Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
TARGET_ARM_MPS2_M0P/SMM_MPS2.h
- Committer:
- elijahorr
- Date:
- 2016-04-13
- Revision:
- 120:2eb10e18b8d7
- Parent:
- 116:c0f6e94411f5
File content as of revision 120:2eb10e18b8d7:
/* MPS2 CMSIS Library
*
* Copyright (c) 2006-2016 ARM Limited
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
* File: smm_mps2.h
* Release: Version 1.1
*******************************************************************************/
#ifndef __SMM_MPS2_H
#define __SMM_MPS2_H
#include "peripherallink.h" /* device specific header file */
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/******************************************************************************/
/* FPGA System Register declaration */
/******************************************************************************/
typedef struct
{
__IO uint32_t LED; // Offset: 0x000 (R/W) LED connections
// [31:2] : Reserved
// [1:0] : LEDs
uint32_t RESERVED1[1];
__IO uint32_t BUTTON; // Offset: 0x008 (R/W) Buttons
// [31:2] : Reserved
// [1:0] : Buttons
uint32_t RESERVED2[1];
__IO uint32_t CLK1HZ; // Offset: 0x010 (R/W) 1Hz up counter
__IO uint32_t CLK100HZ; // Offset: 0x014 (R/W) 100Hz up counter
__IO uint32_t COUNTER; // Offset: 0x018 (R/W) Cycle Up Counter
// Increments when 32-bit prescale counter reach zero
uint32_t RESERVED3[1];
__IO uint32_t PRESCALE; // Offset: 0x020 (R/W) Prescaler
// Bit[31:0] : reload value for prescale counter
__IO uint32_t PSCNTR; // Offset: 0x024 (R/W) 32-bit Prescale counter
// current value of the pre-scaler counter
// The Cycle Up Counter increment when the prescale down counter reach 0
// The pre-scaler counter is reloaded with PRESCALE after reaching 0.
uint32_t RESERVED4[9];
__IO uint32_t MISC; // Offset: 0x04C (R/W) Misc control */
// [31:10] : Reserved
// [9] : SHIELD_1_SPI_nCS
// [8] : SHIELD_0_SPI_nCS
// [7] : ADC_SPI_nCS
// [6] : CLCD_BL_CTRL
// [5] : CLCD_RD
// [4] : CLCD_RS
// [3] : CLCD_RESET
// [2] : RESERVED
// [1] : SPI_nSS
// [0] : CLCD_CS
} MPS2_FPGAIO_TypeDef;
// MISC register bit definitions
#define CLCD_CS_Pos 0
#define CLCD_CS_Msk (1UL<<CLCD_CS_Pos)
#define SPI_nSS_Pos 1
#define SPI_nSS_Msk (1UL<<SPI_nSS_Pos)
#define CLCD_RESET_Pos 3
#define CLCD_RESET_Msk (1UL<<CLCD_RESET_Pos)
#define CLCD_RS_Pos 4
#define CLCD_RS_Msk (1UL<<CLCD_RS_Pos)
#define CLCD_RD_Pos 5
#define CLCD_RD_Msk (1UL<<CLCD_RD_Pos)
#define CLCD_BL_Pos 6
#define CLCD_BL_Msk (1UL<<CLCD_BL_Pos)
#define ADC_nCS_Pos 7
#define ADC_nCS_Msk (1UL<<ADC_nCS_Pos)
#define SHIELD_0_nCS_Pos 8
#define SHIELD_0_nCS_Msk (1UL<<SHIELD_0_nCS_Pos)
#define SHIELD_1_nCS_Pos 9
#define SHIELD_1_nCS_Msk (1UL<<SHIELD_1_nCS_Pos)
/******************************************************************************/
/* SCC Register declaration */
/******************************************************************************/
