Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_SAMD21G18A/comp_usb.h
- Revision:
- 111:4336505e4b1c
diff -r 165afa46840b -r 4336505e4b1c TARGET_SAMD21G18A/comp_usb.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21G18A/comp_usb.h Tue Dec 15 14:39:38 2015 +0000
@@ -0,0 +1,1807 @@
+/**
+ * \file
+ *
+ * \brief Component description for USB
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_USB_COMPONENT_
+#define _SAMD21_USB_COMPONENT_
+
+/* ========================================================================== */
+/** SOFTWARE API DEFINITION FOR USB */
+/* ========================================================================== */
+/** \addtogroup SAMD21_USB Universal Serial Bus */
+/*@{*/
+
+#define USB_U2222
+#define REV_USB 0x103
+
+/* -------- USB_CTRLA : (USB Offset: 0x000) (R/W 8) Control A -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t SWRST:1; /*!< bit: 0 Software Reset */
+ uint8_t ENABLE:1; /*!< bit: 1 Enable */
+ uint8_t RUNSTDBY:1; /*!< bit: 2 Run in Standby Mode */
+ uint8_t :4; /*!< bit: 3.. 6 Reserved */
+ uint8_t MODE:1; /*!< bit: 7 Operating Mode */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_CTRLA_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_CTRLA_OFFSET 0x000 /**< \brief (USB_CTRLA offset) Control A */
+#define USB_CTRLA_RESETVALUE 0x00ul /**< \brief (USB_CTRLA reset_value) Control A */
+
+#define USB_CTRLA_SWRST_Pos 0 /**< \brief (USB_CTRLA) Software Reset */
+#define USB_CTRLA_SWRST (0x1ul << USB_CTRLA_SWRST_Pos)
+#define USB_CTRLA_ENABLE_Pos 1 /**< \brief (USB_CTRLA) Enable */
+#define USB_CTRLA_ENABLE (0x1ul << USB_CTRLA_ENABLE_Pos)
+#define USB_CTRLA_RUNSTDBY_Pos 2 /**< \brief (USB_CTRLA) Run in Standby Mode */
+#define USB_CTRLA_RUNSTDBY (0x1ul << USB_CTRLA_RUNSTDBY_Pos)
+#define USB_CTRLA_MODE_Pos 7 /**< \brief (USB_CTRLA) Operating Mode */
+#define USB_CTRLA_MODE (0x1ul << USB_CTRLA_MODE_Pos)
+#define USB_CTRLA_MODE_DEVICE_Val 0x0ul /**< \brief (USB_CTRLA) Device Mode */
+#define USB_CTRLA_MODE_HOST_Val 0x1ul /**< \brief (USB_CTRLA) Host Mode */
+#define USB_CTRLA_MODE_DEVICE (USB_CTRLA_MODE_DEVICE_Val << USB_CTRLA_MODE_Pos)
+#define USB_CTRLA_MODE_HOST (USB_CTRLA_MODE_HOST_Val << USB_CTRLA_MODE_Pos)
+#define USB_CTRLA_MASK 0x87ul /**< \brief (USB_CTRLA) MASK Register */
+
+/* -------- USB_SYNCBUSY : (USB Offset: 0x002) (R/ 8) Synchronization Busy -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t SWRST:1; /*!< bit: 0 Software Reset Synchronization Busy */
+ uint8_t ENABLE:1; /*!< bit: 1 Enable Synchronization Busy */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_SYNCBUSY_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_SYNCBUSY_OFFSET 0x002 /**< \brief (USB_SYNCBUSY offset) Synchronization Busy */
+#define USB_SYNCBUSY_RESETVALUE 0x00ul /**< \brief (USB_SYNCBUSY reset_value) Synchronization Busy */
+
+#define USB_SYNCBUSY_SWRST_Pos 0 /**< \brief (USB_SYNCBUSY) Software Reset Synchronization Busy */
+#define USB_SYNCBUSY_SWRST (0x1ul << USB_SYNCBUSY_SWRST_Pos)
+#define USB_SYNCBUSY_ENABLE_Pos 1 /**< \brief (USB_SYNCBUSY) Enable Synchronization Busy */
+#define USB_SYNCBUSY_ENABLE (0x1ul << USB_SYNCBUSY_ENABLE_Pos)
+#define USB_SYNCBUSY_MASK 0x03ul /**< \brief (USB_SYNCBUSY) MASK Register */
+
+/* -------- USB_QOSCTRL : (USB Offset: 0x003) (R/W 8) USB Quality Of Service -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t CQOS:2; /*!< bit: 0.. 1 Configuration Quality of Service */
+ uint8_t DQOS:2; /*!< bit: 2.. 3 Data Quality of Service */
+ uint8_t :4; /*!< bit: 4.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_QOSCTRL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_QOSCTRL_OFFSET 0x003 /**< \brief (USB_QOSCTRL offset) USB Quality Of Service */
+#define USB_QOSCTRL_RESETVALUE 0x05ul /**< \brief (USB_QOSCTRL reset_value) USB Quality Of Service */
+
+#define USB_QOSCTRL_CQOS_Pos 0 /**< \brief (USB_QOSCTRL) Configuration Quality of Service */
+#define USB_QOSCTRL_CQOS_Msk (0x3ul << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_CQOS(value) ((USB_QOSCTRL_CQOS_Msk & ((value) << USB_QOSCTRL_CQOS_Pos)))
+#define USB_QOSCTRL_CQOS_DISABLE_Val 0x0ul /**< \brief (USB_QOSCTRL) Background (no sensitive operation) */
+#define USB_QOSCTRL_CQOS_LOW_Val 0x1ul /**< \brief (USB_QOSCTRL) Sensitive Bandwidth */
+#define USB_QOSCTRL_CQOS_MEDIUM_Val 0x2ul /**< \brief (USB_QOSCTRL) Sensitive Latency */
+#define USB_QOSCTRL_CQOS_HIGH_Val 0x3ul /**< \brief (USB_QOSCTRL) Critical Latency */
+#define USB_QOSCTRL_CQOS_DISABLE (USB_QOSCTRL_CQOS_DISABLE_Val << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_CQOS_LOW (USB_QOSCTRL_CQOS_LOW_Val << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_CQOS_MEDIUM (USB_QOSCTRL_CQOS_MEDIUM_Val << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_CQOS_HIGH (USB_QOSCTRL_CQOS_HIGH_Val << USB_QOSCTRL_CQOS_Pos)
+#define USB_QOSCTRL_DQOS_Pos 2 /**< \brief (USB_QOSCTRL) Data Quality of Service */
+#define USB_QOSCTRL_DQOS_Msk (0x3ul << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_DQOS(value) ((USB_QOSCTRL_DQOS_Msk & ((value) << USB_QOSCTRL_DQOS_Pos)))
+#define USB_QOSCTRL_DQOS_DISABLE_Val 0x0ul /**< \brief (USB_QOSCTRL) Background (no sensitive operation) */
+#define USB_QOSCTRL_DQOS_LOW_Val 0x1ul /**< \brief (USB_QOSCTRL) Sensitive Bandwidth */
+#define USB_QOSCTRL_DQOS_MEDIUM_Val 0x2ul /**< \brief (USB_QOSCTRL) Sensitive Latency */
+#define USB_QOSCTRL_DQOS_HIGH_Val 0x3ul /**< \brief (USB_QOSCTRL) Critical Latency */
+#define USB_QOSCTRL_DQOS_DISABLE (USB_QOSCTRL_DQOS_DISABLE_Val << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_DQOS_LOW (USB_QOSCTRL_DQOS_LOW_Val << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_DQOS_MEDIUM (USB_QOSCTRL_DQOS_MEDIUM_Val << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_DQOS_HIGH (USB_QOSCTRL_DQOS_HIGH_Val << USB_QOSCTRL_DQOS_Pos)
+#define USB_QOSCTRL_MASK 0x0Ful /**< \brief (USB_QOSCTRL) MASK Register */
+
+/* -------- USB_DEVICE_CTRLB : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE Control B -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t DETACH:1; /*!< bit: 0 Detach */
+ uint16_t UPRSM:1; /*!< bit: 1 Upstream Resume */
+ uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration */
+ uint16_t NREPLY:1; /*!< bit: 4 No Reply */
+ uint16_t TSTJ:1; /*!< bit: 5 Test mode J */
+ uint16_t TSTK:1; /*!< bit: 6 Test mode K */
+ uint16_t TSTPCKT:1; /*!< bit: 7 Test packet mode */
+ uint16_t OPMODE2:1; /*!< bit: 8 Specific Operational Mode */
+ uint16_t GNAK:1; /*!< bit: 9 Global NAK */
+ uint16_t LPMHDSK:2; /*!< bit: 10..11 Link Power Management Handshake */
+ uint16_t :4; /*!< bit: 12..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_CTRLB_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_CTRLB_OFFSET 0x008 /**< \brief (USB_DEVICE_CTRLB offset) DEVICE Control B */
+#define USB_DEVICE_CTRLB_RESETVALUE 0x0001ul /**< \brief (USB_DEVICE_CTRLB reset_value) DEVICE Control B */
+
+#define USB_DEVICE_CTRLB_DETACH_Pos 0 /**< \brief (USB_DEVICE_CTRLB) Detach */
+#define USB_DEVICE_CTRLB_DETACH (0x1ul << USB_DEVICE_CTRLB_DETACH_Pos)
+#define USB_DEVICE_CTRLB_UPRSM_Pos 1 /**< \brief (USB_DEVICE_CTRLB) Upstream Resume */
+#define USB_DEVICE_CTRLB_UPRSM (0x1ul << USB_DEVICE_CTRLB_UPRSM_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_DEVICE_CTRLB) Speed Configuration */
+#define USB_DEVICE_CTRLB_SPDCONF_Msk (0x3ul << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF(value) ((USB_DEVICE_CTRLB_SPDCONF_Msk & ((value) << USB_DEVICE_CTRLB_SPDCONF_Pos)))
+#define USB_DEVICE_CTRLB_SPDCONF_FS_Val 0x0ul /**< \brief (USB_DEVICE_CTRLB) FS : Full Speed */
+#define USB_DEVICE_CTRLB_SPDCONF_LS_Val 0x1ul /**< \brief (USB_DEVICE_CTRLB) LS : Low Speed */
+#define USB_DEVICE_CTRLB_SPDCONF_HS_Val 0x2ul /**< \brief (USB_DEVICE_CTRLB) HS : High Speed capable */
+#define USB_DEVICE_CTRLB_SPDCONF_HSTM_Val 0x3ul /**< \brief (USB_DEVICE_CTRLB) HSTM: High Speed Test Mode (force high-speed mode for test mode) */
+#define USB_DEVICE_CTRLB_SPDCONF_FS (USB_DEVICE_CTRLB_SPDCONF_FS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_LS (USB_DEVICE_CTRLB_SPDCONF_LS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_HS (USB_DEVICE_CTRLB_SPDCONF_HS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_SPDCONF_HSTM (USB_DEVICE_CTRLB_SPDCONF_HSTM_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
+#define USB_DEVICE_CTRLB_NREPLY_Pos 4 /**< \brief (USB_DEVICE_CTRLB) No Reply */
+#define USB_DEVICE_CTRLB_NREPLY (0x1ul << USB_DEVICE_CTRLB_NREPLY_Pos)
+#define USB_DEVICE_CTRLB_TSTJ_Pos 5 /**< \brief (USB_DEVICE_CTRLB) Test mode J */
+#define USB_DEVICE_CTRLB_TSTJ (0x1ul << USB_DEVICE_CTRLB_TSTJ_Pos)
+#define USB_DEVICE_CTRLB_TSTK_Pos 6 /**< \brief (USB_DEVICE_CTRLB) Test mode K */
+#define USB_DEVICE_CTRLB_TSTK (0x1ul << USB_DEVICE_CTRLB_TSTK_Pos)
+#define USB_DEVICE_CTRLB_TSTPCKT_Pos 7 /**< \brief (USB_DEVICE_CTRLB) Test packet mode */
+#define USB_DEVICE_CTRLB_TSTPCKT (0x1ul << USB_DEVICE_CTRLB_TSTPCKT_Pos)
+#define USB_DEVICE_CTRLB_OPMODE2_Pos 8 /**< \brief (USB_DEVICE_CTRLB) Specific Operational Mode */
+#define USB_DEVICE_CTRLB_OPMODE2 (0x1ul << USB_DEVICE_CTRLB_OPMODE2_Pos)
+#define USB_DEVICE_CTRLB_GNAK_Pos 9 /**< \brief (USB_DEVICE_CTRLB) Global NAK */
+#define USB_DEVICE_CTRLB_GNAK (0x1ul << USB_DEVICE_CTRLB_GNAK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_Pos 10 /**< \brief (USB_DEVICE_CTRLB) Link Power Management Handshake */
+#define USB_DEVICE_CTRLB_LPMHDSK_Msk (0x3ul << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK(value) ((USB_DEVICE_CTRLB_LPMHDSK_Msk & ((value) << USB_DEVICE_CTRLB_LPMHDSK_Pos)))
+#define USB_DEVICE_CTRLB_LPMHDSK_NO_Val 0x0ul /**< \brief (USB_DEVICE_CTRLB) No handshake. LPM is not supported */
+#define USB_DEVICE_CTRLB_LPMHDSK_ACK_Val 0x1ul /**< \brief (USB_DEVICE_CTRLB) ACK */
+#define USB_DEVICE_CTRLB_LPMHDSK_NYET_Val 0x2ul /**< \brief (USB_DEVICE_CTRLB) NYET */
+#define USB_DEVICE_CTRLB_LPMHDSK_STALL_Val 0x3ul /**< \brief (USB_DEVICE_CTRLB) STALL */
+#define USB_DEVICE_CTRLB_LPMHDSK_NO (USB_DEVICE_CTRLB_LPMHDSK_NO_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_ACK (USB_DEVICE_CTRLB_LPMHDSK_ACK_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_NYET (USB_DEVICE_CTRLB_LPMHDSK_NYET_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_LPMHDSK_STALL (USB_DEVICE_CTRLB_LPMHDSK_STALL_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
+#define USB_DEVICE_CTRLB_MASK 0x0FFFul /**< \brief (USB_DEVICE_CTRLB) MASK Register */
+
+/* -------- USB_HOST_CTRLB : (USB Offset: 0x008) (R/W 16) HOST HOST Control B -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t :1; /*!< bit: 0 Reserved */
+ uint16_t RESUME:1; /*!< bit: 1 Send USB Resume */
+ uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration for Host */
+ uint16_t :1; /*!< bit: 4 Reserved */
+ uint16_t TSTJ:1; /*!< bit: 5 Test mode J */
+ uint16_t TSTK:1; /*!< bit: 6 Test mode K */
+ uint16_t :1; /*!< bit: 7 Reserved */
+ uint16_t SOFE:1; /*!< bit: 8 Start of Frame Generation Enable */
+ uint16_t BUSRESET:1; /*!< bit: 9 Send USB Reset */
+ uint16_t VBUSOK:1; /*!< bit: 10 VBUS is OK */
+ uint16_t L1RESUME:1; /*!< bit: 11 Send L1 Resume */
+ uint16_t :4; /*!< bit: 12..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_CTRLB_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_CTRLB_OFFSET 0x008 /**< \brief (USB_HOST_CTRLB offset) HOST Control B */
+#define USB_HOST_CTRLB_RESETVALUE 0x0000ul /**< \brief (USB_HOST_CTRLB reset_value) HOST Control B */
+
+#define USB_HOST_CTRLB_RESUME_Pos 1 /**< \brief (USB_HOST_CTRLB) Send USB Resume */
+#define USB_HOST_CTRLB_RESUME (0x1ul << USB_HOST_CTRLB_RESUME_Pos)
+#define USB_HOST_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_HOST_CTRLB) Speed Configuration for Host */
+#define USB_HOST_CTRLB_SPDCONF_Msk (0x3ul << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_SPDCONF(value) ((USB_HOST_CTRLB_SPDCONF_Msk & ((value) << USB_HOST_CTRLB_SPDCONF_Pos)))
+#define USB_HOST_CTRLB_SPDCONF_NORMAL_Val 0x0ul /**< \brief (USB_HOST_CTRLB) Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable. */
+#define USB_HOST_CTRLB_SPDCONF_FS_Val 0x3ul /**< \brief (USB_HOST_CTRLB) Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only. */
+#define USB_HOST_CTRLB_SPDCONF_NORMAL (USB_HOST_CTRLB_SPDCONF_NORMAL_Val << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_SPDCONF_FS (USB_HOST_CTRLB_SPDCONF_FS_Val << USB_HOST_CTRLB_SPDCONF_Pos)
+#define USB_HOST_CTRLB_TSTJ_Pos 5 /**< \brief (USB_HOST_CTRLB) Test mode J */
+#define USB_HOST_CTRLB_TSTJ (0x1ul << USB_HOST_CTRLB_TSTJ_Pos)
+#define USB_HOST_CTRLB_TSTK_Pos 6 /**< \brief (USB_HOST_CTRLB) Test mode K */
+#define USB_HOST_CTRLB_TSTK (0x1ul << USB_HOST_CTRLB_TSTK_Pos)
+#define USB_HOST_CTRLB_SOFE_Pos 8 /**< \brief (USB_HOST_CTRLB) Start of Frame Generation Enable */
+#define USB_HOST_CTRLB_SOFE (0x1ul << USB_HOST_CTRLB_SOFE_Pos)
+#define USB_HOST_CTRLB_BUSRESET_Pos 9 /**< \brief (USB_HOST_CTRLB) Send USB Reset */
+#define USB_HOST_CTRLB_BUSRESET (0x1ul << USB_HOST_CTRLB_BUSRESET_Pos)
+#define USB_HOST_CTRLB_VBUSOK_Pos 10 /**< \brief (USB_HOST_CTRLB) VBUS is OK */
+#define USB_HOST_CTRLB_VBUSOK (0x1ul << USB_HOST_CTRLB_VBUSOK_Pos)
