spi Reference to spi object.
+ * \return none
+ */
cc3000_hci(cc3000_spi &spi);
+ /**
+ * \brief Dtor
+ * \param none
+ * \return none
+ */
~cc3000_hci();
+ /**
+ * \brief Initiate an HCI command.
+ * \param op_code command operation code
+ * \param buffer pointer to the command's arguments buffer
+ * \param length length of the arguments
+ * \return ???
+ */
uint16_t command_send(uint16_t op_code, uint8_t *buffer, uint8_t length);
+ /**
+ * \brief Initiate an HCI data write operation
+ * \param op_code command operation code
+ * \param args pointer to the command's arguments buffer
+ * \param arg_length length of the arguments
+ * \param data_length length od data
+ * \param tail pointer to the data buffer
+ * \param tail_length buffer length
+ * \return ???
+ */
uint32_t data_send(uint8_t op_code, uint8_t *args, uint16_t arg_length,
uint16_t data_length, const uint8_t *tail, uint16_t tail_length);
+ /**
+ * \brief Prepare HCI header and initiate an HCI data write operation.
+ * \param op_code command operation code
+ * \param buffer pointer to the data buffer
+ * \param arg_length arguments length
+ * \param data_length data length
+ * \return none
+ */
void data_command_send(uint16_t op_code, uint8_t *buffer, uint8_t arg_length,
uint16_t data_length);
+ /**
+ * \brief Prepare HCI header and initiate an HCI patch write operation.
+ * \param op_code command operation code
+ * \param buffer pointer to the command's arguments buffer
+ * \param patch pointer to patch content buffer
+ * \param data_length data length
+ * \return none
+ */
void patch_send(uint8_t op_code, uint8_t *buffer, uint8_t *patch, uint16_t data_length);
private:
cc3000_spi &_spi;
@@ -433,15 +835,82 @@
class cc3000_nvmem {
public:
- cc3000_nvmem(cc3000_hci &hci, cc3000_event &_event,cc3000_simple_link &simple_link);
+ /**
+ * \brief Ctor
+ * \param hci Reference to hci object.
+ * \param event Reference to event object.
+ * \param simple_link Reference to simple link object.
+ * \return none
+ */
+ cc3000_nvmem(cc3000_hci &hci, cc3000_event &event, cc3000_simple_link &simple_link);
+ /**
+ * \brief Dtor
+ * \param none
+ * \return none
+ */
~cc3000_nvmem();
+ /**
+ * \brief Reads data from the file referred by the file_id parameter.
+ * Reads data from file offset till length. Err if the file can't be used,
+ * is invalid, or if the read is out of bounds.
+ * \param file_id nvmem file id.
+ * \param length number of bytes to read.
+ * \param offset offset in file from where to read.
+ * \param buff output buffer pointer.
+ * \return
+ * Number of bytes read, otherwise error.
+ */
int32_t read(uint32_t file_id, uint32_t length, uint32_t offset, uint8_t *buff);
+ /**
+ * \brief Write data to nvmem.
+ * \param file_id Nvmem file id
+ * \param length number of bytes to write
+ * \param entry_offset offset in file to start write operation from
+ * \param buff data to write
+ * \return
+ * On success 0, error otherwise.
+ */
int32_t write(uint32_t file_id, uint32_t length, uint32_t entry_offset, uint8_t *buff);
+ /**
+ * \brief Write MAC address to EEPROM.
+ * \param mac Mac address to be set
+ * \return
+ * On success 0, error otherwise.
+ */
uint8_t set_mac_address(uint8_t *mac);
+ /**
+ * \brief Read MAC address from EEPROM.
+ * \param mac Mac address
+ * \return
+ * on success 0, error otherwise.
+ */
uint8_t get_mac_address(uint8_t *mac);
+ /**
+ * \brief Program a patch to a specific file ID. The SP data is assumed to be organized in 2-dimensional.
+ * Each line is SP_PORTION_SIZE bytes long.
+ * \param file_id nvmem file id/
+ * \param length number of bytes to write
+ * \param data SP data to write
+ * \return
+ * On success 0, error otherwise.
+ */
uint8_t write_patch(uint32_t file_id, uint32_t length, const uint8_t *data);
+ /**
+ * \brief Create new file entry and allocate space on the NVMEM. Applies only to user files.