typedef struct //
{
__IO uint32_t CFG_REG0; // Offset: 0x000 (R/W) Remaps block RAM to ZBT
// [31:1] : Reserved
// [0] 1 : REMAP BlockRam to ZBT
__IO uint32_t LEDS; // Offset: 0x004 (R/W) Controls the MCC user LEDs
// [31:8] : Reserved
// [7:0] : MCC LEDs
uint32_t RESERVED0[1];
__I uint32_t SWITCHES; // Offset: 0x00C (R/ ) Denotes the state of the MCC user switches
// [31:8] : Reserved
// [7:0] : These bits indicate state of the MCC switches
__I uint32_t CFG_REG4; // Offset: 0x010 (R/ ) Denotes the board revision
// [31:4] : Reserved
// [3:0] : Used by the MCC to pass PCB revision. 0 = A 1 = B
uint32_t RESERVED1[35];
__IO uint32_t SYS_CFGDATA_RTN; // Offset: 0x0A0 (R/W) User data register
// [31:0] : Data
__IO uint32_t SYS_CFGDATA_OUT; // Offset: 0x0A4 (R/W) User data register
// [31:0] : Data
__IO uint32_t SYS_CFGCTRL; // Offset: 0x0A8 (R/W) Control register
// [31] : Start (generates interrupt on write to this bit)
// [30] : R/W access
// [29:26] : Reserved
// [25:20] : Function value
// [19:12] : Reserved
// [11:0] : Device (value of 0/1/2 for supported clocks)
__IO uint32_t SYS_CFGSTAT; // Offset: 0x0AC (R/W) Contains status information
// [31:2] : Reserved
// [1] : Error
// [0] : Complete
__IO uint32_t RESERVED2[20];
__IO uint32_t SCC_DLL; // Offset: 0x100 (R/W) DLL Lock Register
// [31:24] : DLL LOCK MASK[7:0] - Indicate if the DLL locked is masked
// [23:16] : DLL LOCK MASK[7:0] - Indicate if the DLLs are locked or unlocked
// [15:1] : Reserved
// [0] : This bit indicates if all enabled DLLs are locked
uint32_t RESERVED3[957];
__I uint32_t SCC_AID; // Offset: 0xFF8 (R/ ) SCC AID Register
// [31:24] : FPGA build number
// [23:20] : V2M-MPS2 target board revision (A = 0, B = 1)
// [19:11] : Reserved
// [10] : if “1” SCC_SW register has been implemented
// [9] : if “1” SCC_LED register has been implemented
// [8] : if “1” DLL lock register has been implemented
// [7:0] : number of SCC configuration register
__I uint32_t SCC_ID; // Offset: 0xFFC (R/ ) Contains information about the FPGA image
// [31:24] : Implementer ID: 0x41 = ARM
// [23:20] : Application note IP variant number
// [19:16] : IP Architecture: 0x4 =AHB
// [15:4] : Primary part number: 386 = AN386
// [3:0] : Application note IP revision number
} MPS2_SCC_TypeDef;
/******************************************************************************/
/* SSP Peripheral declaration */
/******************************************************************************/
typedef struct // Document DDI0194G_ssp_pl022_r1p3_trm.pdf
{
__IO uint32_t CR0; // Offset: 0x000 (R/W) Control register 0
// [31:16] : Reserved
// [15:8] : Serial clock rate
// [7] : SSPCLKOUT phase, applicable to Motorola SPI frame format only
// [6] : SSPCLKOUT polarity, applicable to Motorola SPI frame format only
// [5:4] : Frame format
// [3:0] : Data Size Select