+#define USB_HOST_CTRLB_L1RESUME_Pos 11 /**< \brief (USB_HOST_CTRLB) Send L1 Resume */
+#define USB_HOST_CTRLB_L1RESUME (0x1ul << USB_HOST_CTRLB_L1RESUME_Pos)
+#define USB_HOST_CTRLB_MASK 0x0F6Eul /**< \brief (USB_HOST_CTRLB) MASK Register */
+
+/* -------- USB_DEVICE_DADD : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE Device Address -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DADD:7; /*!< bit: 0.. 6 Device Address */
+ uint8_t ADDEN:1; /*!< bit: 7 Device Address Enable */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_DADD_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_DADD_OFFSET 0x00A /**< \brief (USB_DEVICE_DADD offset) DEVICE Device Address */
+#define USB_DEVICE_DADD_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_DADD reset_value) DEVICE Device Address */
+
+#define USB_DEVICE_DADD_DADD_Pos 0 /**< \brief (USB_DEVICE_DADD) Device Address */
+#define USB_DEVICE_DADD_DADD_Msk (0x7Ful << USB_DEVICE_DADD_DADD_Pos)
+#define USB_DEVICE_DADD_DADD(value) ((USB_DEVICE_DADD_DADD_Msk & ((value) << USB_DEVICE_DADD_DADD_Pos)))
+#define USB_DEVICE_DADD_ADDEN_Pos 7 /**< \brief (USB_DEVICE_DADD) Device Address Enable */
+#define USB_DEVICE_DADD_ADDEN (0x1ul << USB_DEVICE_DADD_ADDEN_Pos)
+#define USB_DEVICE_DADD_MASK 0xFFul /**< \brief (USB_DEVICE_DADD) MASK Register */
+
+/* -------- USB_HOST_HSOFC : (USB Offset: 0x00A) (R/W 8) HOST HOST Host Start Of Frame Control -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t FLENC:4; /*!< bit: 0.. 3 Frame Length Control */
+ uint8_t :3; /*!< bit: 4.. 6 Reserved */
+ uint8_t FLENCE:1; /*!< bit: 7 Frame Length Control Enable */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_HSOFC_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_HSOFC_OFFSET 0x00A /**< \brief (USB_HOST_HSOFC offset) HOST Host Start Of Frame Control */
+#define USB_HOST_HSOFC_RESETVALUE 0x00ul /**< \brief (USB_HOST_HSOFC reset_value) HOST Host Start Of Frame Control */
+
+#define USB_HOST_HSOFC_FLENC_Pos 0 /**< \brief (USB_HOST_HSOFC) Frame Length Control */
+#define USB_HOST_HSOFC_FLENC_Msk (0xFul << USB_HOST_HSOFC_FLENC_Pos)
+#define USB_HOST_HSOFC_FLENC(value) ((USB_HOST_HSOFC_FLENC_Msk & ((value) << USB_HOST_HSOFC_FLENC_Pos)))
+#define USB_HOST_HSOFC_FLENCE_Pos 7 /**< \brief (USB_HOST_HSOFC) Frame Length Control Enable */
+#define USB_HOST_HSOFC_FLENCE (0x1ul << USB_HOST_HSOFC_FLENCE_Pos)
+#define USB_HOST_HSOFC_MASK 0x8Ful /**< \brief (USB_HOST_HSOFC) MASK Register */
+
+/* -------- USB_DEVICE_STATUS : (USB Offset: 0x00C) (R/ 8) DEVICE DEVICE Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t :2; /*!< bit: 0.. 1 Reserved */
+ uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */
+ uint8_t :2; /*!< bit: 4.. 5 Reserved */
+ uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_STATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_STATUS_OFFSET 0x00C /**< \brief (USB_DEVICE_STATUS offset) DEVICE Status */
+#define USB_DEVICE_STATUS_RESETVALUE 0x40ul /**< \brief (USB_DEVICE_STATUS reset_value) DEVICE Status */
+
+#define USB_DEVICE_STATUS_SPEED_Pos 2 /**< \brief (USB_DEVICE_STATUS) Speed Status */
+#define USB_DEVICE_STATUS_SPEED_Msk (0x3ul << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED(value) ((USB_DEVICE_STATUS_SPEED_Msk & ((value) << USB_DEVICE_STATUS_SPEED_Pos)))
+#define USB_DEVICE_STATUS_SPEED_FS_Val 0x0ul /**< \brief (USB_DEVICE_STATUS) Full-speed mode */
+#define USB_DEVICE_STATUS_SPEED_HS_Val 0x1ul /**< \brief (USB_DEVICE_STATUS) High-speed mode */
+#define USB_DEVICE_STATUS_SPEED_LS_Val 0x2ul /**< \brief (USB_DEVICE_STATUS) Low-speed mode */
+#define USB_DEVICE_STATUS_SPEED_FS (USB_DEVICE_STATUS_SPEED_FS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED_HS (USB_DEVICE_STATUS_SPEED_HS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_SPEED_LS (USB_DEVICE_STATUS_SPEED_LS_Val << USB_DEVICE_STATUS_SPEED_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_Pos 6 /**< \brief (USB_DEVICE_STATUS) USB Line State Status */
+#define USB_DEVICE_STATUS_LINESTATE_Msk (0x3ul << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE(value) ((USB_DEVICE_STATUS_LINESTATE_Msk & ((value) << USB_DEVICE_STATUS_LINESTATE_Pos)))
+#define USB_DEVICE_STATUS_LINESTATE_0_Val 0x0ul /**< \brief (USB_DEVICE_STATUS) SE0/RESET */
+#define USB_DEVICE_STATUS_LINESTATE_1_Val 0x1ul /**< \brief (USB_DEVICE_STATUS) FS-J or LS-K State */
+#define USB_DEVICE_STATUS_LINESTATE_2_Val 0x2ul /**< \brief (USB_DEVICE_STATUS) FS-K or LS-J State */
+#define USB_DEVICE_STATUS_LINESTATE_0 (USB_DEVICE_STATUS_LINESTATE_0_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_1 (USB_DEVICE_STATUS_LINESTATE_1_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_LINESTATE_2 (USB_DEVICE_STATUS_LINESTATE_2_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
+#define USB_DEVICE_STATUS_MASK 0xCCul /**< \brief (USB_DEVICE_STATUS) MASK Register */
+
+/* -------- USB_HOST_STATUS : (USB Offset: 0x00C) (R/W 8) HOST HOST Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t :2; /*!< bit: 0.. 1 Reserved */
+ uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */
+ uint8_t :2; /*!< bit: 4.. 5 Reserved */
+ uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_STATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_STATUS_OFFSET 0x00C /**< \brief (USB_HOST_STATUS offset) HOST Status */
+#define USB_HOST_STATUS_RESETVALUE 0x00ul /**< \brief (USB_HOST_STATUS reset_value) HOST Status */
+
+#define USB_HOST_STATUS_SPEED_Pos 2 /**< \brief (USB_HOST_STATUS) Speed Status */
+#define USB_HOST_STATUS_SPEED_Msk (0x3ul << USB_HOST_STATUS_SPEED_Pos)
+#define USB_HOST_STATUS_SPEED(value) ((USB_HOST_STATUS_SPEED_Msk & ((value) << USB_HOST_STATUS_SPEED_Pos)))
+#define USB_HOST_STATUS_LINESTATE_Pos 6 /**< \brief (USB_HOST_STATUS) USB Line State Status */
+#define USB_HOST_STATUS_LINESTATE_Msk (0x3ul << USB_HOST_STATUS_LINESTATE_Pos)
+#define USB_HOST_STATUS_LINESTATE(value) ((USB_HOST_STATUS_LINESTATE_Msk & ((value) << USB_HOST_STATUS_LINESTATE_Pos)))
+#define USB_HOST_STATUS_MASK 0xCCul /**< \brief (USB_HOST_STATUS) MASK Register */
+
+/* -------- USB_FSMSTATUS : (USB Offset: 0x00D) (R/ 8) Finite State Machine Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t FSMSTATE:6; /*!< bit: 0.. 5 Fine State Machine Status */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_FSMSTATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_FSMSTATUS_OFFSET 0x00D /**< \brief (USB_FSMSTATUS offset) Finite State Machine Status */
+#define USB_FSMSTATUS_RESETVALUE 0x01ul /**< \brief (USB_FSMSTATUS reset_value) Finite State Machine Status */
+
+#define USB_FSMSTATUS_FSMSTATE_Pos 0 /**< \brief (USB_FSMSTATUS) Fine State Machine Status */
+#define USB_FSMSTATUS_FSMSTATE_Msk (0x3Ful << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE(value) ((USB_FSMSTATUS_FSMSTATE_Msk & ((value) << USB_FSMSTATUS_FSMSTATE_Pos)))
+#define USB_FSMSTATUS_FSMSTATE_OFF_Val 0x1ul /**< \brief (USB_FSMSTATUS) OFF (L3). It corresponds to the powered-off, disconnected, and disabled state */
+#define USB_FSMSTATUS_FSMSTATE_ON_Val 0x2ul /**< \brief (USB_FSMSTATUS) ON (L0). It corresponds to the Idle and Active states */
+#define USB_FSMSTATUS_FSMSTATE_SUSPEND_Val 0x4ul /**< \brief (USB_FSMSTATUS) SUSPEND (L2) */
+#define USB_FSMSTATUS_FSMSTATE_SLEEP_Val 0x8ul /**< \brief (USB_FSMSTATUS) SLEEP (L1) */
+#define USB_FSMSTATUS_FSMSTATE_DNRESUME_Val 0x10ul /**< \brief (USB_FSMSTATUS) DNRESUME. Down Stream Resume. */
+#define USB_FSMSTATUS_FSMSTATE_UPRESUME_Val 0x20ul /**< \brief (USB_FSMSTATUS) UPRESUME. Up Stream Resume. */
+#define USB_FSMSTATUS_FSMSTATE_RESET_Val 0x40ul /**< \brief (USB_FSMSTATUS) RESET. USB lines Reset. */
+#define USB_FSMSTATUS_FSMSTATE_OFF (USB_FSMSTATUS_FSMSTATE_OFF_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_ON (USB_FSMSTATUS_FSMSTATE_ON_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_SUSPEND (USB_FSMSTATUS_FSMSTATE_SUSPEND_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_SLEEP (USB_FSMSTATUS_FSMSTATE_SLEEP_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_DNRESUME (USB_FSMSTATUS_FSMSTATE_DNRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_UPRESUME (USB_FSMSTATUS_FSMSTATE_UPRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_FSMSTATE_RESET (USB_FSMSTATUS_FSMSTATE_RESET_Val << USB_FSMSTATUS_FSMSTATE_Pos)
+#define USB_FSMSTATUS_MASK 0x3Ful /**< \brief (USB_FSMSTATUS) MASK Register */
+
+/* -------- USB_DEVICE_FNUM : (USB Offset: 0x010) (R/ 16) DEVICE DEVICE Device Frame Number -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */
+ uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */
+ uint16_t :1; /*!< bit: 14 Reserved */
+ uint16_t FNCERR:1; /*!< bit: 15 Frame Number CRC Error */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_FNUM_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_FNUM_OFFSET 0x010 /**< \brief (USB_DEVICE_FNUM offset) DEVICE Device Frame Number */
+#define USB_DEVICE_FNUM_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_FNUM reset_value) DEVICE Device Frame Number */
+
+#define USB_DEVICE_FNUM_MFNUM_Pos 0 /**< \brief (USB_DEVICE_FNUM) Micro Frame Number */
+#define USB_DEVICE_FNUM_MFNUM_Msk (0x7ul << USB_DEVICE_FNUM_MFNUM_Pos)
+#define USB_DEVICE_FNUM_MFNUM(value) ((USB_DEVICE_FNUM_MFNUM_Msk & ((value) << USB_DEVICE_FNUM_MFNUM_Pos)))
+#define USB_DEVICE_FNUM_FNUM_Pos 3 /**< \brief (USB_DEVICE_FNUM) Frame Number */
+#define USB_DEVICE_FNUM_FNUM_Msk (0x7FFul << USB_DEVICE_FNUM_FNUM_Pos)
+#define USB_DEVICE_FNUM_FNUM(value) ((USB_DEVICE_FNUM_FNUM_Msk & ((value) << USB_DEVICE_FNUM_FNUM_Pos)))
+#define USB_DEVICE_FNUM_FNCERR_Pos 15 /**< \brief (USB_DEVICE_FNUM) Frame Number CRC Error */
+#define USB_DEVICE_FNUM_FNCERR (0x1ul << USB_DEVICE_FNUM_FNCERR_Pos)
+#define USB_DEVICE_FNUM_MASK 0xBFFFul /**< \brief (USB_DEVICE_FNUM) MASK Register */
+
+/* -------- USB_HOST_FNUM : (USB Offset: 0x010) (R/W 16) HOST HOST Host Frame Number -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */
+ uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */
+ uint16_t :2; /*!< bit: 14..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_FNUM_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_FNUM_OFFSET 0x010 /**< \brief (USB_HOST_FNUM offset) HOST Host Frame Number */
+#define USB_HOST_FNUM_RESETVALUE 0x0000ul /**< \brief (USB_HOST_FNUM reset_value) HOST Host Frame Number */
+
+#define USB_HOST_FNUM_MFNUM_Pos 0 /**< \brief (USB_HOST_FNUM) Micro Frame Number */
+#define USB_HOST_FNUM_MFNUM_Msk (0x7ul << USB_HOST_FNUM_MFNUM_Pos)
+#define USB_HOST_FNUM_MFNUM(value) ((USB_HOST_FNUM_MFNUM_Msk & ((value) << USB_HOST_FNUM_MFNUM_Pos)))
+#define USB_HOST_FNUM_FNUM_Pos 3 /**< \brief (USB_HOST_FNUM) Frame Number */
+#define USB_HOST_FNUM_FNUM_Msk (0x7FFul << USB_HOST_FNUM_FNUM_Pos)
+#define USB_HOST_FNUM_FNUM(value) ((USB_HOST_FNUM_FNUM_Msk & ((value) << USB_HOST_FNUM_FNUM_Pos)))
+#define USB_HOST_FNUM_MASK 0x3FFFul /**< \brief (USB_HOST_FNUM) MASK Register */
+
+/* -------- USB_HOST_FLENHIGH : (USB Offset: 0x012) (R/ 8) HOST HOST Host Frame Length -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t FLENHIGH:8; /*!< bit: 0.. 7 Frame Length */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_FLENHIGH_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_FLENHIGH_OFFSET 0x012 /**< \brief (USB_HOST_FLENHIGH offset) HOST Host Frame Length */
+#define USB_HOST_FLENHIGH_RESETVALUE 0x00ul /**< \brief (USB_HOST_FLENHIGH reset_value) HOST Host Frame Length */
+
+#define USB_HOST_FLENHIGH_FLENHIGH_Pos 0 /**< \brief (USB_HOST_FLENHIGH) Frame Length */
+#define USB_HOST_FLENHIGH_FLENHIGH_Msk (0xFFul << USB_HOST_FLENHIGH_FLENHIGH_Pos)
+#define USB_HOST_FLENHIGH_FLENHIGH(value) ((USB_HOST_FLENHIGH_FLENHIGH_Msk & ((value) << USB_HOST_FLENHIGH_FLENHIGH_Pos)))
+#define USB_HOST_FLENHIGH_MASK 0xFFul /**< \brief (USB_HOST_FLENHIGH) MASK Register */
+
+/* -------- USB_DEVICE_INTENCLR : (USB Offset: 0x014) (R/W 16) DEVICE DEVICE Device Interrupt Enable Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
+ uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
+ uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
+ uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
+ uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
+ uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
+ uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_INTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_INTENCLR_OFFSET 0x014 /**< \brief (USB_DEVICE_INTENCLR offset) DEVICE Device Interrupt Enable Clear */
+#define USB_DEVICE_INTENCLR_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTENCLR reset_value) DEVICE Device Interrupt Enable Clear */
+
+#define USB_DEVICE_INTENCLR_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENCLR) Suspend Interrupt Enable */
+#define USB_DEVICE_INTENCLR_SUSPEND (0x1ul << USB_DEVICE_INTENCLR_SUSPEND_Pos)
+#define USB_DEVICE_INTENCLR_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENCLR) Micro Start of Frame Interrupt Enable in High Speed Mode */
+#define USB_DEVICE_INTENCLR_MSOF (0x1ul << USB_DEVICE_INTENCLR_MSOF_Pos)
+#define USB_DEVICE_INTENCLR_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENCLR) Start Of Frame Interrupt Enable */