+ * \param file_id nvmem file Id
+ * \param new_len entry ulLength
+ * \return
+ */
int32_t create_entry(uint32_t file_id, uint32_t new_len);
#ifndef CC3000_TINY_DRIVER
+ /**
+ * \brief Read patch version. read package version (WiFi FW patch, river-supplicant-NS patch,
+ * bootloader patch)
+ * \param patch_ver First number indicates package ID and the second number indicates
+ * package build number
+ * \return
+ * On success 0, error otherwise.
+ */
uint8_t read_sp_version(uint8_t* patch_ver);
#endif
private:
@@ -452,46 +921,200 @@
class cc3000_wlan {
public:
+ /**
+ * \brief Ctor
+ * \param simple_link Reference to simple link object.
+ * \param event Reference to event object.
+ * \param spi Reference to spi object.
+ * \param hci Reference to hci object.
+ * \return none
+ */
cc3000_wlan(cc3000_simple_link &simple_link, cc3000_event &event, cc3000_spi &spi, cc3000_hci &hci);
+ /**
+ * \brief Dtor
+ * \param none
+ * \return none
+ */
~cc3000_wlan();
- /** Send SIMPLE LINK START to cc3000
- * \param patches_available_host Flag to indicate if patches are available
+ /**
+ * \brief Send SIMPLE LINK START to cc3000.
+ * \param patches_available_host Flag to indicate if patches are available.
* \return none
*/
void simpleLink_init_start(uint16_t patches_available_host);
- /** Start wlan device. Blocking call until init is completed
- * \param patches_available_host Flag to indicate if patches are available
+ /**
+ * \brief Start wlan device. Blocking call until init is completed.
+ * \param patches_available_host Flag to indicate if patches are available.
* \return none
*/
void start(uint16_t patches_available_host);
- /** Stop wlan device
+ /**
+ * \brief Stop wlan device
* \param none
* \return none
*/
void stop(void);
#ifndef CC3000_TINY_DRIVER
+ /**
+ * \brief Connect to AP.
+ * \param sec_type Security option.
+ * \param ssid up to 32 bytes, ASCII SSID
+ * \param ssid_length length of SSID
+ * \param b_ssid 6 bytes specified the AP bssid
+ * \param key up to 16 bytes specified the AP security key
+ * \param key_len key length
+ * \return
+ * On success, zero is returned. On error, negative is returned.
+ */
int32_t connect(uint32_t sec_type, const uint8_t *ssid, int32_t ssid_length, uint8_t *b_ssid, uint8_t *key, int32_t key_len);
+ /**
+ * \brief Add profile. Up to 7 profiles are supported.
+ * \param sec_type Security option.
+ * \param ssid Up to 32 bytes, ASCII SSID
+ * \param ssid_length Length of SSID
+ * \param b_ssid 6 bytes specified the AP bssid
+ * \param priority Up to 16 bytes specified the AP security key
+ * \param pairwise_cipher_or_tx_key_len Key length
+ * \param group_cipher_tx_key_index Key length for WEP security
+ * \param key_mgmt KEY management
+ * \param pf_or_key Security key
+ * \param pass_phrase_length Security key length for WPA\WPA2
+ * \return
+ * On success, zero is returned. On error, negative is returned.
+ */
int32_t add_profile(uint32_t sec_type, uint8_t* ssid, uint32_t ssid_length, uint8_t *b_ssid, uint32_t priority, uint32_t pairwise_cipher_or_tx_key_len, uint32_t group_cipher_tx_key_index,
uint32_t key_mgmt, uint8_t* pf_or_key, uint32_t pass_phrase_length);
+ /**
+ * \brief Gets entry from scan result table. The scan results are returned
+ * one by one, and each entry represents a single AP found in the area.
+ * \param scan_timeout Not supported yet
+ * \param results Scan result
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t ioctl_get_scan_results(uint32_t scan_timeout, uint8_t *results);
+ /**
+ * \brief Start and stop scan procedure. Set scan parameters.
+ * \param enable Start/stop application scan
+ * \param min_dwell_time Minimum dwell time value to be used for each channel, in ms. (Default: 20)
+ * \param max_dwell_time Maximum dwell time value to be used for each channel, in ms. (Default: 30)
+ * \param num_probe_requests Max probe request between dwell time. (Default:2)
+ * \param channel_mask Bitwise, up to 13 channels (0x1fff).
