Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_flash.h

Revision:

93:e188a91d3eaa

diff -r 4fc01daae5a5 -r e188a91d3eaa TARGET_NUCLEO_F303RE/stm32f3xx_hal_flash.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_flash.h	Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,532 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_flash.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    12-Sept-2014
+  * @brief   Header file of Flash HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_H
+#define __STM32F3xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH FLASH HAL module driver
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */  
+
+/** 
+  * @brief FLASH Error source  
+  */ 
+typedef enum
+{ 
+  FLASH_ERROR_PG        = 0x01,
+  FLASH_ERROR_WRP       = 0x02
+} FLASH_ErrorTypeDef;
+
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
+                             This parameter can be a value of @ref FLASH_Type_Erase */
+
+  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+                             This parameter must be a value of @ref FLASHEx_Address */
+  
+  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
+                             This parameter must be a value between 1 and (max number of pages - value of initial page)*/           
+                                                          
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Options bytes program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
+                             This parameter can be a value of @ref FLASH_OB_Type */
+
+  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
+                             This parameter can be a value of @ref FLASH_OB_WRP_State */
+
+  uint32_t WRPPage;     /*!< WRPSector: specifies the page(s) to be write protected
+                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
+                             This parameter can be a value of @ref FLASH_OB_Read_Protection */
+
+  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
+                             IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
+                             This parameter can be a combination of @ref FLASH_OB_IWatchdog, @ref FLASH_OB_nRST_STOP, 
+                             @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring,
+                             @ref FLASH_OB_SRAM_Parity_Enable and @ref FLASH_OB_SDADC12_VDD_MONITOR */
+
+  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
+                             This parameter can be a value of @ref FLASH_OB_Data_Address */
+  
+  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
+                             This parameter can have any value */
+  
+} FLASH_OBProgramInitTypeDef;
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE              = 0, 
+  FLASH_PROC_PAGEERASE         = 1,
+  FLASH_PROC_MASSERASE         = 2,
+  FLASH_PROC_PROGRAMHALFWORD   = 3,
+  FLASH_PROC_PROGRAMWORD       = 4,
+  FLASH_PROC_PROGRAMDOUBLEWORD = 5
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+  
+  __IO uint32_t               DataRemaining;    /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+  
+  __IO uint32_t               Address;          /* Internal variable to save address selected for program or erase */
+  
+  __IO uint64_t               Data;             /* Internal variable to save data to be programmed */
+
+  HAL_LockTypeDef             Lock;             /* FLASH locking object                */
+
+  __IO FLASH_ErrorTypeDef     ErrorCode;        /* FLASH error code                    */
+
+} FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASH_Type_Erase FLASH Type Erase
+  * @{
+  */ 
+#define TYPEERASE_PAGES     ((uint32_t)0x00)  /*!<Pages erase only*/
+#define TYPEERASE_MASSERASE ((uint32_t)0x01)  /*!<Flash mass erase activation*/
+
+#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
+                             ((VALUE) == TYPEERASE_MASSERASE))  
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define TYPEPROGRAM_HALFWORD   ((uint32_t)0x01)  /*!<Program a half-word (16-bit) at a specified address.*/
+#define TYPEPROGRAM_WORD       ((uint32_t)0x02)  /*!<Program a word (32-bit) at a specified address.*/
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03)  /*!<Program a double word (64-bit) at a specified address*/
+
+#define IS_TYPEPROGRAM(VALUE)  (((VALUE) == TYPEPROGRAM_HALFWORD) || \
+                                ((VALUE) == TYPEPROGRAM_WORD)     || \
+                                ((VALUE) == TYPEPROGRAM_DOUBLEWORD))  
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_OB_WRP_State FLASH WRP State
+  * @{
+  */ 
+#define WRPSTATE_DISABLE   ((uint32_t)0x00)  /*!<Disable the write protection of the desired pages*/
+#define WRPSTATE_ENABLE    ((uint32_t)0x01)  /*!<Enable the write protection of the desired pagess*/
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
+                            ((VALUE) == WRPSTATE_ENABLE))  
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+  * @{
+  */
+#define OPTIONBYTE_WRP       ((uint32_t)0x01)  /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP       ((uint32_t)0x02)  /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER      ((uint32_t)0x04)  /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA      ((uint32_t)0x08)  /*!<DATA option byte configuration*/
+
+#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */ 
+#define FLASH_LATENCY_0            ((uint8_t)0x0000)    /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1            FLASH_ACR_LATENCY_0  /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2            FLASH_ACR_LATENCY_1  /*!< FLASH Two Latency cycles */
+
+#define IS_FLASH_LATENCY(LATENCY)  (((LATENCY) == FLASH_LATENCY_0) || \
+                                    ((LATENCY) == FLASH_LATENCY_1) || \
+                                    ((LATENCY) == FLASH_LATENCY_2))
+/**
+  * @}
+  */ 
+  
+/** @defgroup FLASH_OB_Data_Address  FLASH Option Byte Data Address
+  * @{
+  */  
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) 
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_OB_Read_Protection FLASH Option Byte Read Protection
