Elijah Orr
/
mbed-renbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F446RE/stm32f4xx_hal_conf.h@106:ba1f97679dad, 2015-09-02 (annotated)
- Committer:
- Kojto
- Date:
- Wed Sep 02 14:17:43 2015 +0100
- Revision:
- 106:ba1f97679dad
- Child:
- 110:165afa46840b
Release 106 of the mbed library
Changes:
- new platform - Nucleo F446RE
- STM32F4 Cube driver update v2.3.2
- ST cmsis driver v2.3.2
- nordic bugfix gcc linker start address
- lpc11u68 - bugfix for serial ports
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Kojto | 106:ba1f97679dad | 1 | /** |
| Kojto | 106:ba1f97679dad | 2 | ****************************************************************************** |
| Kojto | 106:ba1f97679dad | 3 | * @file stm32f4xx_hal_conf.h |
| Kojto | 106:ba1f97679dad | 4 | * @author MCD Application Team |
| Kojto | 106:ba1f97679dad | 5 | * @version V1.3.2 |
| Kojto | 106:ba1f97679dad | 6 | * @date 26-June-2015 |
| Kojto | 106:ba1f97679dad | 7 | * @brief HAL configuration template file. |
| Kojto | 106:ba1f97679dad | 8 | * This file should be copied to the application folder and renamed |
| Kojto | 106:ba1f97679dad | 9 | * to stm32f4xx_hal_conf.h. |
| Kojto | 106:ba1f97679dad | 10 | ****************************************************************************** |
| Kojto | 106:ba1f97679dad | 11 | * @attention |
| Kojto | 106:ba1f97679dad | 12 | * |
| Kojto | 106:ba1f97679dad | 13 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
| Kojto | 106:ba1f97679dad | 14 | * |
| Kojto | 106:ba1f97679dad | 15 | * Redistribution and use in source and binary forms, with or without modification, |
| Kojto | 106:ba1f97679dad | 16 | * are permitted provided that the following conditions are met: |
| Kojto | 106:ba1f97679dad | 17 | * 1. Redistributions of source code must retain the above copyright notice, |
| Kojto | 106:ba1f97679dad | 18 | * this list of conditions and the following disclaimer. |
| Kojto | 106:ba1f97679dad | 19 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| Kojto | 106:ba1f97679dad | 20 | * this list of conditions and the following disclaimer in the documentation |
| Kojto | 106:ba1f97679dad | 21 | * and/or other materials provided with the distribution. |
| Kojto | 106:ba1f97679dad | 22 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| Kojto | 106:ba1f97679dad | 23 | * may be used to endorse or promote products derived from this software |
| Kojto | 106:ba1f97679dad | 24 | * without specific prior written permission. |
| Kojto | 106:ba1f97679dad | 25 | * |
| Kojto | 106:ba1f97679dad | 26 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| Kojto | 106:ba1f97679dad | 27 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| Kojto | 106:ba1f97679dad | 28 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| Kojto | 106:ba1f97679dad | 29 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| Kojto | 106:ba1f97679dad | 30 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| Kojto | 106:ba1f97679dad | 31 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| Kojto | 106:ba1f97679dad | 32 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| Kojto | 106:ba1f97679dad | 33 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| Kojto | 106:ba1f97679dad | 34 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| Kojto | 106:ba1f97679dad | 35 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| Kojto | 106:ba1f97679dad | 36 | * |
| Kojto | 106:ba1f97679dad | 37 | ****************************************************************************** |
| Kojto | 106:ba1f97679dad | 38 | */ |
| Kojto | 106:ba1f97679dad | 39 | |
| Kojto | 106:ba1f97679dad | 40 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| Kojto | 106:ba1f97679dad | 41 | #ifndef __STM32F4xx_HAL_CONF_H |
| Kojto | 106:ba1f97679dad | 42 | #define __STM32F4xx_HAL_CONF_H |
