Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
Diff: TARGET_DISCO_L053C8/stm32l0xx_hal.h
- Revision:
- 99:dbbf35b96557
diff -r 8ab26030e058 -r dbbf35b96557 TARGET_DISCO_L053C8/stm32l0xx_hal.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DISCO_L053C8/stm32l0xx_hal.h Wed May 13 08:08:21 2015 +0200 @@ -0,0 +1,347 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal.h + * @author MCD Application Team + * @version V1.2.0 + * @date 06-February-2015 + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0xx_HAL_H +#define __STM32L0xx_HAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l0xx_hal_conf.h" + +/** @addtogroup STM32L0xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ +/** @defgroup HAL_Exported_Constants HAL Exported constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode Boot Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH ((uint32_t)0x00000000) +#define SYSCFG_BOOT_SYSTEMFLASH ((uint32_t)SYSCFG_CFGR1_MEM_MODE_0) +#define SYSCFG_BOOT_SRAM ((uint32_t)SYSCFG_CFGR1_BOOT_MODE) + +/** + * @} + */ + +/** @defgroup DBGMCU_Low_Power_Config + * @{ + */ +#define DBGMCU_SLEEP DBGMCU_CR_DBG_SLEEP +#define DBGMCU_STOP DBGMCU_CR_DBG_STOP +#define DBGMCU_STANDBY DBGMCU_CR_DBG_STANDBY +#define IS_DBGMCU_PERIPH(__PERIPH__) ((((__PERIPH__) & (~(DBGMCU_CR_DBG))) == 0x00) && ((__PERIPH__) != 0x00)) + + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_LCD_EXT_CAPA + * @{ + */ +#define SYSCFG_LCD_EXT_CAPA SYSCFG_CFGR2_CAPA /*!< Connection of internal Vlcd rail to external capacitors */ +#define SYSCFG_VLCD_PB2_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_0 /*!< Connection on PB2 */ +#define SYSCFG_VLCD_PB12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_1 /*!< Connection on PB12 */ +#define SYSCFG_VLCD_PE11_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_2 /*!< Connection on PB0 */ +#if defined (SYSCFG_CFGR2_CAPA_3) +#define SYSCFG_VLCD_PB0_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_3 /*!< Connection on PE11 */ +#endif +#if defined (SYSCFG_CFGR2_CAPA_4) +#define SYSCFG_VLCD_PE12_EXT_CAPA_ON SYSCFG_CFGR2_CAPA_4 /*!< Connection on PE12 */ +#endif + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_VREFINT_OUT_SELECT + * @{ + */ +#define SYSCFG_VREFINT_OUT_NONE ((uint32_t)0x00000000) /* no pad connected */ +#define SYSCFG_VREFINT_OUT_PB0 SYSCFG_CFGR3_VREF_OUT_0 /* Selects PBO as output for the Vrefint */ +#define SYSCFG_VREFINT_OUT_PB1 SYSCFG_CFGR3_VREF_OUT_1 /* Selects PB1 as output for the Vrefint */ +#define SYSCFG_VREFINT_OUT_PB0_PB1 SYSCFG_CFGR3_VREF_OUT /* Selects PBO and PB1 as output for the Vrefint */ + +#define IS_SYSCFG_VREFINT_OUT_SELECT(OUTPUT) (((OUTPUT) == SYSCFG_VREFINT_OUT_NONE) || \ + ((OUTPUT) == SYSCFG_VREFINT_OUT_PB0) || \ + ((OUTPUT) == SYSCFG_VREFINT_OUT_PB1) || \ + ((OUTPUT) == SYSCFG_VREFINT_OUT_PB0_PB1)) +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_flags_definition + * @{ + */ +#define SYSCFG_FLAG_VREFINT_READY SYSCFG_CFGR3_VREFINT_RDYF + +#define IS_SYSCFG_FLAG(FLAG) ((FLAG) == SYSCFG_FLAG_VREFINT_READY)) + +/** + * @} + */ + /** + * @} + */ + + /** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @brief Freeze/Unfreeze Peripherals in Debug mode + */ +#if defined (DBGMCU_APB1_FZ_DBG_TIM2_STOP) +/** + * @brief TIM2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM2_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_TIM3_STOP) +/** + * @brief TIM3 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->APB1FZ,DBGMCU_APB1_FZ_DBG_TIM3_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_TIM6_STOP) +/** + * @brief TIM6 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM6_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_TIM7_STOP) +/** + * @brief TIM7 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_TIM7_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_RTC_STOP) +/** + * @brief RTC Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_RTC() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_RTC_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_WWDG_STOP) +/** + * @brief WWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_WWDG_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_IWDG_STOP) +/** + * @brief IWDG Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_IWDG_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_I2C1_STOP) +/** + * @brief I2C1 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C1_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_I2C2_STOP) +/** + * @brief I2C2 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT_DBGMCU() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT_DBGMCU() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C2_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_I2C3_STOP) +/** + * @brief I2C3 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() SET_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() CLEAR_BIT(DBGMCU->APB1FZ, DBGMCU_APB1_FZ_DBG_I2C3_STOP) +#endif + +#if defined (DBGMCU_APB1_FZ_DBG_LPTIMER_STOP) +/** + * @brief LPTIMER Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_LPTIMER() SET_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP) +#define __HAL_DBGMCU_UNFREEZE_LPTIMER() CLEAR_BIT(DBGMCU->APB1FZ ,DBGMCU_APB1_FZ_DBG_LPTIMER_STOP) +#endif + +#if defined (DBGMCU_APB2_FZ_DBG_TIM22_STOP) +/** + * @brief TIM22 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM22() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM22() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM22_STOP) +#endif + +#if defined (DBGMCU_APB2_FZ_DBG_TIM21_STOP) +/** + * @brief TIM21 Peripherals Debug mode + */ +#define __HAL_DBGMCU_FREEZE_TIM21() SET_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM21() CLEAR_BIT(DBGMCU->APB2FZ, DBGMCU_APB2_FZ_DBG_TIM21_STOP) +#endif + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE) + +/** @brief System Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0) + + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() MODIFY_REG(SYSCFG->CFGR1, SYSCFG_CFGR1_MEM_MODE, SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1) + +/** @brief Configuration of the DBG Low Power mode. + * @param __DBGLPMODE__: bit field to indicate in wich Low Power mode DBG is still active. + * This parameter can be a value of @ref HAL_DBGMCU_Low_Power_Config + */ +#define __HAL_SYSCFG_DBG_LP_CONFIG(__DBGLPMODE__) do {assert_param(IS_DBGMCU_PERIPH(__DBGLPMODE__)); \ + MODIFY_REG(DBGMCU->CR, DBGMCU_CR_DBG, (__DBGLPMODE__)); \ + } while (0) +/** + * @brief Returns the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned can be a value of @ref HAL_SYSCFG_BootMode + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() READ_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_BOOT_MODE) + + +/** @brief Check whether the specified SYSCFG flag is set or not. + * @param __FLAG__: specifies the flag to check. + * This parameter can a value of @ref HAL_SYSCFG_flags_definition + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SYSCFG_GET_FLAG(__FLAG__) (((SYSCFG->CFGR3) & (__FLAG__)) == (__FLAG__)) + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); +HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); + +/** + * @} + */ + + /** @defgroup HAL_Exported_Functions_Group2 Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +void HAL_IncTick(void); +void HAL_Delay(__IO uint32_t Delay); +uint32_t HAL_GetTick(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetDEVID(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGStandbyMode(void); +void HAL_DBGMCU_DisableDBGStandbyMode(void); +void HAL_DBGMCU_DBG_EnableLowPowerConfig(uint32_t Periph); +void HAL_DBGMCU_DBG_DisableLowPowerConfig(uint32_t Periph); +uint32_t HAL_SYSCFG_GetBootMode(void); +void HAL_SYSCFG_EnableVREFINT(void); +void HAL_SYSCFG_DisableVREFINT(void); +void HAL_SYSCFG_Enable_Lock_VREFINT(void); +void HAL_SYSCFG_Disable_Lock_VREFINT(void); +void HAL_SYSCFG_VREFINT_OutputSelect(uint32_t SYSCFG_Vrefint_OUTPUT); + +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0xx_HAL_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +