Diff: TARGET_MOTE_L152RC/stm32l1xx_hal_i2s.h

Revision:

112:6f327212ef96

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MOTE_L152RC/stm32l1xx_hal_i2s.h	Wed Jan 13 09:48:29 2016 +0000
@@ -0,0 +1,454 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_hal_i2s.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    5-September-2014
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_I2S_H
+#define __STM32L1xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32L100xC) || \
+    defined(STM32L151xC) || defined(STM32L151xCA) || defined(STM32L151xD) || defined(STM32L151xE) || \
+    defined(STM32L152xC) || defined(STM32L152xCA) || defined(STM32L152xD) || defined(STM32L152xE) || defined(STM32L151xE) || \
+    defined(STM32L162xC) || defined(STM32L162xCA) || defined(STM32L162xD) || defined(STM32L162xE)
+    
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"  
+
+/** @addtogroup STM32L1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2S
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+  * @{
+  */
+
+/** 
+  * @brief I2S Init structure definition  
+  */
+typedef struct
+{
+  uint32_t Mode;         /*!< Specifies the I2S operating mode.
+                              This parameter can be a value of @ref I2S_Mode */
+
+  uint32_t Standard;     /*!< Specifies the standard used for the I2S communication.
+                              This parameter can be a value of @ref I2S_Standard */
+
+  uint32_t DataFormat;   /*!< Specifies the data format for the I2S communication.
+                              This parameter can be a value of @ref I2S_Data_Format */
+
+  uint32_t MCLKOutput;   /*!< Specifies whether the I2S MCLK output is enabled or not.
+                              This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t AudioFreq;    /*!< Specifies the frequency selected for the I2S communication.
+                              This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint32_t CPOL;         /*!< Specifies the idle state of the I2S clock.
+                              This parameter can be a value of @ref I2S_Clock_Polarity */
+
+}I2S_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition
+  */ 
+typedef enum
+{
+  HAL_I2S_STATE_RESET      = 0x00,  /*!< I2S not yet initialized or disabled                */
+  HAL_I2S_STATE_READY      = 0x01,  /*!< I2S initialized and ready for use                  */
+  HAL_I2S_STATE_BUSY       = 0x02,  /*!< I2S internal process is ongoing                    */   
+  HAL_I2S_STATE_BUSY_TX    = 0x12,  /*!< Data Transmission process is ongoing               */ 
+  HAL_I2S_STATE_BUSY_RX    = 0x22,  /*!< Data Reception process is ongoing                  */
+  HAL_I2S_STATE_TIMEOUT    = 0x03,  /*!< I2S pause state: used in case of DMA               */ 
+  HAL_I2S_STATE_ERROR      = 0x04   /*!< I2S error state                                    */      
+}HAL_I2S_StateTypeDef;
+
+/** 
+  * @brief  HAL I2S Error Code structure definition  
+  */ 
+typedef enum
+{
+  HAL_I2S_ERROR_NONE      = 0x00,    /*!< No error                    */
+  HAL_I2S_ERROR_UDR       = 0x01,    /*!< I2S Underrun error          */
+  HAL_I2S_ERROR_OVR       = 0x02,    /*!< I2S Overrun error           */
+  HAL_I2S_ERROR_FRE       = 0x04,    /*!< I2S Frame format error      */
+  HAL_I2S_ERROR_DMA       = 0x08     /*!< DMA transfer error          */
+}HAL_I2S_ErrorTypeDef;
+
+/** 
+  * @brief I2S handle Structure definition  
+  */
+typedef struct
+{
+  SPI_TypeDef                *Instance;    /* I2S registers base address        */
+
+  I2S_InitTypeDef            Init;         /* I2S communication parameters      */
+  
+  uint16_t                   *pTxBuffPtr;  /* Pointer to I2S Tx transfer buffer */
+  
+  __IO uint16_t              TxXferSize;   /* I2S Tx transfer size              */
+  
+  __IO uint16_t              TxXferCount;  /* I2S Tx transfer Counter           */
+  
+  uint16_t                   *pRxBuffPtr;  /* Pointer to I2S Rx transfer buffer */
+  
+  __IO uint16_t              RxXferSize;   /* I2S Rx transfer size              */
+  
+  __IO uint16_t              RxXferCount;  /* I2S Rx transfer counter 
+                                              (This field is initialized at the 
+                                               same value as transfer size at the 
+                                               beginning of the transfer and 
+                                               decremented when a sample is received. 
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+  DMA_HandleTypeDef          *hdmatx;      /* I2S Tx DMA handle parameters      */
+
+  DMA_HandleTypeDef          *hdmarx;      /* I2S Rx DMA handle parameters      */
+  
+  __IO HAL_LockTypeDef       Lock;         /* I2S locking object                */
+  
+  __IO HAL_I2S_StateTypeDef  State;        /* I2S communication state           */
+
+  __IO HAL_I2S_ErrorTypeDef  ErrorCode;    /* I2S Error code                    */
+
+}I2S_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+  * @{
+  */
+
+/** @defgroup I2S_Mode I2S Mode
+  * @{
+  */
+#define I2S_MODE_SLAVE_TX                ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX                ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX               ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX               ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX)  || \
+                           ((MODE) == I2S_MODE_SLAVE_RX)  || \
+                           ((MODE) == I2S_MODE_MASTER_TX) || \