+#define USB_DEVICE_INTENCLR_SOF (0x1ul << USB_DEVICE_INTENCLR_SOF_Pos)
+#define USB_DEVICE_INTENCLR_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENCLR) End of Reset Interrupt Enable */
+#define USB_DEVICE_INTENCLR_EORST (0x1ul << USB_DEVICE_INTENCLR_EORST_Pos)
+#define USB_DEVICE_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENCLR) Wake Up Interrupt Enable */
+#define USB_DEVICE_INTENCLR_WAKEUP (0x1ul << USB_DEVICE_INTENCLR_WAKEUP_Pos)
+#define USB_DEVICE_INTENCLR_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENCLR) End Of Resume Interrupt Enable */
+#define USB_DEVICE_INTENCLR_EORSM (0x1ul << USB_DEVICE_INTENCLR_EORSM_Pos)
+#define USB_DEVICE_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENCLR) Upstream Resume Interrupt Enable */
+#define USB_DEVICE_INTENCLR_UPRSM (0x1ul << USB_DEVICE_INTENCLR_UPRSM_Pos)
+#define USB_DEVICE_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENCLR) Ram Access Interrupt Enable */
+#define USB_DEVICE_INTENCLR_RAMACER (0x1ul << USB_DEVICE_INTENCLR_RAMACER_Pos)
+#define USB_DEVICE_INTENCLR_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Not Yet Interrupt Enable */
+#define USB_DEVICE_INTENCLR_LPMNYET (0x1ul << USB_DEVICE_INTENCLR_LPMNYET_Pos)
+#define USB_DEVICE_INTENCLR_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Suspend Interrupt Enable */
+#define USB_DEVICE_INTENCLR_LPMSUSP (0x1ul << USB_DEVICE_INTENCLR_LPMSUSP_Pos)
+#define USB_DEVICE_INTENCLR_MASK 0x03FFul /**< \brief (USB_DEVICE_INTENCLR) MASK Register */
+
+/* -------- USB_HOST_INTENCLR : (USB Offset: 0x014) (R/W 16) HOST HOST Host Interrupt Enable Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t :2; /*!< bit: 0.. 1 Reserved */
+ uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame Interrupt Disable */
+ uint16_t RST:1; /*!< bit: 3 BUS Reset Interrupt Disable */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Disable */
+ uint16_t DNRSM:1; /*!< bit: 5 DownStream to Device Interrupt Disable */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume from Device Interrupt Disable */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Disable */
+ uint16_t DCONN:1; /*!< bit: 8 Device Connection Interrupt Disable */
+ uint16_t DDISC:1; /*!< bit: 9 Device Disconnection Interrupt Disable */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_INTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_INTENCLR_OFFSET 0x014 /**< \brief (USB_HOST_INTENCLR offset) HOST Host Interrupt Enable Clear */
+#define USB_HOST_INTENCLR_RESETVALUE 0x0000ul /**< \brief (USB_HOST_INTENCLR reset_value) HOST Host Interrupt Enable Clear */
+
+#define USB_HOST_INTENCLR_HSOF_Pos 2 /**< \brief (USB_HOST_INTENCLR) Host Start Of Frame Interrupt Disable */
+#define USB_HOST_INTENCLR_HSOF (0x1ul << USB_HOST_INTENCLR_HSOF_Pos)
+#define USB_HOST_INTENCLR_RST_Pos 3 /**< \brief (USB_HOST_INTENCLR) BUS Reset Interrupt Disable */
+#define USB_HOST_INTENCLR_RST (0x1ul << USB_HOST_INTENCLR_RST_Pos)
+#define USB_HOST_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTENCLR) Wake Up Interrupt Disable */
+#define USB_HOST_INTENCLR_WAKEUP (0x1ul << USB_HOST_INTENCLR_WAKEUP_Pos)
+#define USB_HOST_INTENCLR_DNRSM_Pos 5 /**< \brief (USB_HOST_INTENCLR) DownStream to Device Interrupt Disable */
+#define USB_HOST_INTENCLR_DNRSM (0x1ul << USB_HOST_INTENCLR_DNRSM_Pos)
+#define USB_HOST_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_HOST_INTENCLR) Upstream Resume from Device Interrupt Disable */
+#define USB_HOST_INTENCLR_UPRSM (0x1ul << USB_HOST_INTENCLR_UPRSM_Pos)
+#define USB_HOST_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_HOST_INTENCLR) Ram Access Interrupt Disable */
+#define USB_HOST_INTENCLR_RAMACER (0x1ul << USB_HOST_INTENCLR_RAMACER_Pos)
+#define USB_HOST_INTENCLR_DCONN_Pos 8 /**< \brief (USB_HOST_INTENCLR) Device Connection Interrupt Disable */
+#define USB_HOST_INTENCLR_DCONN (0x1ul << USB_HOST_INTENCLR_DCONN_Pos)
+#define USB_HOST_INTENCLR_DDISC_Pos 9 /**< \brief (USB_HOST_INTENCLR) Device Disconnection Interrupt Disable */
+#define USB_HOST_INTENCLR_DDISC (0x1ul << USB_HOST_INTENCLR_DDISC_Pos)
+#define USB_HOST_INTENCLR_MASK 0x03FCul /**< \brief (USB_HOST_INTENCLR) MASK Register */
+
+/* -------- USB_DEVICE_INTENSET : (USB Offset: 0x018) (R/W 16) DEVICE DEVICE Device Interrupt Enable Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
+ uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
+ uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
+ uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
+ uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
+ uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
+ uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_INTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_INTENSET_OFFSET 0x018 /**< \brief (USB_DEVICE_INTENSET offset) DEVICE Device Interrupt Enable Set */
+#define USB_DEVICE_INTENSET_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTENSET reset_value) DEVICE Device Interrupt Enable Set */
+
+#define USB_DEVICE_INTENSET_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENSET) Suspend Interrupt Enable */
+#define USB_DEVICE_INTENSET_SUSPEND (0x1ul << USB_DEVICE_INTENSET_SUSPEND_Pos)
+#define USB_DEVICE_INTENSET_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENSET) Micro Start of Frame Interrupt Enable in High Speed Mode */
+#define USB_DEVICE_INTENSET_MSOF (0x1ul << USB_DEVICE_INTENSET_MSOF_Pos)
+#define USB_DEVICE_INTENSET_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENSET) Start Of Frame Interrupt Enable */
+#define USB_DEVICE_INTENSET_SOF (0x1ul << USB_DEVICE_INTENSET_SOF_Pos)
+#define USB_DEVICE_INTENSET_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENSET) End of Reset Interrupt Enable */
+#define USB_DEVICE_INTENSET_EORST (0x1ul << USB_DEVICE_INTENSET_EORST_Pos)
+#define USB_DEVICE_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENSET) Wake Up Interrupt Enable */
+#define USB_DEVICE_INTENSET_WAKEUP (0x1ul << USB_DEVICE_INTENSET_WAKEUP_Pos)
+#define USB_DEVICE_INTENSET_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENSET) End Of Resume Interrupt Enable */
+#define USB_DEVICE_INTENSET_EORSM (0x1ul << USB_DEVICE_INTENSET_EORSM_Pos)
+#define USB_DEVICE_INTENSET_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENSET) Upstream Resume Interrupt Enable */
+#define USB_DEVICE_INTENSET_UPRSM (0x1ul << USB_DEVICE_INTENSET_UPRSM_Pos)
+#define USB_DEVICE_INTENSET_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENSET) Ram Access Interrupt Enable */
+#define USB_DEVICE_INTENSET_RAMACER (0x1ul << USB_DEVICE_INTENSET_RAMACER_Pos)
+#define USB_DEVICE_INTENSET_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Not Yet Interrupt Enable */
+#define USB_DEVICE_INTENSET_LPMNYET (0x1ul << USB_DEVICE_INTENSET_LPMNYET_Pos)
+#define USB_DEVICE_INTENSET_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Suspend Interrupt Enable */
+#define USB_DEVICE_INTENSET_LPMSUSP (0x1ul << USB_DEVICE_INTENSET_LPMSUSP_Pos)
+#define USB_DEVICE_INTENSET_MASK 0x03FFul /**< \brief (USB_DEVICE_INTENSET) MASK Register */
+
+/* -------- USB_HOST_INTENSET : (USB Offset: 0x018) (R/W 16) HOST HOST Host Interrupt Enable Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t :2; /*!< bit: 0.. 1 Reserved */
+ uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame Interrupt Enable */
+ uint16_t RST:1; /*!< bit: 3 Bus Reset Interrupt Enable */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
+ uint16_t DNRSM:1; /*!< bit: 5 DownStream to the Device Interrupt Enable */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume fromthe device Interrupt Enable */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
+ uint16_t DCONN:1; /*!< bit: 8 Link Power Management Interrupt Enable */
+ uint16_t DDISC:1; /*!< bit: 9 Device Disconnection Interrupt Enable */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_INTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_INTENSET_OFFSET 0x018 /**< \brief (USB_HOST_INTENSET offset) HOST Host Interrupt Enable Set */
+#define USB_HOST_INTENSET_RESETVALUE 0x0000ul /**< \brief (USB_HOST_INTENSET reset_value) HOST Host Interrupt Enable Set */
+
+#define USB_HOST_INTENSET_HSOF_Pos 2 /**< \brief (USB_HOST_INTENSET) Host Start Of Frame Interrupt Enable */
+#define USB_HOST_INTENSET_HSOF (0x1ul << USB_HOST_INTENSET_HSOF_Pos)
+#define USB_HOST_INTENSET_RST_Pos 3 /**< \brief (USB_HOST_INTENSET) Bus Reset Interrupt Enable */
+#define USB_HOST_INTENSET_RST (0x1ul << USB_HOST_INTENSET_RST_Pos)
+#define USB_HOST_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTENSET) Wake Up Interrupt Enable */
+#define USB_HOST_INTENSET_WAKEUP (0x1ul << USB_HOST_INTENSET_WAKEUP_Pos)
+#define USB_HOST_INTENSET_DNRSM_Pos 5 /**< \brief (USB_HOST_INTENSET) DownStream to the Device Interrupt Enable */
+#define USB_HOST_INTENSET_DNRSM (0x1ul << USB_HOST_INTENSET_DNRSM_Pos)
+#define USB_HOST_INTENSET_UPRSM_Pos 6 /**< \brief (USB_HOST_INTENSET) Upstream Resume fromthe device Interrupt Enable */
+#define USB_HOST_INTENSET_UPRSM (0x1ul << USB_HOST_INTENSET_UPRSM_Pos)
+#define USB_HOST_INTENSET_RAMACER_Pos 7 /**< \brief (USB_HOST_INTENSET) Ram Access Interrupt Enable */
+#define USB_HOST_INTENSET_RAMACER (0x1ul << USB_HOST_INTENSET_RAMACER_Pos)
+#define USB_HOST_INTENSET_DCONN_Pos 8 /**< \brief (USB_HOST_INTENSET) Link Power Management Interrupt Enable */
+#define USB_HOST_INTENSET_DCONN (0x1ul << USB_HOST_INTENSET_DCONN_Pos)
+#define USB_HOST_INTENSET_DDISC_Pos 9 /**< \brief (USB_HOST_INTENSET) Device Disconnection Interrupt Enable */
+#define USB_HOST_INTENSET_DDISC (0x1ul << USB_HOST_INTENSET_DDISC_Pos)
+#define USB_HOST_INTENSET_MASK 0x03FCul /**< \brief (USB_HOST_INTENSET) MASK Register */
+
+/* -------- USB_DEVICE_INTFLAG : (USB Offset: 0x01C) (R/W 16) DEVICE DEVICE Device Interrupt Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t SUSPEND:1; /*!< bit: 0 Suspend */
+ uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame in High Speed Mode */
+ uint16_t SOF:1; /*!< bit: 2 Start Of Frame */
+ uint16_t EORST:1; /*!< bit: 3 End of Reset */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */
+ uint16_t EORSM:1; /*!< bit: 5 End Of Resume */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access */
+ uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet */
+ uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_INTFLAG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_INTFLAG_OFFSET 0x01C /**< \brief (USB_DEVICE_INTFLAG offset) DEVICE Device Interrupt Flag */
+#define USB_DEVICE_INTFLAG_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_INTFLAG reset_value) DEVICE Device Interrupt Flag */
+
+#define USB_DEVICE_INTFLAG_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTFLAG) Suspend */
+#define USB_DEVICE_INTFLAG_SUSPEND (0x1ul << USB_DEVICE_INTFLAG_SUSPEND_Pos)
+#define USB_DEVICE_INTFLAG_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTFLAG) Micro Start of Frame in High Speed Mode */
+#define USB_DEVICE_INTFLAG_MSOF (0x1ul << USB_DEVICE_INTFLAG_MSOF_Pos)
+#define USB_DEVICE_INTFLAG_SOF_Pos 2 /**< \brief (USB_DEVICE_INTFLAG) Start Of Frame */
+#define USB_DEVICE_INTFLAG_SOF (0x1ul << USB_DEVICE_INTFLAG_SOF_Pos)
+#define USB_DEVICE_INTFLAG_EORST_Pos 3 /**< \brief (USB_DEVICE_INTFLAG) End of Reset */
+#define USB_DEVICE_INTFLAG_EORST (0x1ul << USB_DEVICE_INTFLAG_EORST_Pos)
+#define USB_DEVICE_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTFLAG) Wake Up */
+#define USB_DEVICE_INTFLAG_WAKEUP (0x1ul << USB_DEVICE_INTFLAG_WAKEUP_Pos)
+#define USB_DEVICE_INTFLAG_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTFLAG) End Of Resume */
+#define USB_DEVICE_INTFLAG_EORSM (0x1ul << USB_DEVICE_INTFLAG_EORSM_Pos)
+#define USB_DEVICE_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTFLAG) Upstream Resume */
+#define USB_DEVICE_INTFLAG_UPRSM (0x1ul << USB_DEVICE_INTFLAG_UPRSM_Pos)
+#define USB_DEVICE_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTFLAG) Ram Access */
+#define USB_DEVICE_INTFLAG_RAMACER (0x1ul << USB_DEVICE_INTFLAG_RAMACER_Pos)
+#define USB_DEVICE_INTFLAG_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Not Yet */
+#define USB_DEVICE_INTFLAG_LPMNYET (0x1ul << USB_DEVICE_INTFLAG_LPMNYET_Pos)
+#define USB_DEVICE_INTFLAG_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Suspend */
+#define USB_DEVICE_INTFLAG_LPMSUSP (0x1ul << USB_DEVICE_INTFLAG_LPMSUSP_Pos)
+#define USB_DEVICE_INTFLAG_MASK 0x03FFul /**< \brief (USB_DEVICE_INTFLAG) MASK Register */
+
+/* -------- USB_HOST_INTFLAG : (USB Offset: 0x01C) (R/W 16) HOST HOST Host Interrupt Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t :2; /*!< bit: 0.. 1 Reserved */
+ uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame */
+ uint16_t RST:1; /*!< bit: 3 Bus Reset */
+ uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */
+ uint16_t DNRSM:1; /*!< bit: 5 Downstream */
+ uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume from the Device */
+ uint16_t RAMACER:1; /*!< bit: 7 Ram Access */
+ uint16_t DCONN:1; /*!< bit: 8 Device Connection */
+ uint16_t DDISC:1; /*!< bit: 9 Device Disconnection */