+  * @{
+  */
+#define OB_RDP_LEVEL_0             ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1             ((uint8_t)0xBB)
+#define OB_RDP_LEVEL_2             ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 
+                                                      it's no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL)     (((LEVEL) == OB_RDP_LEVEL_0)   ||\
+                                    ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+                                    ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+  * @}
+  */ 
+  
+/** @defgroup FLASH_OB_IWatchdog FLASH Option Byte IWatchdog
+  * @{
+  */ 
+#define OB_IWDG_SW                 ((uint8_t)0x01)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                 ((uint8_t)0x00)  /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE)  (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+/**
+  * @}
+  */ 
+  
+/** @defgroup FLASH_OB_nRST_STOP FLASH Option Byte nRST STOP
+  * @{
+  */ 
+#define OB_STOP_NO_RST             ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST                ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE)  (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_OB_nRST_STDBY FLASH Option Byte nRST STDBY
+  * @{
+  */ 
+#define OB_STDBY_NO_RST            ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST               ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+  * @}
+  */    
+
+/** @defgroup FLASH_OB_BOOT1 FLASH Option Byte BOOT1
+  * @{
+  */
+#define OB_BOOT1_RESET             ((uint8_t)0x00) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET               ((uint8_t)0x10) /*!< BOOT1 Set */
+#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+/**
+  * @}
+  */  
+
+/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH Option Byte VDDA Analog Monitoring
+  * @{
+  */
+#define OB_VDDA_ANALOG_ON          ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF         ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
+#define IS_OB_VDDA_ANALOG(ANALOG)  (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_OB_SRAM_Parity_Enable FLASH Option Byte SRAM Parity Enable
+  * @{
+  */
+#define OB_SRAM_PARITY_SET         ((uint8_t)0x00) /*!< SRAM parity enable set */
+#define OB_SRAM_PARITY_RESET       ((uint8_t)0x40) /*!< SRAM parity enable reset */
+#define IS_OB_SRAM_PARITY(PARITY)  (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_OB_SDADC12_VDD_MONITOR FLASH Option Byte SDADC12 VDD MONITOR
+  * @{
+  */
+#define OB_SDADC12_VDD_MONITOR_SET        ((uint8_t)0x80) /*!< SDADC12_VDD power supply supervisor set */
+#define OB_SDADC12_VDD_MONITOR_RESET      ((uint8_t)0x00) /*!< SDADC12_VDD power supply supervisor reset */
+#define IS_OB_SDADC12_VDD_MONITOR(MONITOR)  (((MONITOR) == OB_SDADC12_VDD_MONITOR_SET) || ((MONITOR) == OB_SDADC12_VDD_MONITOR_RESET))
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */ 
+#define FLASH_FLAG_BSY             FLASH_SR_BSY            /*!< FLASH Busy flag                           */ 
+#define FLASH_FLAG_PGERR           FLASH_SR_PGERR          /*!< FLASH Programming error flag    */
+#define FLASH_FLAG_WRPERR          FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
+#define FLASH_FLAG_EOP             FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG)  ((((FLAG) & (uint32_t)0xFFFFFFC3) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG)    (((FLAG) == FLASH_FLAG_BSY)    || ((FLAG) == FLASH_FLAG_PGERR)  || \
+                                    ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_EOP))
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */ 
+#define FLASH_IT_EOP               FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR               FLASH_CR_ERRIE  /*!< Error Interrupt source */
+#define IS_FLASH_IT(IT)            ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+  * @}
+  */  
+
+/** @defgroup FLASH_Timeout_definition FLASH Timeout definition
+  * @brief FLASH Timeout definition
+  * @{
+  */ 
+#define HAL_FLASH_TIMEOUT_VALUE   ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */  
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ *  @brief macros to control FLASH features 
+ *  @{
+ */
+ 
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__: FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  * @retval None
+  */ 
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__)    (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval None
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()    (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval None
+  */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+  * @brief  Enable the FLASH half cycle access.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE()  (FLASH->ACR |= FLASH_ACR_HLFCYA)
+
+/**
+  * @brief  Disable the FLASH half cycle access.
+  * @retval None
+  */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/** @defgroup FLASH_Interrupt FLASH Interrupt
+ *  @brief macros to handle FLASH interrupts
+ * @{
+ */ 
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)          ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag 
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)        (FLASH->SR = (__FLAG__))
+
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */ 
+
+/* Include FLASH HAL Extended module */
+#include "stm32f3xx_hal_flash_ex.h"  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+  
+/** @addtogroup FLASH_Exported_Functions_Group1 Input and Output operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler method */
+void              HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void       HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void       HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3 Peripheral State functions 
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Private_Functions FLASH Exported Private Functions
+ * @{
+ */
+/* Erase operations */
+void                    FLASH_PageErase(uint32_t PageAddress);
+HAL_StatusTypeDef       FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/* Program operations */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/