Diff: TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/LPC11U24.ld

Revision:

81:7d30d6019079

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/LPC11U24.ld	Wed Mar 19 18:28:32 2014 +0000
@@ -0,0 +1,154 @@
+/* Linker script for mbed LPC1768 */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+  FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 32K
+  RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40
+  USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text.Reset_Handler)
+        *(.text.SystemInit)
+        
+        /* Only vectors and code running at reset are safe to be in first 512
+           bytes since RAM can be mapped into this area for RAM based interrupt
+           vectors. */
+        . = 0x00000200;
+        *(.text*)
+
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+
+    .ARM.extab : 
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+        
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE (__fini_array_end = .);
+
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM
+
+    .bss :
+    {
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        __bss_end__ = .;
+    } > RAM
+    
+    .heap :
+    {
+        __end__ = .;
+        end = __end__;
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy :
+    {
+        *(.stack)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+    
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}