| Kojto | 106:ba1f97679dad | 43 | |
| Kojto | 106:ba1f97679dad | 44 | #ifdef __cplusplus |
| Kojto | 106:ba1f97679dad | 45 | extern "C" { |
| Kojto | 106:ba1f97679dad | 46 | #endif |
| Kojto | 106:ba1f97679dad | 47 | |
| Kojto | 106:ba1f97679dad | 48 | /* Exported types ------------------------------------------------------------*/ |
| Kojto | 106:ba1f97679dad | 49 | /* Exported constants --------------------------------------------------------*/ |
| Kojto | 106:ba1f97679dad | 50 | |
| Kojto | 106:ba1f97679dad | 51 | /* ########################## Module Selection ############################## */ |
| Kojto | 106:ba1f97679dad | 52 | /** |
| Kojto | 106:ba1f97679dad | 53 | * @brief This is the list of modules to be used in the HAL driver |
| Kojto | 106:ba1f97679dad | 54 | */ |
| Kojto | 106:ba1f97679dad | 55 | #define HAL_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 56 | #define HAL_ADC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 57 | #define HAL_CAN_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 58 | #define HAL_CRC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 59 | #define HAL_CEC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 60 | #define HAL_CRYP_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 61 | #define HAL_DAC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 62 | #define HAL_DCMI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 63 | #define HAL_DMA_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 64 | #define HAL_DMA2D_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 65 | #define HAL_ETH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 66 | #define HAL_FLASH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 67 | #define HAL_NAND_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 68 | #define HAL_NOR_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 69 | #define HAL_PCCARD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 70 | #define HAL_SRAM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 71 | #define HAL_SDRAM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 72 | #define HAL_HASH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 73 | #define HAL_GPIO_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 74 | #define HAL_I2C_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 75 | #define HAL_I2S_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 76 | #define HAL_IWDG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 77 | #define HAL_LTDC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 78 | #define HAL_PWR_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 79 | #define HAL_QSPI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 80 | #define HAL_RCC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 81 | #define HAL_RNG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 82 | #define HAL_RTC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 83 | #define HAL_SAI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 84 | #define HAL_SD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 85 | #define HAL_SPI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 86 | #define HAL_TIM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 87 | #define HAL_UART_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 88 | #define HAL_USART_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 89 | #define HAL_IRDA_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 90 | #define HAL_SMARTCARD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 91 | #define HAL_WWDG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 92 | #define HAL_CORTEX_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 93 | #define HAL_PCD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 94 | #define HAL_HCD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 95 | #define HAL_FMPI2C_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 96 | #define HAL_SPDIFRX_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 97 | |
