Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
Diff: TARGET_ARCH_MAX/stm32f4xx_hal_fmpi2c.h
- Revision:
- 99:dbbf35b96557
- Child:
- 106:ba1f97679dad
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_ARCH_MAX/stm32f4xx_hal_fmpi2c.h Wed May 13 08:08:21 2015 +0200 @@ -0,0 +1,577 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_fmpi2c.h + * @author MCD Application Team + * @version V1.3.0 + * @date 09-March-2015 + * @brief Header file of FMPI2C HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_FMPI2C_H +#define __STM32F4xx_HAL_FMPI2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F446xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal_def.h" + +/** @addtogroup STM32F4xx_HAL_Driver + * @{ + */ + +/** @addtogroup FMPI2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types + * @{ + */ + +/** + * @brief FMPI2C Configuration Structure definition + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value. + This parameter calculated by referring to FMPI2C initialization + section in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref FMPI2C_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref FMPI2C_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected + This parameter can be a value of @ref FMPI2C_own_address2_masks */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref FMPI2C_general_call_addressing_mode */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref FMPI2C_nostretch_mode */ + +}FMPI2C_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_FMPI2C_STATE_RESET = 0x00, /*!< FMPI2C not yet initialized or disabled */ + HAL_FMPI2C_STATE_READY = 0x01, /*!< FMPI2C initialized and ready for use */ + HAL_FMPI2C_STATE_BUSY = 0x02, /*!< FMPI2C internal process is ongoing */ + HAL_FMPI2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */ + HAL_FMPI2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */ + HAL_FMPI2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */ + HAL_FMPI2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */ + HAL_FMPI2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */ + HAL_FMPI2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */ + HAL_FMPI2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_FMPI2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ +}HAL_FMPI2C_StateTypeDef; + +/** + * @brief HAL FMPI2C Error Code structure definition + */ +typedef enum +{ + HAL_FMPI2C_ERROR_NONE = 0x00, /*!< No error */ + HAL_FMPI2C_ERROR_BERR = 0x01, /*!< BERR error */ + HAL_FMPI2C_ERROR_ARLO = 0x02, /*!< ARLO error */ + HAL_FMPI2C_ERROR_AF = 0x04, /*!< ACKF error */ + HAL_FMPI2C_ERROR_OVR = 0x08, /*!< OVR error */ + HAL_FMPI2C_ERROR_DMA = 0x10, /*!< DMA transfer error */ + HAL_FMPI2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */ + HAL_FMPI2C_ERROR_SIZE = 0x40 /*!< Size Management error */ +}HAL_FMPI2C_ErrorTypeDef; + +/** + * @brief FMPI2C handle Structure definition + */ +typedef struct +{ + FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */ + + FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */ + + uint16_t XferSize; /*!< FMPI2C transfer size */ + + __IO uint16_t XferCount; /*!< FMPI2C transfer counter */ + + DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< FMPI2C locking object */ + + __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */ + + __IO HAL_FMPI2C_ErrorTypeDef ErrorCode; /* FMPI2C Error code */ + +}FMPI2C_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants + * @{ + */ + +/** @defgroup FMPI2C_addressing_mode FMPI2C addressing mode + * @{ + */ +#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001) +#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002) + +/** + * @} + */ + +/** @defgroup FMPI2C_dual_addressing_mode FMPI2C dual addressing mode + * @{ + */ + +#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000) +#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN + +/** + * @} + */ + +/** @defgroup FMPI2C_own_address2_masks FMPI2C own address2 masks + * @{ + */ + +#define FMPI2C_OA2_NOMASK ((uint8_t)0x00) +#define FMPI2C_OA2_MASK01 ((uint8_t)0x01) +#define FMPI2C_OA2_MASK02 ((uint8_t)0x02) +#define FMPI2C_OA2_MASK03 ((uint8_t)0x03) +#define FMPI2C_OA2_MASK04 ((uint8_t)0x04) +#define FMPI2C_OA2_MASK05 ((uint8_t)0x05) +#define FMPI2C_OA2_MASK06 ((uint8_t)0x06) +#define FMPI2C_OA2_MASK07 ((uint8_t)0x07) + +/** + * @} + */ + +/** @defgroup FMPI2C_general_call_addressing_mode FMPI2C general call addressing mode + * @{ + */ +#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000) +#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN + +/** + * @} + */ + +/** @defgroup FMPI2C_nostretch_mode FMPI2C nostretch mode + * @{ + */ +#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000) +#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH + +/** + * @} + */ + +/** @defgroup FMPI2C_Memory_Address_Size FMPI2C Memory Address Size + * @{ + */ +#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001) +#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002) + +/** + * @} + */ + +/** @defgroup FMPI2C_ReloadEndMode_definition FMPI2C ReloadEndMode definition + * @{ + */ + +#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD +#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND +#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000) + +/** + * @} + */ + +/** @defgroup FMPI2C_StartStopMode_definition FMPI2C StartStopMode definition + * @{ + */ + +#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000) +#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP +#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) +#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START + +/** + * @} + */ + +/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition + * @brief FMPI2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE +#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE +#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE +#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE +#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE +#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE +#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE + +/** + * @} + */ + + +/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition + * @{ + */ + +#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE +#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS +#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE +#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR +#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF +#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF +#define FMPI2C_FLAG_TC FMPI2C_ISR_TC +#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR +#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR +#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO +#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR +#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR +#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT +#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT +#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY +#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros + * @{ + */ + +/** @brief Reset FMPI2C handle state + * @param __HANDLE__: specifies the FMPI2C Handle. + * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. + * @retval None + */ +#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET) + +/** @brief Enables or disables the specified FMPI2C interrupts. + * @param __HANDLE__: specifies the FMPI2C Handle. + * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg FMPI2C_IT_ERRI: Errors interrupt enable + * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable + * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable + * @arg FMPI2C_IT_NACKI: NACK received interrupt enable + * @arg FMPI2C_IT_ADDRI: Address match interrupt enable + * @arg FMPI2C_IT_RXI: RX interrupt enable + * @arg FMPI2C_IT_TXI: TX interrupt enable + * + * @retval None + */ + +#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) +#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Checks if the specified FMPI2C interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the FMPI2C Handle. + * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. + * @param __INTERRUPT__: specifies the FMPI2C interrupt source to check. + * This parameter can be one of the following values: + * @arg FMPI2C_IT_ERRI: Errors interrupt enable + * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable + * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable + * @arg FMPI2C_IT_NACKI: NACK received interrupt enable + * @arg FMPI2C_IT_ADDRI: Address match interrupt enable + * @arg FMPI2C_IT_RXI: RX interrupt enable + * @arg FMPI2C_IT_TXI: TX interrupt enable + * + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified FMPI2C flag is set or not. + * @param __HANDLE__: specifies the FMPI2C Handle. + * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg FMPI2C_FLAG_TXE: Transmit data register empty + * @arg FMPI2C_FLAG_TXIS: Transmit interrupt status + * @arg FMPI2C_FLAG_RXNE: Receive data register not empty + * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode) + * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag + * @arg FMPI2C_FLAG_STOPF: STOP detection flag + * @arg FMPI2C_FLAG_TC: Transfer complete (master mode) + * @arg FMPI2C_FLAG_TCR: Transfer complete reload + * @arg FMPI2C_FLAG_BERR: Bus error + * @arg FMPI2C_FLAG_ARLO: Arbitration lost + * @arg FMPI2C_FLAG_OVR: Overrun/Underrun + * @arg FMPI2C_FLAG_PECERR: PEC error in reception + * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag + * @arg FMPI2C_FLAG_ALERT: SMBus alert + * @arg FMPI2C_FLAG_BUSY: Bus busy + * @arg FMPI2C_FLAG_DIR: Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == ((__FLAG__) & FMPI2C_FLAG_MASK))) + +/** @brief Clears the FMPI2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__: specifies the FMPI2C Handle. + * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode) + * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag + * @arg FMPI2C_FLAG_STOPF: STOP detection flag + * @arg FMPI2C_FLAG_BERR: Bus error + * @arg FMPI2C_FLAG_ARLO: Arbitration lost + * @arg FMPI2C_FLAG_OVR: Overrun/Underrun + * @arg FMPI2C_FLAG_PECERR: PEC error in reception + * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag + * @arg FMPI2C_FLAG_ALERT: SMBus alert + * + * @retval None + */ +#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & FMPI2C_FLAG_MASK)) + + +#define __HAL_FMPI2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= FMPI2C_CR1_PE) +#define __HAL_FMPI2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~FMPI2C_CR1_PE) + +#define __HAL_FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN))) + +#define __HAL_FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8))) +#define __HAL_FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) + +#define __HAL_FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN))) + +#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF) +#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF) + +/** + * @} + */ + +/* Include FMPI2C HAL Extension module */ +#include "stm32f4xx_hal_fmpi2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FMPI2C_Exported_Functions + * @{ + */ + +/** @addtogroup FMPI2C_Exported_Functions_Group1 + * @{ + */ + +/* Initialization/de-initialization functions**********************************/ +HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hFMPI2C); +HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hFMPI2C); + +/** + * @} + */ + +/** @addtogroup FMPI2C_Exported_Functions_Group2 + * @{ + */ + +/* I/O operation functions ***************************************************/ + /******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); + + /******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + + /******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + + /******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); +void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hFMPI2C); +/** + * @} + */ + +/** @addtogroup FMPI2C_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral State functions ************************************************/ +HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hFMPI2C); +uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hFMPI2C); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants + * @{ + */ +#define FMPI2C_FLAG_MASK ((uint32_t)0x0001FFFF) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FMPI2C_Private_Macros FMPI2C Private Macros + * @{ + */ + +#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT)) + +#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE)) + +#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \ + ((MASK) == FMPI2C_OA2_MASK01) || \ + ((MASK) == FMPI2C_OA2_MASK02) || \ + ((MASK) == FMPI2C_OA2_MASK03) || \ + ((MASK) == FMPI2C_OA2_MASK04) || \ + ((MASK) == FMPI2C_OA2_MASK05) || \ + ((MASK) == FMPI2C_OA2_MASK06) || \ + ((MASK) == FMPI2C_OA2_MASK07)) + +#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \ + ((CALL) == FMPI2C_GENERALCALL_ENABLE)) + +#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE)) + +#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \ + ((MODE) == FMPI2C_AUTOEND_MODE) || \ + ((MODE) == FMPI2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \ + ((REQUEST) == FMPI2C_GENERATE_START_READ) || \ + ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \ + ((REQUEST) == FMPI2C_NO_STARTSTOP)) + +/** + * @} + */ +/* Private functions ---------------------------------------------------------*/ +/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions + * @brief FMPI2C private functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32F446xx */ +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F4xx_HAL_FMPI2C_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/