Diff: TARGET_NUCLEO_F746ZG/stm32f7xx_hal_pwr.h

Revision:

115:87f2f5183dfb

Child:

116:c0f6e94411f5

diff -r 252557024ec3 -r 87f2f5183dfb TARGET_NUCLEO_F746ZG/stm32f7xx_hal_pwr.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_pwr.h	Wed Mar 02 09:58:28 2016 +0100
@@ -0,0 +1,424 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @version V1.0.1
+  * @date    25-June-2015
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_H
+#define __STM32F7xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */ 
+#define PWR_PVDLEVEL_0                  PWR_CR1_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR1_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR1_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR1_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR1_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR1_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR1_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR1_PLS_LEV7/* External input analog voltage 
+                                                          (Compare internally to VREFINT) */
+
+/**
+  * @}
+  */   
+ 
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003)   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR1_LPDS
+/**
+  * @}
+  */
+    
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+  * @{
+  */
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR1_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE2         PWR_CR1_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3         PWR_CR1_VOS_0
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR1_WUIF
+#define PWR_FLAG_SB                     PWR_CSR1_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR1_PVDO
+#define PWR_FLAG_BRR                    PWR_CSR1_BRR
+#define PWR_FLAG_VOSRDY                 PWR_CSR1_VOSRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                            __IO uint32_t tmpreg;                               \
+                                                            MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS);           \
+                                                            UNUSED(tmpreg);                                     \
+				                                                	} while(0)
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event 
+  *                  was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
+  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.    
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode 
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset 
+  *                  when the device wakes up from Standby mode or by a system reset 
+  *                  or power reset.  
+  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage 
+  *                 scaling output selection is ready.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |=  (__FLAG__) << 2)
+
+/**
+  * @brief Enable the PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD EXTI Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief  Generates a Software interrupt on PVD EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f7xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions  *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)EXTI_IMR_MR16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_WAKEUP_POLARITY(POLARITY)       (((POLARITY) == PWR_POLARITY_RISINGEDGE)  || \
+                                                    ((POLARITY) == PWR_POLARITY_FALLINGEDGE))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/