EmbeddedArtists AB
Example showing the ublox Cellular GPS/GNSS module with the online PubNub service on an LPC4088 Experiment Base Board. This example uses an RTOS.
Dependencies: C027_Support EALib LM75B PubNub mbed-rtos mbed picojson
Revision 0:713518ea5028, committed 2014-10-01
- Comitter:
- embeddedartists
- Date:
- Wed Oct 01 11:39:10 2014 +0000
- Commit message:
- First version
Changed in this revision
diff -r 000000000000 -r 713518ea5028 C027_Support.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/C027_Support.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/teams/ublox/code/C027_Support/#f524fd9aa13d
diff -r 000000000000 -r 713518ea5028 EALib.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/EALib.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +https://mbed.org/users/embeddedartists/code/EALib/#b3a179cc3d88
diff -r 000000000000 -r 713518ea5028 LM75B.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/LM75B.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/neilt6/code/LM75B/#7ac462ba84ac
diff -r 000000000000 -r 713518ea5028 PubNub.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/PubNub.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/embeddedartists/code/PubNub/#55eb53c78b47
diff -r 000000000000 -r 713518ea5028 PubNubDemo.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PubNubDemo.cpp Wed Oct 01 11:39:10 2014 +0000
@@ -0,0 +1,313 @@
+#include <cstring>
+
+#include "mbed.h"
+#include "rtos.h"
+//#include "C12832.h"
+//#include "MMA7660.h"
+#include "MMA7455.h"
+#include "LM75B.h"
+
+#include "picojson.h"
+#include "PubNub.h"
+
+#include "sdram.h"
+
+//------------------------------------------------------------------------------------
+// You need to configure these cellular modem / SIM parameters.
+// These parameters are ignored for LISA-C200 variants and can be left NULL.
+//------------------------------------------------------------------------------------
+#include "MDM.h"
+//! Set your secret SIM pin here (e.g. "1234"). Check your SIM manual.
+#define SIMPIN NULL
+/*! The APN of your network operator SIM, sometimes it is "internet" check your
+ contract with the network operator. You can also try to look-up your settings in
+ google: https://www.google.de/search?q=APN+list */
+#define APN "online.telia.se"
+//! Set the user name for your APN, or NULL if not needed
+#define USERNAME NULL
+//! Set the password for your APN, or NULL if not needed
+#define PASSWORD NULL
+//------------------------------------------------------------------------------------
+
+/* Demo of PubNub + the mbed application board. */
+
+/* How to get things set up: */
+/* 1. Tune in at the PubNub Developer Console, with the following
+ * keys (press Subscribe afterwards): */
+const char pubkey[] = "demo";
+const char subkey[] = "demo";
+//const char channel[] = "mbed";
+const char channel_pub[] = "mbed_data";
+const char channel_sub[] = "mbed_cmd";
+/* 2. Attach your mbed board to your computer. A folder should pop up like
+ * if you plug in a USB memory stick. */
+/* 3. Open this example in the mbed web IDE and hit the Compile button. */
+/* 4. A download popup with a .bin file will appear; save it in the USB
+ * mbed folder. */
+/* 5. Press reset button on the mbed to start things up. */
+
+/* You will see the board publish a "status" message that shows its
+ * current temperature and physical tilt. The board's LCD should
+ * print some progress messages regarding that. */
+/* You can make the board do things too, by sending messages like:
+ * { "send_status": true }
+ * { "lcd": "Hi there!" }
+ * { "beep": true }
+ * { "led": {"r": 0.5, "g": 1, "b": 0} }
+ * Try it out! Paste these in the Message window and press the send icon.
