Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L476RG/stm32l4xx_hal_cryp.h
- Revision:
- 107:4f6c30876dfa
diff -r ba1f97679dad -r 4f6c30876dfa TARGET_NUCLEO_L476RG/stm32l4xx_hal_cryp.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_hal_cryp.h Wed Sep 16 15:32:31 2015 +0100
@@ -0,0 +1,666 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_cryp.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 26-June-2015
+ * @brief Header file of CRYP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_CRYP_H
+#define __STM32L4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32L485xx) || defined(STM32L486xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+ * @{
+ */
+
+/**
+ * @brief CRYP Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref CRYP_Data_Type */
+
+ uint32_t KeySize; /*!< 128 or 256-bit key length.
+ This parameter can be a value of @ref CRYP_Key_Size */
+
+ uint32_t OperatingMode; /*!< AES operating mode.
+ This parameter can be a value of @ref CRYP_AES_OperatingMode */
+
+ uint32_t ChainingMode; /*!< AES chaining mode.
+ This parameter can be a value of @ref CRYP_AES_ChainingMode */
+
+ uint32_t KeyWriteFlag; /*!< Allows to bypass or not key write-up before decryption.
+ This parameter can be a value of @ref CRYP_Key_Write */
+
+ uint32_t GCMCMACPhase; /*!< Indicates the processing phase of the Galois Counter Mode (GCM),
+ Galois Message Authentication Code (GMAC) or Cipher Message
+ Authentication Code (CMAC) mode.
+ This parameter can be a value of @ref CRYP_GCM_CMAC_Phase */
+
+ uint8_t* pKey; /*!< Encryption/Decryption Key */
+
+ uint8_t* pInitVect; /*!< Initialization Vector used for CTR, CBC, GCM/GMAC and CMAC modes */
+
+ uint8_t* Header; /*!< Header used in GCM/GMAC and CMAC modes */
+
+ uint64_t HeaderSize; /*!< Header size in bytes */
+
+}CRYP_InitTypeDef;
+
+/**
+ * @brief HAL CRYP State structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
+ HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
+ HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
+ HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
+ HAL_CRYP_STATE_ERROR = 0x04, /*!< CRYP error state */
+ HAL_CRYP_STATE_SUSPENDED = 0x05 /*!< CRYP suspended */
+}HAL_CRYP_STATETypeDef;
+
+/**
+ * @brief HAL CRYP phase structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
+ HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
+ HAL_CRYP_PHASE_START = 0x03, /*!< CRYP peripheral has been initialized but GCM/GMAC/CMAC
+ initialization phase has not started */
+ HAL_CRYP_PHASE_INIT_OVER = 0x04, /*!< GCM/GMAC/CMAC init phase has been carried out */
+ HAL_CRYP_PHASE_HEADER_OVER = 0x05, /*!< GCM/GMAC/CMAC header phase has been carried out */
+ HAL_CRYP_PHASE_PAYLOAD_OVER = 0x06, /*!< GCM/GMAC/CMAC payload phase has been carried out */
+ HAL_CRYP_PHASE_FINAL_OVER = 0x07, /*!< GCM/GMAC/CMAC final phase has been carried out */
+ HAL_CRYP_PHASE_HEADER_SUSPENDED = 0x08, /*!< GCM/GMAC/CMAC header phase has been suspended */
+ HAL_CRYP_PHASE_PAYLOAD_SUSPENDED = 0x09, /*!< GCM/GMAC payload phase has been suspended */
+ HAL_CRYP_PHASE_NOT_USED = 0x0a /*!< Phase is irrelevant to the current chaining mode */
+}HAL_PhaseTypeDef;
+
+/**
+ * @brief HAL CRYP mode suspend definitions
+ */
+typedef enum
+{
+ HAL_CRYP_SUSPEND_NONE = 0x00, /*!< CRYP peripheral suspension not requested */
+ HAL_CRYP_SUSPEND = 0x01 /*!< CRYP peripheral suspension requested */
+}HAL_SuspendTypeDef;
+
+
+/**
+ * @brief HAL CRYP Error Codes definition
+ */
+#define HAL_CRYP_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CRYP_WRITE_ERROR ((uint32_t)0x00000001) /*!< Write error */
+#define HAL_CRYP_READ_ERROR ((uint32_t)0x00000002) /*!< Read error */
+#define HAL_CRYP_DMA_ERROR ((uint32_t)0x00000004) /*!< DMA error */
+
+
+/**
+ * @brief CRYP handle Structure definition
+ */
+typedef struct
+{
+ AES_TypeDef *Instance; /*!< Register base address */
+
+ CRYP_InitTypeDef Init; /*!< CRYP initialization parameters */
+
+ uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) input buffer */
+
+ uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) output buffer */
+
+ __IO uint16_t CrypInCount; /*!< Input data size in bytes or, after suspension, the remaining
+ number of bytes to process */
+
+ __IO uint16_t CrypOutCount; /*!< Output data size in bytes */
+
+ HAL_PhaseTypeDef Phase; /*!< CRYP peripheral processing phase for GCM, GMAC or CMAC modes.