__IO uint32_t CR1; // Offset: 0x004 (R/W) Control register 1
// [31:4] : Reserved
// [3] : Slave-mode output disable
// [2] : Master or slave mode select
// [1] : Synchronous serial port enable
// [0] : Loop back mode
__IO uint32_t DR; // Offset: 0x008 (R/W) Data register
// [31:16] : Reserved
// [15:0] : Transmit/Receive FIFO
__I uint32_t SR; // Offset: 0x00C (R/ ) Status register
// [31:5] : Reserved
// [4] : PrimeCell SSP busy flag
// [3] : Receive FIFO full
// [2] : Receive FIFO not empty
// [1] : Transmit FIFO not full
// [0] : Transmit FIFO empty
__IO uint32_t CPSR; // Offset: 0x010 (R/W) Clock prescale register
// [31:8] : Reserved
// [8:0] : Clock prescale divisor
__IO uint32_t IMSC; // Offset: 0x014 (R/W) Interrupt mask set or clear register
// [31:4] : Reserved
// [3] : Transmit FIFO interrupt mask
// [2] : Receive FIFO interrupt mask
// [1] : Receive timeout interrupt mask
// [0] : Receive overrun interrupt mask
__I uint32_t RIS; // Offset: 0x018 (R/ ) Raw interrupt status register
// [31:4] : Reserved
// [3] : raw interrupt state, prior to masking, of the SSPTXINTR interrupt
// [2] : raw interrupt state, prior to masking, of the SSPRXINTR interrupt
// [1] : raw interrupt state, prior to masking, of the SSPRTINTR interrupt
// [0] : raw interrupt state, prior to masking, of the SSPRORINTR interrupt
__I uint32_t MIS; // Offset: 0x01C (R/ ) Masked interrupt status register
// [31:4] : Reserved
// [3] : transmit FIFO masked interrupt state, after masking, of the SSPTXINTR interrupt
// [2] : receive FIFO masked interrupt state, after masking, of the SSPRXINTR interrupt
// [1] : receive timeout masked interrupt state, after masking, of the SSPRTINTR interrupt
// [0] : receive over run masked interrupt status, after masking, of the SSPRORINTR interrupt
__O uint32_t ICR; // Offset: 0x020 ( /W) Interrupt clear register
// [31:2] : Reserved
// [1] : Clears the SSPRTINTR interrupt
// [0] : Clears the SSPRORINTR interrupt
__IO uint32_t DMACR; // Offset: 0x024 (R/W) DMA control register
// [31:2] : Reserved
// [1] : Transmit DMA Enable
// [0] : Receive DMA Enable
} MPS2_SSP_TypeDef;
// SSP_CR0 Control register 0
#define SSP_CR0_DSS_Pos 0 // Data Size Select
#define SSP_CR0_DSS_Msk (0xF<<SSP_CR0_DSS_Pos)
#define SSP_CR0_FRF_Pos 4 // Frame Format Select
#define SSP_CR0_FRF_Msk (3UL<<SSP_CR0_FRM_Pos)
#define SSP_CR0_SPO_Pos 6 // SSPCLKOUT polarity
#define SSP_CR0_SPO_Msk (1UL<<SSP_CR0_SPO_Pos)
#define SSP_CR0_SPH_Pos 7 // SSPCLKOUT phase
#define SSP_CR0_SPH_Msk (1UL<<SSP_CR0_SPH_Pos)
#define SSP_CR0_SCR_Pos 8 // Serial Clock Rate (divide)
#define SSP_CR0_SCR_Msk (0xFF<<SSP_CR0_SCR_Pos)
#define SSP_CR0_SCR_DFLT 0x0300 // Serial Clock Rate (divide), default set at 3
#define SSP_CR0_FRF_MOT 0x0000 // Frame format, Motorola
#define SSP_CR0_DSS_8 0x0007 // Data packet size, 8bits
#define SSP_CR0_DSS_16 0x000F // Data packet size, 16bits
