Diff: TARGET_SAMD21G18A/ins_pm.h

Revision:

111:4336505e4b1c

diff -r 165afa46840b -r 4336505e4b1c TARGET_SAMD21G18A/ins_pm.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21G18A/ins_pm.h	Tue Dec 15 14:39:38 2015 +0000
@@ -0,0 +1,92 @@
+/**
+ * \file
+ *
+ * \brief Instance description for PM
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_PM_INSTANCE_
+#define _SAMD21_PM_INSTANCE_
+
+/* ========== Register definition for PM peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_PM_CTRL                (0x40000400U) /**< \brief (PM) Control */
+#define REG_PM_SLEEP               (0x40000401U) /**< \brief (PM) Sleep Mode */
+#define REG_PM_EXTCTRL             (0x40000402U) /**< \brief (PM) External Reset Controller */
+#define REG_PM_CPUSEL              (0x40000408U) /**< \brief (PM) CPU Clock Select */
+#define REG_PM_APBASEL             (0x40000409U) /**< \brief (PM) APBA Clock Select */
+#define REG_PM_APBBSEL             (0x4000040AU) /**< \brief (PM) APBB Clock Select */
+#define REG_PM_APBCSEL             (0x4000040BU) /**< \brief (PM) APBC Clock Select */
+#define REG_PM_AHBMASK             (0x40000414U) /**< \brief (PM) AHB Mask */
+#define REG_PM_APBAMASK            (0x40000418U) /**< \brief (PM) APBA Mask */
+#define REG_PM_APBBMASK            (0x4000041CU) /**< \brief (PM) APBB Mask */
+#define REG_PM_APBCMASK            (0x40000420U) /**< \brief (PM) APBC Mask */
+#define REG_PM_INTENCLR            (0x40000434U) /**< \brief (PM) Interrupt Enable Clear */
+#define REG_PM_INTENSET            (0x40000435U) /**< \brief (PM) Interrupt Enable Set */
+#define REG_PM_INTFLAG             (0x40000436U) /**< \brief (PM) Interrupt Flag Status and Clear */
+#define REG_PM_RCAUSE              (0x40000438U) /**< \brief (PM) Reset Cause */
+#else
+#define REG_PM_CTRL                (*(RwReg8 *)0x40000400U) /**< \brief (PM) Control */
+#define REG_PM_SLEEP               (*(RwReg8 *)0x40000401U) /**< \brief (PM) Sleep Mode */
+#define REG_PM_EXTCTRL             (*(RwReg8 *)0x40000402U) /**< \brief (PM) External Reset Controller */
+#define REG_PM_CPUSEL              (*(RwReg8 *)0x40000408U) /**< \brief (PM) CPU Clock Select */
+#define REG_PM_APBASEL             (*(RwReg8 *)0x40000409U) /**< \brief (PM) APBA Clock Select */
+#define REG_PM_APBBSEL             (*(RwReg8 *)0x4000040AU) /**< \brief (PM) APBB Clock Select */
+#define REG_PM_APBCSEL             (*(RwReg8 *)0x4000040BU) /**< \brief (PM) APBC Clock Select */
+#define REG_PM_AHBMASK             (*(RwReg  *)0x40000414U) /**< \brief (PM) AHB Mask */
+#define REG_PM_APBAMASK            (*(RwReg  *)0x40000418U) /**< \brief (PM) APBA Mask */
+#define REG_PM_APBBMASK            (*(RwReg  *)0x4000041CU) /**< \brief (PM) APBB Mask */
+#define REG_PM_APBCMASK            (*(RwReg  *)0x40000420U) /**< \brief (PM) APBC Mask */
+#define REG_PM_INTENCLR            (*(RwReg8 *)0x40000434U) /**< \brief (PM) Interrupt Enable Clear */
+#define REG_PM_INTENSET            (*(RwReg8 *)0x40000435U) /**< \brief (PM) Interrupt Enable Set */
+#define REG_PM_INTFLAG             (*(RwReg8 *)0x40000436U) /**< \brief (PM) Interrupt Flag Status and Clear */
+#define REG_PM_RCAUSE              (*(RoReg8 *)0x40000438U) /**< \brief (PM) Reset Cause */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for PM peripheral ========== */
+#define PM_CTRL_MCSEL_DFLL48M       3
+#define PM_CTRL_MCSEL_GCLK          0
+#define PM_CTRL_MCSEL_OSC8M         1
+#define PM_CTRL_MCSEL_XOSC          2
+#define PM_PM_CLK_APB_NUM           2
+
+#endif /* _SAMD21_PM_INSTANCE_ */