+ Indicates the last phase carried out to ease
+ phase transitions */
+
+ DMA_HandleTypeDef *hdmain; /*!< CRYP peripheral Input DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaout; /*!< CRYP peripheral Output DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRYP locking object */
+
+ __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
+
+ __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */
+
+ HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */
+}CRYP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+ * @{
+ */
+
+/** @defgroup CRYP_Key_Size Key size selection
+ * @{
+ */
+#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000) /*!< 128-bit long key */
+#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Data_Type AES Data Type selection
+ * @{
+ */
+#define CRYP_DATATYPE_32B ((uint32_t)0x00000000) /*!< 32-bit data type (no swapping) */
+#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */
+#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */
+#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */
+/**
+ * @}
+ */
+
+ /** @defgroup CRYP_AES_State AES Enable state
+ * @{
+ */
+#define CRYP_AES_DISABLE ((uint32_t)0x00000000) /*!< Disable AES */
+#define CRYP_AES_ENABLE AES_CR_EN /*!< Enable AES */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_AES_OperatingMode AES operating mode
+ * @{
+ */
+#define CRYP_ALGOMODE_ENCRYPT ((uint32_t)0x00000000) /*!< Encryption mode */
+#define CRYP_ALGOMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode */
+#define CRYP_ALGOMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */
+#define CRYP_ALGOMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption */
+#define CRYP_ALGOMODE_TAG_GENERATION ((uint32_t)0x00000000) /*!< GMAC or CMAC authentication tag generation */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_AES_ChainingMode AES chaining mode
+ * @{
+ */
+#define CRYP_CHAINMODE_AES_ECB ((uint32_t)0x00000000) /*!< Electronic codebook chaining algorithm */
+#define CRYP_CHAINMODE_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */
+#define CRYP_CHAINMODE_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */
+#define CRYP_CHAINMODE_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */
+#define CRYP_CHAINMODE_AES_CMAC AES_CR_CHMOD_2 /*!< Cipher message authentication code */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Key_Write AES decryption key write-up flag
+ * @{
+ */
+#define CRYP_KEY_WRITE_ENABLE ((uint32_t)0x00000000) /*!< Enable decryption key writing */
+#define CRYP_KEY_WRITE_DISABLE ((uint32_t)0x00000001) /*!< Disable decryption key writing */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_DMAIN DMA Input phase management enable state
+ * @{
+ */
+#define CRYP_DMAIN_DISABLE ((uint32_t)0x00000000) /*!< Disable DMA Input phase management */
+#define CRYP_DMAIN_ENABLE AES_CR_DMAINEN /*!< Enable DMA Input phase management */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_DMAOUT DMA Output phase management enable state
+ * @{
+ */
+#define CRYP_DMAOUT_DISABLE ((uint32_t)0x00000000) /*!< Disable DMA Output phase management */
+#define CRYP_DMAOUT_ENABLE AES_CR_DMAOUTEN /*!< Enable DMA Output phase management */
+/**
+ * @}
+ */
+
+
+/** @defgroup CRYP_GCM_CMAC_Phase GCM/GMAC and CMAC processing phase selection
+ * @{
+ */
+#define CRYP_GCM_INIT_PHASE ((uint32_t)0x00000000) /*!< GCM/GMAC init phase */
+#define CRYP_GCMCMAC_HEADER_PHASE AES_CR_GCMPH_0 /*!< GCM/GMAC or CMAC header phase */
+#define CRYP_GCM_PAYLOAD_PHASE AES_CR_GCMPH_1 /*!< GCM payload phaset */
+#define CRYP_GCMCMAC_FINAL_PHASE AES_CR_GCMPH /*!< GCM/GMAC or CMAC final phase */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Flags AES status flags
+ * @{
+ */
+
+#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */
+#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */
+#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */
+#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Clear_Flags AES clearing flags
+ * @{
+ */
+
+#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */
+#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */
+/**
+ * @}
+ */
+
+/** @defgroup AES_Interrupts_Enable AES Interrupts Enable bits
+ * @{
+ */
+#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */
+#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Interrupts_Flags AES Interrupts flags
+ * @{
+ */
+#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */
+#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */
+#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRYP handle state.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+ * @brief Enable the CRYP AES peripheral.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE() (AES->CR |= AES_CR_EN)
+
+/**
+ * @brief Disable the CRYP AES peripheral.