+ * \param rssi_threshold RSSI threshold. Saved: yes (Default: -80)
+ * \param snr_threshold NSR threshold. Saved: yes (Default: 0)
+ * \param default_tx_power probe Tx power. Saved: yes (Default: 205)
+ * \param interval_list Pointer to array with 16 entries (16 channels)
+ * \return
+ * On success, zero is returned. On error, -1 is returned.
+ */
int32_t ioctl_set_scan_params(uint32_t enable, uint32_t min_dwell_time, uint32_t max_dwell_time, uint32_t num_probe_requests,
uint32_t channel_mask, int32_t rssi_threshold, uint32_t snr_threshold, uint32_t default_tx_power, uint32_t *interval_list);
+ /**
+ * \brief Get wlan status: disconnected, scanning, connecting or connected
+ * \param none
+ * \return
+ * WLAN_STATUS_DISCONNECTED, WLAN_STATUS_SCANING, STATUS_CONNECTING or WLAN_STATUS_CONNECTED
+ */
int32_t ioctl_statusget(void);
#else
+ /**
+ * \brief Connect to AP
+ * \param ssid Up to 32 bytes and is ASCII SSID of the AP
+ * \param ssid_length Length of the SSID
+ * \return
+ * On success, zero is returned. On error, negative is returned.
+ */
int32_t connect(const uint8_t *ssid, int32_t ssid_length);
+ /**
+ * \brief When auto start is enabled, the device connects to station from the profiles table.
+ * If several profiles configured the device choose the highest priority profile.
+ * \param sec_type WLAN_SEC_UNSEC,WLAN_SEC_WEP,WLAN_SEC_WPA,WLAN_SEC_WPA2
+ * \param ssid SSID up to 32 bytes
+ * \param ssid_length SSID length
+ * \param b_ssid bssid 6 bytes
+ * \param priority Profile priority. Lowest priority:0.
+ * \param pairwise_cipher_or_tx_key_len Key length for WEP security
+ * \param group_cipher_tx_key_index Key index
+ * \param key_mgmt KEY management
+ * \param pf_or_key Security key
+ * \param pass_phrase_length Security key length for WPA\WPA2
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t add_profile(uint32_t sec_type, uint8_t *ssid, uint32_t ssid_length, uint8_t *b_ssid, uint32_t priority,
uint32_t pairwise_cipher_or_tx_key_len, uint32_t group_cipher_tx_key_index, uint32_t key_mgmt,
uint8_t* pf_or_key, uint32_t pass_phrase_length);
#endif
#ifndef CC3000_UNENCRYPTED_SMART_CONFIG
+ /**
+ * \brief Process the acquired data and store it as a profile.
+ * \param none
+ * \return
+ * On success, zero is returned. On error, -1 is returned.
+ */
int32_t smart_config_process(void);
#endif
+ /**
+ * \brief Disconnect connection from AP.
+ * \param none
+ * \return
+ * 0 if disconnected done, other CC3000 already disconnected.
+ */
int32_t disconnect();
+ /**
+ * \brief When auto is enabled, the device tries to connect according the following policy:
+ * 1) If fast connect is enabled and last connection is valid, the device will try to
+ * connect to it without the scanning procedure (fast). The last connection will be
+ * marked as invalid, due to adding/removing profile.
+ * 2) If profile exists, the device will try to connect it (Up to seven profiles).
+ * 3) If fast and profiles are not found, and open mode is enabled, the device
+ * will try to connect to any AP.
+ * Note that the policy settings are stored in the CC3000 NVMEM.
+ * \param should_connect_to_open_ap Enable(1), disable(0) connect to any available AP.
+ * \param use_fast_connect Enable(1), disable(0). if enabled, tries to
+ * connect to the last connected AP.
+ * \param use_profiles Enable(1), disable(0) auto connect after reset.
+ * and periodically reconnect if needed.
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t ioctl_set_connection_policy(uint32_t should_connect_to_open_ap, uint32_t use_fast_connect, uint32_t use_profiles);
+ /**
+ * \brief Delete WLAN profile
+ * \param index Number of profile to delete
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t ioctl_del_profile(uint32_t index);
+ /**
+ * \brief Mask event according to bit mask. In case that event is
+ * masked (1), the device will not send the masked event to host.
+ * \param mask event mask
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t set_event_mask(uint32_t mask);
+ /**
+ * \brief Start to acquire device profile. The device acquire its own
+ * profile, if profile message is found.
+ * \param encrypted_flag Indicates whether the information is encrypted
+ * \return
+ * On success, zero is returned. On error, -1 is returned.
