Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.h@121:672067c3ada4, 2016-04-14 (annotated)
- Committer:
- elijahorr
- Date:
- Thu Apr 14 07:28:54 2016 +0000
- Revision:
- 121:672067c3ada4
- Parent:
- 110:165afa46840b
.
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| emilmont | 77:869cf507173a | 1 | /** |
| emilmont | 77:869cf507173a | 2 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 3 | * @file stm32f4xx_hal_uart.h |
| emilmont | 77:869cf507173a | 4 | * @author MCD Application Team |
| Kojto | 110:165afa46840b | 5 | * @version V1.4.1 |
| Kojto | 110:165afa46840b | 6 | * @date 09-October-2015 |
| emilmont | 77:869cf507173a | 7 | * @brief Header file of UART HAL module. |
| emilmont | 77:869cf507173a | 8 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 9 | * @attention |
| emilmont | 77:869cf507173a | 10 | * |
| Kojto | 99:dbbf35b96557 | 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
| emilmont | 77:869cf507173a | 12 | * |
| emilmont | 77:869cf507173a | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| emilmont | 77:869cf507173a | 14 | * are permitted provided that the following conditions are met: |
| emilmont | 77:869cf507173a | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| emilmont | 77:869cf507173a | 16 | * this list of conditions and the following disclaimer. |
| emilmont | 77:869cf507173a | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| emilmont | 77:869cf507173a | 18 | * this list of conditions and the following disclaimer in the documentation |
| emilmont | 77:869cf507173a | 19 | * and/or other materials provided with the distribution. |
| emilmont | 77:869cf507173a | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| emilmont | 77:869cf507173a | 21 | * may be used to endorse or promote products derived from this software |
| emilmont | 77:869cf507173a | 22 | * without specific prior written permission. |
| emilmont | 77:869cf507173a | 23 | * |
| emilmont | 77:869cf507173a | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| emilmont | 77:869cf507173a | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| emilmont | 77:869cf507173a | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| emilmont | 77:869cf507173a | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| emilmont | 77:869cf507173a | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| emilmont | 77:869cf507173a | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| emilmont | 77:869cf507173a | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| emilmont | 77:869cf507173a | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| emilmont | 77:869cf507173a | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| emilmont | 77:869cf507173a | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| emilmont | 77:869cf507173a | 34 | * |
| emilmont | 77:869cf507173a | 35 | ****************************************************************************** |
| emilmont | 77:869cf507173a | 36 | */ |
| emilmont | 77:869cf507173a | 37 | |
| emilmont | 77:869cf507173a | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| emilmont | 77:869cf507173a | 39 | #ifndef __STM32F4xx_HAL_UART_H |
| emilmont | 77:869cf507173a | 40 | #define __STM32F4xx_HAL_UART_H |
| emilmont | 77:869cf507173a | 41 | |
| emilmont | 77:869cf507173a | 42 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 43 | extern "C" { |
| emilmont | 77:869cf507173a | 44 | #endif |
| emilmont | 77:869cf507173a | 45 | |
| emilmont | 77:869cf507173a | 46 | /* Includes ------------------------------------------------------------------*/ |
| emilmont | 77:869cf507173a | 47 | #include "stm32f4xx_hal_def.h" |
| emilmont | 77:869cf507173a | 48 | |
| emilmont | 77:869cf507173a | 49 | /** @addtogroup STM32F4xx_HAL_Driver |
| emilmont | 77:869cf507173a | 50 | * @{ |
| emilmont | 77:869cf507173a | 51 | */ |
| emilmont | 77:869cf507173a | 52 | |
| emilmont | 77:869cf507173a | 53 | /** @addtogroup UART |
| emilmont | 77:869cf507173a | 54 | * @{ |
| emilmont | 77:869cf507173a | 55 | */ |
| emilmont | 77:869cf507173a | 56 | |
| emilmont | 77:869cf507173a | 57 | /* Exported types ------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 58 | /** @defgroup UART_Exported_Types UART Exported Types |
| Kojto | 99:dbbf35b96557 | 59 | * @{ |
| Kojto | 99:dbbf35b96557 | 60 | */ |
| emilmont | 77:869cf507173a | 61 | |
| emilmont | 77:869cf507173a | 62 | /** |
| emilmont | 77:869cf507173a | 63 | * @brief UART Init Structure definition |
| emilmont | 77:869cf507173a | 64 | */ |
| emilmont | 77:869cf507173a | 65 | typedef struct |
| emilmont | 77:869cf507173a | 66 | { |
| emilmont | 77:869cf507173a | 67 | uint32_t BaudRate; /*!< This member configures the UART communication baud rate. |
| emilmont | 77:869cf507173a | 68 | The baud rate is computed using the following formula: |
| emilmont | 77:869cf507173a | 69 | - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) |
| emilmont | 77:869cf507173a | 70 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 |
| emilmont | 77:869cf507173a | 71 | Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ |
| emilmont | 77:869cf507173a | 72 | |
| emilmont | 77:869cf507173a | 73 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| emilmont | 77:869cf507173a | 74 | This parameter can be a value of @ref UART_Word_Length */ |
| emilmont | 77:869cf507173a | 75 | |
| emilmont | 77:869cf507173a | 76 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
| emilmont | 77:869cf507173a | 77 | This parameter can be a value of @ref UART_Stop_Bits */ |
| emilmont | 77:869cf507173a | 78 | |
| emilmont | 77:869cf507173a | 79 | uint32_t Parity; /*!< Specifies the parity mode. |
| emilmont | 77:869cf507173a | 80 | This parameter can be a value of @ref UART_Parity |
| emilmont | 77:869cf507173a | 81 | @note When parity is enabled, the computed parity is inserted |
| emilmont | 77:869cf507173a | 82 | at the MSB position of the transmitted data (9th bit when |
| emilmont | 77:869cf507173a | 83 | the word length is set to 9 data bits; 8th bit when the |