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE() (AES->CR &= ~AES_CR_EN)
+
+/**
+ * @brief Set the algorithm operating mode.
+ * @param __OPERATING_MODE__: specifies the operating mode
+ * This parameter can be one of the following values:
+ * @arg CRYP_ALGOMODE_ENCRYPT: encryption
+ * @arg CRYP_ALGOMODE_KEYDERIVATION: key derivation
+ * @arg CRYP_ALGOMODE_DECRYPT: decryption
+ * @arg CRYP_ALGOMODE_KEYDERIVATION_DECRYPT: key derivation and decryption
+ * @retval None
+ */
+#define __HAL_CRYP_SET_OPERATINGMODE(__OPERATING_MODE__) MODIFY_REG(AES->CR, AES_CR_MODE, (__OPERATING_MODE__))
+
+
+/**
+ * @brief Set the algorithm chaining mode.
+ * @param __CHAINING_MODE__: specifies the chaining mode
+ * This parameter can be one of the following values:
+ * @arg CRYP_CHAINMODE_AES_ECB: Electronic CodeBook
+ * @arg CRYP_CHAINMODE_AES_CBC: Cipher Block Chaining
+ * @arg CRYP_CHAINMODE_AES_CTR: CounTeR mode
+ * @arg CRYP_CHAINMODE_AES_GCM_GMAC: Galois Counter Mode or Galois Message Authentication Code
+ * @arg CRYP_CHAINMODE_AES_CMAC: Cipher Message Authentication Code
+ * @retval None
+ */
+#define __HAL_CRYP_SET_CHAININGMODE(__CHAINING_MODE__) MODIFY_REG(AES->CR, AES_CR_CHMOD, (__CHAINING_MODE__))
+
+
+
+/** @brief Check whether the specified CRYP status flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_FLAG_BUSY: GCM process suspension forbidden
+ * @arg CRYP_IT_WRERR: Write Error
+ * @arg CRYP_IT_RDERR: Read Error
+ * @arg CRYP_IT_CCF: Computation Complete
+ * @retval The state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_FLAG(__FLAG__) ((AES->SR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Clear the CRYP pending status flag.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CRYP_ERR_CLEAR: Read (RDERR) or Write Error (WRERR) Flag Clear
+ * @arg CRYP_CCF_CLEAR: Computation Complete Flag (CCF) Clear
+ * @retval None
+ */
+#define __HAL_CRYP_CLEAR_FLAG(__FLAG__) SET_BIT(AES->CR, (__FLAG__))
+
+
+
+/** @brief Check whether the specified CRYP interrupt source is enabled or not.
+ * @param __INTERRUPT__: CRYP interrupt source to check
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_ERRIE: Error interrupt (used for RDERR and WRERR)
+ * @arg CRYP_IT_CCFIE: Computation Complete interrupt
+ * @retval State of interruption (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT_SOURCE(__INTERRUPT__) ((AES->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+
+/** @brief Check whether the specified CRYP interrupt is set or not.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_WRERR: Write Error
+ * @arg CRYP_IT_RDERR: Read Error
+ * @arg CRYP_IT_CCF: Computation Complete
+ * @retval The state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((AES->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+
+
+/** @brief Clear the CRYP pending interrupt.
+ * @param __INTERRUPT__: specifies the IT to clear.
+ * This parameter can be one of the following values:
+ * @arg CRYP_ERR_CLEAR: Read (RDERR) or Write Error (WRERR) Flag Clear
+ * @arg CRYP_CCF_CLEAR: Computation Complete Flag (CCF) Clear
+ * @retval None
+ */
+#define __HAL_CRYP_CLEAR_IT(__INTERRUPT__) SET_BIT(AES->CR, (__INTERRUPT__))
+
+
+/**
+ * @brief Enable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_ERRIE: Error interrupt (used for RDERR and WRERR)
+ * @arg CRYP_IT_CCFIE: Computation Complete interrupt
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((AES->CR) |= (__INTERRUPT__))
+
+
+/**
+ * @brief Disable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_ERRIE: Error interrupt (used for RDERR and WRERR)
+ * @arg CRYP_IT_CCFIE: Computation Complete interrupt
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((AES->CR) &= ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup CRYP_Private_Macros CRYP Private Macros
+ * @{
+ */
+
+/**
+ * @brief Verify the key size length.
+ * @param __KEYSIZE__: Ciphering/deciphering algorithm key size.