+ */
+
+Serial pc(USBTX, USBRX); // tx, rx
+//MMA7660 MMA(P0_27, P0_28);
+MMA7455 MMA(P0_27, P0_28);
+LM75B tmp(P0_27, P0_28, LM75B::ADDRESS_1);
+//C12832 lcd(D11, D13, D12, D7, D10);
+
+PwmOut led_r(p25); // RGB LED with 3 PWM outputs for dimmer control
+PwmOut led_g(p28);
+PwmOut led_b(p26);
+//PwmOut speaker(D6); // Speaker with PWM driver
+
+DigitalOut led1(LED1);
+DigitalOut led2(LED2);
+DigitalOut led3(LED3);
+DigitalOut led4(LED4);
+
+
+bool forceStatusUpdate = true;
+
+Mutex stdio_mutex;
+
+#define safe_printf(...) do { \
+ stdio_mutex.lock(); \
+ pc.printf(__VA_ARGS__); \
+ stdio_mutex.unlock(); \
+ } while(0)
+
+#define safe_print_pnub_err(__prefix) do { \
+ stdio_mutex.lock(); \
+ if (pnub_err) { \
+ pc.printf("%s: ERR, code = %d, line = %d\n", (__prefix), pnub_code, pnub_line); \
+ pnub_err = false; \
+ } \
+ stdio_mutex.unlock(); \
+ } while(0)
+
+void pnub_err_handler(PubNubRes code, int line) {
+ stdio_mutex.lock();
+ if (code != PNR_OK) {
+ pc.printf("PbuNub:%d ERROR %d\n", line, code);
+ }
+ stdio_mutex.unlock();
+}
+
+void process_msg(PubNub &pn, const char *jsonmsg)
+{
+ /* Use the picojson parser since we want to deal with complex messages.
+ * If you are short on memory, you can find an example for parsing simple
+ * JSON messages in the PubNub::subscribe() API docs. */
+ picojson::value msg;
+ std::string err = picojson::parse(msg, jsonmsg, jsonmsg + strlen(jsonmsg));
+ do {
+ if (!err.empty()) {
+ safe_printf("JSON parse: %s \n", err.c_str());
+ break;
+ }
+
+ if (msg.get("send_status").get<bool>()) {
+ //status_msg(pn);
+ forceStatusUpdate = true;
+ safe_printf("force_update\n");
+ break;
+ }
+ if (msg.get("lcd").is<std::string>()) {
+ safe_printf("in: %s \n", msg.get("lcd").get<std::string>().c_str());
+ break;
+ }
+ if (msg.get("beep").is<bool>()) {
+ //speaker = msg.get("beep").get<bool>() ? 0.5 : 0;
+ break;
+ }
+ if (msg.get("led").is<picojson::object>()) {
+ picojson::value led = msg.get("led");
+ safe_printf("Old RGB { %.3f, %.3f, %.3f }\n", led_r.read(), led_g.read(), led_b.read());
+ if (led.get("r").is<double>()) led_r = 1.0 - led.get("r").get<double>();
+ if (led.get("g").is<double>()) led_g = 1.0 - led.get("g").get<double>();
+ if (led.get("b").is<double>()) led_b = 1.0 - led.get("b").get<double>();
+ safe_printf("New RGB { %.3f, %.3f, %.3f }\n", led_r.read(), led_g.read(), led_b.read());
+ break;
+ }
+ } while(0);
+}
+
+void publish_thread(void const *args)
+{
+ PubNub pn(pubkey, subkey);
+ Timer t;
+ t.start();
+ Timer tDbg;
+ int nDbg = 0;
+ float lastTemp = -3.75f;
+ while (true) {
+
+ /* Read sensors. */
+ int m[3];
+ MMA.read(m[0], m[1], m[2]);
+ float temp = (float)tmp;
+
+ /* Print on LCD. */
+ safe_printf("cur: mx=%3d, my=%3d, mz=%3d, t=%.2f \n", m[0], m[1], m[2], temp);
+