| Kojto | 106:ba1f97679dad | 98 | |
| Kojto | 106:ba1f97679dad | 99 | /* ########################## HSE/HSI Values adaptation ##################### */ |
| Kojto | 106:ba1f97679dad | 100 | /** |
| Kojto | 106:ba1f97679dad | 101 | * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
| Kojto | 106:ba1f97679dad | 102 | * This value is used by the RCC HAL module to compute the system frequency |
| Kojto | 106:ba1f97679dad | 103 | * (when HSE is used as system clock source, directly or through the PLL). |
| Kojto | 106:ba1f97679dad | 104 | */ |
| Kojto | 106:ba1f97679dad | 105 | #if !defined (HSE_VALUE) |
| Kojto | 106:ba1f97679dad | 106 | #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ |
| Kojto | 106:ba1f97679dad | 107 | #endif /* HSE_VALUE */ |
| Kojto | 106:ba1f97679dad | 108 | |
| Kojto | 106:ba1f97679dad | 109 | #if !defined (HSE_STARTUP_TIMEOUT) |
| Kojto | 106:ba1f97679dad | 110 | #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ |
| Kojto | 106:ba1f97679dad | 111 | #endif /* HSE_STARTUP_TIMEOUT */ |
| Kojto | 106:ba1f97679dad | 112 | |
| Kojto | 106:ba1f97679dad | 113 | /** |
| Kojto | 106:ba1f97679dad | 114 | * @brief Internal High Speed oscillator (HSI) value. |
| Kojto | 106:ba1f97679dad | 115 | * This value is used by the RCC HAL module to compute the system frequency |
| Kojto | 106:ba1f97679dad | 116 | * (when HSI is used as system clock source, directly or through the PLL). |
| Kojto | 106:ba1f97679dad | 117 | */ |
| Kojto | 106:ba1f97679dad | 118 | #if !defined (HSI_VALUE) |
| Kojto | 106:ba1f97679dad | 119 | #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ |
| Kojto | 106:ba1f97679dad | 120 | #endif /* HSI_VALUE */ |
| Kojto | 106:ba1f97679dad | 121 | |
| Kojto | 106:ba1f97679dad | 122 | /** |
| Kojto | 106:ba1f97679dad | 123 | * @brief Internal Low Speed oscillator (LSI) value. |
| Kojto | 106:ba1f97679dad | 124 | */ |
| Kojto | 106:ba1f97679dad | 125 | #if !defined (LSI_VALUE) |
| Kojto | 106:ba1f97679dad | 126 | #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ |
| Kojto | 106:ba1f97679dad | 127 | #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
| Kojto | 106:ba1f97679dad | 128 | The real value may vary depending on the variations |
| Kojto | 106:ba1f97679dad | 129 | in voltage and temperature.*/ |
| Kojto | 106:ba1f97679dad | 130 | /** |
| Kojto | 106:ba1f97679dad | 131 | * @brief External Low Speed oscillator (LSE) value. |
| Kojto | 106:ba1f97679dad | 132 | */ |
| Kojto | 106:ba1f97679dad | 133 | #if !defined (LSE_VALUE) |
| Kojto | 106:ba1f97679dad | 134 | #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ |
| Kojto | 106:ba1f97679dad | 135 | #endif /* LSE_VALUE */ |
| Kojto | 106:ba1f97679dad | 136 | |
| Kojto | 106:ba1f97679dad | 137 | /** |
| Kojto | 106:ba1f97679dad | 138 | * @brief External clock source for I2S peripheral |
| Kojto | 106:ba1f97679dad | 139 | * This value is used by the I2S HAL module to compute the I2S clock source |
| Kojto | 106:ba1f97679dad | 140 | * frequency, this source is inserted directly through I2S_CKIN pad. |
| Kojto | 106:ba1f97679dad | 141 | */ |
| Kojto | 106:ba1f97679dad | 142 | #if !defined (EXTERNAL_CLOCK_VALUE) |
| Kojto | 106:ba1f97679dad | 143 | #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ |
| Kojto | 106:ba1f97679dad | 144 | #endif /* EXTERNAL_CLOCK_VALUE */ |
| Kojto | 106:ba1f97679dad | 145 | |
| Kojto | 106:ba1f97679dad | 146 | /* Tip: To avoid modifying this file each time you need to use different HSE, |
| Kojto | 106:ba1f97679dad | 147 | === you can define the HSE value in your toolchain compiler preprocessor. */ |