+ * @retval SET (__KEYSIZE__ is a valid value) or RESET (__KEYSIZE__ is invalid)
+ */
+#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \
+ ((__KEYSIZE__) == CRYP_KEYSIZE_256B))
+
+/**
+ * @brief Verify the input data type.
+ * @param __DATATYPE__: Ciphering/deciphering algorithm input data type.
+ * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)
+ */
+#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_16B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_8B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_1B))
+
+/**
+ * @brief Verify the CRYP AES IP running mode.
+ * @param __MODE__: CRYP AES IP running mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_CRYP_AES(__MODE__) (((__MODE__) == CRYP_AES_DISABLE) || \
+ ((__MODE__) == CRYP_AES_ENABLE))
+
+/**
+ * @brief Verify the selected CRYP algorithm.
+ * @param __ALGOMODE__: Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter).
+ * @retval SET (__ALGOMODE__ is valid) or RESET (__ALGOMODE__ is invalid)
+ */
+#define IS_CRYP_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == CRYP_ALGOMODE_ENCRYPT) || \
+ ((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION) || \
+ ((__ALGOMODE__) == CRYP_ALGOMODE_DECRYPT) || \
+ ((__ALGOMODE__) == CRYP_ALGOMODE_TAG_GENERATION) || \
+ ((__ALGOMODE__) == CRYP_ALGOMODE_KEYDERIVATION_DECRYPT))
+
+/**
+ * @brief Verify the selected CRYP chaining algorithm.
+ * @param __CHAINMODE__: Selected CRYP chaining algorithm.
+ * @retval SET (__CHAINMODE__ is valid) or RESET (__CHAINMODE__ is invalid)
+ */
+#define IS_CRYP_CHAINMODE(__CHAINMODE__) (((__CHAINMODE__) == CRYP_CHAINMODE_AES_ECB) || \
+ ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CBC) || \
+ ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CTR) || \
+ ((__CHAINMODE__) == CRYP_CHAINMODE_AES_GCM_GMAC) || \
+ ((__CHAINMODE__) == CRYP_CHAINMODE_AES_CMAC))
+
+/**
+ * @brief Verify the deciphering key write option.
+ * @param __WRITE__: deciphering key write option.
+ * @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid)
+ */
+#define IS_CRYP_WRITE(__WRITE__) (((__WRITE__) == CRYP_KEY_WRITE_ENABLE) || \
+ ((__WRITE__) == CRYP_KEY_WRITE_DISABLE))
+
+/**
+ * @brief Verify the CRYP input data DMA mode.
+ * @param __MODE__: CRYP input data DMA mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_CRYP_DMAIN(__MODE__) (((__MODE__) == CRYP_DMAIN_DISABLE) || \
+ ((__MODE__) == CRYP_DMAIN_ENABLE))
+
+/**
+ * @brief Verify the CRYP output data DMA mode.
+ * @param __MODE__: CRYP output data DMA mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#define IS_CRYP_DMAOUT(__MODE__) (((__MODE__) == CRYP_DMAOUT_DISABLE) || \
+ ((__MODE__) == CRYP_DMAOUT_ENABLE))
+
+/**
+ * @brief Verify the CRYP AES ciphering/deciphering/authentication algorithm phase.
+ * @param __PHASE__: CRYP AES ciphering/deciphering/authentication algorithm phase.
+ * @retval SET (__PHASE__ is valid) or RESET (__PHASE__ is invalid)
+ */
+#define IS_CRYP_GCMCMAC_PHASE(__PHASE__) (((__PHASE__) == CRYP_GCM_INIT_PHASE) || \
+ ((__PHASE__) == CRYP_GCMCMAC_HEADER_PHASE) || \
+ ((__PHASE__) == CRYP_GCM_PAYLOAD_PHASE) || \
+ ((__PHASE__) == CRYP_GCMCMAC_FINAL_PHASE))
+
+/**
+ * @}
+ */
+
+/* Include CRYP HAL Extended module */
+#include "stm32l4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions CRYP Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRYP_Group1 Initialization and deinitialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+
+/* MSP initialization/de-initialization functions ****************************/
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Group2 AES processing functions
+ * @{
+ */
+
+/* AES encryption/decryption processing functions ****************************/
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Group3 Callback functions
+ * @{
+ */
+/* CallBack functions ********************************************************/
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Group4 CRYP IRQ handler
+ * @{
+ */
+
+/* AES interrupt handling function *******************************************/
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Group5 Peripheral State functions
+ * @{
+ */
+
+/* Peripheral State functions ************************************************/
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32L485xx) || defined(STM32L486xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/