Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F411RE/stm32f4xx_hal_spdifrx.h
- Revision:
- 99:dbbf35b96557
- Child:
- 106:ba1f97679dad
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_spdifrx.h Wed May 13 08:08:21 2015 +0200
@@ -0,0 +1,559 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SPDIFRX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPDIFRX_H
+#define __STM32F4xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPDIFRX
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPDIFRX Init structure definition
+ */
+typedef struct
+{
+ uint32_t InputSelection; /*!< Specifies the SPDIF input selection.
+ This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+ This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input.
+ This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
+ This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_InitTypeDef;
+
+/**
+ * @brief SPDIFRX SetDataFormat structure definition
+ */
+typedef struct
+{
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_SetDataFormatTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPDIFRX_STATE_RESET = 0x00, /*!< SPDIFRX not yet initialized or disabled */
+ HAL_SPDIFRX_STATE_READY = 0x01, /*!< SPDIFRX initialized and ready for use */
+ HAL_SPDIFRX_STATE_BUSY = 0x02, /*!< SPDIFRX internal process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_RX = 0x03, /*!< SPDIFRX internal Data Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_CX = 0x04, /*!< SPDIFRX internal Control Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_ERROR = 0x07 /*!< SPDIFRX error state */
+}HAL_SPDIFRX_StateTypeDef;
+
+/**
+ * @brief SPDIFRX handle Structure definition
+ */
+typedef struct
+{
+ SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */
+
+ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */
+
+ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */
+
+ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */
+
+ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */
+
+ __IO uint32_t ErrorCode; /* SPDIFRX Error code */
+
+}SPDIFRX_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+ * @{
+ */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+ * @{
+ */
+#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004) /*!< Parity error */
+#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010) /*!< Unknown Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+ * @{
+ */
+#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000)
+#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000)
+#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000)
+#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+ * @{
+ */
+#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000)
+#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000)
+#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000)
+#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+ * @{
+ */
+#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000) /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection
+ * @{
+ */
+#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000)
+#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+ * @{
+ */
+#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000)
+#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010)
+#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+ * @{
+ */
+#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000)
+#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+ * @{
+ */
+
+#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFC)
+#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001)
+#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+ * @{
+ */
+#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+ * @{
+ */
+#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPDIFRX handle state
+ * @param __HANDLE__: SPDIFRX handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief Disable the specified SPDIFRX peripheral (IDLE State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief Enable the specified SPDIFRX peripheral (SYNC State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief Enable the specified SPDIFRX peripheral (RCV State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+
+/** @brief Enable or disable the specified SPDIFRX interrupts.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval None
+ */
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPDIFRX flag is set or not.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_RXNE
+ * @arg SPDIFRX_FLAG_CSRNE
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_FLAG_SBD
+ * @arg SPDIFRX_FLAG_SYNCD
+ * @arg SPDIFRX_FLAG_FERR
+ * @arg SPDIFRX_FLAG_SERR
+ * @arg SPDIFRX_FLAG_TERR
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_SR_SBD
+ * @arg SPDIFRX_SR_SYNCD
+ * @retval None
+ */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+ * @{
+ */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \
+ ((INPUT) == SPDIFRX_INPUT_IN2) || \
+ ((INPUT) == SPDIFRX_INPUT_IN3) || \
+ ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+ ((RET) == SPDIFRX_MAXRETRIES_3) || \
+ ((RET) == SPDIFRX_MAXRETRIES_15) || \
+ ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+ ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+ ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+ ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+ ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+
+#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/