// SSP_CR1 Control register 1
#define SSP_CR1_LBM_Pos 0 // Loop Back Mode
#define SSP_CR1_LBM_Msk (1UL<<SSP_CR1_LBM_Pos)
#define SSP_CR1_SSE_Pos 1 // Serial port enable
#define SSP_CR1_SSE_Msk (1UL<<SSP_CR1_SSE_Pos)
#define SSP_CR1_MS_Pos 2 // Master or Slave mode
#define SSP_CR1_MS_Msk (1UL<<SSP_CR1_MS_Pos)
#define SSP_CR1_SOD_Pos 3 // Slave Output mode Disable
#define SSP_CR1_SOD_Msk (1UL<<SSP_CR1_SOD_Pos)
// SSP_SR Status register
#define SSP_SR_TFE_Pos 0 // Transmit FIFO empty
#define SSP_SR_TFE_Msk (1UL<<SSP_SR_TFE_Pos)
#define SSP_SR_TNF_Pos 1 // Transmit FIFO not full
#define SSP_SR_TNF_Msk (1UL<<SSP_SR_TNF_Pos)
#define SSP_SR_RNE_Pos 2 // Receive FIFO not empty
#define SSP_SR_RNE_Msk (1UL<<SSP_SR_RNE_Pos)
#define SSP_SR_RFF_Pos 3 // Receive FIFO full
#define SSP_SR_RFF_Msk (1UL<<SSP_SR_RFF_Pos)
#define SSP_SR_BSY_Pos 4 // Busy
#define SSP_SR_BSY_Msk (1UL<<SSP_SR_BSY_Pos)
// SSP_CPSR Clock prescale register
#define SSP_CPSR_CPD_Pos 0 // Clock prescale divisor
#define SSP_CPSR_CPD_Msk (0xFF<<SSP_CPSR_CDP_Pos)
#define SSP_CPSR_DFLT 0x0008 // Clock prescale (use with SCR), default set at 8
// SSPIMSC Interrupt mask set and clear register
#define SSP_IMSC_RORIM_Pos 0 // Receive overrun not Masked
#define SSP_IMSC_RORIM_Msk (1UL<<SSP_IMSC_RORIM_Pos)
#define SSP_IMSC_RTIM_Pos 1 // Receive timeout not Masked
#define SSP_IMSC_RTIM_Msk (1UL<<SSP_IMSC_RTIM_Pos)
#define SSP_IMSC_RXIM_Pos 2 // Receive FIFO not Masked
#define SSP_IMSC_RXIM_Msk (1UL<<SSP_IMSC_RXIM_Pos)
#define SSP_IMSC_TXIM_Pos 3 // Transmit FIFO not Masked
#define SSP_IMSC_TXIM_Msk (1UL<<SSP_IMSC_TXIM_Pos)
// SSPRIS Raw interrupt status register
#define SSP_RIS_RORRIS_Pos 0 // Raw Overrun interrupt flag
#define SSP_RIS_RORRIS_Msk (1UL<<SSP_RIS_RORRIS_Pos)
#define SSP_RIS_RTRIS_Pos 1 // Raw Timemout interrupt flag
#define SSP_RIS_RTRIS_Msk (1UL<<SSP_RIS_RTRIS_Pos)
#define SSP_RIS_RXRIS_Pos 2 // Raw Receive interrupt flag
#define SSP_RIS_RXRIS_Msk (1UL<<SSP_RIS_RXRIS_Pos)
#define SSP_RIS_TXRIS_Pos 3 // Raw Transmit interrupt flag
#define SSP_RIS_TXRIS_Msk (1UL<<SSP_RIS_TXRIS_Pos)
// SSPMIS Masked interrupt status register
#define SSP_MIS_RORMIS_Pos 0 // Masked Overrun interrupt flag
#define SSP_MIS_RORMIS_Msk (1UL<<SSP_MIS_RORMIS_Pos)
#define SSP_MIS_RTMIS_Pos 1 // Masked Timemout interrupt flag
#define SSP_MIS_RTMIS_Msk (1UL<<SSP_MIS_RTMIS_Pos)
#define SSP_MIS_RXMIS_Pos 2 // Masked Receive interrupt flag
#define SSP_MIS_RXMIS_Msk (1UL<<SSP_MIS_RXMIS_Pos)
#define SSP_MIS_TXMIS_Pos 3 // Masked Transmit interrupt flag
#define SSP_MIS_TXMIS_Msk (1UL<<SSP_MIS_TXMIS_Pos)
// SSPICR Interrupt clear register
#define SSP_ICR_RORIC_Pos 0 // Clears Overrun interrupt flag
#define SSP_ICR_RORIC_Msk (1UL<<SSP_ICR_RORIC_Pos)
#define SSP_ICR_RTIC_Pos 1 // Clears Timemout interrupt flag
#define SSP_ICR_RTIC_Msk (1UL<<SSP_ICR_RTIC_Pos)