+ uint16_t :6; /*!< bit: 10..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_INTFLAG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_INTFLAG_OFFSET 0x01C /**< \brief (USB_HOST_INTFLAG offset) HOST Host Interrupt Flag */
+#define USB_HOST_INTFLAG_RESETVALUE 0x0000ul /**< \brief (USB_HOST_INTFLAG reset_value) HOST Host Interrupt Flag */
+
+#define USB_HOST_INTFLAG_HSOF_Pos 2 /**< \brief (USB_HOST_INTFLAG) Host Start Of Frame */
+#define USB_HOST_INTFLAG_HSOF (0x1ul << USB_HOST_INTFLAG_HSOF_Pos)
+#define USB_HOST_INTFLAG_RST_Pos 3 /**< \brief (USB_HOST_INTFLAG) Bus Reset */
+#define USB_HOST_INTFLAG_RST (0x1ul << USB_HOST_INTFLAG_RST_Pos)
+#define USB_HOST_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTFLAG) Wake Up */
+#define USB_HOST_INTFLAG_WAKEUP (0x1ul << USB_HOST_INTFLAG_WAKEUP_Pos)
+#define USB_HOST_INTFLAG_DNRSM_Pos 5 /**< \brief (USB_HOST_INTFLAG) Downstream */
+#define USB_HOST_INTFLAG_DNRSM (0x1ul << USB_HOST_INTFLAG_DNRSM_Pos)
+#define USB_HOST_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_HOST_INTFLAG) Upstream Resume from the Device */
+#define USB_HOST_INTFLAG_UPRSM (0x1ul << USB_HOST_INTFLAG_UPRSM_Pos)
+#define USB_HOST_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_HOST_INTFLAG) Ram Access */
+#define USB_HOST_INTFLAG_RAMACER (0x1ul << USB_HOST_INTFLAG_RAMACER_Pos)
+#define USB_HOST_INTFLAG_DCONN_Pos 8 /**< \brief (USB_HOST_INTFLAG) Device Connection */
+#define USB_HOST_INTFLAG_DCONN (0x1ul << USB_HOST_INTFLAG_DCONN_Pos)
+#define USB_HOST_INTFLAG_DDISC_Pos 9 /**< \brief (USB_HOST_INTFLAG) Device Disconnection */
+#define USB_HOST_INTFLAG_DDISC (0x1ul << USB_HOST_INTFLAG_DDISC_Pos)
+#define USB_HOST_INTFLAG_MASK 0x03FCul /**< \brief (USB_HOST_INTFLAG) MASK Register */
+
+/* -------- USB_DEVICE_EPINTSMRY : (USB Offset: 0x020) (R/ 16) DEVICE DEVICE End Point Interrupt Summary -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t EPINT0:1; /*!< bit: 0 End Point 0 Interrupt */
+ uint16_t EPINT1:1; /*!< bit: 1 End Point 1 Interrupt */
+ uint16_t EPINT2:1; /*!< bit: 2 End Point 2 Interrupt */
+ uint16_t EPINT3:1; /*!< bit: 3 End Point 3 Interrupt */
+ uint16_t EPINT4:1; /*!< bit: 4 End Point 4 Interrupt */
+ uint16_t EPINT5:1; /*!< bit: 5 End Point 5 Interrupt */
+ uint16_t EPINT6:1; /*!< bit: 6 End Point 6 Interrupt */
+ uint16_t EPINT7:1; /*!< bit: 7 End Point 7 Interrupt */
+ uint16_t :8; /*!< bit: 8..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint16_t EPINT:8; /*!< bit: 0.. 7 End Point x Interrupt */
+ uint16_t :8; /*!< bit: 8..15 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPINTSMRY_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPINTSMRY_OFFSET 0x020 /**< \brief (USB_DEVICE_EPINTSMRY offset) DEVICE End Point Interrupt Summary */
+#define USB_DEVICE_EPINTSMRY_RESETVALUE 0x0000ul /**< \brief (USB_DEVICE_EPINTSMRY reset_value) DEVICE End Point Interrupt Summary */
+
+#define USB_DEVICE_EPINTSMRY_EPINT0_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 0 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT0 (1 << USB_DEVICE_EPINTSMRY_EPINT0_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT1_Pos 1 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 1 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT1 (1 << USB_DEVICE_EPINTSMRY_EPINT1_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT2_Pos 2 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 2 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT2 (1 << USB_DEVICE_EPINTSMRY_EPINT2_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT3_Pos 3 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 3 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT3 (1 << USB_DEVICE_EPINTSMRY_EPINT3_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT4_Pos 4 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 4 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT4 (1 << USB_DEVICE_EPINTSMRY_EPINT4_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT5_Pos 5 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 5 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT5 (1 << USB_DEVICE_EPINTSMRY_EPINT5_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT6_Pos 6 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 6 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT6 (1 << USB_DEVICE_EPINTSMRY_EPINT6_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT7_Pos 7 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 7 Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT7 (1 << USB_DEVICE_EPINTSMRY_EPINT7_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point x Interrupt */
+#define USB_DEVICE_EPINTSMRY_EPINT_Msk (0xFFul << USB_DEVICE_EPINTSMRY_EPINT_Pos)
+#define USB_DEVICE_EPINTSMRY_EPINT(value) ((USB_DEVICE_EPINTSMRY_EPINT_Msk & ((value) << USB_DEVICE_EPINTSMRY_EPINT_Pos)))
+#define USB_DEVICE_EPINTSMRY_MASK 0x00FFul /**< \brief (USB_DEVICE_EPINTSMRY) MASK Register */
+
+/* -------- USB_HOST_PINTSMRY : (USB Offset: 0x020) (R/ 16) HOST HOST Pipe Interrupt Summary -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t EPINT0:1; /*!< bit: 0 Pipe 0 Interrupt */
+ uint16_t EPINT1:1; /*!< bit: 1 Pipe 1 Interrupt */
+ uint16_t EPINT2:1; /*!< bit: 2 Pipe 2 Interrupt */
+ uint16_t EPINT3:1; /*!< bit: 3 Pipe 3 Interrupt */
+ uint16_t EPINT4:1; /*!< bit: 4 Pipe 4 Interrupt */
+ uint16_t EPINT5:1; /*!< bit: 5 Pipe 5 Interrupt */
+ uint16_t EPINT6:1; /*!< bit: 6 Pipe 6 Interrupt */
+ uint16_t EPINT7:1; /*!< bit: 7 Pipe 7 Interrupt */
+ uint16_t :8; /*!< bit: 8..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint16_t EPINT:8; /*!< bit: 0.. 7 Pipe x Interrupt */
+ uint16_t :8; /*!< bit: 8..15 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_PINTSMRY_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PINTSMRY_OFFSET 0x020 /**< \brief (USB_HOST_PINTSMRY offset) HOST Pipe Interrupt Summary */
+#define USB_HOST_PINTSMRY_RESETVALUE 0x0000ul /**< \brief (USB_HOST_PINTSMRY reset_value) HOST Pipe Interrupt Summary */
+
+#define USB_HOST_PINTSMRY_EPINT0_Pos 0 /**< \brief (USB_HOST_PINTSMRY) Pipe 0 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT0 (1 << USB_HOST_PINTSMRY_EPINT0_Pos)
+#define USB_HOST_PINTSMRY_EPINT1_Pos 1 /**< \brief (USB_HOST_PINTSMRY) Pipe 1 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT1 (1 << USB_HOST_PINTSMRY_EPINT1_Pos)
+#define USB_HOST_PINTSMRY_EPINT2_Pos 2 /**< \brief (USB_HOST_PINTSMRY) Pipe 2 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT2 (1 << USB_HOST_PINTSMRY_EPINT2_Pos)
+#define USB_HOST_PINTSMRY_EPINT3_Pos 3 /**< \brief (USB_HOST_PINTSMRY) Pipe 3 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT3 (1 << USB_HOST_PINTSMRY_EPINT3_Pos)
+#define USB_HOST_PINTSMRY_EPINT4_Pos 4 /**< \brief (USB_HOST_PINTSMRY) Pipe 4 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT4 (1 << USB_HOST_PINTSMRY_EPINT4_Pos)
+#define USB_HOST_PINTSMRY_EPINT5_Pos 5 /**< \brief (USB_HOST_PINTSMRY) Pipe 5 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT5 (1 << USB_HOST_PINTSMRY_EPINT5_Pos)
+#define USB_HOST_PINTSMRY_EPINT6_Pos 6 /**< \brief (USB_HOST_PINTSMRY) Pipe 6 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT6 (1 << USB_HOST_PINTSMRY_EPINT6_Pos)
+#define USB_HOST_PINTSMRY_EPINT7_Pos 7 /**< \brief (USB_HOST_PINTSMRY) Pipe 7 Interrupt */
+#define USB_HOST_PINTSMRY_EPINT7 (1 << USB_HOST_PINTSMRY_EPINT7_Pos)
+#define USB_HOST_PINTSMRY_EPINT_Pos 0 /**< \brief (USB_HOST_PINTSMRY) Pipe x Interrupt */
+#define USB_HOST_PINTSMRY_EPINT_Msk (0xFFul << USB_HOST_PINTSMRY_EPINT_Pos)
+#define USB_HOST_PINTSMRY_EPINT(value) ((USB_HOST_PINTSMRY_EPINT_Msk & ((value) << USB_HOST_PINTSMRY_EPINT_Pos)))
+#define USB_HOST_PINTSMRY_MASK 0x00FFul /**< \brief (USB_HOST_PINTSMRY) MASK Register */
+
+/* -------- USB_DESCADD : (USB Offset: 0x024) (R/W 32) Descriptor Address -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint32_t DESCADD:32; /*!< bit: 0..31 Descriptor Address Value */
+ } bit; /*!< Structure used for bit access */
+ uint32_t reg; /*!< Type used for register access */
+} USB_DESCADD_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DESCADD_OFFSET 0x024 /**< \brief (USB_DESCADD offset) Descriptor Address */
+#define USB_DESCADD_RESETVALUE 0x00000000ul /**< \brief (USB_DESCADD reset_value) Descriptor Address */
+
+#define USB_DESCADD_DESCADD_Pos 0 /**< \brief (USB_DESCADD) Descriptor Address Value */
+#define USB_DESCADD_DESCADD_Msk (0xFFFFFFFFul << USB_DESCADD_DESCADD_Pos)
+#define USB_DESCADD_DESCADD(value) ((USB_DESCADD_DESCADD_Msk & ((value) << USB_DESCADD_DESCADD_Pos)))
+#define USB_DESCADD_MASK 0xFFFFFFFFul /**< \brief (USB_DESCADD) MASK Register */
+
+/* -------- USB_PADCAL : (USB Offset: 0x028) (R/W 16) USB PAD Calibration -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t TRANSP:5; /*!< bit: 0.. 4 USB Pad Transp calibration */
+ uint16_t :1; /*!< bit: 5 Reserved */
+ uint16_t TRANSN:5; /*!< bit: 6..10 USB Pad Transn calibration */
+ uint16_t :1; /*!< bit: 11 Reserved */
+ uint16_t TRIM:3; /*!< bit: 12..14 USB Pad Trim calibration */
+ uint16_t :1; /*!< bit: 15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_PADCAL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_PADCAL_OFFSET 0x028 /**< \brief (USB_PADCAL offset) USB PAD Calibration */
+#define USB_PADCAL_RESETVALUE 0x0000ul /**< \brief (USB_PADCAL reset_value) USB PAD Calibration */
+
+#define USB_PADCAL_TRANSP_Pos 0 /**< \brief (USB_PADCAL) USB Pad Transp calibration */
+#define USB_PADCAL_TRANSP_Msk (0x1Ful << USB_PADCAL_TRANSP_Pos)
+#define USB_PADCAL_TRANSP(value) ((USB_PADCAL_TRANSP_Msk & ((value) << USB_PADCAL_TRANSP_Pos)))
+#define USB_PADCAL_TRANSN_Pos 6 /**< \brief (USB_PADCAL) USB Pad Transn calibration */
+#define USB_PADCAL_TRANSN_Msk (0x1Ful << USB_PADCAL_TRANSN_Pos)
+#define USB_PADCAL_TRANSN(value) ((USB_PADCAL_TRANSN_Msk & ((value) << USB_PADCAL_TRANSN_Pos)))
+#define USB_PADCAL_TRIM_Pos 12 /**< \brief (USB_PADCAL) USB Pad Trim calibration */
+#define USB_PADCAL_TRIM_Msk (0x7ul << USB_PADCAL_TRIM_Pos)
+#define USB_PADCAL_TRIM(value) ((USB_PADCAL_TRIM_Msk & ((value) << USB_PADCAL_TRIM_Pos)))
+#define USB_PADCAL_MASK 0x77DFul /**< \brief (USB_PADCAL) MASK Register */
+
+/* -------- USB_DEVICE_EPCFG : (USB Offset: 0x100) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Configuration -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t EPTYPE0:3; /*!< bit: 0.. 2 End Point Type0 */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t EPTYPE1:3; /*!< bit: 4.. 6 End Point Type1 */
+ uint8_t NYETDIS:1; /*!< bit: 7 NYET Token Disable */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPCFG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPCFG_OFFSET 0x100 /**< \brief (USB_DEVICE_EPCFG offset) DEVICE_ENDPOINT End Point Configuration */
+#define USB_DEVICE_EPCFG_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPCFG reset_value) DEVICE_ENDPOINT End Point Configuration */
+
+#define USB_DEVICE_EPCFG_EPTYPE0_Pos 0 /**< \brief (USB_DEVICE_EPCFG) End Point Type0 */
+#define USB_DEVICE_EPCFG_EPTYPE0_Msk (0x7ul << USB_DEVICE_EPCFG_EPTYPE0_Pos)
+#define USB_DEVICE_EPCFG_EPTYPE0(value) ((USB_DEVICE_EPCFG_EPTYPE0_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE0_Pos)))
+#define USB_DEVICE_EPCFG_EPTYPE1_Pos 4 /**< \brief (USB_DEVICE_EPCFG) End Point Type1 */
+#define USB_DEVICE_EPCFG_EPTYPE1_Msk (0x7ul << USB_DEVICE_EPCFG_EPTYPE1_Pos)
+#define USB_DEVICE_EPCFG_EPTYPE1(value) ((USB_DEVICE_EPCFG_EPTYPE1_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE1_Pos)))
+#define USB_DEVICE_EPCFG_NYETDIS_Pos 7 /**< \brief (USB_DEVICE_EPCFG) NYET Token Disable */
+#define USB_DEVICE_EPCFG_NYETDIS (0x1ul << USB_DEVICE_EPCFG_NYETDIS_Pos)
+#define USB_DEVICE_EPCFG_MASK 0xF7ul /**< \brief (USB_DEVICE_EPCFG) MASK Register */
+
+/* -------- USB_HOST_PCFG : (USB Offset: 0x100) (R/W 8) HOST HOST_PIPE End Point Configuration -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t PTOKEN:2; /*!< bit: 0.. 1 Pipe Token */
+ uint8_t BK:1; /*!< bit: 2 Pipe Bank */
+ uint8_t PTYPE:3; /*!< bit: 3.. 5 Pipe Type */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PCFG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PCFG_OFFSET 0x100 /**< \brief (USB_HOST_PCFG offset) HOST_PIPE End Point Configuration */
+#define USB_HOST_PCFG_RESETVALUE 0x00ul /**< \brief (USB_HOST_PCFG reset_value) HOST_PIPE End Point Configuration */
+
+#define USB_HOST_PCFG_PTOKEN_Pos 0 /**< \brief (USB_HOST_PCFG) Pipe Token */
+#define USB_HOST_PCFG_PTOKEN_Msk (0x3ul << USB_HOST_PCFG_PTOKEN_Pos)
+#define USB_HOST_PCFG_PTOKEN(value) ((USB_HOST_PCFG_PTOKEN_Msk & ((value) << USB_HOST_PCFG_PTOKEN_Pos)))
+#define USB_HOST_PCFG_BK_Pos 2 /**< \brief (USB_HOST_PCFG) Pipe Bank */
+#define USB_HOST_PCFG_BK (0x1ul << USB_HOST_PCFG_BK_Pos)
+#define USB_HOST_PCFG_PTYPE_Pos 3 /**< \brief (USB_HOST_PCFG) Pipe Type */
+#define USB_HOST_PCFG_PTYPE_Msk (0x7ul << USB_HOST_PCFG_PTYPE_Pos)
+#define USB_HOST_PCFG_PTYPE(value) ((USB_HOST_PCFG_PTYPE_Msk & ((value) << USB_HOST_PCFG_PTYPE_Pos)))
+#define USB_HOST_PCFG_MASK 0x3Ful /**< \brief (USB_HOST_PCFG) MASK Register */
+
+/* -------- USB_HOST_BINTERVAL : (USB Offset: 0x103) (R/W 8) HOST HOST_PIPE Bus Access Period of Pipe -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t BITINTERVAL:8; /*!< bit: 0.. 7 Bit Interval */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_BINTERVAL_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_BINTERVAL_OFFSET 0x103 /**< \brief (USB_HOST_BINTERVAL offset) HOST_PIPE Bus Access Period of Pipe */
+#define USB_HOST_BINTERVAL_RESETVALUE 0x00ul /**< \brief (USB_HOST_BINTERVAL reset_value) HOST_PIPE Bus Access Period of Pipe */
+
+#define USB_HOST_BINTERVAL_BITINTERVAL_Pos 0 /**< \brief (USB_HOST_BINTERVAL) Bit Interval */
+#define USB_HOST_BINTERVAL_BITINTERVAL_Msk (0xFFul << USB_HOST_BINTERVAL_BITINTERVAL_Pos)
+#define USB_HOST_BINTERVAL_BITINTERVAL(value) ((USB_HOST_BINTERVAL_BITINTERVAL_Msk & ((value) << USB_HOST_BINTERVAL_BITINTERVAL_Pos)))
+#define USB_HOST_BINTERVAL_MASK 0xFFul /**< \brief (USB_HOST_BINTERVAL) MASK Register */
+
+/* -------- USB_DEVICE_EPSTATUSCLR : (USB Offset: 0x104) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Clear */
+ uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Clear */
+ uint8_t CURBK:1; /*!< bit: 2 Curren Bank Clear */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Clear */
+ uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Clear */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t :4; /*!< bit: 0.. 3 Reserved */
+ uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Clear */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPSTATUSCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPSTATUSCLR_OFFSET 0x104 /**< \brief (USB_DEVICE_EPSTATUSCLR offset) DEVICE_ENDPOINT End Point Pipe Status Clear */
+#define USB_DEVICE_EPSTATUSCLR_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUSCLR reset_value) DEVICE_ENDPOINT End Point Pipe Status Clear */
+
+#define USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle OUT Clear */
+#define USB_DEVICE_EPSTATUSCLR_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos)
+#define USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle IN Clear */
+#define USB_DEVICE_EPSTATUSCLR_DTGLIN (0x1ul << USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos)
+#define USB_DEVICE_EPSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSCLR) Curren Bank Clear */
+#define USB_DEVICE_EPSTATUSCLR_CURBK (0x1ul << USB_DEVICE_EPSTATUSCLR_CURBK_Pos)
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 0 Request Clear */
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ0 (1 << USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos)
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 1 Request Clear */
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ1 (1 << USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos)
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall x Request Clear */
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos)
+#define USB_DEVICE_EPSTATUSCLR_STALLRQ(value) ((USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos)))
+#define USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 0 Ready Clear */
+#define USB_DEVICE_EPSTATUSCLR_BK0RDY (0x1ul << USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos)
+#define USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 1 Ready Clear */
+#define USB_DEVICE_EPSTATUSCLR_BK1RDY (0x1ul << USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos)
+#define USB_DEVICE_EPSTATUSCLR_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUSCLR) MASK Register */
+
+/* -------- USB_HOST_PSTATUSCLR : (USB Offset: 0x104) ( /W 8) HOST HOST_PIPE End Point Pipe Status Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGL:1; /*!< bit: 0 Data Toggle clear */
+ uint8_t :1; /*!< bit: 1 Reserved */
+ uint8_t CURBK:1; /*!< bit: 2 Curren Bank clear */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze Clear */
+ uint8_t :1; /*!< bit: 5 Reserved */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PSTATUSCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PSTATUSCLR_OFFSET 0x104 /**< \brief (USB_HOST_PSTATUSCLR offset) HOST_PIPE End Point Pipe Status Clear */
+#define USB_HOST_PSTATUSCLR_RESETVALUE 0x00ul /**< \brief (USB_HOST_PSTATUSCLR reset_value) HOST_PIPE End Point Pipe Status Clear */
+
+#define USB_HOST_PSTATUSCLR_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUSCLR) Data Toggle clear */
+#define USB_HOST_PSTATUSCLR_DTGL (0x1ul << USB_HOST_PSTATUSCLR_DTGL_Pos)
+#define USB_HOST_PSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUSCLR) Curren Bank clear */
+#define USB_HOST_PSTATUSCLR_CURBK (0x1ul << USB_HOST_PSTATUSCLR_CURBK_Pos)
+#define USB_HOST_PSTATUSCLR_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUSCLR) Pipe Freeze Clear */
+#define USB_HOST_PSTATUSCLR_PFREEZE (0x1ul << USB_HOST_PSTATUSCLR_PFREEZE_Pos)
+#define USB_HOST_PSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUSCLR) Bank 0 Ready Clear */
+#define USB_HOST_PSTATUSCLR_BK0RDY (0x1ul << USB_HOST_PSTATUSCLR_BK0RDY_Pos)
+#define USB_HOST_PSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUSCLR) Bank 1 Ready Clear */
+#define USB_HOST_PSTATUSCLR_BK1RDY (0x1ul << USB_HOST_PSTATUSCLR_BK1RDY_Pos)
+#define USB_HOST_PSTATUSCLR_MASK 0xD5ul /**< \brief (USB_HOST_PSTATUSCLR) MASK Register */
+
+/* -------- USB_DEVICE_EPSTATUSSET : (USB Offset: 0x105) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Set */
+ uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Set */
+ uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Set */
+ uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Set */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t :4; /*!< bit: 0.. 3 Reserved */
+ uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Set */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPSTATUSSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPSTATUSSET_OFFSET 0x105 /**< \brief (USB_DEVICE_EPSTATUSSET offset) DEVICE_ENDPOINT End Point Pipe Status Set */
+#define USB_DEVICE_EPSTATUSSET_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUSSET reset_value) DEVICE_ENDPOINT End Point Pipe Status Set */
+
+#define USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle OUT Set */
+#define USB_DEVICE_EPSTATUSSET_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos)
+#define USB_DEVICE_EPSTATUSSET_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle IN Set */
+#define USB_DEVICE_EPSTATUSSET_DTGLIN (0x1ul << USB_DEVICE_EPSTATUSSET_DTGLIN_Pos)
+#define USB_DEVICE_EPSTATUSSET_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSSET) Current Bank Set */
+#define USB_DEVICE_EPSTATUSSET_CURBK (0x1ul << USB_DEVICE_EPSTATUSSET_CURBK_Pos)
+#define USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 0 Request Set */
+#define USB_DEVICE_EPSTATUSSET_STALLRQ0 (1 << USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos)
+#define USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 1 Request Set */
+#define USB_DEVICE_EPSTATUSSET_STALLRQ1 (1 << USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos)
+#define USB_DEVICE_EPSTATUSSET_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall x Request Set */
+#define USB_DEVICE_EPSTATUSSET_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos)
+#define USB_DEVICE_EPSTATUSSET_STALLRQ(value) ((USB_DEVICE_EPSTATUSSET_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos)))
+#define USB_DEVICE_EPSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 0 Ready Set */
+#define USB_DEVICE_EPSTATUSSET_BK0RDY (0x1ul << USB_DEVICE_EPSTATUSSET_BK0RDY_Pos)
+#define USB_DEVICE_EPSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 1 Ready Set */
+#define USB_DEVICE_EPSTATUSSET_BK1RDY (0x1ul << USB_DEVICE_EPSTATUSSET_BK1RDY_Pos)
+#define USB_DEVICE_EPSTATUSSET_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUSSET) MASK Register */
+
+/* -------- USB_HOST_PSTATUSSET : (USB Offset: 0x105) ( /W 8) HOST HOST_PIPE End Point Pipe Status Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGL:1; /*!< bit: 0 Data Toggle Set */
+ uint8_t :1; /*!< bit: 1 Reserved */
+ uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze Set */
+ uint8_t :1; /*!< bit: 5 Reserved */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PSTATUSSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PSTATUSSET_OFFSET 0x105 /**< \brief (USB_HOST_PSTATUSSET offset) HOST_PIPE End Point Pipe Status Set */
+#define USB_HOST_PSTATUSSET_RESETVALUE 0x00ul /**< \brief (USB_HOST_PSTATUSSET reset_value) HOST_PIPE End Point Pipe Status Set */
+
+#define USB_HOST_PSTATUSSET_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUSSET) Data Toggle Set */
+#define USB_HOST_PSTATUSSET_DTGL (0x1ul << USB_HOST_PSTATUSSET_DTGL_Pos)
+#define USB_HOST_PSTATUSSET_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUSSET) Current Bank Set */
+#define USB_HOST_PSTATUSSET_CURBK (0x1ul << USB_HOST_PSTATUSSET_CURBK_Pos)
+#define USB_HOST_PSTATUSSET_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUSSET) Pipe Freeze Set */
+#define USB_HOST_PSTATUSSET_PFREEZE (0x1ul << USB_HOST_PSTATUSSET_PFREEZE_Pos)
+#define USB_HOST_PSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUSSET) Bank 0 Ready Set */
+#define USB_HOST_PSTATUSSET_BK0RDY (0x1ul << USB_HOST_PSTATUSSET_BK0RDY_Pos)
+#define USB_HOST_PSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUSSET) Bank 1 Ready Set */
+#define USB_HOST_PSTATUSSET_BK1RDY (0x1ul << USB_HOST_PSTATUSSET_BK1RDY_Pos)
+#define USB_HOST_PSTATUSSET_MASK 0xD5ul /**< \brief (USB_HOST_PSTATUSSET) MASK Register */
+
+/* -------- USB_DEVICE_EPSTATUS : (USB Offset: 0x106) (R/ 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle Out */
+ uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle In */
+ uint8_t CURBK:1; /*!< bit: 2 Current Bank */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request */
+ uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t :4; /*!< bit: 0.. 3 Reserved */
+ uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPSTATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPSTATUS_OFFSET 0x106 /**< \brief (USB_DEVICE_EPSTATUS offset) DEVICE_ENDPOINT End Point Pipe Status */
+#define USB_DEVICE_EPSTATUS_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPSTATUS reset_value) DEVICE_ENDPOINT End Point Pipe Status */
+
+#define USB_DEVICE_EPSTATUS_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle Out */
+#define USB_DEVICE_EPSTATUS_DTGLOUT (0x1ul << USB_DEVICE_EPSTATUS_DTGLOUT_Pos)
+#define USB_DEVICE_EPSTATUS_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle In */
+#define USB_DEVICE_EPSTATUS_DTGLIN (0x1ul << USB_DEVICE_EPSTATUS_DTGLIN_Pos)
+#define USB_DEVICE_EPSTATUS_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUS) Current Bank */
+#define USB_DEVICE_EPSTATUS_CURBK (0x1ul << USB_DEVICE_EPSTATUS_CURBK_Pos)
+#define USB_DEVICE_EPSTATUS_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall 0 Request */
+#define USB_DEVICE_EPSTATUS_STALLRQ0 (1 << USB_DEVICE_EPSTATUS_STALLRQ0_Pos)
+#define USB_DEVICE_EPSTATUS_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUS) Stall 1 Request */
+#define USB_DEVICE_EPSTATUS_STALLRQ1 (1 << USB_DEVICE_EPSTATUS_STALLRQ1_Pos)
+#define USB_DEVICE_EPSTATUS_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall x Request */
+#define USB_DEVICE_EPSTATUS_STALLRQ_Msk (0x3ul << USB_DEVICE_EPSTATUS_STALLRQ_Pos)
+#define USB_DEVICE_EPSTATUS_STALLRQ(value) ((USB_DEVICE_EPSTATUS_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUS_STALLRQ_Pos)))
+#define USB_DEVICE_EPSTATUS_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUS) Bank 0 ready */
+#define USB_DEVICE_EPSTATUS_BK0RDY (0x1ul << USB_DEVICE_EPSTATUS_BK0RDY_Pos)
+#define USB_DEVICE_EPSTATUS_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUS) Bank 1 ready */
+#define USB_DEVICE_EPSTATUS_BK1RDY (0x1ul << USB_DEVICE_EPSTATUS_BK1RDY_Pos)
+#define USB_DEVICE_EPSTATUS_MASK 0xF7ul /**< \brief (USB_DEVICE_EPSTATUS) MASK Register */
+
+/* -------- USB_HOST_PSTATUS : (USB Offset: 0x106) (R/ 8) HOST HOST_PIPE End Point Pipe Status -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t DTGL:1; /*!< bit: 0 Data Toggle */
+ uint8_t :1; /*!< bit: 1 Reserved */
+ uint8_t CURBK:1; /*!< bit: 2 Current Bank */
+ uint8_t :1; /*!< bit: 3 Reserved */
+ uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze */
+ uint8_t :1; /*!< bit: 5 Reserved */
+ uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */
+ uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PSTATUS_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PSTATUS_OFFSET 0x106 /**< \brief (USB_HOST_PSTATUS offset) HOST_PIPE End Point Pipe Status */
+#define USB_HOST_PSTATUS_RESETVALUE 0x00ul /**< \brief (USB_HOST_PSTATUS reset_value) HOST_PIPE End Point Pipe Status */
+
+#define USB_HOST_PSTATUS_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUS) Data Toggle */
+#define USB_HOST_PSTATUS_DTGL (0x1ul << USB_HOST_PSTATUS_DTGL_Pos)
+#define USB_HOST_PSTATUS_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUS) Current Bank */
+#define USB_HOST_PSTATUS_CURBK (0x1ul << USB_HOST_PSTATUS_CURBK_Pos)
+#define USB_HOST_PSTATUS_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUS) Pipe Freeze */
+#define USB_HOST_PSTATUS_PFREEZE (0x1ul << USB_HOST_PSTATUS_PFREEZE_Pos)
+#define USB_HOST_PSTATUS_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUS) Bank 0 ready */
+#define USB_HOST_PSTATUS_BK0RDY (0x1ul << USB_HOST_PSTATUS_BK0RDY_Pos)
+#define USB_HOST_PSTATUS_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUS) Bank 1 ready */
+#define USB_HOST_PSTATUS_BK1RDY (0x1ul << USB_HOST_PSTATUS_BK1RDY_Pos)
+#define USB_HOST_PSTATUS_MASK 0xD5ul /**< \brief (USB_HOST_PSTATUS) MASK Register */
+
+/* -------- USB_DEVICE_EPINTFLAG : (USB Offset: 0x107) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 */
+ uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 */
+ uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 */
+ uint8_t RXSTP:1; /*!< bit: 4 Received Setup */
+ uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out */
+ uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x */
+ uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x */
+ uint8_t :1; /*!< bit: 4 Reserved */
+ uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPINTFLAG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPINTFLAG_OFFSET 0x107 /**< \brief (USB_DEVICE_EPINTFLAG offset) DEVICE_ENDPOINT End Point Interrupt Flag */
+#define USB_DEVICE_EPINTFLAG_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTFLAG reset_value) DEVICE_ENDPOINT End Point Interrupt Flag */
+
+#define USB_DEVICE_EPINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 0 */
+#define USB_DEVICE_EPINTFLAG_TRCPT0 (1 << USB_DEVICE_EPINTFLAG_TRCPT0_Pos)
+#define USB_DEVICE_EPINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 1 */
+#define USB_DEVICE_EPINTFLAG_TRCPT1 (1 << USB_DEVICE_EPINTFLAG_TRCPT1_Pos)
+#define USB_DEVICE_EPINTFLAG_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete x */
+#define USB_DEVICE_EPINTFLAG_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTFLAG_TRCPT_Pos)
+#define USB_DEVICE_EPINTFLAG_TRCPT(value) ((USB_DEVICE_EPINTFLAG_TRCPT_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRCPT_Pos)))
+#define USB_DEVICE_EPINTFLAG_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 0 */
+#define USB_DEVICE_EPINTFLAG_TRFAIL0 (1 << USB_DEVICE_EPINTFLAG_TRFAIL0_Pos)
+#define USB_DEVICE_EPINTFLAG_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 1 */
+#define USB_DEVICE_EPINTFLAG_TRFAIL1 (1 << USB_DEVICE_EPINTFLAG_TRFAIL1_Pos)
+#define USB_DEVICE_EPINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow x */
+#define USB_DEVICE_EPINTFLAG_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTFLAG_TRFAIL_Pos)
+#define USB_DEVICE_EPINTFLAG_TRFAIL(value) ((USB_DEVICE_EPINTFLAG_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos)))
+#define USB_DEVICE_EPINTFLAG_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTFLAG) Received Setup */
+#define USB_DEVICE_EPINTFLAG_RXSTP (0x1ul << USB_DEVICE_EPINTFLAG_RXSTP_Pos)
+#define USB_DEVICE_EPINTFLAG_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 0 In/out */
+#define USB_DEVICE_EPINTFLAG_STALL0 (1 << USB_DEVICE_EPINTFLAG_STALL0_Pos)
+#define USB_DEVICE_EPINTFLAG_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 1 In/out */
+#define USB_DEVICE_EPINTFLAG_STALL1 (1 << USB_DEVICE_EPINTFLAG_STALL1_Pos)
+#define USB_DEVICE_EPINTFLAG_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall x In/out */
+#define USB_DEVICE_EPINTFLAG_STALL_Msk (0x3ul << USB_DEVICE_EPINTFLAG_STALL_Pos)
+#define USB_DEVICE_EPINTFLAG_STALL(value) ((USB_DEVICE_EPINTFLAG_STALL_Msk & ((value) << USB_DEVICE_EPINTFLAG_STALL_Pos)))
+#define USB_DEVICE_EPINTFLAG_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTFLAG) MASK Register */
+
+/* -------- USB_HOST_PINTFLAG : (USB Offset: 0x107) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Flag */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Flag */
+ uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Flag */
+ uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Flag */
+ uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Flag */
+ uint8_t STALL:1; /*!< bit: 5 Stall Interrupt Flag */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Flag */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PINTFLAG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PINTFLAG_OFFSET 0x107 /**< \brief (USB_HOST_PINTFLAG offset) HOST_PIPE Pipe Interrupt Flag */
+#define USB_HOST_PINTFLAG_RESETVALUE 0x00ul /**< \brief (USB_HOST_PINTFLAG reset_value) HOST_PIPE Pipe Interrupt Flag */
+
+#define USB_HOST_PINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete 0 Interrupt Flag */
+#define USB_HOST_PINTFLAG_TRCPT0 (1 << USB_HOST_PINTFLAG_TRCPT0_Pos)
+#define USB_HOST_PINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete 1 Interrupt Flag */
+#define USB_HOST_PINTFLAG_TRCPT1 (1 << USB_HOST_PINTFLAG_TRCPT1_Pos)
+#define USB_HOST_PINTFLAG_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete x Interrupt Flag */
+#define USB_HOST_PINTFLAG_TRCPT_Msk (0x3ul << USB_HOST_PINTFLAG_TRCPT_Pos)
+#define USB_HOST_PINTFLAG_TRCPT(value) ((USB_HOST_PINTFLAG_TRCPT_Msk & ((value) << USB_HOST_PINTFLAG_TRCPT_Pos)))
+#define USB_HOST_PINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTFLAG) Error Flow Interrupt Flag */
+#define USB_HOST_PINTFLAG_TRFAIL (0x1ul << USB_HOST_PINTFLAG_TRFAIL_Pos)
+#define USB_HOST_PINTFLAG_PERR_Pos 3 /**< \brief (USB_HOST_PINTFLAG) Pipe Error Interrupt Flag */
+#define USB_HOST_PINTFLAG_PERR (0x1ul << USB_HOST_PINTFLAG_PERR_Pos)
+#define USB_HOST_PINTFLAG_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTFLAG) Transmit Setup Interrupt Flag */
+#define USB_HOST_PINTFLAG_TXSTP (0x1ul << USB_HOST_PINTFLAG_TXSTP_Pos)
+#define USB_HOST_PINTFLAG_STALL_Pos 5 /**< \brief (USB_HOST_PINTFLAG) Stall Interrupt Flag */
+#define USB_HOST_PINTFLAG_STALL (0x1ul << USB_HOST_PINTFLAG_STALL_Pos)
+#define USB_HOST_PINTFLAG_MASK 0x3Ful /**< \brief (USB_HOST_PINTFLAG) MASK Register */
+
+/* -------- USB_DEVICE_EPINTENCLR : (USB Offset: 0x108) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Clear Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Disable */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Disable */
+ uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Disable */
+ uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Disable */
+ uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Disable */
+ uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/Out Interrupt Disable */
+ uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/Out Interrupt Disable */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Disable */
+ uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Disable */
+ uint8_t :1; /*!< bit: 4 Reserved */
+ uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/Out Interrupt Disable */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPINTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPINTENCLR_OFFSET 0x108 /**< \brief (USB_DEVICE_EPINTENCLR offset) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
+#define USB_DEVICE_EPINTENCLR_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTENCLR reset_value) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
+
+#define USB_DEVICE_EPINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 0 Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRCPT0 (1 << USB_DEVICE_EPINTENCLR_TRCPT0_Pos)
+#define USB_DEVICE_EPINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 1 Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRCPT1 (1 << USB_DEVICE_EPINTENCLR_TRCPT1_Pos)
+#define USB_DEVICE_EPINTENCLR_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete x Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTENCLR_TRCPT_Pos)
+#define USB_DEVICE_EPINTENCLR_TRCPT(value) ((USB_DEVICE_EPINTENCLR_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRCPT_Pos)))
+#define USB_DEVICE_EPINTENCLR_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 0 Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRFAIL0 (1 << USB_DEVICE_EPINTENCLR_TRFAIL0_Pos)
+#define USB_DEVICE_EPINTENCLR_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 1 Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRFAIL1 (1 << USB_DEVICE_EPINTENCLR_TRFAIL1_Pos)
+#define USB_DEVICE_EPINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow x Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTENCLR_TRFAIL_Pos)
+#define USB_DEVICE_EPINTENCLR_TRFAIL(value) ((USB_DEVICE_EPINTENCLR_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos)))
+#define USB_DEVICE_EPINTENCLR_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENCLR) Received Setup Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_RXSTP (0x1ul << USB_DEVICE_EPINTENCLR_RXSTP_Pos)
+#define USB_DEVICE_EPINTENCLR_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 0 In/Out Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_STALL0 (1 << USB_DEVICE_EPINTENCLR_STALL0_Pos)
+#define USB_DEVICE_EPINTENCLR_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 1 In/Out Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_STALL1 (1 << USB_DEVICE_EPINTENCLR_STALL1_Pos)
+#define USB_DEVICE_EPINTENCLR_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall x In/Out Interrupt Disable */
+#define USB_DEVICE_EPINTENCLR_STALL_Msk (0x3ul << USB_DEVICE_EPINTENCLR_STALL_Pos)
+#define USB_DEVICE_EPINTENCLR_STALL(value) ((USB_DEVICE_EPINTENCLR_STALL_Msk & ((value) << USB_DEVICE_EPINTENCLR_STALL_Pos)))
+#define USB_DEVICE_EPINTENCLR_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTENCLR) MASK Register */
+
+/* -------- USB_HOST_PINTENCLR : (USB Offset: 0x108) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag Clear -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Disable */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Disable */
+ uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Disable */
+ uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Disable */
+ uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Disable */
+ uint8_t STALL:1; /*!< bit: 5 Stall Interrupt Disable */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Disable */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PINTENCLR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PINTENCLR_OFFSET 0x108 /**< \brief (USB_HOST_PINTENCLR offset) HOST_PIPE Pipe Interrupt Flag Clear */
+#define USB_HOST_PINTENCLR_RESETVALUE 0x00ul /**< \brief (USB_HOST_PINTENCLR reset_value) HOST_PIPE Pipe Interrupt Flag Clear */
+
+#define USB_HOST_PINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete 0 Disable */
+#define USB_HOST_PINTENCLR_TRCPT0 (1 << USB_HOST_PINTENCLR_TRCPT0_Pos)
+#define USB_HOST_PINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete 1 Disable */
+#define USB_HOST_PINTENCLR_TRCPT1 (1 << USB_HOST_PINTENCLR_TRCPT1_Pos)
+#define USB_HOST_PINTENCLR_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete x Disable */
+#define USB_HOST_PINTENCLR_TRCPT_Msk (0x3ul << USB_HOST_PINTENCLR_TRCPT_Pos)
+#define USB_HOST_PINTENCLR_TRCPT(value) ((USB_HOST_PINTENCLR_TRCPT_Msk & ((value) << USB_HOST_PINTENCLR_TRCPT_Pos)))
+#define USB_HOST_PINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTENCLR) Error Flow Interrupt Disable */
+#define USB_HOST_PINTENCLR_TRFAIL (0x1ul << USB_HOST_PINTENCLR_TRFAIL_Pos)
+#define USB_HOST_PINTENCLR_PERR_Pos 3 /**< \brief (USB_HOST_PINTENCLR) Pipe Error Interrupt Disable */
+#define USB_HOST_PINTENCLR_PERR (0x1ul << USB_HOST_PINTENCLR_PERR_Pos)
+#define USB_HOST_PINTENCLR_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTENCLR) Transmit Setup Interrupt Disable */
+#define USB_HOST_PINTENCLR_TXSTP (0x1ul << USB_HOST_PINTENCLR_TXSTP_Pos)
+#define USB_HOST_PINTENCLR_STALL_Pos 5 /**< \brief (USB_HOST_PINTENCLR) Stall Interrupt Disable */
+#define USB_HOST_PINTENCLR_STALL (0x1ul << USB_HOST_PINTENCLR_STALL_Pos)
+#define USB_HOST_PINTENCLR_MASK 0x3Ful /**< \brief (USB_HOST_PINTENCLR) MASK Register */
+
+/* -------- USB_DEVICE_EPINTENSET : (USB Offset: 0x109) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Set Flag -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */
+ uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Enable */
+ uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Enable */
+ uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Enable */
+ uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out Interrupt enable */
+ uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out Interrupt enable */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */
+ uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Enable */
+ uint8_t :1; /*!< bit: 4 Reserved */
+ uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out Interrupt enable */
+ uint8_t :1; /*!< bit: 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_EPINTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EPINTENSET_OFFSET 0x109 /**< \brief (USB_DEVICE_EPINTENSET offset) DEVICE_ENDPOINT End Point Interrupt Set Flag */
+#define USB_DEVICE_EPINTENSET_RESETVALUE 0x00ul /**< \brief (USB_DEVICE_EPINTENSET reset_value) DEVICE_ENDPOINT End Point Interrupt Set Flag */
+
+#define USB_DEVICE_EPINTENSET_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 0 Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRCPT0 (1 << USB_DEVICE_EPINTENSET_TRCPT0_Pos)
+#define USB_DEVICE_EPINTENSET_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 1 Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRCPT1 (1 << USB_DEVICE_EPINTENSET_TRCPT1_Pos)
+#define USB_DEVICE_EPINTENSET_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete x Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRCPT_Msk (0x3ul << USB_DEVICE_EPINTENSET_TRCPT_Pos)
+#define USB_DEVICE_EPINTENSET_TRCPT(value) ((USB_DEVICE_EPINTENSET_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENSET_TRCPT_Pos)))
+#define USB_DEVICE_EPINTENSET_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 0 Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRFAIL0 (1 << USB_DEVICE_EPINTENSET_TRFAIL0_Pos)
+#define USB_DEVICE_EPINTENSET_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 1 Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRFAIL1 (1 << USB_DEVICE_EPINTENSET_TRFAIL1_Pos)
+#define USB_DEVICE_EPINTENSET_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow x Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_TRFAIL_Msk (0x3ul << USB_DEVICE_EPINTENSET_TRFAIL_Pos)
+#define USB_DEVICE_EPINTENSET_TRFAIL(value) ((USB_DEVICE_EPINTENSET_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENSET_TRFAIL_Pos)))
+#define USB_DEVICE_EPINTENSET_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENSET) Received Setup Interrupt Enable */
+#define USB_DEVICE_EPINTENSET_RXSTP (0x1ul << USB_DEVICE_EPINTENSET_RXSTP_Pos)
+#define USB_DEVICE_EPINTENSET_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall 0 In/out Interrupt enable */
+#define USB_DEVICE_EPINTENSET_STALL0 (1 << USB_DEVICE_EPINTENSET_STALL0_Pos)
+#define USB_DEVICE_EPINTENSET_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENSET) Stall 1 In/out Interrupt enable */
+#define USB_DEVICE_EPINTENSET_STALL1 (1 << USB_DEVICE_EPINTENSET_STALL1_Pos)
+#define USB_DEVICE_EPINTENSET_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall x In/out Interrupt enable */
+#define USB_DEVICE_EPINTENSET_STALL_Msk (0x3ul << USB_DEVICE_EPINTENSET_STALL_Pos)
+#define USB_DEVICE_EPINTENSET_STALL(value) ((USB_DEVICE_EPINTENSET_STALL_Msk & ((value) << USB_DEVICE_EPINTENSET_STALL_Pos)))
+#define USB_DEVICE_EPINTENSET_MASK 0x7Ful /**< \brief (USB_DEVICE_EPINTENSET) MASK Register */
+
+/* -------- USB_HOST_PINTENSET : (USB Offset: 0x109) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag Set -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */
+ uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */
+ uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Enable */
+ uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Enable */
+ uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Enable */
+ uint8_t STALL:1; /*!< bit: 5 Stall Interrupt Enable */
+ uint8_t :2; /*!< bit: 6.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ struct {
+ uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } vec; /*!< Structure used for vec access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_PINTENSET_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PINTENSET_OFFSET 0x109 /**< \brief (USB_HOST_PINTENSET offset) HOST_PIPE Pipe Interrupt Flag Set */
+#define USB_HOST_PINTENSET_RESETVALUE 0x00ul /**< \brief (USB_HOST_PINTENSET reset_value) HOST_PIPE Pipe Interrupt Flag Set */
+
+#define USB_HOST_PINTENSET_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTENSET) Transfer Complete 0 Interrupt Enable */
+#define USB_HOST_PINTENSET_TRCPT0 (1 << USB_HOST_PINTENSET_TRCPT0_Pos)
+#define USB_HOST_PINTENSET_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTENSET) Transfer Complete 1 Interrupt Enable */
+#define USB_HOST_PINTENSET_TRCPT1 (1 << USB_HOST_PINTENSET_TRCPT1_Pos)
+#define USB_HOST_PINTENSET_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTENSET) Transfer Complete x Interrupt Enable */
+#define USB_HOST_PINTENSET_TRCPT_Msk (0x3ul << USB_HOST_PINTENSET_TRCPT_Pos)
+#define USB_HOST_PINTENSET_TRCPT(value) ((USB_HOST_PINTENSET_TRCPT_Msk & ((value) << USB_HOST_PINTENSET_TRCPT_Pos)))
+#define USB_HOST_PINTENSET_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTENSET) Error Flow Interrupt Enable */
+#define USB_HOST_PINTENSET_TRFAIL (0x1ul << USB_HOST_PINTENSET_TRFAIL_Pos)
+#define USB_HOST_PINTENSET_PERR_Pos 3 /**< \brief (USB_HOST_PINTENSET) Pipe Error Interrupt Enable */
+#define USB_HOST_PINTENSET_PERR (0x1ul << USB_HOST_PINTENSET_PERR_Pos)
+#define USB_HOST_PINTENSET_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTENSET) Transmit Setup Interrupt Enable */
+#define USB_HOST_PINTENSET_TXSTP (0x1ul << USB_HOST_PINTENSET_TXSTP_Pos)
+#define USB_HOST_PINTENSET_STALL_Pos 5 /**< \brief (USB_HOST_PINTENSET) Stall Interrupt Enable */
+#define USB_HOST_PINTENSET_STALL (0x1ul << USB_HOST_PINTENSET_STALL_Pos)
+#define USB_HOST_PINTENSET_MASK 0x3Ful /**< \brief (USB_HOST_PINTENSET) MASK Register */
+
+/* -------- USB_DEVICE_ADDR : (USB Offset: 0x000) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */
+ } bit; /*!< Structure used for bit access */
+ uint32_t reg; /*!< Type used for register access */
+} USB_DEVICE_ADDR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_ADDR_OFFSET 0x000 /**< \brief (USB_DEVICE_ADDR offset) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
+
+#define USB_DEVICE_ADDR_ADDR_Pos 0 /**< \brief (USB_DEVICE_ADDR) Adress of data buffer */
+#define USB_DEVICE_ADDR_ADDR_Msk (0xFFFFFFFFul << USB_DEVICE_ADDR_ADDR_Pos)
+#define USB_DEVICE_ADDR_ADDR(value) ((USB_DEVICE_ADDR_ADDR_Msk & ((value) << USB_DEVICE_ADDR_ADDR_Pos)))
+#define USB_DEVICE_ADDR_MASK 0xFFFFFFFFul /**< \brief (USB_DEVICE_ADDR) MASK Register */
+
+/* -------- USB_HOST_ADDR : (USB Offset: 0x000) (R/W 32) HOST HOST_DESC_BANK Host Bank, Adress of Data Buffer -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */
+ } bit; /*!< Structure used for bit access */
+ uint32_t reg; /*!< Type used for register access */
+} USB_HOST_ADDR_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_ADDR_OFFSET 0x000 /**< \brief (USB_HOST_ADDR offset) HOST_DESC_BANK Host Bank, Adress of Data Buffer */
+
+#define USB_HOST_ADDR_ADDR_Pos 0 /**< \brief (USB_HOST_ADDR) Adress of data buffer */
+#define USB_HOST_ADDR_ADDR_Msk (0xFFFFFFFFul << USB_HOST_ADDR_ADDR_Pos)
+#define USB_HOST_ADDR_ADDR(value) ((USB_HOST_ADDR_ADDR_Msk & ((value) << USB_HOST_ADDR_ADDR_Pos)))
+#define USB_HOST_ADDR_MASK 0xFFFFFFFFul /**< \brief (USB_HOST_ADDR) MASK Register */
+
+/* -------- USB_DEVICE_PCKSIZE : (USB Offset: 0x004) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Packet Size -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */
+ uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */
+ uint32_t SIZE:3; /*!< bit: 28..30 Enpoint size */
+ uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */
+ } bit; /*!< Structure used for bit access */
+ uint32_t reg; /*!< Type used for register access */
+} USB_DEVICE_PCKSIZE_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_PCKSIZE_OFFSET 0x004 /**< \brief (USB_DEVICE_PCKSIZE offset) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
+
+#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_DEVICE_PCKSIZE) Byte Count */
+#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk (0x3FFFul << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos)
+#define USB_DEVICE_PCKSIZE_BYTE_COUNT(value) ((USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos)))
+#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_DEVICE_PCKSIZE) Multi Packet In or Out size */
+#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk (0x3FFFul << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos)
+#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE(value) ((USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos)))
+#define USB_DEVICE_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_DEVICE_PCKSIZE) Enpoint size */
+#define USB_DEVICE_PCKSIZE_SIZE_Msk (0x7ul << USB_DEVICE_PCKSIZE_SIZE_Pos)
+#define USB_DEVICE_PCKSIZE_SIZE(value) ((USB_DEVICE_PCKSIZE_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_SIZE_Pos)))
+#define USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_DEVICE_PCKSIZE) Automatic Zero Length Packet */
+#define USB_DEVICE_PCKSIZE_AUTO_ZLP (0x1ul << USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos)
+#define USB_DEVICE_PCKSIZE_MASK 0xFFFFFFFFul /**< \brief (USB_DEVICE_PCKSIZE) MASK Register */
+
+/* -------- USB_HOST_PCKSIZE : (USB Offset: 0x004) (R/W 32) HOST HOST_DESC_BANK Host Bank, Packet Size -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */
+ uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */
+ uint32_t SIZE:3; /*!< bit: 28..30 Pipe size */
+ uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */
+ } bit; /*!< Structure used for bit access */
+ uint32_t reg; /*!< Type used for register access */
+} USB_HOST_PCKSIZE_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_PCKSIZE_OFFSET 0x004 /**< \brief (USB_HOST_PCKSIZE offset) HOST_DESC_BANK Host Bank, Packet Size */
+
+#define USB_HOST_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_HOST_PCKSIZE) Byte Count */
+#define USB_HOST_PCKSIZE_BYTE_COUNT_Msk (0x3FFFul << USB_HOST_PCKSIZE_BYTE_COUNT_Pos)
+#define USB_HOST_PCKSIZE_BYTE_COUNT(value) ((USB_HOST_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_HOST_PCKSIZE_BYTE_COUNT_Pos)))
+#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_HOST_PCKSIZE) Multi Packet In or Out size */
+#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Msk (0x3FFFul << USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos)
+#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE(value) ((USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos)))
+#define USB_HOST_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_HOST_PCKSIZE) Pipe size */
+#define USB_HOST_PCKSIZE_SIZE_Msk (0x7ul << USB_HOST_PCKSIZE_SIZE_Pos)
+#define USB_HOST_PCKSIZE_SIZE(value) ((USB_HOST_PCKSIZE_SIZE_Msk & ((value) << USB_HOST_PCKSIZE_SIZE_Pos)))
+#define USB_HOST_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_HOST_PCKSIZE) Automatic Zero Length Packet */
+#define USB_HOST_PCKSIZE_AUTO_ZLP (0x1ul << USB_HOST_PCKSIZE_AUTO_ZLP_Pos)
+#define USB_HOST_PCKSIZE_MASK 0xFFFFFFFFul /**< \brief (USB_HOST_PCKSIZE) MASK Register */
+
+/* -------- USB_DEVICE_EXTREG : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE_DESC_BANK Endpoint Bank, Extended -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */
+ uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */
+ uint16_t :1; /*!< bit: 15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_DEVICE_EXTREG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_EXTREG_OFFSET 0x008 /**< \brief (USB_DEVICE_EXTREG offset) DEVICE_DESC_BANK Endpoint Bank, Extended */
+
+#define USB_DEVICE_EXTREG_SUBPID_Pos 0 /**< \brief (USB_DEVICE_EXTREG) SUBPID field send with extended token */
+#define USB_DEVICE_EXTREG_SUBPID_Msk (0xFul << USB_DEVICE_EXTREG_SUBPID_Pos)
+#define USB_DEVICE_EXTREG_SUBPID(value) ((USB_DEVICE_EXTREG_SUBPID_Msk & ((value) << USB_DEVICE_EXTREG_SUBPID_Pos)))
+#define USB_DEVICE_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_DEVICE_EXTREG) Variable field send with extended token */
+#define USB_DEVICE_EXTREG_VARIABLE_Msk (0x7FFul << USB_DEVICE_EXTREG_VARIABLE_Pos)
+#define USB_DEVICE_EXTREG_VARIABLE(value) ((USB_DEVICE_EXTREG_VARIABLE_Msk & ((value) << USB_DEVICE_EXTREG_VARIABLE_Pos)))
+#define USB_DEVICE_EXTREG_MASK 0x7FFFul /**< \brief (USB_DEVICE_EXTREG) MASK Register */
+
+/* -------- USB_HOST_EXTREG : (USB Offset: 0x008) (R/W 16) HOST HOST_DESC_BANK Host Bank, Extended -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */
+ uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */
+ uint16_t :1; /*!< bit: 15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_EXTREG_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_EXTREG_OFFSET 0x008 /**< \brief (USB_HOST_EXTREG offset) HOST_DESC_BANK Host Bank, Extended */
+
+#define USB_HOST_EXTREG_SUBPID_Pos 0 /**< \brief (USB_HOST_EXTREG) SUBPID field send with extended token */
+#define USB_HOST_EXTREG_SUBPID_Msk (0xFul << USB_HOST_EXTREG_SUBPID_Pos)
+#define USB_HOST_EXTREG_SUBPID(value) ((USB_HOST_EXTREG_SUBPID_Msk & ((value) << USB_HOST_EXTREG_SUBPID_Pos)))
+#define USB_HOST_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_HOST_EXTREG) Variable field send with extended token */
+#define USB_HOST_EXTREG_VARIABLE_Msk (0x7FFul << USB_HOST_EXTREG_VARIABLE_Pos)
+#define USB_HOST_EXTREG_VARIABLE(value) ((USB_HOST_EXTREG_VARIABLE_Msk & ((value) << USB_HOST_EXTREG_VARIABLE_Pos)))
+#define USB_HOST_EXTREG_MASK 0x7FFFul /**< \brief (USB_HOST_EXTREG) MASK Register */
+
+/* -------- USB_DEVICE_STATUS_BK : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE_DESC_BANK Enpoint Bank, Status of Bank -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */
+ uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_DEVICE_STATUS_BK_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_DEVICE_STATUS_BK_OFFSET 0x00A /**< \brief (USB_DEVICE_STATUS_BK offset) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
+
+#define USB_DEVICE_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_DEVICE_STATUS_BK) CRC Error Status */
+#define USB_DEVICE_STATUS_BK_CRCERR (0x1ul << USB_DEVICE_STATUS_BK_CRCERR_Pos)
+#define USB_DEVICE_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_DEVICE_STATUS_BK) Error Flow Status */
+#define USB_DEVICE_STATUS_BK_ERRORFLOW (0x1ul << USB_DEVICE_STATUS_BK_ERRORFLOW_Pos)
+#define USB_DEVICE_STATUS_BK_MASK 0x03ul /**< \brief (USB_DEVICE_STATUS_BK) MASK Register */
+
+/* -------- USB_HOST_STATUS_BK : (USB Offset: 0x00A) (R/W 8) HOST HOST_DESC_BANK Host Bank, Status of Bank -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */
+ uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */
+ uint8_t :6; /*!< bit: 2.. 7 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint8_t reg; /*!< Type used for register access */
+} USB_HOST_STATUS_BK_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_STATUS_BK_OFFSET 0x00A /**< \brief (USB_HOST_STATUS_BK offset) HOST_DESC_BANK Host Bank, Status of Bank */
+
+#define USB_HOST_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_HOST_STATUS_BK) CRC Error Status */
+#define USB_HOST_STATUS_BK_CRCERR (0x1ul << USB_HOST_STATUS_BK_CRCERR_Pos)
+#define USB_HOST_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_HOST_STATUS_BK) Error Flow Status */
+#define USB_HOST_STATUS_BK_ERRORFLOW (0x1ul << USB_HOST_STATUS_BK_ERRORFLOW_Pos)
+#define USB_HOST_STATUS_BK_MASK 0x03ul /**< \brief (USB_HOST_STATUS_BK) MASK Register */
+
+/* -------- USB_HOST_CTRL_PIPE : (USB Offset: 0x00C) (R/W 16) HOST HOST_DESC_BANK Host Bank, Host Control Pipe -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t PDADDR:7; /*!< bit: 0.. 6 Pipe Device Adress */
+ uint16_t :1; /*!< bit: 7 Reserved */
+ uint16_t PEPNUM:4; /*!< bit: 8..11 Pipe Endpoint Number */
+ uint16_t PERMAX:4; /*!< bit: 12..15 Pipe Error Max Number */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_CTRL_PIPE_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_CTRL_PIPE_OFFSET 0x00C /**< \brief (USB_HOST_CTRL_PIPE offset) HOST_DESC_BANK Host Bank, Host Control Pipe */
+#define USB_HOST_CTRL_PIPE_RESETVALUE 0x0000ul /**< \brief (USB_HOST_CTRL_PIPE reset_value) HOST_DESC_BANK Host Bank, Host Control Pipe */
+
+#define USB_HOST_CTRL_PIPE_PDADDR_Pos 0 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Device Adress */
+#define USB_HOST_CTRL_PIPE_PDADDR_Msk (0x7Ful << USB_HOST_CTRL_PIPE_PDADDR_Pos)
+#define USB_HOST_CTRL_PIPE_PDADDR(value) ((USB_HOST_CTRL_PIPE_PDADDR_Msk & ((value) << USB_HOST_CTRL_PIPE_PDADDR_Pos)))
+#define USB_HOST_CTRL_PIPE_PEPNUM_Pos 8 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Endpoint Number */
+#define USB_HOST_CTRL_PIPE_PEPNUM_Msk (0xFul << USB_HOST_CTRL_PIPE_PEPNUM_Pos)
+#define USB_HOST_CTRL_PIPE_PEPNUM(value) ((USB_HOST_CTRL_PIPE_PEPNUM_Msk & ((value) << USB_HOST_CTRL_PIPE_PEPNUM_Pos)))
+#define USB_HOST_CTRL_PIPE_PERMAX_Pos 12 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Error Max Number */
+#define USB_HOST_CTRL_PIPE_PERMAX_Msk (0xFul << USB_HOST_CTRL_PIPE_PERMAX_Pos)
+#define USB_HOST_CTRL_PIPE_PERMAX(value) ((USB_HOST_CTRL_PIPE_PERMAX_Msk & ((value) << USB_HOST_CTRL_PIPE_PERMAX_Pos)))
+#define USB_HOST_CTRL_PIPE_MASK 0xFF7Ful /**< \brief (USB_HOST_CTRL_PIPE) MASK Register */
+
+/* -------- USB_HOST_STATUS_PIPE : (USB Offset: 0x00E) (R/W 16) HOST HOST_DESC_BANK Host Bank, Host Status Pipe -------- */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ struct {
+ uint16_t DTGLER:1; /*!< bit: 0 Data Toggle Error */
+ uint16_t DAPIDER:1; /*!< bit: 1 Data PID Error */
+ uint16_t PIDER:1; /*!< bit: 2 PID Error */
+ uint16_t TOUTER:1; /*!< bit: 3 Time Out Error */
+ uint16_t CRC16ER:1; /*!< bit: 4 CRC16 Error */
+ uint16_t ERCNT:3; /*!< bit: 5.. 7 Pipe Error Count */
+ uint16_t :8; /*!< bit: 8..15 Reserved */
+ } bit; /*!< Structure used for bit access */
+ uint16_t reg; /*!< Type used for register access */
+} USB_HOST_STATUS_PIPE_Type;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+#define USB_HOST_STATUS_PIPE_OFFSET 0x00E /**< \brief (USB_HOST_STATUS_PIPE offset) HOST_DESC_BANK Host Bank, Host Status Pipe */
+
+#define USB_HOST_STATUS_PIPE_DTGLER_Pos 0 /**< \brief (USB_HOST_STATUS_PIPE) Data Toggle Error */
+#define USB_HOST_STATUS_PIPE_DTGLER (0x1ul << USB_HOST_STATUS_PIPE_DTGLER_Pos)
+#define USB_HOST_STATUS_PIPE_DAPIDER_Pos 1 /**< \brief (USB_HOST_STATUS_PIPE) Data PID Error */
+#define USB_HOST_STATUS_PIPE_DAPIDER (0x1ul << USB_HOST_STATUS_PIPE_DAPIDER_Pos)
+#define USB_HOST_STATUS_PIPE_PIDER_Pos 2 /**< \brief (USB_HOST_STATUS_PIPE) PID Error */
+#define USB_HOST_STATUS_PIPE_PIDER (0x1ul << USB_HOST_STATUS_PIPE_PIDER_Pos)
+#define USB_HOST_STATUS_PIPE_TOUTER_Pos 3 /**< \brief (USB_HOST_STATUS_PIPE) Time Out Error */
+#define USB_HOST_STATUS_PIPE_TOUTER (0x1ul << USB_HOST_STATUS_PIPE_TOUTER_Pos)
+#define USB_HOST_STATUS_PIPE_CRC16ER_Pos 4 /**< \brief (USB_HOST_STATUS_PIPE) CRC16 Error */
+#define USB_HOST_STATUS_PIPE_CRC16ER (0x1ul << USB_HOST_STATUS_PIPE_CRC16ER_Pos)
+#define USB_HOST_STATUS_PIPE_ERCNT_Pos 5 /**< \brief (USB_HOST_STATUS_PIPE) Pipe Error Count */
+#define USB_HOST_STATUS_PIPE_ERCNT_Msk (0x7ul << USB_HOST_STATUS_PIPE_ERCNT_Pos)
+#define USB_HOST_STATUS_PIPE_ERCNT(value) ((USB_HOST_STATUS_PIPE_ERCNT_Msk & ((value) << USB_HOST_STATUS_PIPE_ERCNT_Pos)))
+#define USB_HOST_STATUS_PIPE_MASK 0x00FFul /**< \brief (USB_HOST_STATUS_PIPE) MASK Register */
+
+/** \brief UsbDeviceDescBank SRAM registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct {
+ __IO USB_DEVICE_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
+ __IO USB_DEVICE_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
+ __IO USB_DEVICE_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) DEVICE_DESC_BANK Endpoint Bank, Extended */
+ __IO USB_DEVICE_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
+ RoReg8 Reserved1[0x5];
+} UsbDeviceDescBank;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief UsbHostDescBank SRAM registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct {
+ __IO USB_HOST_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) HOST_DESC_BANK Host Bank, Adress of Data Buffer */
+ __IO USB_HOST_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) HOST_DESC_BANK Host Bank, Packet Size */
+ __IO USB_HOST_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) HOST_DESC_BANK Host Bank, Extended */
+ __IO USB_HOST_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) HOST_DESC_BANK Host Bank, Status of Bank */
+ RoReg8 Reserved1[0x1];
+ __IO USB_HOST_CTRL_PIPE_Type CTRL_PIPE; /**< \brief Offset: 0x00C (R/W 16) HOST_DESC_BANK Host Bank, Host Control Pipe */
+ __IO USB_HOST_STATUS_PIPE_Type STATUS_PIPE; /**< \brief Offset: 0x00E (R/W 16) HOST_DESC_BANK Host Bank, Host Status Pipe */
+} UsbHostDescBank;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief UsbDeviceEndpoint hardware registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct {
+ __IO USB_DEVICE_EPCFG_Type EPCFG; /**< \brief Offset: 0x000 (R/W 8) DEVICE_ENDPOINT End Point Configuration */
+ RoReg8 Reserved1[0x3];
+ __O USB_DEVICE_EPSTATUSCLR_Type EPSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Clear */
+ __O USB_DEVICE_EPSTATUSSET_Type EPSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Set */
+ __I USB_DEVICE_EPSTATUS_Type EPSTATUS; /**< \brief Offset: 0x006 (R/ 8) DEVICE_ENDPOINT End Point Pipe Status */
+ __IO USB_DEVICE_EPINTFLAG_Type EPINTFLAG; /**< \brief Offset: 0x007 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Flag */
+ __IO USB_DEVICE_EPINTENCLR_Type EPINTENCLR; /**< \brief Offset: 0x008 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
+ __IO USB_DEVICE_EPINTENSET_Type EPINTENSET; /**< \brief Offset: 0x009 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Set Flag */
+ RoReg8 Reserved2[0x16];
+} UsbDeviceEndpoint;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief UsbHostPipe hardware registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct {
+ __IO USB_HOST_PCFG_Type PCFG; /**< \brief Offset: 0x000 (R/W 8) HOST_PIPE End Point Configuration */
+ RoReg8 Reserved1[0x2];
+ __IO USB_HOST_BINTERVAL_Type BINTERVAL; /**< \brief Offset: 0x003 (R/W 8) HOST_PIPE Bus Access Period of Pipe */
+ __O USB_HOST_PSTATUSCLR_Type PSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) HOST_PIPE End Point Pipe Status Clear */
+ __O USB_HOST_PSTATUSSET_Type PSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) HOST_PIPE End Point Pipe Status Set */
+ __I USB_HOST_PSTATUS_Type PSTATUS; /**< \brief Offset: 0x006 (R/ 8) HOST_PIPE End Point Pipe Status */
+ __IO USB_HOST_PINTFLAG_Type PINTFLAG; /**< \brief Offset: 0x007 (R/W 8) HOST_PIPE Pipe Interrupt Flag */
+ __IO USB_HOST_PINTENCLR_Type PINTENCLR; /**< \brief Offset: 0x008 (R/W 8) HOST_PIPE Pipe Interrupt Flag Clear */
+ __IO USB_HOST_PINTENSET_Type PINTENSET; /**< \brief Offset: 0x009 (R/W 8) HOST_PIPE Pipe Interrupt Flag Set */
+ RoReg8 Reserved2[0x16];
+} UsbHostPipe;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief USB_DEVICE APB hardware registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct { /* USB is Device */
+ __IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */
+ RoReg8 Reserved1[0x1];
+ __I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */
+ __IO USB_QOSCTRL_Type QOSCTRL; /**< \brief Offset: 0x003 (R/W 8) USB Quality Of Service */
+ RoReg8 Reserved2[0x4];
+ __IO USB_DEVICE_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) DEVICE Control B */
+ __IO USB_DEVICE_DADD_Type DADD; /**< \brief Offset: 0x00A (R/W 8) DEVICE Device Address */
+ RoReg8 Reserved3[0x1];
+ __I USB_DEVICE_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/ 8) DEVICE Status */
+ __I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */
+ RoReg8 Reserved4[0x2];
+ __I USB_DEVICE_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/ 16) DEVICE Device Frame Number */
+ RoReg8 Reserved5[0x2];
+ __IO USB_DEVICE_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) DEVICE Device Interrupt Enable Clear */
+ RoReg8 Reserved6[0x2];
+ __IO USB_DEVICE_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) DEVICE Device Interrupt Enable Set */
+ RoReg8 Reserved7[0x2];
+ __IO USB_DEVICE_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) DEVICE Device Interrupt Flag */
+ RoReg8 Reserved8[0x2];
+ __I USB_DEVICE_EPINTSMRY_Type EPINTSMRY; /**< \brief Offset: 0x020 (R/ 16) DEVICE End Point Interrupt Summary */
+ RoReg8 Reserved9[0x2];
+ __IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */
+ __IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */
+ RoReg8 Reserved10[0xD6];
+ UsbDeviceEndpoint DeviceEndpoint[8]; /**< \brief Offset: 0x100 UsbDeviceEndpoint groups [EPT_NUM] */
+} UsbDevice;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief USB_HOST hardware registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct { /* USB is Host */
+ __IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */
+ RoReg8 Reserved1[0x1];
+ __I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */
+ __IO USB_QOSCTRL_Type QOSCTRL; /**< \brief Offset: 0x003 (R/W 8) USB Quality Of Service */
+ RoReg8 Reserved2[0x4];
+ __IO USB_HOST_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) HOST Control B */
+ __IO USB_HOST_HSOFC_Type HSOFC; /**< \brief Offset: 0x00A (R/W 8) HOST Host Start Of Frame Control */
+ RoReg8 Reserved3[0x1];
+ __IO USB_HOST_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/W 8) HOST Status */
+ __I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */
+ RoReg8 Reserved4[0x2];
+ __IO USB_HOST_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/W 16) HOST Host Frame Number */
+ __I USB_HOST_FLENHIGH_Type FLENHIGH; /**< \brief Offset: 0x012 (R/ 8) HOST Host Frame Length */
+ RoReg8 Reserved5[0x1];
+ __IO USB_HOST_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) HOST Host Interrupt Enable Clear */
+ RoReg8 Reserved6[0x2];
+ __IO USB_HOST_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) HOST Host Interrupt Enable Set */
+ RoReg8 Reserved7[0x2];
+ __IO USB_HOST_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) HOST Host Interrupt Flag */
+ RoReg8 Reserved8[0x2];
+ __I USB_HOST_PINTSMRY_Type PINTSMRY; /**< \brief Offset: 0x020 (R/ 16) HOST Pipe Interrupt Summary */
+ RoReg8 Reserved9[0x2];
+ __IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */
+ __IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */
+ RoReg8 Reserved10[0xD6];
+ UsbHostPipe HostPipe[8]; /**< \brief Offset: 0x100 UsbHostPipe groups [EPT_NUM*HOST_IMPLEMENTED] */
+} UsbHost;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief USB_DEVICE Descriptor SRAM registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct { /* USB is Device */
+ UsbDeviceDescBank DeviceDescBank[2]; /**< \brief Offset: 0x000 UsbDeviceDescBank groups */
+} UsbDeviceDescriptor;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/** \brief USB_HOST Descriptor SRAM registers */
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef struct { /* USB is Host */
+ UsbHostDescBank HostDescBank[2]; /**< \brief Offset: 0x000 UsbHostDescBank groups [2*HOST_IMPLEMENTED] */
+} UsbHostDescriptor;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+#define SECTION_USB_DESCRIPTOR
+
+#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+typedef union {
+ UsbDevice DEVICE; /**< \brief Offset: 0x000 USB is Device */
+ UsbHost HOST; /**< \brief Offset: 0x000 USB is Host */
+} Usb;
+#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/*@}*/
+
+#endif /* _SAMD21_USB_COMPONENT_ */