Elijah Orr / mbed-renbed

Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.

Dependents:   1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB

Fork of mbed by mbed official

Diff: TARGET_SAMD21G18A/ins_sercom3.h

Revision:
111:4336505e4b1c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21G18A/ins_sercom3.h	Tue Dec 15 14:39:38 2015 +0000
@@ -0,0 +1,146 @@
+/**
+ * \file
+ *
+ * \brief Instance description for SERCOM3
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_SERCOM3_INSTANCE_
+#define _SAMD21_SERCOM3_INSTANCE_
+
+/* ========== Register definition for SERCOM3 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_SERCOM3_I2CM_CTRLA     (0x42001400U) /**< \brief (SERCOM3) I2CM Control A */
+#define REG_SERCOM3_I2CM_CTRLB     (0x42001404U) /**< \brief (SERCOM3) I2CM Control B */
+#define REG_SERCOM3_I2CM_BAUD      (0x4200140CU) /**< \brief (SERCOM3) I2CM Baud Rate */
+#define REG_SERCOM3_I2CM_INTENCLR  (0x42001414U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
+#define REG_SERCOM3_I2CM_INTENSET  (0x42001416U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
+#define REG_SERCOM3_I2CM_INTFLAG   (0x42001418U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CM_STATUS    (0x4200141AU) /**< \brief (SERCOM3) I2CM Status */
+#define REG_SERCOM3_I2CM_SYNCBUSY  (0x4200141CU) /**< \brief (SERCOM3) I2CM Syncbusy */
+#define REG_SERCOM3_I2CM_ADDR      (0x42001424U) /**< \brief (SERCOM3) I2CM Address */
+#define REG_SERCOM3_I2CM_DATA      (0x42001428U) /**< \brief (SERCOM3) I2CM Data */
+#define REG_SERCOM3_I2CM_DBGCTRL   (0x42001430U) /**< \brief (SERCOM3) I2CM Debug Control */
+#define REG_SERCOM3_I2CS_CTRLA     (0x42001400U) /**< \brief (SERCOM3) I2CS Control A */
+#define REG_SERCOM3_I2CS_CTRLB     (0x42001404U) /**< \brief (SERCOM3) I2CS Control B */
+#define REG_SERCOM3_I2CS_INTENCLR  (0x42001414U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
+#define REG_SERCOM3_I2CS_INTENSET  (0x42001416U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
+#define REG_SERCOM3_I2CS_INTFLAG   (0x42001418U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CS_STATUS    (0x4200141AU) /**< \brief (SERCOM3) I2CS Status */
+#define REG_SERCOM3_I2CS_SYNCBUSY  (0x4200141CU) /**< \brief (SERCOM3) I2CS Syncbusy */
+#define REG_SERCOM3_I2CS_ADDR      (0x42001424U) /**< \brief (SERCOM3) I2CS Address */
+#define REG_SERCOM3_I2CS_DATA      (0x42001428U) /**< \brief (SERCOM3) I2CS Data */
+#define REG_SERCOM3_SPI_CTRLA      (0x42001400U) /**< \brief (SERCOM3) SPI Control A */
+#define REG_SERCOM3_SPI_CTRLB      (0x42001404U) /**< \brief (SERCOM3) SPI Control B */
+#define REG_SERCOM3_SPI_BAUD       (0x4200140CU) /**< \brief (SERCOM3) SPI Baud Rate */
+#define REG_SERCOM3_SPI_INTENCLR   (0x42001414U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
+#define REG_SERCOM3_SPI_INTENSET   (0x42001416U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
+#define REG_SERCOM3_SPI_INTFLAG    (0x42001418U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
+#define REG_SERCOM3_SPI_STATUS     (0x4200141AU) /**< \brief (SERCOM3) SPI Status */
+#define REG_SERCOM3_SPI_SYNCBUSY   (0x4200141CU) /**< \brief (SERCOM3) SPI Syncbusy */
+#define REG_SERCOM3_SPI_ADDR       (0x42001424U) /**< \brief (SERCOM3) SPI Address */
+#define REG_SERCOM3_SPI_DATA       (0x42001428U) /**< \brief (SERCOM3) SPI Data */
+#define REG_SERCOM3_SPI_DBGCTRL    (0x42001430U) /**< \brief (SERCOM3) SPI Debug Control */
+#define REG_SERCOM3_USART_CTRLA    (0x42001400U) /**< \brief (SERCOM3) USART Control A */
+#define REG_SERCOM3_USART_CTRLB    (0x42001404U) /**< \brief (SERCOM3) USART Control B */
+#define REG_SERCOM3_USART_BAUD     (0x4200140CU) /**< \brief (SERCOM3) USART Baud Rate */
+#define REG_SERCOM3_USART_RXPL     (0x4200140EU) /**< \brief (SERCOM3) USART Receive Pulse Length */
+#define REG_SERCOM3_USART_INTENCLR (0x42001414U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
+#define REG_SERCOM3_USART_INTENSET (0x42001416U) /**< \brief (SERCOM3) USART Interrupt Enable Set */
+#define REG_SERCOM3_USART_INTFLAG  (0x42001418U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
+#define REG_SERCOM3_USART_STATUS   (0x4200141AU) /**< \brief (SERCOM3) USART Status */
+#define REG_SERCOM3_USART_SYNCBUSY (0x4200141CU) /**< \brief (SERCOM3) USART Syncbusy */
+#define REG_SERCOM3_USART_DATA     (0x42001428U) /**< \brief (SERCOM3) USART Data */
+#define REG_SERCOM3_USART_DBGCTRL  (0x42001430U) /**< \brief (SERCOM3) USART Debug Control */
+#else
+#define REG_SERCOM3_I2CM_CTRLA     (*(RwReg  *)0x42001400U) /**< \brief (SERCOM3) I2CM Control A */
+#define REG_SERCOM3_I2CM_CTRLB     (*(RwReg  *)0x42001404U) /**< \brief (SERCOM3) I2CM Control B */
+#define REG_SERCOM3_I2CM_BAUD      (*(RwReg  *)0x4200140CU) /**< \brief (SERCOM3) I2CM Baud Rate */
+#define REG_SERCOM3_I2CM_INTENCLR  (*(RwReg8 *)0x42001414U) /**< \brief (SERCOM3) I2CM Interrupt Enable Clear */
+#define REG_SERCOM3_I2CM_INTENSET  (*(RwReg8 *)0x42001416U) /**< \brief (SERCOM3) I2CM Interrupt Enable Set */
+#define REG_SERCOM3_I2CM_INTFLAG   (*(RwReg8 *)0x42001418U) /**< \brief (SERCOM3) I2CM Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CM_STATUS    (*(RwReg16*)0x4200141AU) /**< \brief (SERCOM3) I2CM Status */
+#define REG_SERCOM3_I2CM_SYNCBUSY  (*(RoReg  *)0x4200141CU) /**< \brief (SERCOM3) I2CM Syncbusy */
+#define REG_SERCOM3_I2CM_ADDR      (*(RwReg  *)0x42001424U) /**< \brief (SERCOM3) I2CM Address */
+#define REG_SERCOM3_I2CM_DATA      (*(RwReg8 *)0x42001428U) /**< \brief (SERCOM3) I2CM Data */
+#define REG_SERCOM3_I2CM_DBGCTRL   (*(RwReg8 *)0x42001430U) /**< \brief (SERCOM3) I2CM Debug Control */
+#define REG_SERCOM3_I2CS_CTRLA     (*(RwReg  *)0x42001400U) /**< \brief (SERCOM3) I2CS Control A */
+#define REG_SERCOM3_I2CS_CTRLB     (*(RwReg  *)0x42001404U) /**< \brief (SERCOM3) I2CS Control B */
+#define REG_SERCOM3_I2CS_INTENCLR  (*(RwReg8 *)0x42001414U) /**< \brief (SERCOM3) I2CS Interrupt Enable Clear */
+#define REG_SERCOM3_I2CS_INTENSET  (*(RwReg8 *)0x42001416U) /**< \brief (SERCOM3) I2CS Interrupt Enable Set */
+#define REG_SERCOM3_I2CS_INTFLAG   (*(RwReg8 *)0x42001418U) /**< \brief (SERCOM3) I2CS Interrupt Flag Status and Clear */
+#define REG_SERCOM3_I2CS_STATUS    (*(RwReg16*)0x4200141AU) /**< \brief (SERCOM3) I2CS Status */
+#define REG_SERCOM3_I2CS_SYNCBUSY  (*(RoReg  *)0x4200141CU) /**< \brief (SERCOM3) I2CS Syncbusy */
+#define REG_SERCOM3_I2CS_ADDR      (*(RwReg  *)0x42001424U) /**< \brief (SERCOM3) I2CS Address */
+#define REG_SERCOM3_I2CS_DATA      (*(RwReg8 *)0x42001428U) /**< \brief (SERCOM3) I2CS Data */
+#define REG_SERCOM3_SPI_CTRLA      (*(RwReg  *)0x42001400U) /**< \brief (SERCOM3) SPI Control A */
+#define REG_SERCOM3_SPI_CTRLB      (*(RwReg  *)0x42001404U) /**< \brief (SERCOM3) SPI Control B */
+#define REG_SERCOM3_SPI_BAUD       (*(RwReg8 *)0x4200140CU) /**< \brief (SERCOM3) SPI Baud Rate */
+#define REG_SERCOM3_SPI_INTENCLR   (*(RwReg8 *)0x42001414U) /**< \brief (SERCOM3) SPI Interrupt Enable Clear */
+#define REG_SERCOM3_SPI_INTENSET   (*(RwReg8 *)0x42001416U) /**< \brief (SERCOM3) SPI Interrupt Enable Set */
+#define REG_SERCOM3_SPI_INTFLAG    (*(RwReg8 *)0x42001418U) /**< \brief (SERCOM3) SPI Interrupt Flag Status and Clear */
+#define REG_SERCOM3_SPI_STATUS     (*(RwReg16*)0x4200141AU) /**< \brief (SERCOM3) SPI Status */
+#define REG_SERCOM3_SPI_SYNCBUSY   (*(RoReg  *)0x4200141CU) /**< \brief (SERCOM3) SPI Syncbusy */
+#define REG_SERCOM3_SPI_ADDR       (*(RwReg  *)0x42001424U) /**< \brief (SERCOM3) SPI Address */
+#define REG_SERCOM3_SPI_DATA       (*(RwReg  *)0x42001428U) /**< \brief (SERCOM3) SPI Data */
+#define REG_SERCOM3_SPI_DBGCTRL    (*(RwReg8 *)0x42001430U) /**< \brief (SERCOM3) SPI Debug Control */
+#define REG_SERCOM3_USART_CTRLA    (*(RwReg  *)0x42001400U) /**< \brief (SERCOM3) USART Control A */
+#define REG_SERCOM3_USART_CTRLB    (*(RwReg  *)0x42001404U) /**< \brief (SERCOM3) USART Control B */
+#define REG_SERCOM3_USART_BAUD     (*(RwReg16*)0x4200140CU) /**< \brief (SERCOM3) USART Baud Rate */
+#define REG_SERCOM3_USART_RXPL     (*(RwReg8 *)0x4200140EU) /**< \brief (SERCOM3) USART Receive Pulse Length */
+#define REG_SERCOM3_USART_INTENCLR (*(RwReg8 *)0x42001414U) /**< \brief (SERCOM3) USART Interrupt Enable Clear */
+#define REG_SERCOM3_USART_INTENSET (*(RwReg8 *)0x42001416U) /**< \brief (SERCOM3) USART Interrupt Enable Set */
+#define REG_SERCOM3_USART_INTFLAG  (*(RwReg8 *)0x42001418U) /**< \brief (SERCOM3) USART Interrupt Flag Status and Clear */
+#define REG_SERCOM3_USART_STATUS   (*(RwReg16*)0x4200141AU) /**< \brief (SERCOM3) USART Status */
+#define REG_SERCOM3_USART_SYNCBUSY (*(RoReg  *)0x4200141CU) /**< \brief (SERCOM3) USART Syncbusy */
+#define REG_SERCOM3_USART_DATA     (*(RwReg16*)0x42001428U) /**< \brief (SERCOM3) USART Data */
+#define REG_SERCOM3_USART_DBGCTRL  (*(RwReg8 *)0x42001430U) /**< \brief (SERCOM3) USART Debug Control */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for SERCOM3 peripheral ========== */
+#define SERCOM3_DMAC_ID_RX          7        // Index of DMA RX trigger
+#define SERCOM3_DMAC_ID_TX          8        // Index of DMA TX trigger
+#define SERCOM3_GCLK_ID_CORE        23       // Index of Generic Clock for Core
+#define SERCOM3_GCLK_ID_SLOW        19       // Index of Generic Clock for SMbus timeout
+#define SERCOM3_INT_MSB             6
+
+#endif /* _SAMD21_SERCOM3_INSTANCE_ */