Diff: TARGET_SAMD21G18A/ins_adc.h

Revision:

111:4336505e4b1c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21G18A/ins_adc.h	Tue Dec 15 14:39:38 2015 +0000
@@ -0,0 +1,102 @@
+/**
+ * \file
+ *
+ * \brief Instance description for ADC
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_ADC_INSTANCE_
+#define _SAMD21_ADC_INSTANCE_
+
+/* ========== Register definition for ADC peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_ADC_CTRLA              (0x42004000U) /**< \brief (ADC) Control A */
+#define REG_ADC_REFCTRL            (0x42004001U) /**< \brief (ADC) Reference Control */
+#define REG_ADC_AVGCTRL            (0x42004002U) /**< \brief (ADC) Average Control */
+#define REG_ADC_SAMPCTRL           (0x42004003U) /**< \brief (ADC) Sampling Time Control */
+#define REG_ADC_CTRLB              (0x42004004U) /**< \brief (ADC) Control B */
+#define REG_ADC_WINCTRL            (0x42004008U) /**< \brief (ADC) Window Monitor Control */
+#define REG_ADC_SWTRIG             (0x4200400CU) /**< \brief (ADC) Software Trigger */
+#define REG_ADC_INPUTCTRL          (0x42004010U) /**< \brief (ADC) Input Control */
+#define REG_ADC_EVCTRL             (0x42004014U) /**< \brief (ADC) Event Control */
+#define REG_ADC_INTENCLR           (0x42004016U) /**< \brief (ADC) Interrupt Enable Clear */
+#define REG_ADC_INTENSET           (0x42004017U) /**< \brief (ADC) Interrupt Enable Set */
+#define REG_ADC_INTFLAG            (0x42004018U) /**< \brief (ADC) Interrupt Flag Status and Clear */
+#define REG_ADC_STATUS             (0x42004019U) /**< \brief (ADC) Status */
+#define REG_ADC_RESULT             (0x4200401AU) /**< \brief (ADC) Result */
+#define REG_ADC_WINLT              (0x4200401CU) /**< \brief (ADC) Window Monitor Lower Threshold */
+#define REG_ADC_WINUT              (0x42004020U) /**< \brief (ADC) Window Monitor Upper Threshold */
+#define REG_ADC_GAINCORR           (0x42004024U) /**< \brief (ADC) Gain Correction */
+#define REG_ADC_OFFSETCORR         (0x42004026U) /**< \brief (ADC) Offset Correction */
+#define REG_ADC_CALIB              (0x42004028U) /**< \brief (ADC) Calibration */
+#define REG_ADC_DBGCTRL            (0x4200402AU) /**< \brief (ADC) Debug Control */
+#else
+#define REG_ADC_CTRLA              (*(RwReg8 *)0x42004000U) /**< \brief (ADC) Control A */
+#define REG_ADC_REFCTRL            (*(RwReg8 *)0x42004001U) /**< \brief (ADC) Reference Control */
+#define REG_ADC_AVGCTRL            (*(RwReg8 *)0x42004002U) /**< \brief (ADC) Average Control */
+#define REG_ADC_SAMPCTRL           (*(RwReg8 *)0x42004003U) /**< \brief (ADC) Sampling Time Control */
+#define REG_ADC_CTRLB              (*(RwReg16*)0x42004004U) /**< \brief (ADC) Control B */
+#define REG_ADC_WINCTRL            (*(RwReg8 *)0x42004008U) /**< \brief (ADC) Window Monitor Control */
+#define REG_ADC_SWTRIG             (*(RwReg8 *)0x4200400CU) /**< \brief (ADC) Software Trigger */
+#define REG_ADC_INPUTCTRL          (*(RwReg  *)0x42004010U) /**< \brief (ADC) Input Control */
+#define REG_ADC_EVCTRL             (*(RwReg8 *)0x42004014U) /**< \brief (ADC) Event Control */
+#define REG_ADC_INTENCLR           (*(RwReg8 *)0x42004016U) /**< \brief (ADC) Interrupt Enable Clear */
+#define REG_ADC_INTENSET           (*(RwReg8 *)0x42004017U) /**< \brief (ADC) Interrupt Enable Set */
+#define REG_ADC_INTFLAG            (*(RwReg8 *)0x42004018U) /**< \brief (ADC) Interrupt Flag Status and Clear */
+#define REG_ADC_STATUS             (*(RoReg8 *)0x42004019U) /**< \brief (ADC) Status */
+#define REG_ADC_RESULT             (*(RoReg16*)0x4200401AU) /**< \brief (ADC) Result */
+#define REG_ADC_WINLT              (*(RwReg16*)0x4200401CU) /**< \brief (ADC) Window Monitor Lower Threshold */
+#define REG_ADC_WINUT              (*(RwReg16*)0x42004020U) /**< \brief (ADC) Window Monitor Upper Threshold */
+#define REG_ADC_GAINCORR           (*(RwReg16*)0x42004024U) /**< \brief (ADC) Gain Correction */
+#define REG_ADC_OFFSETCORR         (*(RwReg16*)0x42004026U) /**< \brief (ADC) Offset Correction */
+#define REG_ADC_CALIB              (*(RwReg16*)0x42004028U) /**< \brief (ADC) Calibration */
+#define REG_ADC_DBGCTRL            (*(RwReg8 *)0x4200402AU) /**< \brief (ADC) Debug Control */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for ADC peripheral ========== */
+#define ADC_DMAC_ID_RESRDY          39       // Index of DMA RESRDY trigger
+#define ADC_EXTCHANNEL_MSB          19       // Number of external channels
+#define ADC_GCLK_ID                 30       // Index of Generic Clock
+#define ADC_RESULT_BITS             16       // Size of RESULT.RESULT bitfield
+#define ADC_RESULT_MSB              15       // Size of Result
+
+#endif /* _SAMD21_ADC_INSTANCE_ */