+ */
int32_t smart_config_start(uint32_t encrypted_flag);
+ /**
+ * \brief Stop the acquire profile procedure.
+ * \param none
+ * \return
+ * On success, zero is returned. On error, -1 is returned
+ */
int32_t smart_config_stop(void);
+ /**
+ * \brief Configure station ssid prefix.
+ * \param new_prefix 3 bytes identify the SSID prefix for the Smart Config.
+ * \return
+ * On success, zero is returned. On error, -1 is returned.
+ */
int32_t smart_config_set_prefix(uint8_t *new_prefix);
private:
cc3000_simple_link &_simple_link;
@@ -566,16 +1189,18 @@
*/
class cc3000 {
public:
+ /** status structure */
typedef struct {
- bool dhcp;
- bool connected;
+ bool dhcp;
+ bool connected;
uint8_t socket;
- bool smart_config_complete;
- bool stop_smart_config;
- bool dhcp_configured;
- bool ok_to_shut_down;
+ bool smart_config_complete;
+ bool stop_smart_config;
+ bool dhcp_configured;
+ bool ok_to_shut_down;
} tStatus;
- /** ctor for cc3000 class.
+ /**
+ * \brief Ctor.
* \param cc3000_irq IRQ pin
* \param cc3000_en Enable pin
* \param cc3000_cs Chip select pin
@@ -583,93 +1208,111 @@
* \param irq_port IRQ pin's port
*/
cc3000(PinName cc3000_irq, PinName cc3000_en, PinName cc3000_cs, SPI cc3000_spi, IRQn_Type irq_port);
- /** dtor
+ /**
+ * \brief Dtor.
*/
~cc3000();
- /** Initiate cc3000. It starts the wlan communication and deletes profiles.
+ /**
+ * \brief Initiate cc3000. It starts the wlan communication and deletes profiles.
* \param patch Patch
*/
void start(uint8_t patch);
- /** Stops the wlan communication.
+ /**
+ * \brief Stops the wlan communication.
*/
void stop();
- /** Restarts the wlan communication.
+ /**
+ * \brief Restarts the wlan communication.
*/
void restart(uint8_t patch);
- /** Disconnect wlan device
+ /**
+ * \brief Disconnect wlan device
*
*/
bool disconnect(void);
- /** Callback which is called from the event class. This updates status of cc3000.
+ /**
+ * \brief Callback which is called from the event class. This updates status of cc3000.
* \param event_type Type of the event
* \param data Pointer to data
* \param length Length of data
* \return none
*/
void usync_callback(int32_t event_type, uint8_t *data, uint8_t length);
- /** Connect to SSID (open/secured) with timeout (10ms).
+ /**
+ * \brief Connect to SSID (open/secured) with timeout (10ms).
* \param ssid SSID name
* \param key Security key (if key = 0, open connection)
* \param security_mode Security mode
* \return true if connection was established, false otherwise.
*/
bool connect_to_AP(const uint8_t *ssid, const uint8_t *key, int32_t security_mode);
- /** Connect to SSID which is secured
+ /**
+ * \brief Connect to SSID which is secured
* \param ssid SSID name
* \param key Security key
* \param security_mode Security mode
* \return true if connection was established, false otherwise.
*/
bool connect_secure(const uint8_t *ssid, const uint8_t *key, int32_t security_mode);
- /** Connect to SSID which is open (no security)
+ /**
+ * \brief Connect to SSID which is open (no security)
* \param ssid SSID name
* \return true if connection was established, false otherwise.
*/
bool connect_open(const uint8_t *ssid);
- /** Status of the cc3000 connection.
+ /**
+ * \brief Status of the cc3000 connection.
* \return true if it's connected, false otherwise.
*/
bool is_connected();
- /** Status of DHCP.
+ /**
+ * \brief Status of DHCP.
* \param none
* \return true if DCHP is configured, false otherwise.
*/
bool is_dhcp_configured();
- /** Status of smart confing completation.
+ /**
+ * \brief Status of smart confing completation.
* \param none
* \return smart config was set, false otherwise.
*/
bool is_smart_confing_completed();
- /** Return the cc3000's mac address.
+ /**
+ * \brief Return the cc3000's mac address.
* \param address Retreived mac address.
* \return
*/
uint8_t get_mac_address(uint8_t address[6]);
- /** Set the cc3000's mac address
- * \param address Mac address to be set
+ /**
+ * \brief Set the cc3000's mac address.
+ * \param address Mac address to be set.