// SSPDMACR DMA control register
#define SSP_DMACR_RXDMAE_Pos 0 // Enable Receive FIFO DMA
#define SSP_DMACR_RXDMAE_Msk (1UL<<SSP_DMACR_RXDMAE_Pos)
#define SSP_DMACR_TXDMAE_Pos 1 // Enable Transmit FIFO DMA
#define SSP_DMACR_TXDMAE_Msk (1UL<<SSP_DMACR_TXDMAE_Pos)
/******************************************************************************/
/* Audio and Touch Screen (I2C) Peripheral declaration */
/******************************************************************************/
typedef struct
{
union {
__O uint32_t CONTROLS; // Offset: 0x000 CONTROL Set Register ( /W)
__I uint32_t CONTROL; // Offset: 0x000 CONTROL Status Register (R/ )
};
__O uint32_t CONTROLC; // Offset: 0x004 CONTROL Clear Register ( /W)
} MPS2_I2C_TypeDef;
#define SDA 1 << 1
#define SCL 1 << 0
/******************************************************************************/
/* Audio I2S Peripheral declaration */
/******************************************************************************/
typedef struct
{
/*!< Offset: 0x000 CONTROL Register (R/W) */
__IO uint32_t CONTROL; // <h> CONTROL </h>
// <o.0> TX Enable
// <0=> TX disabled
// <1=> TX enabled
// <o.1> TX IRQ Enable
// <0=> TX IRQ disabled
// <1=> TX IRQ enabled
// <o.2> RX Enable
// <0=> RX disabled
// <1=> RX enabled
// <o.3> RX IRQ Enable
// <0=> RX IRQ disabled
// <1=> RX IRQ enabled
// <o.10..8> TX Buffer Water Level
// <0=> / IRQ triggers when any space available
// <1=> / IRQ triggers when more than 1 space available
// <2=> / IRQ triggers when more than 2 space available
// <3=> / IRQ triggers when more than 3 space available
// <4=> Undefined!
// <5=> Undefined!
// <6=> Undefined!
// <7=> Undefined!
// <o.14..12> RX Buffer Water Level
// <0=> Undefined!
// <1=> / IRQ triggers when less than 1 space available
// <2=> / IRQ triggers when less than 2 space available
// <3=> / IRQ triggers when less than 3 space available
// <4=> / IRQ triggers when less than 4 space available
// <5=> Undefined!
// <6=> Undefined!
// <7=> Undefined!
// <o.16> FIFO reset
// <0=> Normal operation
// <1=> FIFO reset
// <o.17> Audio Codec reset
// <0=> Normal operation
// <1=> Assert audio Codec reset
/*!< Offset: 0x004 STATUS Register (R/ ) */
__I uint32_t STATUS; // <h> STATUS </h>
// <o.0> TX Buffer alert
// <0=> TX buffer don't need service yet
// <1=> TX buffer need service
// <o.1> RX Buffer alert
// <0=> RX buffer don't need service yet
// <1=> RX buffer need service
// <o.2> TX Buffer Empty
// <0=> TX buffer have data
// <1=> TX buffer empty
// <o.3> TX Buffer Full
// <0=> TX buffer not full
// <1=> TX buffer full
// <o.4> RX Buffer Empty
// <0=> RX buffer have data
// <1=> RX buffer empty
// <o.5> RX Buffer Full
// <0=> RX buffer not full
// <1=> RX buffer full
union {
/*!< Offset: 0x008 Error Status Register (R/ ) */
__I uint32_t ERROR; // <h> ERROR </h>
// <o.0> TX error
// <0=> Okay
