File content as of revision 0:9297e33f50cf:

/**
* \file
*
* \brief The definition of EPD GPIO pins
*
* Copyright (c) 2012-2014 Pervasive Displays Inc. All rights reserved.
*
*  Authors: Pervasive Displays Inc.
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*  1. Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*  2. Redistributions in binary form must reproduce the above copyright
*     notice, this list of conditions and the following disclaimer in
*     the documentation and/or other materials provided with the
*     distribution.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#include "Pervasive_Displays_small_EPD.h"

#ifndef DISPLAY_HARDWARE_GPIO_H_INCLUDED
#define DISPLAY_HARDWARE_GPIO_H_INCLUDED

#define	_BV(bit)   (1 << (bit)) /**< left shift 1 bit */
#define	_HIGH      1            /**< signal high */
#define	_LOW       !_HIGH       /**< signal low */

////FOR MSP430
//#define DIR_(x) 			    x ## DIR
//#define DIR(x)				    (DIR_(x))
//#define OUT_(x) 			    x ## OUT
//#define OUTPORT(x) 			    (OUT_(x))
//#define SEL_(x)				    x ## SEL
//#define SEL(x)				    (SEL_(x))
//#define SEL2_(x)			    x ## SEL2
//#define SEL2(x)				    (SEL2_(x))
//#define IN_(x) 				    x ## IN
//#define INPORT(x) 			    (IN_(x))
//#define REN_(x) 			    x ## REN
//#define REN(x) 				    (REN_(x))
//#define BITSET(x,y) 		    ((x) |= (y))
//#define BITCLR(x,y) 		    ((x) &= ~(y))
//#define BITINV(x,y) 		    ((x) ^= (y))

//#define	config_gpio_dir_o(Port,Pin)  BITSET(DIR (Port), Pin) /**< set output direction for an IOPORT pin */
//#define	config_gpio_dir_i(Port,Pin)  BITCLR(DIR (Port), Pin)  /**< set input direction for an IOPORT pin */
//#define	set_gpio_high(Port,Pin)      BITSET (OUTPORT (Port), Pin) /**< set HIGH for an IOPORT pin */
//#define	set_gpio_low(Port,Pin)       BITCLR (OUTPORT (Port), Pin)  /**< set LOW for an IOPORT pin */
//#define	set_gpio_invert(Port,Pin)    BITINV(OUTPORT (Port),Pin) /**< toggle the value of an IOPORT pin */
//#define	input_get(Port,Pin)          (INPORT (Port)  & Pin )   /**< get current value of an IOPORT pin */

/******************************************************************************
* GPIO Defines
*****************************************************************************/
//#define Temper_PIN              BIT4
//#define Temper_PORT             P1       /**< LaunchPad P1.4 */
//#define SPICLK_PIN              BIT5
//#define SPICLK_PORT             P1       /**< LaunchPad P1.5 */
//#define EPD_BUSY_PIN            BIT0
//#define EPD_BUSY_PORT           P2       /**< LaunchPad P2.0  */
//#define PWM_PIN                 BIT1
//#define PWM_PORT                P2       /**< LaunchPad P2.1  */
//#define EPD_RST_PIN             BIT2
//#define EPD_RST_PORT            P2       /**< LaunchPad P2.2 */
//#define EPD_PANELON_PIN         BIT3
//#define EPD_PANELON_PORT        P2       /**< LaunchPad P2.3  */
//#define EPD_DISCHARGE_PIN       BIT4
//#define EPD_DISCHARGE_PORT      P2       /**< LaunchPad P2.4  */
//#define EPD_BORDER_PIN          BIT5
//#define EPD_BORDER_PORT         P2       /**< LaunchPad P2.5  */
//#define SPIMISO_PIN             BIT6
//#define SPIMISO_PORT            P1       /**< LaunchPad P1.6  */
//#define SPIMOSI_PIN             BIT7
//#define SPIMOSI_PORT            P1       /**< LaunchPad P1.7  */
//#define Flash_CS_PIN            BIT7
//#define Flash_CS_PORT           P2       /**< LaunchPad P2.7  */
//#define	Flash_CS_PORT_SEL	    (SEL (Flash_CS_PORT))
//#define	Flash_CS_PORT_SEL2		(SEL2(Flash_CS_PORT))
//#define EPD_CS_PIN              BIT6
//#define EPD_CS_PORT             P2       /**< LaunchPad P2.6  */
//#define	CS_PORT_SEL		        (SEL (EPD_CS_PORT))
//#define	CS_PORT_SEL2		    (SEL2(EPD_CS_PORT))

bool EPD_IsBusy(void);
void EPD_cs_high (void);
void EPD_cs_low (void);
void EPD_flash_cs_high(void);
void EPD_flash_cs_low (void);
void EPD_rst_high (void);
void EPD_rst_low (void);
void EPD_discharge_high (void);
void EPD_discharge_low (void);
void EPD_Vcc_turn_off (void);
void EPD_Vcc_turn_on (void);
void EPD_border_high(void);
void EPD_border_low (void);
void EPD_pwm_low (void);
void EPD_pwm_high(void);
void SPIMISO_low(void);
void SPIMOSI_low(void);
void SPICLK_low(void);
void EPD_initialize_gpio(void);

#endif	//DISPLAY_HARDWARE_GPIO_H_INCLUDED