Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
Diff: TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h Wed Sep 16 15:32:31 2015 +0100 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h Fri Oct 02 07:35:07 2015 +0200 @@ -2,13 +2,13 @@ ****************************************************************************** * @file stm32f0xx_hal_uart_ex.h * @author MCD Application Team - * @version V1.2.0 - * @date 11-December-2014 + * @version V1.3.0 + * @date 26-June-2015 * @brief Header file of UART HAL Extension module. ****************************************************************************** * @attention * - * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: @@ -32,7 +32,7 @@ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - ****************************************************************************** + ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ @@ -52,29 +52,30 @@ /** @addtogroup UARTEx * @{ - */ + */ /* Exported types ------------------------------------------------------------*/ #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) /** @defgroup UARTEx_Exported_Types UARTEx Exported Types * @{ - */ - -/** - * @brief UART wake up from stop mode parameters */ -typedef struct + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct { uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF). This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must be filled up. */ - + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. This parameter can be a value of @ref UART_WakeUp_Address_Length */ - + uint8_t Address; /*!< UART/USART node address (7-bit long max) */ } UART_WakeUpTypeDef; + /** * @} */ @@ -84,7 +85,7 @@ /** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants * @{ */ - + /** @defgroup UARTEx_Word_Length UARTEx Word Length * @{ */ @@ -94,14 +95,9 @@ #define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) #define UART_WORDLENGTH_8B ((uint32_t)0x00000000) #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) -#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \ - ((LENGTH) == UART_WORDLENGTH_8B) || \ - ((LENGTH) == UART_WORDLENGTH_9B)) #else #define UART_WORDLENGTH_8B ((uint32_t)0x00000000) #define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ - ((LENGTH) == UART_WORDLENGTH_9B)) #endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ @@ -115,35 +111,26 @@ #if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /*!< Auto Baud rate detection on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /*!< Auto Baud rate detection on 0x55 frame detection */ #else -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE)) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ #endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ /** * @} */ - #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) /** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode * @{ */ -#define UART_LIN_DISABLE ((uint32_t)0x00000000) -#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) -#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \ - ((LIN) == UART_LIN_ENABLE)) +#define UART_LIN_DISABLE ((uint32_t)0x00000000) /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /*!< Local Interconnect Network enable */ /** * @} */ @@ -151,10 +138,8 @@ /** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection * @{ */ -#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) -#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) -#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) +#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /*!< LIN 11-bit break detection length */ /** * @} */ @@ -165,7 +150,9 @@ * - 0xXXXX : Flag mask in the ISR register * @{ */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_FLAG_REACK ((uint32_t)0x00400000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ #define UART_FLAG_TEACK ((uint32_t)0x00200000) #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_FLAG_WUF ((uint32_t)0x00100000) @@ -176,9 +163,9 @@ #define UART_FLAG_BUSY ((uint32_t)0x00010000) #define UART_FLAG_ABRF ((uint32_t)0x00008000) #define UART_FLAG_ABRE ((uint32_t)0x00004000) -#if !defined(STM32F030x6) && !defined(STM32F030x8) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_FLAG_EOBF ((uint32_t)0x00001000) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ #define UART_FLAG_RTOF ((uint32_t)0x00000800) #define UART_FLAG_CTS ((uint32_t)0x00000400) #define UART_FLAG_CTSIF ((uint32_t)0x00000200) @@ -239,7 +226,9 @@ #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ #define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ #define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ #define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ @@ -255,68 +244,79 @@ #define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */ #define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */ #define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) #define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \ - ((PARAM) == UART_SENDBREAK_REQUEST) || \ - ((PARAM) == UART_MUTE_MODE_REQUEST) || \ - ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \ - ((PARAM) == UART_TXDATA_FLUSH_REQUEST)) #else -#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \ - ((PARAM) == UART_SENDBREAK_REQUEST) || \ - ((PARAM) == UART_MUTE_MODE_REQUEST) || \ - ((PARAM) == UART_RXDATA_FLUSH_REQUEST)) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ /** * @} */ - + #if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) /** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable * @{ */ -#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) -#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) -#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ - ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE)) +#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /*!< UART stop mode enable */ /** * @} */ - + /** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection * @{ */ -#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000) -#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) -#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) -#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \ - ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \ - ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY)) +#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /*!< UART wake-up on receive data register not empty */ /** * @} - */ + */ #endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - + /** * @} - */ - -/* Exported macro ------------------------------------------------------------*/ + */ +/* Exported macros ------------------------------------------------------------*/ /** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros * @{ */ -/** @brief Reports the UART clock source. - * @param __HANDLE__: specifies the UART Handle - * @param __CLOCKSOURCE__ : output variable +/** @brief Flush the UART Data registers. + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0) +#else +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + } while(0) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__: specifies the UART Handle. + * @param __CLOCKSOURCE__: output variable. * @retval UART clocking source, written in __CLOCKSOURCE__. */ #if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ switch(__HAL_RCC_GET_USART1_SOURCE()) \ { \ @@ -340,7 +340,7 @@ #elif defined (STM32F030x8) || defined (STM32F070x6) || \ defined (STM32F042x6) || defined (STM32F048xx) || \ defined (STM32F051x8) || defined (STM32F058xx) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ @@ -373,7 +373,7 @@ } \ } while(0) #elif defined(STM32F070xB) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ @@ -414,7 +414,7 @@ } \ } while(0) #elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ @@ -472,7 +472,7 @@ } \ } while(0) #elif defined(STM32F091xC) || defined (STM32F098xx) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ @@ -563,7 +563,7 @@ } \ } while(0) #elif defined(STM32F030xC) -#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ do { \ if((__HANDLE__)->Instance == USART1) \ { \ @@ -615,19 +615,19 @@ #endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ -/** @brief Computes the UART mask to apply to retrieve the received data +/** @brief Compute the UART mask to apply to retrieve the received data * according to the word length and to the parity bits activation. - * If PCE = 1, the parity bit is not included in the data extracted + * @note If PCE = 1, the parity bit is not included in the data extracted * by the reception API(). * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__: specifies the UART Handle - * @retval none - */ + * DMA transfers. + * @param __HANDLE__: specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ #if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \ +#define UART_MASK_COMPUTATION(__HANDLE__) \ do { \ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ { \ @@ -662,9 +662,9 @@ (__HANDLE__)->Mask = 0x003F ; \ } \ } \ -} while(0) +} while(0) #else -#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \ +#define UART_MASK_COMPUTATION(__HANDLE__) \ do { \ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ { \ @@ -692,6 +692,100 @@ #endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__: UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#else +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__: UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) +#else +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__: UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__: UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__: UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) +#else +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__: UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__: UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + /** * @} */ @@ -706,8 +800,8 @@ * @{ */ /* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime); #if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime); HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); #endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ /** @@ -718,12 +812,10 @@ * @brief Extended UART Interrupt handling function * @{ */ - + /* IO operation functions ***************************************************/ -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); - #if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) -void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); #endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ /** * @} @@ -749,16 +841,17 @@ /** * @} - */ + */ +/* Private functions ---------------------------------------------------------*/ /** * @} - */ + */ /** * @} - */ + */ #ifdef __cplusplus }