// <1=> TX overrun/underrun
// <o.1> RX error
// <0=> Okay
// <1=> RX overrun/underrun
/*!< Offset: 0x008 Error Clear Register ( /W) */
__O uint32_t ERRORCLR; // <h> ERRORCLR </h>
// <o.0> TX error
// <0=> Okay
// <1=> Clear TX error
// <o.1> RX error
// <0=> Okay
// <1=> Clear RX error
};
/*!< Offset: 0x00C Divide ratio Register (R/W) */
__IO uint32_t DIVIDE; // <h> Divide ratio for Left/Right clock </h>
// <o.9..0> TX error (default 0x80)
/*!< Offset: 0x010 Transmit Buffer ( /W) */
__O uint32_t TXBUF; // <h> Transmit buffer </h>
// <o.15..0> Right channel
// <o.31..16> Left channel
/*!< Offset: 0x014 Receive Buffer (R/ ) */
__I uint32_t RXBUF; // <h> Receive buffer </h>
// <o.15..0> Right channel
// <o.31..16> Left channel
uint32_t RESERVED1[186];
__IO uint32_t ITCR; // <h> Integration Test Control Register </h>
// <o.0> ITEN
// <0=> Normal operation
// <1=> Integration Test mode enable
__O uint32_t ITIP1; // <h> Integration Test Input Register 1</h>
// <o.0> SDIN
__O uint32_t ITOP1; // <h> Integration Test Output Register 1</h>
// <o.0> SDOUT
// <o.1> SCLK
// <o.2> LRCK
// <o.3> IRQOUT
} MPS2_I2S_TypeDef;
#define I2S_CONTROL_TXEN_Pos 0
#define I2S_CONTROL_TXEN_Msk (1UL<<I2S_CONTROL_TXEN_Pos)
#define I2S_CONTROL_TXIRQEN_Pos 1
#define I2S_CONTROL_TXIRQEN_Msk (1UL<<I2S_CONTROL_TXIRQEN_Pos)
#define I2S_CONTROL_RXEN_Pos 2
#define I2S_CONTROL_RXEN_Msk (1UL<<I2S_CONTROL_RXEN_Pos)
#define I2S_CONTROL_RXIRQEN_Pos 3
#define I2S_CONTROL_RXIRQEN_Msk (1UL<<I2S_CONTROL_RXIRQEN_Pos)
#define I2S_CONTROL_TXWLVL_Pos 8
#define I2S_CONTROL_TXWLVL_Msk (7UL<<I2S_CONTROL_TXWLVL_Pos)
#define I2S_CONTROL_RXWLVL_Pos 12
#define I2S_CONTROL_RXWLVL_Msk (7UL<<I2S_CONTROL_RXWLVL_Pos)
/* FIFO reset*/
#define I2S_CONTROL_FIFORST_Pos 16
#define I2S_CONTROL_FIFORST_Msk (1UL<<I2S_CONTROL_FIFORST_Pos)
/* Codec reset*/
#define I2S_CONTROL_CODECRST_Pos 17
#define I2S_CONTROL_CODECRST_Msk (1UL<<I2S_CONTROL_CODECRST_Pos)
#define I2S_STATUS_TXIRQ_Pos 0
#define I2S_STATUS_TXIRQ_Msk (1UL<<I2S_STATUS_TXIRQ_Pos)
#define I2S_STATUS_RXIRQ_Pos 1
#define I2S_STATUS_RXIRQ_Msk (1UL<<I2S_STATUS_RXIRQ_Pos)
#define I2S_STATUS_TXEmpty_Pos 2
#define I2S_STATUS_TXEmpty_Msk (1UL<<I2S_STATUS_TXEmpty_Pos)
#define I2S_STATUS_TXFull_Pos 3
#define I2S_STATUS_TXFull_Msk (1UL<<I2S_STATUS_TXFull_Pos)
#define I2S_STATUS_RXEmpty_Pos 4
#define I2S_STATUS_RXEmpty_Msk (1UL<<I2S_STATUS_RXEmpty_Pos)
#define I2S_STATUS_RXFull_Pos 5
#define I2S_STATUS_RXFull_Msk (1UL<<I2S_STATUS_RXFull_Pos)
#define I2S_ERROR_TXERR_Pos 0
#define I2S_ERROR_TXERR_Msk (1UL<<I2S_ERROR_TXERR_Pos)
#define I2S_ERROR_RXERR_Pos 1
#define I2S_ERROR_RXERR_Msk (1UL<<I2S_ERROR_RXERR_Pos)
/******************************************************************************/
/* SMSC9220 Register Definitions */
/******************************************************************************/
typedef struct // SMSC LAN9220