| Kojto | 106:ba1f97679dad | 148 | |
| Kojto | 106:ba1f97679dad | 149 | /* ########################### System Configuration ######################### */ |
| Kojto | 106:ba1f97679dad | 150 | /** |
| Kojto | 106:ba1f97679dad | 151 | * @brief This is the HAL system configuration section |
| Kojto | 106:ba1f97679dad | 152 | */ |
| Kojto | 106:ba1f97679dad | 153 | #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ |
| Kojto | 106:ba1f97679dad | 154 | #define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ |
| Kojto | 106:ba1f97679dad | 155 | #define USE_RTOS 0 |
| Kojto | 106:ba1f97679dad | 156 | #define PREFETCH_ENABLE 1 |
| Kojto | 106:ba1f97679dad | 157 | #define INSTRUCTION_CACHE_ENABLE 1 |
| Kojto | 106:ba1f97679dad | 158 | #define DATA_CACHE_ENABLE 1 |
| Kojto | 106:ba1f97679dad | 159 | |
| Kojto | 106:ba1f97679dad | 160 | /* ########################## Assert Selection ############################## */ |
| Kojto | 106:ba1f97679dad | 161 | /** |
| Kojto | 106:ba1f97679dad | 162 | * @brief Uncomment the line below to expanse the "assert_param" macro in the |
| Kojto | 106:ba1f97679dad | 163 | * HAL drivers code |
| Kojto | 106:ba1f97679dad | 164 | */ |
| Kojto | 106:ba1f97679dad | 165 | /* #define USE_FULL_ASSERT 1 */ |
| Kojto | 106:ba1f97679dad | 166 | |
| Kojto | 106:ba1f97679dad | 167 | /* ################## Ethernet peripheral configuration ##################### */ |
| Kojto | 106:ba1f97679dad | 168 | |
| Kojto | 106:ba1f97679dad | 169 | /* Section 1 : Ethernet peripheral configuration */ |
| Kojto | 106:ba1f97679dad | 170 | |
| Kojto | 106:ba1f97679dad | 171 | /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ |
| Kojto | 106:ba1f97679dad | 172 | #define MAC_ADDR0 2 |
| Kojto | 106:ba1f97679dad | 173 | #define MAC_ADDR1 0 |
| Kojto | 106:ba1f97679dad | 174 | #define MAC_ADDR2 0 |
| Kojto | 106:ba1f97679dad | 175 | #define MAC_ADDR3 0 |
| Kojto | 106:ba1f97679dad | 176 | #define MAC_ADDR4 0 |
| Kojto | 106:ba1f97679dad | 177 | #define MAC_ADDR5 0 |
| Kojto | 106:ba1f97679dad | 178 | |
| Kojto | 106:ba1f97679dad | 179 | /* Definition of the Ethernet driver buffers size and count */ |
| Kojto | 106:ba1f97679dad | 180 | #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
| Kojto | 106:ba1f97679dad | 181 | #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
| Kojto | 106:ba1f97679dad | 182 | #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
| Kojto | 106:ba1f97679dad | 183 | #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
| Kojto | 106:ba1f97679dad | 184 | |
| Kojto | 106:ba1f97679dad | 185 | /* Section 2: PHY configuration section */ |
| Kojto | 106:ba1f97679dad | 186 | |
| Kojto | 106:ba1f97679dad | 187 | /* DP83848 PHY Address*/ |
| Kojto | 106:ba1f97679dad | 188 | #define DP83848_PHY_ADDRESS 0x01 |
| Kojto | 106:ba1f97679dad | 189 | /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
| Kojto | 106:ba1f97679dad | 190 | #define PHY_RESET_DELAY ((uint32_t)0x000000FF) |
| Kojto | 106:ba1f97679dad | 191 | /* PHY Configuration delay */ |
| Kojto | 106:ba1f97679dad | 192 | #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) |
| Kojto | 106:ba1f97679dad | 193 | |
| Kojto | 106:ba1f97679dad | 194 | #define PHY_READ_TO ((uint32_t)0x0000FFFF) |
| Kojto | 106:ba1f97679dad | 195 | #define PHY_WRITE_TO ((uint32_t)0x0000FFFF) |
| Kojto | 106:ba1f97679dad | 196 | |
| Kojto | 106:ba1f97679dad | 197 | /* Section 3: Common PHY Registers */ |
| Kojto | 106:ba1f97679dad | 198 | |
| Kojto | 106:ba1f97679dad | 199 | #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ |
| Kojto | 106:ba1f97679dad | 200 | #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ |
| Kojto | 106:ba1f97679dad | 201 | |
| Kojto | 106:ba1f97679dad | 202 | #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ |
| Kojto | 106:ba1f97679dad | 203 | #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ |
| Kojto | 106:ba1f97679dad | 204 | #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ |
| Kojto | 106:ba1f97679dad | 205 | #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ |
| Kojto | 106:ba1f97679dad | 206 | #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ |
| Kojto | 106:ba1f97679dad | 207 | #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ |
| Kojto | 106:ba1f97679dad | 208 | #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ |
| Kojto | 106:ba1f97679dad | 209 | #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ |
| Kojto | 106:ba1f97679dad | 210 | #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ |
| Kojto | 106:ba1f97679dad | 211 | #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ |
| Kojto | 106:ba1f97679dad | 212 | |
| Kojto | 106:ba1f97679dad | 213 | #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ |
| Kojto | 106:ba1f97679dad | 214 | #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ |
| Kojto | 106:ba1f97679dad | 215 | #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ |
| Kojto | 106:ba1f97679dad | 216 | |
| Kojto | 106:ba1f97679dad | 217 | /* Section 4: Extended PHY Registers */ |
| Kojto | 106:ba1f97679dad | 218 | |
| Kojto | 106:ba1f97679dad | 219 | #define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ |
| Kojto | 106:ba1f97679dad | 220 | #define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ |
| Kojto | 106:ba1f97679dad | 221 | #define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ |
| Kojto | 106:ba1f97679dad | 222 | |
| Kojto | 106:ba1f97679dad | 223 | #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ |
| Kojto | 106:ba1f97679dad | 224 | #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ |
| Kojto | 106:ba1f97679dad | 225 | #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ |
| Kojto | 106:ba1f97679dad | 226 | |
| Kojto | 106:ba1f97679dad | 227 | #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ |
| Kojto | 106:ba1f97679dad | 228 | #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ |
| Kojto | 106:ba1f97679dad | 229 | |
| Kojto | 106:ba1f97679dad | 230 | #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ |
| Kojto | 106:ba1f97679dad | 231 | #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ |
| Kojto | 106:ba1f97679dad | 232 | |
| Kojto | 106:ba1f97679dad | 233 | /* Includes ------------------------------------------------------------------*/ |
| Kojto | 106:ba1f97679dad | 234 | /** |
| Kojto | 106:ba1f97679dad | 235 | * @brief Include module's header file |
| Kojto | 106:ba1f97679dad | 236 | */ |
| Kojto | 106:ba1f97679dad | 237 | |
| Kojto | 106:ba1f97679dad | 238 | #ifdef HAL_RCC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 239 | #include "stm32f4xx_hal_rcc.h" |
| Kojto | 106:ba1f97679dad | 240 | #endif /* HAL_RCC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 241 | |
| Kojto | 106:ba1f97679dad | 242 | #ifdef HAL_GPIO_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 243 | #include "stm32f4xx_hal_gpio.h" |
| Kojto | 106:ba1f97679dad | 244 | #endif /* HAL_GPIO_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 245 | |
| Kojto | 106:ba1f97679dad | 246 | #ifdef HAL_DMA_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 247 | #include "stm32f4xx_hal_dma.h" |
| Kojto | 106:ba1f97679dad | 248 | #endif /* HAL_DMA_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 249 | |
| Kojto | 106:ba1f97679dad | 250 | #ifdef HAL_CORTEX_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 251 | #include "stm32f4xx_hal_cortex.h" |
| Kojto | 106:ba1f97679dad | 252 | #endif /* HAL_CORTEX_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 253 | |
| Kojto | 106:ba1f97679dad | 254 | #ifdef HAL_ADC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 255 | #include "stm32f4xx_hal_adc.h" |
| Kojto | 106:ba1f97679dad | 256 | #endif /* HAL_ADC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 257 | |
| Kojto | 106:ba1f97679dad | 258 | #ifdef HAL_CAN_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 259 | #include "stm32f4xx_hal_can.h" |
| Kojto | 106:ba1f97679dad | 260 | #endif /* HAL_CAN_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 261 | |
| Kojto | 106:ba1f97679dad | 262 | #ifdef HAL_CRC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 263 | #include "stm32f4xx_hal_crc.h" |
| Kojto | 106:ba1f97679dad | 264 | #endif /* HAL_CRC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 265 | |
| Kojto | 106:ba1f97679dad | 266 | #ifdef HAL_CRYP_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 267 | #include "stm32f4xx_hal_cryp.h" |
| Kojto | 106:ba1f97679dad | 268 | #endif /* HAL_CRYP_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 269 | |
| Kojto | 106:ba1f97679dad | 270 | #ifdef HAL_DMA2D_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 271 | #include "stm32f4xx_hal_dma2d.h" |
| Kojto | 106:ba1f97679dad | 272 | #endif /* HAL_DMA2D_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 273 | |
| Kojto | 106:ba1f97679dad | 274 | #ifdef HAL_DAC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 275 | #include "stm32f4xx_hal_dac.h" |
| Kojto | 106:ba1f97679dad | 276 | #endif /* HAL_DAC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 277 | |
| Kojto | 106:ba1f97679dad | 278 | #ifdef HAL_DCMI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 279 | #include "stm32f4xx_hal_dcmi.h" |
| Kojto | 106:ba1f97679dad | 280 | #endif /* HAL_DCMI_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 281 | |
| Kojto | 106:ba1f97679dad | 282 | #ifdef HAL_ETH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 283 | #include "stm32f4xx_hal_eth.h" |
| Kojto | 106:ba1f97679dad | 284 | #endif /* HAL_ETH_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 285 | |
| Kojto | 106:ba1f97679dad | 286 | #ifdef HAL_FLASH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 287 | #include "stm32f4xx_hal_flash.h" |
| Kojto | 106:ba1f97679dad | 288 | #endif /* HAL_FLASH_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 289 | |
| Kojto | 106:ba1f97679dad | 290 | #ifdef HAL_SRAM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 291 | #include "stm32f4xx_hal_sram.h" |
| Kojto | 106:ba1f97679dad | 292 | #endif /* HAL_SRAM_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 293 | |
| Kojto | 106:ba1f97679dad | 294 | #ifdef HAL_NOR_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 295 | #include "stm32f4xx_hal_nor.h" |
| Kojto | 106:ba1f97679dad | 296 | #endif /* HAL_NOR_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 297 | |
| Kojto | 106:ba1f97679dad | 298 | #ifdef HAL_NAND_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 299 | #include "stm32f4xx_hal_nand.h" |
| Kojto | 106:ba1f97679dad | 300 | #endif /* HAL_NAND_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 301 | |
| Kojto | 106:ba1f97679dad | 302 | #ifdef HAL_PCCARD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 303 | #include "stm32f4xx_hal_pccard.h" |
| Kojto | 106:ba1f97679dad | 304 | #endif /* HAL_PCCARD_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 305 | |
| Kojto | 106:ba1f97679dad | 306 | #ifdef HAL_SDRAM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 307 | #include "stm32f4xx_hal_sdram.h" |
| Kojto | 106:ba1f97679dad | 308 | #endif /* HAL_SDRAM_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 309 | |
| Kojto | 106:ba1f97679dad | 310 | #ifdef HAL_HASH_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 311 | #include "stm32f4xx_hal_hash.h" |