| emilmont | 77:869cf507173a | 84 | word length is set to 8 data bits). */ |
| emilmont | 77:869cf507173a | 85 | |
| Kojto | 99:dbbf35b96557 | 86 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
| emilmont | 77:869cf507173a | 87 | This parameter can be a value of @ref UART_Mode */ |
| emilmont | 77:869cf507173a | 88 | |
| Kojto | 99:dbbf35b96557 | 89 | uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled |
| emilmont | 77:869cf507173a | 90 | or disabled. |
| emilmont | 77:869cf507173a | 91 | This parameter can be a value of @ref UART_Hardware_Flow_Control */ |
| emilmont | 77:869cf507173a | 92 | |
| Kojto | 99:dbbf35b96557 | 93 | uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). |
| emilmont | 77:869cf507173a | 94 | This parameter can be a value of @ref UART_Over_Sampling */ |
| emilmont | 77:869cf507173a | 95 | }UART_InitTypeDef; |
| emilmont | 77:869cf507173a | 96 | |
| emilmont | 77:869cf507173a | 97 | /** |
| emilmont | 77:869cf507173a | 98 | * @brief HAL UART State structures definition |
| emilmont | 77:869cf507173a | 99 | */ |
| emilmont | 77:869cf507173a | 100 | typedef enum |
| emilmont | 77:869cf507173a | 101 | { |
| emilmont | 77:869cf507173a | 102 | HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ |
| emilmont | 77:869cf507173a | 103 | HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| emilmont | 77:869cf507173a | 104 | HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| emilmont | 77:869cf507173a | 105 | HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| emilmont | 77:869cf507173a | 106 | HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 107 | HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| emilmont | 77:869cf507173a | 108 | HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| emilmont | 77:869cf507173a | 109 | HAL_UART_STATE_ERROR = 0x04 /*!< Error */ |
| emilmont | 77:869cf507173a | 110 | }HAL_UART_StateTypeDef; |
| emilmont | 77:869cf507173a | 111 | |
| emilmont | 77:869cf507173a | 112 | /** |
| emilmont | 77:869cf507173a | 113 | * @brief UART handle Structure definition |
| emilmont | 77:869cf507173a | 114 | */ |
| emilmont | 77:869cf507173a | 115 | typedef struct |
| emilmont | 77:869cf507173a | 116 | { |
| Kojto | 99:dbbf35b96557 | 117 | USART_TypeDef *Instance; /*!< UART registers base address */ |
| emilmont | 77:869cf507173a | 118 | |
| Kojto | 99:dbbf35b96557 | 119 | UART_InitTypeDef Init; /*!< UART communication parameters */ |
| emilmont | 77:869cf507173a | 120 | |
| Kojto | 99:dbbf35b96557 | 121 | uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ |
| emilmont | 77:869cf507173a | 122 | |
| Kojto | 99:dbbf35b96557 | 123 | uint16_t TxXferSize; /*!< UART Tx Transfer size */ |
| emilmont | 77:869cf507173a | 124 | |
| Kojto | 99:dbbf35b96557 | 125 | uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ |
| emilmont | 77:869cf507173a | 126 | |
| Kojto | 99:dbbf35b96557 | 127 | uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ |
| emilmont | 77:869cf507173a | 128 | |
| Kojto | 99:dbbf35b96557 | 129 | uint16_t RxXferSize; /*!< UART Rx Transfer size */ |
| emilmont | 77:869cf507173a | 130 | |
| Kojto | 99:dbbf35b96557 | 131 | uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ |
| emilmont | 77:869cf507173a | 132 | |
| Kojto | 99:dbbf35b96557 | 133 | DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 134 | |
| Kojto | 99:dbbf35b96557 | 135 | DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ |
| emilmont | 77:869cf507173a | 136 | |
| Kojto | 99:dbbf35b96557 | 137 | HAL_LockTypeDef Lock; /*!< Locking object */ |
| emilmont | 77:869cf507173a | 138 | |
| Kojto | 99:dbbf35b96557 | 139 | __IO HAL_UART_StateTypeDef State; /*!< UART communication state */ |
| emilmont | 77:869cf507173a | 140 | |
| Kojto | 99:dbbf35b96557 | 141 | __IO uint32_t ErrorCode; /*!< UART Error code */ |
| Kojto | 99:dbbf35b96557 | 142 | |
| emilmont | 77:869cf507173a | 143 | }UART_HandleTypeDef; |
| Kojto | 99:dbbf35b96557 | 144 | /** |
| Kojto | 99:dbbf35b96557 | 145 | * @} |
| Kojto | 99:dbbf35b96557 | 146 | */ |
| emilmont | 77:869cf507173a | 147 | |
| emilmont | 77:869cf507173a | 148 | /* Exported constants --------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 149 | /** @defgroup UART_Exported_Constants UART Exported constants |
| emilmont | 77:869cf507173a | 150 | * @{ |
| emilmont | 77:869cf507173a | 151 | */ |
| Kojto | 99:dbbf35b96557 | 152 | |
| Kojto | 99:dbbf35b96557 | 153 | /** @defgroup UART_Error_Code UART Error Code |
| Kojto | 99:dbbf35b96557 | 154 | * @brief UART Error Code |
| Kojto | 99:dbbf35b96557 | 155 | * @{ |
| Kojto | 99:dbbf35b96557 | 156 | */ |
| Kojto | 99:dbbf35b96557 | 157 | #define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ |
| Kojto | 99:dbbf35b96557 | 158 | #define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ |
| Kojto | 99:dbbf35b96557 | 159 | #define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ |
| Kojto | 99:dbbf35b96557 | 160 | #define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ |
| Kojto | 99:dbbf35b96557 | 161 | #define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ |
| Kojto | 99:dbbf35b96557 | 162 | #define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ |
| Kojto | 99:dbbf35b96557 | 163 | /** |
| Kojto | 99:dbbf35b96557 | 164 | * @} |
| Kojto | 99:dbbf35b96557 | 165 | */ |
| Kojto | 99:dbbf35b96557 | 166 | |
| Kojto | 99:dbbf35b96557 | 167 | /** @defgroup UART_Word_Length UART Word Length |
| emilmont | 77:869cf507173a | 168 | * @{ |
| emilmont | 77:869cf507173a | 169 | */ |
| emilmont | 77:869cf507173a | 170 | #define UART_WORDLENGTH_8B ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 171 | #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
| emilmont | 77:869cf507173a | 172 | /** |
| emilmont | 77:869cf507173a | 173 | * @} |
| emilmont | 77:869cf507173a | 174 | */ |
| emilmont | 77:869cf507173a | 175 | |
| Kojto | 99:dbbf35b96557 | 176 | /** @defgroup UART_Stop_Bits UART Number of Stop Bits |
