![](/media/cache/profiles/3f4243a6f681f2920ac3e95a63517274.50x50_q85.jpg)
code that uses Watchdog to reset Mbed every 30seconds. After 30-60mins, the ethernet interface fails to setup() after WatchDog reset.
EthernetNetIf/LPC1768/lwip/include/netif/etharp.h
- Committer:
- eqon
- Date:
- 2012-06-07
- Revision:
- 0:0ce833f21e63
File content as of revision 0:0ce833f21e63:
/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * Copyright (c) 2003-2004 Leon Woestenberg <leon.woestenberg@axon.tv> * Copyright (c) 2003-2004 Axon Digital Design B.V., The Netherlands. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels <adam@sics.se> * */ #ifndef __NETIF_ETHARP_H__ #define __NETIF_ETHARP_H__ #include "lwip/opt.h" #if LWIP_ARP || LWIP_ETHERNET /* don't build if not configured for use in lwipopts.h */ #include "lwip/pbuf.h" #include "lwip/ip_addr.h" #include "lwip/netif.h" #include "lwip/ip.h" #ifdef __cplusplus extern "C" { #endif #ifndef ETHARP_HWADDR_LEN #define ETHARP_HWADDR_LEN 6 #endif #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/bpstruct.h" #endif PACK_STRUCT_BEGIN struct eth_addr { PACK_STRUCT_FIELD(u8_t addr[ETHARP_HWADDR_LEN]); } PACK_STRUCT_STRUCT; PACK_STRUCT_END #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/epstruct.h" #endif #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/bpstruct.h" #endif PACK_STRUCT_BEGIN /* Ethernet header */ struct eth_hdr { #if ETH_PAD_SIZE PACK_STRUCT_FIELD(u8_t padding[ETH_PAD_SIZE]); #endif PACK_STRUCT_FIELD(struct eth_addr dest); PACK_STRUCT_FIELD(struct eth_addr src); PACK_STRUCT_FIELD(u16_t type); } PACK_STRUCT_STRUCT; PACK_STRUCT_END #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/epstruct.h" #endif #define SIZEOF_ETH_HDR (14 + ETH_PAD_SIZE) #if ETHARP_SUPPORT_VLAN #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/bpstruct.h" #endif PACK_STRUCT_BEGIN /* VLAN header inserted between ethernet header and payload * if 'type' in ethernet header is ETHTYPE_VLAN. * See IEEE802.Q */ struct eth_vlan_hdr { PACK_STRUCT_FIELD(u16_t tpid); PACK_STRUCT_FIELD(u16_t prio_vid); } PACK_STRUCT_STRUCT; PACK_STRUCT_END #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/epstruct.h" #endif #define SIZEOF_VLAN_HDR 4 #define VLAN_ID(vlan_hdr) (htons((vlan_hdr)->prio_vid) & 0xFFF) #endif /* ETHARP_SUPPORT_VLAN */ #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/bpstruct.h" #endif PACK_STRUCT_BEGIN /* the ARP message, see RFC 826 ("Packet format") */ struct etharp_hdr { PACK_STRUCT_FIELD(u16_t hwtype); PACK_STRUCT_FIELD(u16_t proto); PACK_STRUCT_FIELD(u8_t hwlen); PACK_STRUCT_FIELD(u8_t protolen); PACK_STRUCT_FIELD(u16_t opcode); PACK_STRUCT_FIELD(struct eth_addr shwaddr); PACK_STRUCT_FIELD(struct ip_addr2 sipaddr); PACK_STRUCT_FIELD(struct eth_addr dhwaddr); PACK_STRUCT_FIELD(struct ip_addr2 dipaddr); } PACK_STRUCT_STRUCT; PACK_STRUCT_END #ifdef PACK_STRUCT_USE_INCLUDES # include "arch/epstruct.h" #endif #define SIZEOF_ETHARP_HDR 28 #define SIZEOF_ETHARP_PACKET (SIZEOF_ETH_HDR + SIZEOF_ETHARP_HDR) /* 5 seconds period */ #define ARP_TMR_INTERVAL 5000 #define