{
__I uint32_t RX_DATA_PORT; // Receive FIFO Ports (offset 0x0)
uint32_t RESERVED1[0x7];
__O uint32_t TX_DATA_PORT; // Transmit FIFO Ports (offset 0x20)
uint32_t RESERVED2[0x7];
__I uint32_t RX_STAT_PORT; // Receive FIFO status port (offset 0x40)
__I uint32_t RX_STAT_PEEK; // Receive FIFO status peek (offset 0x44)
__I uint32_t TX_STAT_PORT; // Transmit FIFO status port (offset 0x48)
__I uint32_t TX_STAT_PEEK; // Transmit FIFO status peek (offset 0x4C)
__I uint32_t ID_REV; // Chip ID and Revision (offset 0x50)
__IO uint32_t IRQ_CFG; // Main Interrupt Configuration (offset 0x54)
__IO uint32_t INT_STS; // Interrupt Status (offset 0x58)
__IO uint32_t INT_EN; // Interrupt Enable Register (offset 0x5C)
uint32_t RESERVED3; // Reserved for future use (offset 0x60)
__I uint32_t BYTE_TEST; // Read-only byte order testing register 87654321h (offset 0x64)
__IO uint32_t FIFO_INT; // FIFO Level Interrupts (offset 0x68)
__IO uint32_t RX_CFG; // Receive Configuration (offset 0x6C)
__IO uint32_t TX_CFG; // Transmit Configuration (offset 0x70)
__IO uint32_t HW_CFG; // Hardware Configuration (offset 0x74)
__IO uint32_t RX_DP_CTL; // RX Datapath Control (offset 0x78)
__I uint32_t RX_FIFO_INF; // Receive FIFO Information (offset 0x7C)
__I uint32_t TX_FIFO_INF; // Transmit FIFO Information (offset 0x80)
__IO uint32_t PMT_CTRL; // Power Management Control (offset 0x84)
__IO uint32_t GPIO_CFG; // General Purpose IO Configuration (offset 0x88)
__IO uint32_t GPT_CFG; // General Purpose Timer Configuration (offset 0x8C)
__I uint32_t GPT_CNT; // General Purpose Timer Count (offset 0x90)
uint32_t RESERVED4; // Reserved for future use (offset 0x94)
__IO uint32_t ENDIAN; // WORD SWAP Register (offset 0x98)
__I uint32_t FREE_RUN; // Free Run Counter (offset 0x9C)
__I uint32_t RX_DROP; // RX Dropped Frames Counter (offset 0xA0)
__IO uint32_t MAC_CSR_CMD; // MAC CSR Synchronizer Command (offset 0xA4)
__IO uint32_t MAC_CSR_DATA; // MAC CSR Synchronizer Data (offset 0xA8)
__IO uint32_t AFC_CFG; // Automatic Flow Control Configuration (offset 0xAC)
__IO uint32_t E2P_CMD; // EEPROM Command (offset 0xB0)
__IO uint32_t E2P_DATA; // EEPROM Data (offset 0xB4)
} SMSC9220_TypeDef;
// SMSC9220 MAC Registers Indices
#define SMSC9220_MAC_CR 0x1
#define SMSC9220_MAC_ADDRH 0x2
#define SMSC9220_MAC_ADDRL 0x3
#define SMSC9220_MAC_HASHH 0x4
#define SMSC9220_MAC_HASHL 0x5
#define SMSC9220_MAC_MII_ACC 0x6
#define SMSC9220_MAC_MII_DATA 0x7
#define SMSC9220_MAC_FLOW 0x8
#define SMSC9220_MAC_VLAN1 0x9
#define SMSC9220_MAC_VLAN2 0xA
#define SMSC9220_MAC_WUFF 0xB
#define SMSC9220_MAC_WUCSR 0xC
// SMSC9220 PHY Registers Indices
#define SMSC9220_PHY_BCONTROL 0x0
#define SMSC9220_PHY_BSTATUS 0x1
#define SMSC9220_PHY_ID1 0x2
#define SMSC9220_PHY_ID2 0x3
#define SMSC9220_PHY_ANEG_ADV 0x4
#define SMSC9220_PHY_ANEG_LPA 0x5
#define SMSC9220_PHY_ANEG_EXP 0x6