* \return
*/
uint8_t set_mac_address(uint8_t address[6]);
- /** Get user file info
- * \param info_file Pointer where info will be stored
- * \param size Available size
+ /**
+ * \brief Get user file info.
+ * \param info_file Pointer where info will be stored.
+ * \param size Available size.
* \return none
*/
void get_user_file_info(uint8_t *info_file, size_t size);
- /** Set user filo info
- * \param info_file Pointer to user's info
+ /**
+ * \brief Set user filo info.
+ * \param info_file Pointer to user's info.
* \return none
*/
void set_user_file_info(uint8_t *info_file, size_t size);
- /** Start smart config
- * \param smart_config_key Pointer to smart config key
+ /**
+ * \brief Start smart config.
+ * \param smart_config_key Pointer to smart config key.
* \return none
*/
void start_smart_config(const uint8_t *smart_config_key); /* TODO enable AES ? */
#ifndef CC3000_TINY_DRIVER
- /** Return ip configuration
- * \param ip_config Pointer to ipconfig data
- * \return true if it's connected and info was retrieved, false otherwise.
+ /**
+ * \brief Return ip configuration.
+ * \param ip_config Pointer to ipconfig data.
+ * \return true if it's connected and info was retrieved, false otherwise.
*/
bool get_ip_config(tNetappIpconfigRetArgs *ip_config);
#endif
@@ -685,22 +1328,32 @@
* \return server with socket != -1
*/
cc3000_server create_tcp_server(uint32_t ip_address, uint16_t port);
- /** Creates udp client
+ /**
+ * \brief Creates udp client
* \param ip_address Server's IP address
* \param port Server's PORT
* \return client with socket != -1
*/
cc3000_client create_udp_client(uint32_t ip_address, uint16_t port);
- /** Delete all stored profiles
- * \param none
+ /**
+ * \brief Delete all stored profiles
+ * \param none
* \return none
*/
void delete_profiles(void);
/**
- *
+ * \brief Ping an ip address
+ * \param ip Destination IP address
+ * \param attempts Number of attempts
+ * \param timeout Time to wait for a response,in milliseconds.
+ * \param size Send buffer size which may be up to 1400 bytes
*/
uint32_t ping(uint32_t ip, uint8_t attempts, uint16_t timeout, uint8_t size);
-
+ /**
+ * \brief Returns cc3000 instance
+ * \param none
+ * \return Pointer to cc3000 object
+ */
static cc3000 *get_instance() {
return _inst;
}
@@ -725,35 +1378,35 @@
};
/**
-* Copy 32 bit to stream while converting to little endian format.
-* @param p pointer to the new stream
-* @param u32 pointer to the 32 bit
-* @return pointer to the new stream
-*/
+ * Copy 32 bit to stream while converting to little endian format.
+ * @param p pointer to the new stream
+ * @param u32 pointer to the 32 bit
+ * @return pointer to the new stream
+ */
uint8_t *UINT32_TO_STREAM_f (uint8_t *p, uint32_t u32);
/**
-* Copy 16 bit to stream while converting to little endian format.
-* @param p pointer to the new stream
-* @param u32 pointer to the 16 bit
-* @return pointer to the new stream
-*/
+ * Copy 16 bit to stream while converting to little endian format.
+ * @param p pointer to the new stream
+ * @param u32 pointer to the 16 bit
+ * @return pointer to the new stream
+ */
uint8_t *UINT16_TO_STREAM_f (uint8_t *p, uint16_t u16);
/**
-* Copy received stream to 16 bit in little endian format.
-* @param p pointer to the stream
-* @param offset offset in the stream
-* @return pointer to the new 16 bit
-*/
+ * Copy received stream to 16 bit in little endian format.
+ * @param p pointer to the stream
+ * @param offset offset in the stream
+ * @return pointer to the new 16 bit
+ */
uint16_t STREAM_TO_UINT16_f(uint8_t* p, uint16_t offset);
/**
-* Copy received stream to 32 bit in little endian format.
-* @param p pointer to the stream
-* @param offset offset in the stream
-* @return pointer to the new 32 bit
-*/
+ * Copy received stream to 32 bit in little endian format.
+ * @param p pointer to the stream
+ * @param offset offset in the stream
+ * @return pointer to the new 32 bit
+ */
uint32_t STREAM_TO_UINT32_f(uint8_t* p, uint16_t offset);
} /* end of mbed_cc3000 namespace */