Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
TARGET_NUCLEO_F334R8/stm32f3xx_hal_comp.h
- Committer:
- bogdanm
- Date:
- 2014-07-02
- Revision:
- 86:04dd9b1680ae
- Child:
- 92:4fc01daae5a5
File content as of revision 86:04dd9b1680ae:
/** ****************************************************************************** * @file stm32f3xx_hal_comp.h * @author MCD Application Team * @version V1.0.1 * @date 18-June-2014 * @brief Header file of COMP HAL module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_COMP_H #define __STM32F3xx_HAL_COMP_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup COMP * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief COMP Init structure definition */ typedef struct { uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. This parameter can be a value of @ref COMPEx_InvertingInput */ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. This parameter can be a value of @ref COMPEx_NonInvertingInput Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */ uint32_t Output; /*!< Selects the output redirection of the comparator. This parameter can be a value of @ref COMPEx_Output */ uint32_t OutputPol; /*!< Selects the output polarity of the comparator. This parameter can be a value of @ref COMP_OutputPolarity */ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. This parameter can be a value of @ref COMPEx_Hysteresis Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */ uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator. This parameter can be a value of @ref COMPEx_BlankingSrce Note: Not available on STM32F373xB/C and STM32F378xx devices */ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator to adjust the speed/consumption. This parameter can be a value of @ref COMPEx_Mode Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */ uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2, 4 or 6 if available). This parameter can be a value of @ref COMPEx_WindowMode */ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). This parameter can be a value of @ref COMP_TriggerMode */ }COMP_InitTypeDef; /** * @brief HAL State structures definition */ typedef enum { HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */ HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */ HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */ HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */ HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ }HAL_COMP_StateTypeDef; /** * @brief PPP Handle Structure definition */ typedef struct { COMP_TypeDef *Instance; /*!< Register base address */ COMP_InitTypeDef Init; /*!< COMP required parameters */ HAL_LockTypeDef Lock; /*!< Locking object */ __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ }COMP_HandleTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup COMP_Exported_Constants * @{ */ /** @defgroup COMP_OutputPolarity * @{ */ #define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ #define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */ #define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ ((POL) == COMP_OUTPUTPOL_INVERTED)) /** * @} */ /** @defgroup COMP_OutputLevel * @{ */ /* When output polarity is not inverted, comparator output is low when the non-inverting input is at a lower voltage than the inverting input*/ #define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000) /* When output polarity is not inverted, comparator output is high when the non-inverting input is at a higher voltage than the inverting input */ #define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT /** * @} */ /** @defgroup COMP_TriggerMode * @{ */ #define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */ #define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ #define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ #define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING)) /** * @} */ #define COMP_LOCK_DISABLE ((uint32_t)0x00000000) #define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK #define COMP_STATE_BIT_LOCK ((uint32_t)0x10) /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @brief Reset COMP handle state * @param __HANDLE__: COMP handle. * @retval None */ #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) /* Include COMP HAL Extension module */ #include "stm32f3xx_hal_comp_ex.h" /* Exported functions --------------------------------------------------------*/ /* Initialization and de-initialization functions ****************************/ HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); /* Callback in Interrupt mode */ void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); /* Peripheral State and Error functions ***************************************/ HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F3xx_HAL_COMP_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/