Elijah Orr
Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F103RB/stm32f10x_usart.h
- Revision:
- 96:487b796308b0
- Parent:
- 95:7e07b6fb45cf
- Child:
- 97:433970e64889
--- a/TARGET_NUCLEO_F103RB/stm32f10x_usart.h Wed Mar 04 07:31:39 2015 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,438 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f10x_usart.h
- * @author MCD Application Team
- * @version V3.6.1
- * @date 05-March-2012
- * @brief This file contains all the functions prototypes for the USART
- * firmware library.
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_USART_H
-#define __STM32F10x_USART_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
- * @{
- */
-
-/** @addtogroup USART
- * @{
- */
-
-/** @defgroup USART_Exported_Types
- * @{
- */
-
-/**
- * @brief USART Init Structure definition
- */
-
-typedef struct
-{
- uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
- The baud rate is computed using the following formula:
- - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
- - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */
-
- uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref USART_Word_Length */
-
- uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
- This parameter can be a value of @ref USART_Stop_Bits */
-
- uint16_t USART_Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref USART_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
-
- uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref USART_Mode */
-
- uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
- or disabled.
- This parameter can be a value of @ref USART_Hardware_Flow_Control */
-} USART_InitTypeDef;
-
-/**
- * @brief USART Clock Init Structure definition
- */
-
-typedef struct
-{
-
- uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
- This parameter can be a value of @ref USART_Clock */
-
- uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock.
- This parameter can be a value of @ref USART_Clock_Polarity */
-
- uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
- This parameter can be a value of @ref USART_Clock_Phase */
-
- uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
- data bit (MSB) has to be output on the SCLK pin in synchronous mode.
- This parameter can be a value of @ref USART_Last_Bit */
-} USART_ClockInitTypeDef;
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Constants
- * @{
- */
-
-#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
- ((PERIPH) == USART2) || \
- ((PERIPH) == USART3) || \
- ((PERIPH) == UART4) || \
- ((PERIPH) == UART5))
-
-#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
- ((PERIPH) == USART2) || \
- ((PERIPH) == USART3))
-
-#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
- ((PERIPH) == USART2) || \
- ((PERIPH) == USART3) || \
- ((PERIPH) == UART4))
-/** @defgroup USART_Word_Length
- * @{
- */
-
-#define USART_WordLength_8b ((uint16_t)0x0000)
-#define USART_WordLength_9b ((uint16_t)0x1000)
-
-#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
- ((LENGTH) == USART_WordLength_9b))
-/**
- * @}
- */
-
-/** @defgroup USART_Stop_Bits
- * @{
- */
-
-#define USART_StopBits_1 ((uint16_t)0x0000)
-#define USART_StopBits_0_5 ((uint16_t)0x1000)
-#define USART_StopBits_2 ((uint16_t)0x2000)
-#define USART_StopBits_1_5 ((uint16_t)0x3000)
-#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
- ((STOPBITS) == USART_StopBits_0_5) || \
- ((STOPBITS) == USART_StopBits_2) || \
- ((STOPBITS) == USART_StopBits_1_5))
-/**
- * @}
- */
-
-/** @defgroup USART_Parity
- * @{
- */
-
-#define USART_Parity_No ((uint16_t)0x0000)
-#define USART_Parity_Even ((uint16_t)0x0400)
-#define USART_Parity_Odd ((uint16_t)0x0600)
-#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
- ((PARITY) == USART_Parity_Even) || \
- ((PARITY) == USART_Parity_Odd))
-/**
- * @}
- */
-
-/** @defgroup USART_Mode
- * @{
- */
-
-#define USART_Mode_Rx ((uint16_t)0x0004)
-#define USART_Mode_Tx ((uint16_t)0x0008)
-#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
-/**
- * @}
- */
-
-/** @defgroup USART_Hardware_Flow_Control
- * @{
- */
-#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
-#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
-#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
-#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
-#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
- (((CONTROL) == USART_HardwareFlowControl_None) || \
- ((CONTROL) == USART_HardwareFlowControl_RTS) || \
- ((CONTROL) == USART_HardwareFlowControl_CTS) || \
- ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
-/**
- * @}
- */
-
-/** @defgroup USART_Clock
- * @{
- */
-#define USART_Clock_Disable ((uint16_t)0x0000)
-#define USART_Clock_Enable ((uint16_t)0x0800)
-#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
- ((CLOCK) == USART_Clock_Enable))
-/**
- * @}
- */
-
-/** @defgroup USART_Clock_Polarity
- * @{
- */
-
-#define USART_CPOL_Low ((uint16_t)0x0000)
-#define USART_CPOL_High ((uint16_t)0x0400)
-#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
-
-/**
- * @}
- */
-
-/** @defgroup USART_Clock_Phase
- * @{
- */
-
-#define USART_CPHA_1Edge ((uint16_t)0x0000)
-#define USART_CPHA_2Edge ((uint16_t)0x0200)