+                           ((MODE) == I2S_MODE_MASTER_RX))
+/**
+  * @}
+  */
+  
+/** @defgroup I2S_Standard I2S Standard
+  * @{
+  */
+#define I2S_STANDARD_PHILIPS             ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB                 ((uint32_t) SPI_I2SCFGR_I2SSTD_0)
+#define I2S_STANDARD_LSB                 ((uint32_t) SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_SHORT           ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
+                                                     SPI_I2SCFGR_I2SSTD_1))
+#define I2S_STANDARD_PCM_LONG            ((uint32_t)(SPI_I2SCFGR_I2SSTD_0 |\
+                                                     SPI_I2SCFGR_I2SSTD_1 |\
+                                                     SPI_I2SCFGR_PCMSYNC))
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \
+                                   ((STANDARD) == I2S_STANDARD_MSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_LSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/** @defgroup I2S_Legacy I2S Legacy
+  * @{
+  */
+#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/** @defgroup I2S_Data_Format I2S Data Format
+  * @{
+  */
+#define I2S_DATAFORMAT_16B               ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED      ((uint32_t) SPI_I2SCFGR_CHLEN)
+#define I2S_DATAFORMAT_24B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0))
+#define I2S_DATAFORMAT_32B               ((uint32_t)(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+  * @{
+  */
+#define I2S_MCLKOUTPUT_ENABLE           ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE          ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+  * @{
+  */
+#define I2S_AUDIOFREQ_192K               ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K                ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K                ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K                ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K                ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K                ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K                ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K                ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K                 ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT            ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K)    && \
+                                  ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+                                  ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+  * @{
+  */
+#define I2S_CPOL_LOW                    ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH                   ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+                           ((CPOL) == I2S_CPOL_HIGH))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
+  * @{
+  */
+#define I2S_IT_TXE                      SPI_CR2_TXEIE
+#define I2S_IT_RXNE                     SPI_CR2_RXNEIE
+#define I2S_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Flag_definition I2S Flag definition
+  * @{
+  */
+#define I2S_FLAG_TXE                    SPI_SR_TXE
+#define I2S_FLAG_RXNE                   SPI_SR_RXNE
+
+#define I2S_FLAG_UDR                    SPI_SR_UDR
+#define I2S_FLAG_OVR                    SPI_SR_OVR
+#define I2S_FLAG_FRE                    SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE
+#define I2S_FLAG_BSY                    SPI_SR_BSY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+  * @{
+  */
+
+/** @brief  Reset I2S handle state
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief  Enable or disable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__: specifies the I2S Handle. 
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE(__HANDLE__)    (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+
+/** @brief  Enable or disable the specified I2S interrupts.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval None
+  */  
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__)    (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__)))
+ 
+/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2S flag is set or not.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
+  *            @arg I2S_FLAG_UDR: Underrun flag
+  *            @arg I2S_FLAG_OVR: Overrun flag
+  *            @arg I2S_FLAG_FRE: Frame error flag
+  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
+  *            @arg I2S_FLAG_BSY: Busy flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */                                                                                                   
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
+                                                             tmpreg = (__HANDLE__)->Instance->SR;\
+                                              }while(0)
+/** @brief Clears the I2S UDR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+/**
+  * @}
+  */ 
+                                                
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+  * @{
+  */
+                                                
+/** @addtogroup I2S_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* STM32L100xC ||
+          STM32L151xC || STM32L151xCA || STM32L151xD || STM32L151xE ||\\
+          STM32L152xC || STM32L152xCA || STM32L152xD || STM32L152xE || STM32L151xE ||\\
+          STM32L162xC || STM32L162xCA || STM32L162xD || STM32L162xE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/