+ if (forceStatusUpdate || (temp != lastTemp)) {
+ lastTemp = temp;
+ forceStatusUpdate = false;
+
+ /* Prepare JSON message. */
+ char jsonmsg[128];
+// snprintf(jsonmsg, sizeof(jsonmsg),
+// "{\"status\":{\"mx\":%3d,\"my\":%3d,\"mz\":%3d,\"temp\":%.2f}}",
+// m[0], m[1], m[2], temp);
+ snprintf(jsonmsg, sizeof(jsonmsg),
+ "%%7B%%22status%%22:%%7B%%22mx%%22:%3d,%%22my%%22:%3d,%%22mz%%22:%3d,%%22temp%%22:%.2f%%7D%%7D",
+ m[0], m[1], m[2], temp);
+
+ /* Publish on PubNub. */
+ safe_printf("before publishing\n");
+ led_r = 0;
+ tDbg.start();
+// PubNubRes ret = pn.publish(channel_pub, jsonmsg);
+ PubNubRes ret = pn.publish_urlenc(channel_pub, jsonmsg);
+ tDbg.stop();
+ if (++nDbg == 10) {
+ safe_printf("10 requests took %d ms, i.e %d ms/req\n", tDbg.read_ms(), tDbg.read_ms()/10);
+ tDbg.reset();
+ nDbg = 0;
+ }
+
+ if (ret != PNR_OK) {
+ safe_printf("puberr: %d \n", ret);
+ //safe_print_pnub_err("pub");
+ forceStatusUpdate = true; // so that we can try again
+ }
+ led_r = 1;
+ safe_printf("after publishing\n");
+ }
+
+ wait_ms(100);
+ }
+}
+
+void subscribe_thread(void const *args)
+{
+ PubNub pn(pubkey, subkey);
+ while(true) {
+ char *reply = NULL;
+ PubNubRes ret = pn.subscribe(channel_sub, &reply);
+ if (ret != PNR_OK) {
+ safe_printf("suberr: %d \n", ret);
+ //safe_print_pnub_err("sub");
+ wait(1.0);
+ continue;
+ }
+
+ if (reply) {
+ safe_printf("recv(%s)\n", reply);
+ process_msg(pn, reply);
+ }
+
+ wait(0.5); // avoid busy loop in bad situations
+ }
+}
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void)
+{
+ led1 = led2 = 1; led3 = led4 = 0; // lights out
+ while(1) {
+ led1 = 1;
+ led3 = 1;
+ wait_ms(100);
+ led2 = 1;
+ led1 = 0;
+ wait_ms(100);
+ led4 = 0;
+ led2 = 0;
+ wait_ms(100);
+ led3 = 0;
+ led4 = 1;
+ wait_ms(100);
+ }
+}
+
+int main()
+{
+ if (sdram_init()) {
+ pc.printf("Failed to initialize SDRAM\n");
+ }
+
+ /* For debugging, you may find it useful to print memory usage
+ * stats. AvailableMemory may be flaky, but the following is nice.
+ * It will get printed to the USB serial port interface. */
+ //printf("%d: ", __LINE__); __heapstats((__heapprt)fprintf, stdout);
+
+ /* Generate a 800Hz tone using PWM hardware output */
+ //speaker.period(1.0/800.0); // 800hz period
+ led_r = led_g = led_b = 1.0; // lights out
+ led1 = led2 = 1; led3 = led4 = 0; // lights out
+
+ //lcd.cls();
+ //lcd.locate(0,0);
+
+ if (!tmp.open()) {
+ pc.printf("Failed to open LM75 temperature sensor\n");
+ }
+
+// if (!MMA.testConnection())
+// pc.printf("MMA error \n");
+
+ // Initialize the accelerometer
+ if (!MMA.setMode(MMA7455::ModeMeasurement)) {
+ printf("Unable to set mode for MMA7455!\n");
+ }
+
+ // Calibrate it. It does not matter if it is on a level surface
+ // as this test is only interested in relative values.