-#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
-
-/**
- * @}
- */
-
-/** @defgroup USART_Last_Bit
- * @{
- */
-
-#define USART_LastBit_Disable ((uint16_t)0x0000)
-#define USART_LastBit_Enable ((uint16_t)0x0100)
-#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
- ((LASTBIT) == USART_LastBit_Enable))
-/**
- * @}
- */
-
-/** @defgroup USART_Interrupt_definition
- * @{
- */
-
-#define USART_IT_PE ((uint16_t)0x0028)
-#define USART_IT_TXE ((uint16_t)0x0727)
-#define USART_IT_TC ((uint16_t)0x0626)
-#define USART_IT_RXNE ((uint16_t)0x0525)
-#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
-#define USART_IT_IDLE ((uint16_t)0x0424)
-#define USART_IT_LBD ((uint16_t)0x0846)
-#define USART_IT_CTS ((uint16_t)0x096A)
-#define USART_IT_ERR ((uint16_t)0x0060)
-#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
-#define USART_IT_NE ((uint16_t)0x0260)
-#define USART_IT_FE ((uint16_t)0x0160)
-
-/** @defgroup USART_Legacy
- * @{
- */
-#define USART_IT_ORE USART_IT_ORE_ER
-/**
- * @}
- */
-
-#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
- ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
- ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
- ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
-
-#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
- ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
- ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
- ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
- ((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \
- ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
-
-#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
- ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
-/**
- * @}
- */
-
-/** @defgroup USART_DMA_Requests
- * @{
- */
-
-#define USART_DMAReq_Tx ((uint16_t)0x0080)
-#define USART_DMAReq_Rx ((uint16_t)0x0040)
-#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
-
-/**
- * @}
- */
-
-/** @defgroup USART_WakeUp_methods
- * @{
- */
-
-#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
-#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
-#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
- ((WAKEUP) == USART_WakeUp_AddressMark))
-/**
- * @}
- */
-
-/** @defgroup USART_LIN_Break_Detection_Length
- * @{
- */
-
-#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
-#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
-#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
- (((LENGTH) == USART_LINBreakDetectLength_10b) || \
- ((LENGTH) == USART_LINBreakDetectLength_11b))
-/**
- * @}
- */
-
-/** @defgroup USART_IrDA_Low_Power
- * @{
- */
-
-#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
-#define USART_IrDAMode_Normal ((uint16_t)0x0000)
-#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
- ((MODE) == USART_IrDAMode_Normal))
-/**
- * @}
- */
-
-/** @defgroup USART_Flags
- * @{
- */
-
-#define USART_FLAG_CTS ((uint16_t)0x0200)
-#define USART_FLAG_LBD ((uint16_t)0x0100)
-#define USART_FLAG_TXE ((uint16_t)0x0080)
-#define USART_FLAG_TC ((uint16_t)0x0040)
-#define USART_FLAG_RXNE ((uint16_t)0x0020)
-#define USART_FLAG_IDLE ((uint16_t)0x0010)
-#define USART_FLAG_ORE ((uint16_t)0x0008)
-#define USART_FLAG_NE ((uint16_t)0x0004)
-#define USART_FLAG_FE ((uint16_t)0x0002)
-#define USART_FLAG_PE ((uint16_t)0x0001)
-#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
- ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
- ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
- ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
- ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
-
-#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
-
-#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21))
-#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
-#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Functions
- * @{
- */
-
-void USART_DeInit(USART_TypeDef* USARTx);
-void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
-void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
-void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
-void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
-void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
-void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
-void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
-void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
-void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
-void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
-uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
-void USART_SendBreak(USART_TypeDef* USARTx);
-void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
-void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
-void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
-void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
-void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
-FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
-void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
-ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
-void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_USART_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/