| emilmont | 77:869cf507173a | 177 | * @{ |
| emilmont | 77:869cf507173a | 178 | */ |
| emilmont | 77:869cf507173a | 179 | #define UART_STOPBITS_1 ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 180 | #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) |
| emilmont | 77:869cf507173a | 181 | /** |
| emilmont | 77:869cf507173a | 182 | * @} |
| emilmont | 77:869cf507173a | 183 | */ |
| emilmont | 77:869cf507173a | 184 | |
| Kojto | 99:dbbf35b96557 | 185 | /** @defgroup UART_Parity UART Parity |
| emilmont | 77:869cf507173a | 186 | * @{ |
| emilmont | 77:869cf507173a | 187 | */ |
| emilmont | 77:869cf507173a | 188 | #define UART_PARITY_NONE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 189 | #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| emilmont | 77:869cf507173a | 190 | #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| emilmont | 77:869cf507173a | 191 | /** |
| emilmont | 77:869cf507173a | 192 | * @} |
| emilmont | 77:869cf507173a | 193 | */ |
| emilmont | 77:869cf507173a | 194 | |
| Kojto | 99:dbbf35b96557 | 195 | /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control |
| emilmont | 77:869cf507173a | 196 | * @{ |
| emilmont | 77:869cf507173a | 197 | */ |
| emilmont | 77:869cf507173a | 198 | #define UART_HWCONTROL_NONE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 199 | #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) |
| emilmont | 77:869cf507173a | 200 | #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) |
| emilmont | 77:869cf507173a | 201 | #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) |
| emilmont | 77:869cf507173a | 202 | /** |
| emilmont | 77:869cf507173a | 203 | * @} |
| emilmont | 77:869cf507173a | 204 | */ |
| emilmont | 77:869cf507173a | 205 | |
| Kojto | 99:dbbf35b96557 | 206 | /** @defgroup UART_Mode UART Transfer Mode |
| emilmont | 77:869cf507173a | 207 | * @{ |
| emilmont | 77:869cf507173a | 208 | */ |
| emilmont | 77:869cf507173a | 209 | #define UART_MODE_RX ((uint32_t)USART_CR1_RE) |
| emilmont | 77:869cf507173a | 210 | #define UART_MODE_TX ((uint32_t)USART_CR1_TE) |
| emilmont | 77:869cf507173a | 211 | #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| emilmont | 77:869cf507173a | 212 | /** |
| emilmont | 77:869cf507173a | 213 | * @} |
| emilmont | 77:869cf507173a | 214 | */ |
| emilmont | 77:869cf507173a | 215 | |
| Kojto | 99:dbbf35b96557 | 216 | /** @defgroup UART_State UART State |
| emilmont | 77:869cf507173a | 217 | * @{ |
| emilmont | 77:869cf507173a | 218 | */ |
| emilmont | 77:869cf507173a | 219 | #define UART_STATE_DISABLE ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 220 | #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) |
| emilmont | 77:869cf507173a | 221 | /** |
| emilmont | 77:869cf507173a | 222 | * @} |
| emilmont | 77:869cf507173a | 223 | */ |
| emilmont | 77:869cf507173a | 224 | |
| Kojto | 99:dbbf35b96557 | 225 | /** @defgroup UART_Over_Sampling UART Over Sampling |
| emilmont | 77:869cf507173a | 226 | * @{ |
| emilmont | 77:869cf507173a | 227 | */ |
| emilmont | 77:869cf507173a | 228 | #define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 229 | #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) |
| emilmont | 77:869cf507173a | 230 | /** |
| emilmont | 77:869cf507173a | 231 | * @} |
| emilmont | 77:869cf507173a | 232 | */ |
| emilmont | 77:869cf507173a | 233 | |
| Kojto | 99:dbbf35b96557 | 234 | /** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length |
| emilmont | 77:869cf507173a | 235 | * @{ |
| emilmont | 77:869cf507173a | 236 | */ |
| emilmont | 77:869cf507173a | 237 | #define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) |
| emilmont | 77:869cf507173a | 238 | #define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020) |
| emilmont | 77:869cf507173a | 239 | /** |
| emilmont | 77:869cf507173a | 240 | * @} |
| emilmont | 77:869cf507173a | 241 | */ |
| emilmont | 77:869cf507173a | 242 | |
| Kojto | 99:dbbf35b96557 | 243 | /** @defgroup UART_WakeUp_functions UART Wakeup Functions |
| emilmont | 77:869cf507173a | 244 | * @{ |
| emilmont | 77:869cf507173a | 245 | */ |
| Kojto | 99:dbbf35b96557 | 246 | #define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) |
| Kojto | 99:dbbf35b96557 | 247 | #define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800) |
| emilmont | 77:869cf507173a | 248 | /** |
| emilmont | 77:869cf507173a | 249 | * @} |
| emilmont | 77:869cf507173a | 250 | */ |
| emilmont | 77:869cf507173a | 251 | |
| Kojto | 99:dbbf35b96557 | 252 | /** @defgroup UART_Flags UART FLags |
| emilmont | 77:869cf507173a | 253 | * Elements values convention: 0xXXXX |
| emilmont | 77:869cf507173a | 254 | * - 0xXXXX : Flag mask in the SR register |
| emilmont | 77:869cf507173a | 255 | * @{ |
| emilmont | 77:869cf507173a | 256 | */ |
| Kojto | 99:dbbf35b96557 | 257 | #define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) |
| Kojto | 99:dbbf35b96557 | 258 | #define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) |
| Kojto | 99:dbbf35b96557 | 259 | #define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) |
| Kojto | 99:dbbf35b96557 | 260 | #define UART_FLAG_TC ((uint32_t)USART_SR_TC) |
| Kojto | 99:dbbf35b96557 | 261 | #define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) |
| Kojto | 99:dbbf35b96557 | 262 | #define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) |
| Kojto | 99:dbbf35b96557 | 263 | #define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) |
| Kojto | 99:dbbf35b96557 | 264 | #define UART_FLAG_NE ((uint32_t)USART_SR_NE) |
| Kojto | 99:dbbf35b96557 | 265 | #define UART_FLAG_FE ((uint32_t)USART_SR_FE) |
| Kojto | 99:dbbf35b96557 | 266 | #define UART_FLAG_PE ((uint32_t)USART_SR_PE) |
| emilmont | 77:869cf507173a | 267 | /** |
| emilmont | 77:869cf507173a | 268 | * @} |
| emilmont | 77:869cf507173a | 269 | */ |
| emilmont | 77:869cf507173a | 270 | |
| Kojto | 99:dbbf35b96557 | 271 | /** @defgroup UART_Interrupt_definition UART Interrupt Definitions |