+ if (!MMA.calibrate()) {
+ printf("Failed to calibrate MMA7455!\n");
+ }
+
+ MDMRtos<MDMSerial> mdm;
+ //mdm.setDebug(4); // enable this for debugging issues
+ int i;
+ for (i = 1; i <= 10; i++) {
+ if (mdm.connect(SIMPIN, APN,USERNAME,PASSWORD)) {
+ printf("Connected\n");
+ mdm.setDebug(0); // disable debug again
+ break;
+ } else {
+ printf("Attempt %2d to connect to the modem FAILED.\n", i);
+ wait(1);
+ mdm.setDebug(min(i, 4)); // to add more and more debug output
+ }
+ }
+ if (i > 10) {
+ printf("Failed to connect to the modem\n");
+ mbed_die();
+ }
+
+ forceStatusUpdate = true;
+ //status_msg(pn);
+ // lcd.printf("pub... ");
+
+ Thread t_p(publish_thread);
+ Thread t_s(subscribe_thread);
+
+ while (1) {
+ Thread::wait(2000);
+ safe_printf(".\n");
+ }
+
+ mdm.disconnect();
+ mdm.powerOff();
+}
diff -r 000000000000 -r 713518ea5028 mbed-rtos.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-rtos.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed-rtos/#631c0f1008c3
diff -r 000000000000 -r 713518ea5028 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/552587b429a1 \ No newline at end of file
diff -r 000000000000 -r 713518ea5028 picojson.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/picojson.lib Wed Oct 01 11:39:10 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mimil/code/picojson/#2bb500b021e2
diff -r 000000000000 -r 713518ea5028 pubnub_acc.html
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pubnub_acc.html Wed Oct 01 11:39:10 2014 +0000
@@ -0,0 +1,186 @@
+<html>
+ <head>
+<!-- <script type="text/javascript" src="jscolor/jscolor.js"></script>-->
+ <script type="text/javascript" src="https://www.google.com/jsapi"></script>
+ <script type="text/javascript">
+ var baseline = Math.round(new Date().getTime()/10); // current time as integer in 10ms resolution
+ var temps = [['Time', 'Temp']];
+ var accs = [['Time', 'X', 'Y', 'Z']];
+ google.load("visualization", "1", {packages:["corechart"]});
+ //google.setOnLoadCallback(drawChart);
+ function drawChart() {
+ /*var data = google.visualization.arrayToDataTable([
+ ['Year', 'Sales', 'Expenses'],
+ ['2004', 1000, 400],
+ ['2005', 1170, 460],
+ ['2006', 660, 1120],
+ ['2007', 1030, 540]
+ ]);*/
+ var data = google.visualization.arrayToDataTable(temps);
+
+ var options = {
+ title: 'Temperature over time',
+ vAxis: { title: "Degrees C" },
+ hAxis: { title: "Time since first message (in seconds)" },
+ curveType: 'function',
+ legend: { position: 'none' },
+ };
+
+ var chart = new google.visualization.LineChart(document.getElementById('chart_div'));
+
+ chart.draw(data, options);
+
+ // Acc chart
+ var data = google.visualization.arrayToDataTable(accs);
+
+ var options = {
+ title: 'Acceleration over time',
+ vAxis: { title: "Acc value", minValue: -60, maxValue: 60 },
+ hAxis: { title: "Time since first message (in seconds)" },
+ curveType: 'function',
+ //legend: { position: 'none' },
+ };
+
+ var chart = new google.visualization.LineChart(document.getElementById('acc_chart_div'));
+
+ chart.draw(data, options);
+ }
+ function addToChart(t, x, y, z) {
+ var now = Math.round(new Date().getTime()/10); // current time as integer in 10ms resolution
+ console.log(new Date().getTime()/10 + " " + (now - baseline) + " temp = " + t+ " acc {"+x+","+y+","+z+"}");
+ temps[temps.length] = [ (now - baseline)/100, t ];
+ accs[accs.length] = [ (now - baseline)/100, x, y, z];
+ drawChart();
+ }
+ </script>
+ <script src=http://cdn.pubnub.com/pubnub.min.js ></script>
+ <script>
+ var pubnub = PUBNUB.init({
+ publish_key: 'pub-c-e4a8b6d6-7be2-4ef9-85b9-f6dfbed23f7d',
+ subscribe_key: 'sub-c-83ad9d3a-3365-11e4-9846-02ee2ddab7fe'
+ });
+
+ function receiveMessage(message) {
+ //console.log(message);
+
+ var type = 0;
+ try {
+ var test = message.status.mx;
+ type = 1;
+ } catch (err) {
