Diff: config_me.h

Revision:

41:85a736a9b900

Parent:

38:532a0d929756

Child:

42:8500f0cb2ea5

diff -r 45e4636d20cc -r 85a736a9b900 config_me.h
--- a/config_me.h	Thu Sep 29 14:19:53 2016 +0000
+++ b/config_me.h	Tue Oct 04 20:29:31 2016 +0000
@@ -6,12 +6,13 @@
 // This is the server's base URL name.  Example "www.google.com"
 // Note that when you Fork a FLOW, it will typically assign  either
 // "run-east.att.io" or "run-west.att.io", so be sure to check this.
-static const char * MY_SERVER_URL       = "run-east.att.io";
-
+//static const char * MY_SERVER_URL       = "run-east.att.io";
+static const char * MY_SERVER_URL       = "108.244.165.22";
 // These are FLOW fields from the Endpoints tab:
-#define FLOW_BASE_URL                   "/a80556051c438/f4cd2ed65f73/7ecb40fcd115f7a/in/flow"
+//#define FLOW_BASE_URL                   "/a80556051c438/f4cd2ed65f73/7ecb40fcd115f7a/in/flow"
+//#define FLOW_INPUT_NAME                 "/shelf"
+#define FLOW_BASE_URL                   ""
 #define FLOW_INPUT_NAME                 "/shelf"
-
 // Unless you want to use a different protocol, this field should be left as is:
 #define FLOW_URL_TYPE                   " HTTP/1.1\r\nHost: "
 
@@ -33,12 +34,13 @@
 #define TEMP_HUMIDITY_ACCELEROMETER             2
 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 3
 #define PROXIMITY_ONLY 4
+#define SWITCH_ONLY 5
 static int iSensorsToReport = PROXIMITY_ONLY; //TEMP_HUMIDITY_ONLY; //modify this to change your selection
 
 // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit:
 static const char * MY_APN_STR          = "m2m.com.attz";
 
 //This is for normal HTTP.  If you want to use TCP to a specific port, change that here:
-static const char * MY_PORT_STR         = "80";
+static const char * MY_PORT_STR         = "5005";
 
 #endif