| emilmont | 77:869cf507173a | 272 | * Elements values convention: 0xY000XXXX |
| Kojto | 99:dbbf35b96557 | 273 | * - XXXX : Interrupt mask (16 bits) in the Y register |
| emilmont | 77:869cf507173a | 274 | * - Y : Interrupt source register (2bits) |
| Kojto | 99:dbbf35b96557 | 275 | * - 0001: CR1 register |
| Kojto | 99:dbbf35b96557 | 276 | * - 0010: CR2 register |
| Kojto | 99:dbbf35b96557 | 277 | * - 0011: CR3 register |
| emilmont | 77:869cf507173a | 278 | * |
| emilmont | 77:869cf507173a | 279 | * @{ |
| Kojto | 99:dbbf35b96557 | 280 | */ |
| emilmont | 77:869cf507173a | 281 | |
| Kojto | 99:dbbf35b96557 | 282 | #define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) |
| Kojto | 99:dbbf35b96557 | 283 | #define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) |
| Kojto | 99:dbbf35b96557 | 284 | #define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) |
| Kojto | 99:dbbf35b96557 | 285 | #define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) |
| Kojto | 99:dbbf35b96557 | 286 | #define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) |
| bogdanm | 85:024bf7f99721 | 287 | |
| Kojto | 99:dbbf35b96557 | 288 | #define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) |
| emilmont | 77:869cf507173a | 289 | |
| Kojto | 99:dbbf35b96557 | 290 | #define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) |
| Kojto | 99:dbbf35b96557 | 291 | #define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) |
| emilmont | 77:869cf507173a | 292 | /** |
| emilmont | 77:869cf507173a | 293 | * @} |
| emilmont | 77:869cf507173a | 294 | */ |
| bogdanm | 85:024bf7f99721 | 295 | |
| emilmont | 77:869cf507173a | 296 | /** |
| emilmont | 77:869cf507173a | 297 | * @} |
| emilmont | 77:869cf507173a | 298 | */ |
| emilmont | 77:869cf507173a | 299 | |
| emilmont | 77:869cf507173a | 300 | /* Exported macro ------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 301 | /** @defgroup UART_Exported_Macros UART Exported Macros |
| Kojto | 99:dbbf35b96557 | 302 | * @{ |
| Kojto | 99:dbbf35b96557 | 303 | */ |
| bogdanm | 85:024bf7f99721 | 304 | |
| bogdanm | 85:024bf7f99721 | 305 | /** @brief Reset UART handle state |
| bogdanm | 85:024bf7f99721 | 306 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 307 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| bogdanm | 85:024bf7f99721 | 308 | * UART peripheral. |
| bogdanm | 85:024bf7f99721 | 309 | * @retval None |
| bogdanm | 85:024bf7f99721 | 310 | */ |
| bogdanm | 85:024bf7f99721 | 311 | #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) |
| bogdanm | 85:024bf7f99721 | 312 | |
| Kojto | 99:dbbf35b96557 | 313 | /** @brief Flushes the UART DR register |
| bogdanm | 85:024bf7f99721 | 314 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 315 | */ |
| bogdanm | 85:024bf7f99721 | 316 | #define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
| bogdanm | 85:024bf7f99721 | 317 | |
| emilmont | 77:869cf507173a | 318 | /** @brief Checks whether the specified UART flag is set or not. |
| emilmont | 77:869cf507173a | 319 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 320 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 321 | * UART peripheral. |
| emilmont | 77:869cf507173a | 322 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 323 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 324 | * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) |
| emilmont | 77:869cf507173a | 325 | * @arg UART_FLAG_LBD: LIN Break detection flag |
| emilmont | 77:869cf507173a | 326 | * @arg UART_FLAG_TXE: Transmit data register empty flag |
| emilmont | 77:869cf507173a | 327 | * @arg UART_FLAG_TC: Transmission Complete flag |
| emilmont | 77:869cf507173a | 328 | * @arg UART_FLAG_RXNE: Receive data register not empty flag |
| emilmont | 77:869cf507173a | 329 | * @arg UART_FLAG_IDLE: Idle Line detection flag |
| Kojto | 99:dbbf35b96557 | 330 | * @arg UART_FLAG_ORE: Overrun Error flag |
| emilmont | 77:869cf507173a | 331 | * @arg UART_FLAG_NE: Noise Error flag |
| emilmont | 77:869cf507173a | 332 | * @arg UART_FLAG_FE: Framing Error flag |
| emilmont | 77:869cf507173a | 333 | * @arg UART_FLAG_PE: Parity Error flag |
| emilmont | 77:869cf507173a | 334 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 335 | */ |
| emilmont | 77:869cf507173a | 336 | |
| emilmont | 77:869cf507173a | 337 | #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
| emilmont | 77:869cf507173a | 338 | |
| emilmont | 77:869cf507173a | 339 | /** @brief Clears the specified UART pending flag. |
| emilmont | 77:869cf507173a | 340 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 341 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 342 | * UART peripheral. |
| emilmont | 77:869cf507173a | 343 | * @param __FLAG__: specifies the flag to check. |
| emilmont | 77:869cf507173a | 344 | * This parameter can be any combination of the following values: |
| emilmont | 77:869cf507173a | 345 | * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). |
| emilmont | 77:869cf507173a | 346 | * @arg UART_FLAG_LBD: LIN Break detection flag. |
| emilmont | 77:869cf507173a | 347 | * @arg UART_FLAG_TC: Transmission Complete flag. |
| emilmont | 77:869cf507173a | 348 | * @arg UART_FLAG_RXNE: Receive data register not empty flag. |
| emilmont | 77:869cf507173a | 349 | * |
| Kojto | 99:dbbf35b96557 | 350 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun |
| emilmont | 77:869cf507173a | 351 | * error) and IDLE (Idle line detected) flags are cleared by software |
| emilmont | 77:869cf507173a | 352 | * sequence: a read operation to USART_SR register followed by a read |
| emilmont | 77:869cf507173a | 353 | * operation to USART_DR register. |
| emilmont | 77:869cf507173a | 354 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
| emilmont | 77:869cf507173a | 355 | * @note TC flag can be also cleared by software sequence: a read operation to |
| emilmont | 77:869cf507173a | 356 | * USART_SR register followed by a write operation to USART_DR register. |
