File content as of revision 0:4f174385050d:

Evaluation Boards/Products Supported
------------------------------------ 
EVAL-AD1234 (AD1234)
EVAL-AD1256 (AD1256)
<< add more here >>
 
Overview
--------
These code files provide drivers to interface with AD1234 and communicate with 
EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board 
https://os.mbed.com/platforms/SDP_K1/. 
 
Product details: https://www.analog.com/en/products/ad1234.html
Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html
 
 
Hardware Setup
--------------
Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external 
clock supply.
Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled 
controller board) using the SDP connector and screws.
Connect SDP-K1 board to the PC using the USB cable.
 
 
How to Get Started
------------------
Open Mbed online compiler. https://ide.mbed.com/compiler
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/
instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions 
here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
Open Tera Term (or alternative), select 9600 baud rate, and the applicable COM port to see the 
list of options.
 
A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
here: https://wiki.analog.com/resources/tools-software/mbed
 
 
Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.