ETHTYPE_ARP 0x0806 #define ETHTYPE_IP 0x0800 #define ETHTYPE_VLAN 0x8100 #define ETHTYPE_PPPOEDISC 0x8863 /* PPP Over Ethernet Discovery Stage */ #define ETHTYPE_PPPOE 0x8864 /* PPP Over Ethernet Session Stage */ /* MEMCPY-like macro to copy to/from struct eth_addr's that are local variables * or known to be 32-bit aligned within the protocol header. */ #ifndef ETHADDR32_COPY #define ETHADDR32_COPY(src, dst) SMEMCPY(src, dst, ETHARP_HWADDR_LEN) #endif /* MEMCPY-like macro to copy to/from struct eth_addr's that are no local * variables and known to be 16-bit aligned within the protocol header. */ #ifndef ETHADDR16_COPY #define ETHADDR16_COPY(src, dst) SMEMCPY(src, dst, ETHARP_HWADDR_LEN) #endif #if LWIP_ARP /* don't build if not configured for use in lwipopts.h */ /* ARP message types (opcodes) */ #define ARP_REQUEST 1 #define ARP_REPLY 2 /* Define this to 1 and define LWIP_ARP_FILTER_NETIF_FN(pbuf, netif, type) * to a filter function that returns the correct netif when using multiple * netifs on one hardware interface where the netif's low-level receive * routine cannot decide for the correct netif (e.g. when mapping multiple * IP addresses to one hardware interface). */ #ifndef LWIP_ARP_FILTER_NETIF #define LWIP_ARP_FILTER_NETIF 0 #endif #if ARP_QUEUEING /* struct for queueing outgoing packets for unknown address * defined here to be accessed by memp.h */ struct etharp_q_entry { struct etharp_q_entry *next; struct pbuf *p; }; #endif /* ARP_QUEUEING */ #define etharp_init() /* Compatibility define, not init needed. */ void etharp_tmr(void); s8_t etharp_find_addr(struct netif *netif, ip_addr_t *ipaddr, struct eth_addr **eth_ret, ip_addr_t **ip_ret); err_t etharp_output(struct netif *netif, struct pbuf *q, ip_addr_t *ipaddr); err_t etharp_query(struct netif *netif, ip_addr_t *ipaddr, struct pbuf *q); err_t etharp_request(struct netif *netif, ip_addr_t *ipaddr); /* For Ethernet network interfaces, we might want to send "gratuitous ARP"; * this is an ARP packet sent by a node in order to spontaneously cause other * nodes to update an entry in their ARP cache. * From RFC 3220 "IP Mobility Support for IPv4" section 4.6. */ #define etharp_gratuitous(netif) etharp_request((netif), &(netif)->ip_addr) #if ETHARP_SUPPORT_STATIC_ENTRIES err_t etharp_add_static_entry(ip_addr_t *ipaddr, struct eth_addr *ethaddr); err_t etharp_remove_static_entry(ip_addr_t *ipaddr); #endif /* ETHARP_SUPPORT_STATIC_ENTRIES */ #if LWIP_AUTOIP err_t etharp_raw(struct netif *netif, const struct eth_addr *ethsrc_addr, const struct eth_addr *ethdst_addr, const struct eth_addr *hwsrc_addr, const ip_addr_t *ipsrc_addr, const struct eth_addr *hwdst_addr, const ip_addr_t *ipdst_addr, const u16_t opcode); #endif /* LWIP_AUTOIP */ #endif /* LWIP_ARP */ err_t ethernet_input(struct pbuf *p, struct netif *netif); #define eth_addr_cmp(addr1, addr2) (memcmp((addr1)->addr, (addr2)->addr, ETHARP_HWADDR_LEN) == 0) extern const struct eth_addr ethbroadcast, ethzero; #ifdef __cplusplus } #endif #endif /* LWIP_ARP || LWIP_ETHERNET */ #endif /* __NETIF_ARP_H__ */