| emilmont | 77:869cf507173a | 357 | * @note TXE flag is cleared only by a write to the USART_DR register. |
| emilmont | 77:869cf507173a | 358 | * |
| emilmont | 77:869cf507173a | 359 | * @retval None |
| emilmont | 77:869cf507173a | 360 | */ |
| Kojto | 90:cb3d968589d8 | 361 | #define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| Kojto | 90:cb3d968589d8 | 362 | |
| Kojto | 90:cb3d968589d8 | 363 | /** @brief Clear the UART PE pending flag. |
| Kojto | 90:cb3d968589d8 | 364 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 365 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 366 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 367 | * @retval None |
| Kojto | 90:cb3d968589d8 | 368 | */ |
| Kojto | 99:dbbf35b96557 | 369 | #define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ |
| Kojto | 99:dbbf35b96557 | 370 | do{ \ |
| Kojto | 99:dbbf35b96557 | 371 | __IO uint32_t tmpreg; \ |
| Kojto | 99:dbbf35b96557 | 372 | tmpreg = (__HANDLE__)->Instance->SR; \ |
| Kojto | 99:dbbf35b96557 | 373 | tmpreg = (__HANDLE__)->Instance->DR; \ |
| Kojto | 99:dbbf35b96557 | 374 | UNUSED(tmpreg); \ |
| Kojto | 99:dbbf35b96557 | 375 | } while(0) |
| Kojto | 99:dbbf35b96557 | 376 | |
| Kojto | 90:cb3d968589d8 | 377 | /** @brief Clear the UART FE pending flag. |
| Kojto | 90:cb3d968589d8 | 378 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 379 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 380 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 381 | * @retval None |
| Kojto | 90:cb3d968589d8 | 382 | */ |
| Kojto | 90:cb3d968589d8 | 383 | #define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| emilmont | 77:869cf507173a | 384 | |
| Kojto | 90:cb3d968589d8 | 385 | /** @brief Clear the UART NE pending flag. |
| Kojto | 90:cb3d968589d8 | 386 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 387 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 388 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 389 | * @retval None |
| Kojto | 90:cb3d968589d8 | 390 | */ |
| Kojto | 90:cb3d968589d8 | 391 | #define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 392 | |
| Kojto | 90:cb3d968589d8 | 393 | /** @brief Clear the UART ORE pending flag. |
| Kojto | 90:cb3d968589d8 | 394 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 395 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 396 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 397 | * @retval None |
| Kojto | 90:cb3d968589d8 | 398 | */ |
| Kojto | 90:cb3d968589d8 | 399 | #define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 400 | |
| Kojto | 90:cb3d968589d8 | 401 | /** @brief Clear the UART IDLE pending flag. |
| Kojto | 90:cb3d968589d8 | 402 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 403 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 90:cb3d968589d8 | 404 | * UART peripheral. |
| Kojto | 90:cb3d968589d8 | 405 | * @retval None |
| Kojto | 90:cb3d968589d8 | 406 | */ |
| Kojto | 90:cb3d968589d8 | 407 | #define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) |
| Kojto | 90:cb3d968589d8 | 408 | |
| Kojto | 99:dbbf35b96557 | 409 | /** @brief Enable the specified UART interrupt. |
| emilmont | 77:869cf507173a | 410 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 411 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 412 | * UART peripheral. |
| Kojto | 99:dbbf35b96557 | 413 | * @param __INTERRUPT__: specifies the UART interrupt source to enable. |
| emilmont | 77:869cf507173a | 414 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 415 | * @arg UART_IT_CTS: CTS change interrupt |
| emilmont | 77:869cf507173a | 416 | * @arg UART_IT_LBD: LIN Break detection interrupt |
| emilmont | 77:869cf507173a | 417 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 418 | * @arg UART_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 419 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 420 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 421 | * @arg UART_IT_PE: Parity Error interrupt |
| emilmont | 77:869cf507173a | 422 | * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| emilmont | 77:869cf507173a | 423 | * @retval None |
| emilmont | 77:869cf507173a | 424 | */ |
| emilmont | 77:869cf507173a | 425 | #define UART_IT_MASK ((uint32_t)0x0000FFFF) |
| emilmont | 77:869cf507173a | 426 | #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 427 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 428 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) |
| Kojto | 99:dbbf35b96557 | 429 | /** @brief Disable the specified UART interrupt. |
| Kojto | 99:dbbf35b96557 | 430 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 99:dbbf35b96557 | 431 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| Kojto | 99:dbbf35b96557 | 432 | * UART peripheral. |
| Kojto | 99:dbbf35b96557 | 433 | * @param __INTERRUPT__: specifies the UART interrupt source to disable. |
| Kojto | 99:dbbf35b96557 | 434 | * This parameter can be one of the following values: |
| Kojto | 99:dbbf35b96557 | 435 | * @arg UART_IT_CTS: CTS change interrupt |
| Kojto | 99:dbbf35b96557 | 436 | * @arg UART_IT_LBD: LIN Break detection interrupt |
| Kojto | 99:dbbf35b96557 | 437 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| Kojto | 99:dbbf35b96557 | 438 | * @arg UART_IT_TC: Transmission complete interrupt |
| Kojto | 99:dbbf35b96557 | 439 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| Kojto | 99:dbbf35b96557 | 440 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| Kojto | 99:dbbf35b96557 | 441 | * @arg UART_IT_PE: Parity Error interrupt |
| Kojto | 99:dbbf35b96557 | 442 | * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| Kojto | 99:dbbf35b96557 | 443 | * @retval None |
| Kojto | 99:dbbf35b96557 | 444 | */ |
| emilmont | 77:869cf507173a | 445 | #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 446 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ |
| emilmont | 77:869cf507173a | 447 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) |
| emilmont | 77:869cf507173a | 448 | |