+ // not a measurement status message from HW
+ }
+ try {
+ var test = message.led.r;
+ type = 2;
+ } catch (err) {
+ // not a set RGB color request from us
+ }
+
+ var messageLog = document.getElementById("messageLog");
+ if (type == 1) {
+ var listItem = document.createElement("li");
+ var msg = "Acc X,Y,Z = {" + message.status.mx + ", " + message.status.my + ", " + message.status.mz + "} Temp = " + message.status.temp;
+ var text = document.createTextNode(msg);
+ listItem.appendChild(text);
+ document.getElementById("messageList").appendChild(listItem);
+ messageLog.scrollTop = messageLog.scrollHeight;
+ addToChart(message.status.temp, message.status.mx, message.status.my, message.status.mz);
+ } else if (type == 2) {
+ var listItem = document.createElement("li");
+ var msg = "Set RGB LED: {" + message.led.r + ", " + message.led.g + ", " + message.led.b + "}";
+ var text = document.createTextNode(msg);
+ listItem.appendChild(text);
+ document.getElementById("messageList").appendChild(listItem);
+ messageLog.scrollTop = messageLog.scrollHeight;
+ //addToChart(message.status.temp);
+ } else {
+ // got an error, probably because message is not from mbed
+ var listItem = document.createElement("li");
+ var msg = "Unknwon RAW message: " + message;
+ var text = document.createTextNode(msg);
+ listItem.appendChild(text);
+ document.getElementById("messageList").appendChild(listItem);
+ messageLog.scrollTop = messageLog.scrollHeight;
+ //addToChart(message.status.temp);
+ }
+ }
+
+ /*function sendMessage(newcolor) {
+ //var r = parseInt(newcolor.substr(0,2), 16)/255;
+ //var g = parseInt(newcolor.substr(2,2), 16)/255;
+ //var b = parseInt(newcolor.substr(4,2), 16)/255;
+ //var msg = '{ "led": {"r": ' + r + ', "g": ' + g + ', "b": ' + b + '} }';
+ //var msg = '{ "led": {"r": ' + newcolor.rgb[0] + ', "g": ' + newcolor.rgb[1] + ', "b": ' + newcolor.rgb[2] + '} }';
+ var msg = { "led": {"r": newcolor.rgb[0], "g": newcolor.rgb[1], "b": newcolor.rgb[2]} };
+ console.log("new color #" + newcolor + " => message " + msg.led.r+","+msg.led.g+","+msg.led.b);
+ pubnub.publish({
+ channel: 'mbed_cmd',//'hello_world',
+ message: msg
+ });
+ }*/
+ function sendColorMessage(r,g,b) {
+ var msg = { "led": {"r": r, "g": g, "b": b} };
+ console.log("message " + msg.led.r+","+msg.led.g+","+msg.led.b);
+ pubnub.publish({
+ channel: 'mbed_cmd',//'hello_world',
+ message: msg
+ });
+ }
+
+ pubnub.subscribe({
+ channel: 'mbed_data',//'hello_world',
+ message: receiveMessage
+ });
+
+/* pubnub.unsubscribe({
+ channel: 'a',
+ message: function(m){console.log(m)}
+ });*/
+ </script>
+ <style>
+ li { font-style: monospace; }
+ table,tr {border: none; }
+ </style>
+ </head>
+ <body>
+ <!--<img src="http://www.pubnub.com/static/images/illustrations/cloud-red.png">-->
+
+ <table>
+ <tr>
+ <td valign="top">
+ <table>
+ <tr valign="top">
+ <td><div id="chart_div" style="width: 800px; height: 400px;"></div></td>
+ </tr>
+ <tr valign="top">
+ <td><div id="acc_chart_div" style="width: 800px; height: 400px;"></div></td>
+ </tr>
+ <!--<tr valign="top">
+ <td>Change color on RGB LED to: <input class="color" onchange="sendMessage(this.color)"></td>
+ </tr>-->
+ <tr valign="top">
+ <td>
+ <input type="button" value="Set color to RED" onclick="sendColorMessage(1,0,0)">
+ <input type="button" value="Set color to GREEN" onclick="sendColorMessage(0,1,0)">
+ <input type="button" value="Set color to BLUE" onclick="sendColorMessage(0,0,1)">
+ </td>
+ </tr>
+ </table>
+ </td>
+ <td>
+ <p><b>Data from mbed:</b></p>
+ <div id="messageLog" style="height: 600px; width: 350px; overflow:auto;">
+ <ol id="messageList">
+ <!-- This will be populated dynamically. -->
+ </ol>
+ </div>
+ </td>
+ </tr>
+ <tr>
+ <td>
+ <!--<input class="color" onchange="sendMessage(this.color)">-->
+ </td>
+ </tr>
+ </body>
+</html>
\ No newline at end of file