#define SMSC9220_PHY_MCONTROL 0x17
#define SMSC9220_PHY_MSTATUS 0x18
#define SMSC9220_PHY_CSINDICATE 0x27
#define SMSC9220_PHY_INTSRC 0x29
#define SMSC9220_PHY_INTMASK 0x30
#define SMSC9220_PHY_CS 0x31
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
#define MPS2_SSP1_BASE (0x40020000ul) /* User SSP Base Address */
#define MPS2_SSP0_BASE (0x40021000ul) /* CLCD SSP Base Address */
#define MPS2_TSC_I2C_BASE (0x40022000ul) /* Touch Screen I2C Base Address */
#define MPS2_AAIC_I2C_BASE (0x40023000ul) /* Audio Interface I2C Base Address */
#define MPS2_AAIC_I2S_BASE (0x40024000ul) /* Audio Interface I2S Base Address */
#define MPS2_SSP2_BASE (0x40025000ul) /* adc SSP Base Address */
#define MPS2_SSP3_BASE (0x40026000ul) /* Shield 0 SSP Base Address */
#define MPS2_SSP4_BASE (0x40027000ul) /* Shield 1 SSP Base Address */
#define MPS2_FPGAIO_BASE (0x40028000ul) /* FPGAIO Base Address */
#define MPS2_SHIELD0_I2C_BASE (0x40029000ul) /* Shield 0 I2C Base Address */
#define MPS2_SHIELD1_I2C_BASE (0x4002A000ul) /* Shield 1 I2C Base Address */
#define MPS2_SCC_BASE (0x4002F000ul) /* SCC Base Address */
#ifdef CORTEX_M7
#define SMSC9220_BASE (0xA0000000ul) /* Ethernet SMSC9220 Base Address */
#else
#define SMSC9220_BASE (0x40200000ul) /* Ethernet SMSC9220 Base Address */
#endif
#define MPS2_VGA_TEXT_BUFFER (0x41000000ul) /* VGA Text Buffer Address */
#define MPS2_VGA_BUFFER (0x41100000ul) /* VGA Buffer Base Address */
/******************************************************************************/
/* Peripheral declaration */
/******************************************************************************/
#define SMSC9220 ((SMSC9220_TypeDef *) SMSC9220_BASE )
#define MPS2_TS_I2C ((MPS2_I2C_TypeDef *) MPS2_TSC_I2C_BASE )
#define MPS2_AAIC_I2C ((MPS2_I2C_TypeDef *) MPS2_AAIC_I2C_BASE )
#define MPS2_SHIELD0_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD0_I2C_BASE )
#define MPS2_SHIELD1_I2C ((MPS2_I2C_TypeDef *) MPS2_SHIELD1_I2C_BASE )
#define MPS2_AAIC_I2S ((MPS2_I2S_TypeDef *) MPS2_AAIC_I2S_BASE )
#define MPS2_FPGAIO ((MPS2_FPGAIO_TypeDef *) MPS2_FPGAIO_BASE )
#define MPS2_SCC ((MPS2_SCC_TypeDef *) MPS2_SCC_BASE )
#define MPS2_SSP0 ((MPS2_SSP_TypeDef *) MPS2_SSP0_BASE )
#define MPS2_SSP1 ((MPS2_SSP_TypeDef *) MPS2_SSP1_BASE )
#define MPS2_SSP2 ((MPS2_SSP_TypeDef *) MPS2_SSP2_BASE )
#define MPS2_SSP3 ((MPS2_SSP_TypeDef *) MPS2_SSP3_BASE )
#define MPS2_SSP4 ((MPS2_SSP_TypeDef *) MPS2_SSP4_BASE )
/******************************************************************************/
/* General Function Definitions */
/******************************************************************************/
/******************************************************************************/
/* General MACRO Definitions */
/******************************************************************************/
#endif /* __SMM_MPS2_H */