| emilmont | 77:869cf507173a | 449 | /** @brief Checks whether the specified UART interrupt has occurred or not. |
| emilmont | 77:869cf507173a | 450 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 451 | * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or |
| emilmont | 77:869cf507173a | 452 | * UART peripheral. |
| emilmont | 77:869cf507173a | 453 | * @param __IT__: specifies the UART interrupt source to check. |
| emilmont | 77:869cf507173a | 454 | * This parameter can be one of the following values: |
| emilmont | 77:869cf507173a | 455 | * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) |
| emilmont | 77:869cf507173a | 456 | * @arg UART_IT_LBD: LIN Break detection interrupt |
| emilmont | 77:869cf507173a | 457 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| emilmont | 77:869cf507173a | 458 | * @arg UART_IT_TC: Transmission complete interrupt |
| emilmont | 77:869cf507173a | 459 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| emilmont | 77:869cf507173a | 460 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| emilmont | 77:869cf507173a | 461 | * @arg USART_IT_ERR: Error interrupt |
| emilmont | 77:869cf507173a | 462 | * @retval The new state of __IT__ (TRUE or FALSE). |
| emilmont | 77:869cf507173a | 463 | */ |
| emilmont | 77:869cf507173a | 464 | #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ |
| emilmont | 77:869cf507173a | 465 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) |
| emilmont | 77:869cf507173a | 466 | |
| Kojto | 90:cb3d968589d8 | 467 | /** @brief Enable CTS flow control |
| Kojto | 90:cb3d968589d8 | 468 | * This macro allows to enable CTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 469 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 470 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 471 | * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 472 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 473 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 474 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 475 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 476 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 477 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 478 | * @retval None |
| Kojto | 90:cb3d968589d8 | 479 | */ |
| Kojto | 90:cb3d968589d8 | 480 | #define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 481 | do{ \ |
| Kojto | 90:cb3d968589d8 | 482 | SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 483 | (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ |
| Kojto | 90:cb3d968589d8 | 484 | } while(0) |
| Kojto | 90:cb3d968589d8 | 485 | |
| Kojto | 90:cb3d968589d8 | 486 | /** @brief Disable CTS flow control |
| Kojto | 90:cb3d968589d8 | 487 | * This macro allows to disable CTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 488 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 489 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 490 | * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 491 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 492 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 493 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 494 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 495 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 496 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 497 | * @retval None |
| Kojto | 90:cb3d968589d8 | 498 | */ |
| Kojto | 90:cb3d968589d8 | 499 | #define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 500 | do{ \ |
| Kojto | 90:cb3d968589d8 | 501 | CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 502 | (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ |
| Kojto | 90:cb3d968589d8 | 503 | } while(0) |
| Kojto | 90:cb3d968589d8 | 504 | |
| Kojto | 90:cb3d968589d8 | 505 | /** @brief Enable RTS flow control |
| Kojto | 90:cb3d968589d8 | 506 | * This macro allows to enable RTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 507 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 508 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 509 | * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 510 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 511 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 512 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 513 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 514 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 515 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 516 | * @retval None |
| Kojto | 90:cb3d968589d8 | 517 | */ |
| Kojto | 90:cb3d968589d8 | 518 | #define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 519 | do{ \ |
| Kojto | 90:cb3d968589d8 | 520 | SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ |
| Kojto | 90:cb3d968589d8 | 521 | (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ |
| Kojto | 90:cb3d968589d8 | 522 | } while(0) |
| Kojto | 90:cb3d968589d8 | 523 | |
| Kojto | 90:cb3d968589d8 | 524 | /** @brief Disable RTS flow control |
| Kojto | 90:cb3d968589d8 | 525 | * This macro allows to disable RTS hardware flow control for a given UART instance, |
| Kojto | 90:cb3d968589d8 | 526 | * without need to call HAL_UART_Init() function. |
| Kojto | 90:cb3d968589d8 | 527 | * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. |
| Kojto | 90:cb3d968589d8 | 528 | * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need |
| Kojto | 90:cb3d968589d8 | 529 | * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : |
| Kojto | 90:cb3d968589d8 | 530 | * - UART instance should have already been initialised (through call of HAL_UART_Init() ) |
| Kojto | 90:cb3d968589d8 | 531 | * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) |
| Kojto | 90:cb3d968589d8 | 532 | * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). |
| Kojto | 90:cb3d968589d8 | 533 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 90:cb3d968589d8 | 534 | * The Handle Instance can be USART1, USART2 or LPUART. |
| Kojto | 90:cb3d968589d8 | 535 | * @retval None |