| Kojto | 106:ba1f97679dad | 312 | #endif /* HAL_HASH_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 313 | |
| Kojto | 106:ba1f97679dad | 314 | #ifdef HAL_I2C_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 315 | #include "stm32f4xx_hal_i2c.h" |
| Kojto | 106:ba1f97679dad | 316 | #endif /* HAL_I2C_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 317 | |
| Kojto | 106:ba1f97679dad | 318 | #ifdef HAL_I2S_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 319 | #include "stm32f4xx_hal_i2s.h" |
| Kojto | 106:ba1f97679dad | 320 | #endif /* HAL_I2S_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 321 | |
| Kojto | 106:ba1f97679dad | 322 | #ifdef HAL_IWDG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 323 | #include "stm32f4xx_hal_iwdg.h" |
| Kojto | 106:ba1f97679dad | 324 | #endif /* HAL_IWDG_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 325 | |
| Kojto | 106:ba1f97679dad | 326 | #ifdef HAL_LTDC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 327 | #include "stm32f4xx_hal_ltdc.h" |
| Kojto | 106:ba1f97679dad | 328 | #endif /* HAL_LTDC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 329 | |
| Kojto | 106:ba1f97679dad | 330 | #ifdef HAL_PWR_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 331 | #include "stm32f4xx_hal_pwr.h" |
| Kojto | 106:ba1f97679dad | 332 | #endif /* HAL_PWR_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 333 | |
| Kojto | 106:ba1f97679dad | 334 | #ifdef HAL_RNG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 335 | #include "stm32f4xx_hal_rng.h" |
| Kojto | 106:ba1f97679dad | 336 | #endif /* HAL_RNG_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 337 | |
| Kojto | 106:ba1f97679dad | 338 | #ifdef HAL_RTC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 339 | #include "stm32f4xx_hal_rtc.h" |
| Kojto | 106:ba1f97679dad | 340 | #endif /* HAL_RTC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 341 | |
| Kojto | 106:ba1f97679dad | 342 | #ifdef HAL_SAI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 343 | #include "stm32f4xx_hal_sai.h" |
| Kojto | 106:ba1f97679dad | 344 | #endif /* HAL_SAI_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 345 | |
| Kojto | 106:ba1f97679dad | 346 | #ifdef HAL_SD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 347 | #include "stm32f4xx_hal_sd.h" |
| Kojto | 106:ba1f97679dad | 348 | #endif /* HAL_SD_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 349 | |
| Kojto | 106:ba1f97679dad | 350 | #ifdef HAL_SPI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 351 | #include "stm32f4xx_hal_spi.h" |
| Kojto | 106:ba1f97679dad | 352 | #endif /* HAL_SPI_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 353 | |
| Kojto | 106:ba1f97679dad | 354 | #ifdef HAL_TIM_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 355 | #include "stm32f4xx_hal_tim.h" |
| Kojto | 106:ba1f97679dad | 356 | #endif /* HAL_TIM_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 357 | |
| Kojto | 106:ba1f97679dad | 358 | #ifdef HAL_UART_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 359 | #include "stm32f4xx_hal_uart.h" |
| Kojto | 106:ba1f97679dad | 360 | #endif /* HAL_UART_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 361 | |
| Kojto | 106:ba1f97679dad | 362 | #ifdef HAL_USART_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 363 | #include "stm32f4xx_hal_usart.h" |
| Kojto | 106:ba1f97679dad | 364 | #endif /* HAL_USART_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 365 | |
| Kojto | 106:ba1f97679dad | 366 | #ifdef HAL_IRDA_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 367 | #include "stm32f4xx_hal_irda.h" |
| Kojto | 106:ba1f97679dad | 368 | #endif /* HAL_IRDA_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 369 | |
| Kojto | 106:ba1f97679dad | 370 | #ifdef HAL_SMARTCARD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 371 | #include "stm32f4xx_hal_smartcard.h" |
| Kojto | 106:ba1f97679dad | 372 | #endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 373 | |
| Kojto | 106:ba1f97679dad | 374 | #ifdef HAL_WWDG_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 375 | #include "stm32f4xx_hal_wwdg.h" |
| Kojto | 106:ba1f97679dad | 376 | #endif /* HAL_WWDG_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 377 | |
| Kojto | 106:ba1f97679dad | 378 | #ifdef HAL_PCD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 379 | #include "stm32f4xx_hal_pcd.h" |
| Kojto | 106:ba1f97679dad | 380 | #endif /* HAL_PCD_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 381 | |
| Kojto | 106:ba1f97679dad | 382 | #ifdef HAL_HCD_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 383 | #include "stm32f4xx_hal_hcd.h" |
| Kojto | 106:ba1f97679dad | 384 | #endif /* HAL_HCD_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 385 | |
| Kojto | 106:ba1f97679dad | 386 | #ifdef HAL_QSPI_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 387 | #include "stm32f4xx_hal_qspi.h" |
| Kojto | 106:ba1f97679dad | 388 | #endif /* HAL_QSPI_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 389 | |
| Kojto | 106:ba1f97679dad | 390 | #ifdef HAL_CEC_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 391 | #include "stm32f4xx_hal_cec.h" |
| Kojto | 106:ba1f97679dad | 392 | #endif /* HAL_CEC_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 393 | |
| Kojto | 106:ba1f97679dad | 394 | #ifdef HAL_FMPI2C_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 395 | #include "stm32f4xx_hal_fmpi2c.h" |
| Kojto | 106:ba1f97679dad | 396 | #endif /* HAL_FMPI2C_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 397 | |
| Kojto | 106:ba1f97679dad | 398 | #ifdef HAL_SPDIFRX_MODULE_ENABLED |
| Kojto | 106:ba1f97679dad | 399 | #include "stm32f4xx_hal_spdifrx.h" |
| Kojto | 106:ba1f97679dad | 400 | #endif /* HAL_SPDIFRX_MODULE_ENABLED */ |
| Kojto | 106:ba1f97679dad | 401 | |
| Kojto | 106:ba1f97679dad | 402 | /* Exported macro ------------------------------------------------------------*/ |
| Kojto | 106:ba1f97679dad | 403 | #ifdef USE_FULL_ASSERT |
| Kojto | 106:ba1f97679dad | 404 | /** |
| Kojto | 106:ba1f97679dad | 405 | * @brief The assert_param macro is used for function's parameters check. |
| Kojto | 106:ba1f97679dad | 406 | * @param expr: If expr is false, it calls assert_failed function |
| Kojto | 106:ba1f97679dad | 407 | * which reports the name of the source file and the source |
| Kojto | 106:ba1f97679dad | 408 | * line number of the call that failed. |
| Kojto | 106:ba1f97679dad | 409 | * If expr is true, it returns no value. |
| Kojto | 106:ba1f97679dad | 410 | * @retval None |
| Kojto | 106:ba1f97679dad | 411 | */ |
| Kojto | 106:ba1f97679dad | 412 | #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) |
| Kojto | 106:ba1f97679dad | 413 | /* Exported functions ------------------------------------------------------- */ |
| Kojto | 106:ba1f97679dad | 414 | void assert_failed(uint8_t* file, uint32_t line); |
| Kojto | 106:ba1f97679dad | 415 | #else |
| Kojto | 106:ba1f97679dad | 416 | #define assert_param(expr) ((void)0) |
| Kojto | 106:ba1f97679dad | 417 | #endif /* USE_FULL_ASSERT */ |
| Kojto | 106:ba1f97679dad | 418 | |
| Kojto | 106:ba1f97679dad | 419 | |
| Kojto | 106:ba1f97679dad | 420 | #ifdef __cplusplus |
| Kojto | 106:ba1f97679dad | 421 | } |
| Kojto | 106:ba1f97679dad | 422 | #endif |
| Kojto | 106:ba1f97679dad | 423 | |
| Kojto | 106:ba1f97679dad | 424 | #endif /* __STM32F4xx_HAL_CONF_H */ |
| Kojto | 106:ba1f97679dad | 425 | |
| Kojto | 106:ba1f97679dad | 426 | |
| Kojto | 106:ba1f97679dad | 427 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |