Diff: TARGET_SAMR21G18A/status_codes.h

Revision:

111:4336505e4b1c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMR21G18A/status_codes.h	Tue Dec 15 14:39:38 2015 +0000
@@ -0,0 +1,109 @@
+#ifndef STATUS_CODES_H_INCLUDED
+#define STATUS_CODES_H_INCLUDED
+
+#include <stdint.h>
+
+/**
+ * \defgroup group_sam0_utils_status_codes Status Codes
+ *
+ * \ingroup group_sam0_utils
+ *
+ * @{
+ */
+
+/** Mask to retrieve the error category of a status code. */
+#define STATUS_CATEGORY_MASK  0xF0
+
+/** Mask to retrieve the error code within the category of a status code. */
+#define STATUS_ERROR_MASK     0x0F
+
+/** Status code error categories. */
+enum status_categories {
+    STATUS_CATEGORY_OK                = 0x00,
+    STATUS_CATEGORY_COMMON            = 0x10,
+    STATUS_CATEGORY_ANALOG            = 0x30,
+    STATUS_CATEGORY_COM               = 0x40,
+    STATUS_CATEGORY_IO                = 0x50,
+};
+
+/**
+ * Status code that may be returned by shell commands and protocol
+ * implementations.
+ *
+ * \note Any change to these status codes and the corresponding
+ * message strings is strictly forbidden. New codes can be added,
+ * however, but make sure that any message string tables are updated
+ * at the same time.
+ */
+enum status_code {
+    STATUS_OK                         = STATUS_CATEGORY_OK     | 0x00,
+    STATUS_VALID_DATA                 = STATUS_CATEGORY_OK     | 0x01,
+    STATUS_NO_CHANGE                  = STATUS_CATEGORY_OK     | 0x02,
+    STATUS_ABORTED                    = STATUS_CATEGORY_OK     | 0x04,
+    STATUS_BUSY                       = STATUS_CATEGORY_OK     | 0x05,
+    STATUS_SUSPEND                    = STATUS_CATEGORY_OK     | 0x06,
+
+    STATUS_ERR_IO                     = STATUS_CATEGORY_COMMON | 0x00,
+    STATUS_ERR_REQ_FLUSHED            = STATUS_CATEGORY_COMMON | 0x01,
+    STATUS_ERR_TIMEOUT                = STATUS_CATEGORY_COMMON | 0x02,
+    STATUS_ERR_BAD_DATA               = STATUS_CATEGORY_COMMON | 0x03,
+    STATUS_ERR_NOT_FOUND              = STATUS_CATEGORY_COMMON | 0x04,
+    STATUS_ERR_UNSUPPORTED_DEV        = STATUS_CATEGORY_COMMON | 0x05,
+    STATUS_ERR_NO_MEMORY              = STATUS_CATEGORY_COMMON | 0x06,
+    STATUS_ERR_INVALID_ARG            = STATUS_CATEGORY_COMMON | 0x07,
+    STATUS_ERR_BAD_ADDRESS            = STATUS_CATEGORY_COMMON | 0x08,
+    STATUS_ERR_BAD_FORMAT             = STATUS_CATEGORY_COMMON | 0x0A,
+    STATUS_ERR_BAD_FRQ                = STATUS_CATEGORY_COMMON | 0x0B,
+    STATUS_ERR_DENIED                 = STATUS_CATEGORY_COMMON | 0x0c,
+    STATUS_ERR_ALREADY_INITIALIZED    = STATUS_CATEGORY_COMMON | 0x0d,
+    STATUS_ERR_OVERFLOW               = STATUS_CATEGORY_COMMON | 0x0e,
+    STATUS_ERR_NOT_INITIALIZED        = STATUS_CATEGORY_COMMON | 0x0f,
+
+    STATUS_ERR_SAMPLERATE_UNAVAILABLE = STATUS_CATEGORY_ANALOG | 0x00,
+    STATUS_ERR_RESOLUTION_UNAVAILABLE = STATUS_CATEGORY_ANALOG | 0x01,
+
+    STATUS_ERR_BAUDRATE_UNAVAILABLE   = STATUS_CATEGORY_COM    | 0x00,
+    STATUS_ERR_PACKET_COLLISION       = STATUS_CATEGORY_COM    | 0x01,
+    STATUS_ERR_PROTOCOL               = STATUS_CATEGORY_COM    | 0x02,
+
+    STATUS_ERR_PIN_MUX_INVALID        = STATUS_CATEGORY_IO     | 0x00,
+};
+typedef enum status_code status_code_genare_t;
+
+/**
+  Status codes used by MAC stack.
+ */
+enum status_code_wireless {
+    //STATUS_OK               =  0, //!< Success
+    ERR_IO_ERROR            =  -1, //!< I/O error
+    ERR_FLUSHED             =  -2, //!< Request flushed from queue
+    ERR_TIMEOUT             =  -3, //!< Operation timed out
+    ERR_BAD_DATA            =  -4, //!< Data integrity check failed
+    ERR_PROTOCOL            =  -5, //!< Protocol error
+    ERR_UNSUPPORTED_DEV     =  -6, //!< Unsupported device
+    ERR_NO_MEMORY           =  -7, //!< Insufficient memory
+    ERR_INVALID_ARG         =  -8, //!< Invalid argument
+    ERR_BAD_ADDRESS         =  -9, //!< Bad address
+    ERR_BUSY                =  -10, //!< Resource is busy
+    ERR_BAD_FORMAT          =  -11, //!< Data format not recognized
+    ERR_NO_TIMER            =  -12, //!< No timer available
+    ERR_TIMER_ALREADY_RUNNING   =  -13, //!< Timer already running
+    ERR_TIMER_NOT_RUNNING   =  -14, //!< Timer not running
+
+    /**
+     * \brief Operation in progress
+     *
+     * This status code is for driver-internal use when an operation
+     * is currently being performed.
+     *
+     * \note Drivers should never return this status code to any
+     * callers. It is strictly for internal use.
+     */
+    OPERATION_IN_PROGRESS	= -128,
+};
+
+typedef enum status_code_wireless status_code_t;
+
+/** @} */
+
+#endif /* STATUS_CODES_H_INCLUDED */