| Kojto | 90:cb3d968589d8 | 536 | */ |
| Kojto | 90:cb3d968589d8 | 537 | #define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ |
| Kojto | 90:cb3d968589d8 | 538 | do{ \ |
| Kojto | 90:cb3d968589d8 | 539 | CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ |
| Kojto | 90:cb3d968589d8 | 540 | (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ |
| Kojto | 90:cb3d968589d8 | 541 | } while(0) |
| Kojto | 90:cb3d968589d8 | 542 | |
| Kojto | 99:dbbf35b96557 | 543 | /** @brief macros to enables the UART's one bit sample method |
| emilmont | 77:869cf507173a | 544 | * @param __HANDLE__: specifies the UART Handle. |
| emilmont | 77:869cf507173a | 545 | * @retval None |
| emilmont | 77:869cf507173a | 546 | */ |
| Kojto | 99:dbbf35b96557 | 547 | #define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
| Kojto | 99:dbbf35b96557 | 548 | |
| Kojto | 99:dbbf35b96557 | 549 | /** @brief macros to disables the UART's one bit sample method |
| Kojto | 99:dbbf35b96557 | 550 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 99:dbbf35b96557 | 551 | * @retval None |
| Kojto | 99:dbbf35b96557 | 552 | */ |
| Kojto | 99:dbbf35b96557 | 553 | #define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) |
| emilmont | 77:869cf507173a | 554 | |
| Kojto | 99:dbbf35b96557 | 555 | /** @brief Enable UART |
| Kojto | 99:dbbf35b96557 | 556 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 99:dbbf35b96557 | 557 | * @retval None |
| Kojto | 99:dbbf35b96557 | 558 | */ |
| emilmont | 77:869cf507173a | 559 | #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| Kojto | 99:dbbf35b96557 | 560 | |
| Kojto | 99:dbbf35b96557 | 561 | /** @brief Disable UART |
| Kojto | 99:dbbf35b96557 | 562 | * @param __HANDLE__: specifies the UART Handle. |
| Kojto | 99:dbbf35b96557 | 563 | * @retval None |
| Kojto | 99:dbbf35b96557 | 564 | */ |
| emilmont | 77:869cf507173a | 565 | #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| Kojto | 99:dbbf35b96557 | 566 | /** |
| Kojto | 99:dbbf35b96557 | 567 | * @} |
| Kojto | 99:dbbf35b96557 | 568 | */ |
| emilmont | 77:869cf507173a | 569 | |
| emilmont | 77:869cf507173a | 570 | /* Exported functions --------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 571 | /** @addtogroup UART_Exported_Functions |
| Kojto | 99:dbbf35b96557 | 572 | * @{ |
| Kojto | 99:dbbf35b96557 | 573 | */ |
| Kojto | 99:dbbf35b96557 | 574 | |
| Kojto | 99:dbbf35b96557 | 575 | /** @addtogroup UART_Exported_Functions_Group1 |
| Kojto | 99:dbbf35b96557 | 576 | * @{ |
| Kojto | 99:dbbf35b96557 | 577 | */ |
| emilmont | 77:869cf507173a | 578 | /* Initialization/de-initialization functions **********************************/ |
| emilmont | 77:869cf507173a | 579 | HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 580 | HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 581 | HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); |
| Kojto | 99:dbbf35b96557 | 582 | HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); |
| emilmont | 77:869cf507173a | 583 | HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 584 | void HAL_UART_MspInit(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 585 | void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); |
| Kojto | 99:dbbf35b96557 | 586 | /** |
| Kojto | 99:dbbf35b96557 | 587 | * @} |
| Kojto | 99:dbbf35b96557 | 588 | */ |
| emilmont | 77:869cf507173a | 589 | |
| Kojto | 99:dbbf35b96557 | 590 | /** @addtogroup UART_Exported_Functions_Group2 |
| Kojto | 99:dbbf35b96557 | 591 | * @{ |
| Kojto | 99:dbbf35b96557 | 592 | */ |
| emilmont | 77:869cf507173a | 593 | /* IO operation functions *******************************************************/ |
| emilmont | 77:869cf507173a | 594 | HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 595 | HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| emilmont | 77:869cf507173a | 596 | HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 597 | HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 598 | HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 599 | HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| emilmont | 77:869cf507173a | 600 | HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 601 | HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 602 | HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 603 | void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 604 | void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 605 | void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 606 | void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 607 | void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 81:7d30d6019079 | 608 | void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); |
| Kojto | 99:dbbf35b96557 | 609 | /** |
| Kojto | 99:dbbf35b96557 | 610 | * @} |
| Kojto | 99:dbbf35b96557 | 611 | */ |
| emilmont | 77:869cf507173a | 612 | |
| Kojto | 99:dbbf35b96557 | 613 | /** @addtogroup UART_Exported_Functions_Group3 |
| Kojto | 99:dbbf35b96557 | 614 | * @{ |
| Kojto | 99:dbbf35b96557 | 615 | */ |
| emilmont | 77:869cf507173a | 616 | /* Peripheral Control functions ************************************************/ |
| emilmont | 77:869cf507173a | 617 | HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 618 | HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 619 | HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 620 | HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 621 | HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); |
| Kojto | 99:dbbf35b96557 | 622 | /** |
| Kojto | 99:dbbf35b96557 | 623 | * @} |
| Kojto | 99:dbbf35b96557 | 624 | */ |
| emilmont | 77:869cf507173a | 625 | |
| Kojto | 99:dbbf35b96557 | 626 | /** @addtogroup UART_Exported_Functions_Group4 |
| Kojto | 99:dbbf35b96557 | 627 | * @{ |
| Kojto | 99:dbbf35b96557 | 628 | */ |
| emilmont | 77:869cf507173a | 629 | /* Peripheral State functions **************************************************/ |
| emilmont | 77:869cf507173a | 630 | HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); |
| emilmont | 77:869cf507173a | 631 | uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); |
| Kojto | 99:dbbf35b96557 | 632 | /** |
| Kojto | 99:dbbf35b96557 | 633 | * @} |
| Kojto | 99:dbbf35b96557 | 634 | */ |
| Kojto | 99:dbbf35b96557 | 635 | |
| Kojto | 99:dbbf35b96557 | 636 | /** |
| Kojto | 99:dbbf35b96557 | 637 | * @} |
| Kojto | 99:dbbf35b96557 | 638 | */ |
| Kojto | 99:dbbf35b96557 | 639 | /* Private types -------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 640 | /* Private variables ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 641 | /* Private constants ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 642 | /** @defgroup UART_Private_Constants UART Private Constants |
| Kojto | 99:dbbf35b96557 | 643 | * @{ |
| Kojto | 99:dbbf35b96557 | 644 | */ |
| Kojto | 99:dbbf35b96557 | 645 | /** @brief UART interruptions flag mask |
| Kojto | 99:dbbf35b96557 | 646 | * |
| Kojto | 99:dbbf35b96557 | 647 | */ |
| Kojto | 99:dbbf35b96557 | 648 | #define UART_CR1_REG_INDEX 1 |
| Kojto | 99:dbbf35b96557 | 649 | #define UART_CR2_REG_INDEX 2 |
| Kojto | 99:dbbf35b96557 | 650 | #define UART_CR3_REG_INDEX 3 |
| Kojto | 99:dbbf35b96557 | 651 | /** |
| Kojto | 99:dbbf35b96557 | 652 | * @} |
| Kojto | 99:dbbf35b96557 | 653 | */ |
| Kojto | 99:dbbf35b96557 | 654 | |
| Kojto | 99:dbbf35b96557 | 655 | /* Private macros ------------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 656 | /** @defgroup UART_Private_Macros UART Private Macros |
| Kojto | 99:dbbf35b96557 | 657 | * @{ |
| Kojto | 99:dbbf35b96557 | 658 | */ |
| Kojto | 99:dbbf35b96557 | 659 | #define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ |
| Kojto | 99:dbbf35b96557 | 660 | ((LENGTH) == UART_WORDLENGTH_9B)) |
| Kojto | 99:dbbf35b96557 | 661 | #define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) |
| Kojto | 99:dbbf35b96557 | 662 | #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ |
| Kojto | 99:dbbf35b96557 | 663 | ((STOPBITS) == UART_STOPBITS_2)) |
| Kojto | 99:dbbf35b96557 | 664 | #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ |
| Kojto | 99:dbbf35b96557 | 665 | ((PARITY) == UART_PARITY_EVEN) || \ |
| Kojto | 99:dbbf35b96557 | 666 | ((PARITY) == UART_PARITY_ODD)) |
| Kojto | 99:dbbf35b96557 | 667 | #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ |
| Kojto | 99:dbbf35b96557 | 668 | (((CONTROL) == UART_HWCONTROL_NONE) || \ |
| Kojto | 99:dbbf35b96557 | 669 | ((CONTROL) == UART_HWCONTROL_RTS) || \ |
| Kojto | 99:dbbf35b96557 | 670 | ((CONTROL) == UART_HWCONTROL_CTS) || \ |
| Kojto | 99:dbbf35b96557 | 671 | ((CONTROL) == UART_HWCONTROL_RTS_CTS)) |
| Kojto | 99:dbbf35b96557 | 672 | #define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) |
| Kojto | 99:dbbf35b96557 | 673 | #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ |
| Kojto | 99:dbbf35b96557 | 674 | ((STATE) == UART_STATE_ENABLE)) |
| Kojto | 99:dbbf35b96557 | 675 | #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ |
| Kojto | 99:dbbf35b96557 | 676 | ((SAMPLING) == UART_OVERSAMPLING_8)) |
| Kojto | 99:dbbf35b96557 | 677 | #define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) |
| Kojto | 99:dbbf35b96557 | 678 | #define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ |
| Kojto | 99:dbbf35b96557 | 679 | ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) |
| Kojto | 99:dbbf35b96557 | 680 | #define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ |
| Kojto | 99:dbbf35b96557 | 681 | ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) |
| Kojto | 99:dbbf35b96557 | 682 | #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001) |
| Kojto | 99:dbbf35b96557 | 683 | #define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) |
| Kojto | 99:dbbf35b96557 | 684 | |
| Kojto | 99:dbbf35b96557 | 685 | #define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) |
| Kojto | 99:dbbf35b96557 | 686 | #define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100) |
| Kojto | 99:dbbf35b96557 | 687 | #define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) |
| Kojto | 99:dbbf35b96557 | 688 | #define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F)) |
| Kojto | 99:dbbf35b96557 | 689 | |
| Kojto | 99:dbbf35b96557 | 690 | #define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_))) |
| Kojto | 99:dbbf35b96557 | 691 | #define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100) |
| Kojto | 99:dbbf35b96557 | 692 | #define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) |
| Kojto | 99:dbbf35b96557 | 693 | #define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F)) |
| Kojto | 99:dbbf35b96557 | 694 | |
| Kojto | 99:dbbf35b96557 | 695 | /** |
| Kojto | 99:dbbf35b96557 | 696 | * @} |
| Kojto | 99:dbbf35b96557 | 697 | */ |
| Kojto | 99:dbbf35b96557 | 698 | |
| Kojto | 99:dbbf35b96557 | 699 | /* Private functions ---------------------------------------------------------*/ |
| Kojto | 99:dbbf35b96557 | 700 | /** @defgroup UART_Private_Functions UART Private Functions |
| Kojto | 99:dbbf35b96557 | 701 | * @{ |
| Kojto | 99:dbbf35b96557 | 702 | */ |
| Kojto | 99:dbbf35b96557 | 703 | |
| Kojto | 99:dbbf35b96557 | 704 | /** |
| Kojto | 99:dbbf35b96557 | 705 | * @} |
| Kojto | 99:dbbf35b96557 | 706 | */ |
| emilmont | 77:869cf507173a | 707 | |
| emilmont | 77:869cf507173a | 708 | /** |
| emilmont | 77:869cf507173a | 709 | * @} |
| emilmont | 77:869cf507173a | 710 | */ |
| emilmont | 77:869cf507173a | 711 | |
| emilmont | 77:869cf507173a | 712 | /** |
| emilmont | 77:869cf507173a | 713 | * @} |
| Kojto | 99:dbbf35b96557 | 714 | */ |
| Kojto | 99:dbbf35b96557 | 715 | |
| emilmont | 77:869cf507173a | 716 | #ifdef __cplusplus |
| emilmont | 77:869cf507173a | 717 | } |
| emilmont | 77:869cf507173a | 718 | #endif |
| emilmont | 77:869cf507173a | 719 | |
| emilmont | 77:869cf507173a | 720 | #endif /* __STM32F4xx_HAL_UART_H */ |
| emilmont | 77:869cf507173a | 721 | |
| emilmont | 77:869cf507173a | 722 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |