Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
TARGET_MOTE_L152RC/stm32l1xx_hal_sd.h@112:6f327212ef96, 2016-01-13 (annotated)
- Committer:
- Kojto
- Date:
- Wed Jan 13 09:48:29 2016 +0000
- Revision:
- 112:6f327212ef96
Release 112 of the mbed library
Changes:
- new platforms - STM32 B96B F446, MOTE_L152RC
- nrf51 - fix serial init bug (character sent)
- stm all devices - fix RTC clocking in the init
- stm f0 - SystemInit clock fix, for SetVector()
- RawSerial - fix for microlib (vsnprintf with size 0)
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Kojto | 112:6f327212ef96 | 1 | /** |
Kojto | 112:6f327212ef96 | 2 | ****************************************************************************** |
Kojto | 112:6f327212ef96 | 3 | * @file stm32l1xx_hal_sd.h |
Kojto | 112:6f327212ef96 | 4 | * @author MCD Application Team |
Kojto | 112:6f327212ef96 | 5 | * @version V1.0.0 |
Kojto | 112:6f327212ef96 | 6 | * @date 5-September-2014 |
Kojto | 112:6f327212ef96 | 7 | * @brief Header file of SD HAL module. |
Kojto | 112:6f327212ef96 | 8 | ****************************************************************************** |
Kojto | 112:6f327212ef96 | 9 | * @attention |
Kojto | 112:6f327212ef96 | 10 | * |
Kojto | 112:6f327212ef96 | 11 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
Kojto | 112:6f327212ef96 | 12 | * |
Kojto | 112:6f327212ef96 | 13 | * Redistribution and use in source and binary forms, with or without modification, |
Kojto | 112:6f327212ef96 | 14 | * are permitted provided that the following conditions are met: |
Kojto | 112:6f327212ef96 | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
Kojto | 112:6f327212ef96 | 16 | * this list of conditions and the following disclaimer. |
Kojto | 112:6f327212ef96 | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
Kojto | 112:6f327212ef96 | 18 | * this list of conditions and the following disclaimer in the documentation |
Kojto | 112:6f327212ef96 | 19 | * and/or other materials provided with the distribution. |
Kojto | 112:6f327212ef96 | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
Kojto | 112:6f327212ef96 | 21 | * may be used to endorse or promote products derived from this software |
Kojto | 112:6f327212ef96 | 22 | * without specific prior written permission. |
Kojto | 112:6f327212ef96 | 23 | * |
Kojto | 112:6f327212ef96 | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
Kojto | 112:6f327212ef96 | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
Kojto | 112:6f327212ef96 | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
Kojto | 112:6f327212ef96 | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
Kojto | 112:6f327212ef96 | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
Kojto | 112:6f327212ef96 | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
Kojto | 112:6f327212ef96 | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Kojto | 112:6f327212ef96 | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Kojto | 112:6f327212ef96 | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Kojto | 112:6f327212ef96 | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Kojto | 112:6f327212ef96 | 34 | * |
Kojto | 112:6f327212ef96 | 35 | ****************************************************************************** |
Kojto | 112:6f327212ef96 | 36 | */ |
Kojto | 112:6f327212ef96 | 37 | |
Kojto | 112:6f327212ef96 | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
Kojto | 112:6f327212ef96 | 39 | #ifndef __STM32L1xx_HAL_SD_H |
Kojto | 112:6f327212ef96 | 40 | #define __STM32L1xx_HAL_SD_H |
Kojto | 112:6f327212ef96 | 41 | |
Kojto | 112:6f327212ef96 | 42 | #if defined(STM32L151xD) || defined(STM32L152xD) || defined(STM32L162xD) |
Kojto | 112:6f327212ef96 | 43 | |
Kojto | 112:6f327212ef96 | 44 | #ifdef __cplusplus |
Kojto | 112:6f327212ef96 | 45 | extern "C" { |
Kojto | 112:6f327212ef96 | 46 | #endif |
Kojto | 112:6f327212ef96 | 47 | |
Kojto | 112:6f327212ef96 | 48 | /* Includes ------------------------------------------------------------------*/ |
Kojto | 112:6f327212ef96 | 49 | #include "stm32l1xx_ll_sdmmc.h" |
Kojto | 112:6f327212ef96 | 50 | |
Kojto | 112:6f327212ef96 | 51 | /** @addtogroup STM32L1xx_HAL_Driver |
Kojto | 112:6f327212ef96 | 52 | * @{ |
Kojto | 112:6f327212ef96 | 53 | */ |
Kojto | 112:6f327212ef96 | 54 | |
Kojto | 112:6f327212ef96 | 55 | /** @addtogroup SD |
Kojto | 112:6f327212ef96 | 56 | * @{ |
Kojto | 112:6f327212ef96 | 57 | */ |
Kojto | 112:6f327212ef96 | 58 | |
Kojto | 112:6f327212ef96 | 59 | /* Exported types ------------------------------------------------------------*/ |
Kojto | 112:6f327212ef96 | 60 | /** @defgroup SD_Exported_Types SD Exported Types |
Kojto | 112:6f327212ef96 | 61 | * @{ |
Kojto | 112:6f327212ef96 | 62 | */ |
Kojto | 112:6f327212ef96 | 63 | |
Kojto | 112:6f327212ef96 | 64 | #define SD_InitTypeDef SDIO_InitTypeDef |
Kojto | 112:6f327212ef96 | 65 | #define SD_TypeDef SDIO_TypeDef |
Kojto | 112:6f327212ef96 | 66 | |
Kojto | 112:6f327212ef96 | 67 | /** |
Kojto | 112:6f327212ef96 | 68 | * @brief SDIO Handle Structure definition |
Kojto | 112:6f327212ef96 | 69 | */ |
Kojto | 112:6f327212ef96 | 70 | typedef struct |
Kojto | 112:6f327212ef96 | 71 | { |
Kojto | 112:6f327212ef96 | 72 | SD_TypeDef *Instance; /*!< SDIO register base address */ |
Kojto | 112:6f327212ef96 | 73 | |
Kojto | 112:6f327212ef96 | 74 | SD_InitTypeDef Init; /*!< SD required parameters */ |
Kojto | 112:6f327212ef96 | 75 | |
Kojto | 112:6f327212ef96 | 76 | HAL_LockTypeDef Lock; /*!< SD locking object */ |
Kojto | 112:6f327212ef96 | 77 | |
Kojto | 112:6f327212ef96 | 78 | uint32_t CardType; /*!< SD card type */ |
Kojto | 112:6f327212ef96 | 79 | |
Kojto | 112:6f327212ef96 | 80 | uint32_t RCA; /*!< SD relative card address */ |
Kojto | 112:6f327212ef96 | 81 | |
Kojto | 112:6f327212ef96 | 82 | uint32_t CSD[4]; /*!< SD card specific data table */ |
Kojto | 112:6f327212ef96 | 83 | |
Kojto | 112:6f327212ef96 | 84 | uint32_t CID[4]; /*!< SD card identification number table */ |
Kojto | 112:6f327212ef96 | 85 | |
Kojto | 112:6f327212ef96 | 86 | __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */ |
Kojto | 112:6f327212ef96 | 87 | |
Kojto | 112:6f327212ef96 | 88 | __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */ |
Kojto | 112:6f327212ef96 | 89 | |
Kojto | 112:6f327212ef96 | 90 | __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */ |
Kojto | 112:6f327212ef96 | 91 | |
Kojto | 112:6f327212ef96 | 92 | __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */ |
Kojto | 112:6f327212ef96 | 93 | |
Kojto | 112:6f327212ef96 | 94 | DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ |
Kojto | 112:6f327212ef96 | 95 | |
Kojto | 112:6f327212ef96 | 96 | DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ |
Kojto | 112:6f327212ef96 | 97 | |
Kojto | 112:6f327212ef96 | 98 | }SD_HandleTypeDef; |
Kojto | 112:6f327212ef96 | 99 | |
Kojto | 112:6f327212ef96 | 100 | /** |
Kojto | 112:6f327212ef96 | 101 | * @brief Card Specific Data: CSD Register |
Kojto | 112:6f327212ef96 | 102 | */ |
Kojto | 112:6f327212ef96 | 103 | typedef struct |
Kojto | 112:6f327212ef96 | 104 | { |
Kojto | 112:6f327212ef96 | 105 | __IO uint8_t CSDStruct; /*!< CSD structure */ |
Kojto | 112:6f327212ef96 | 106 | __IO uint8_t SysSpecVersion; /*!< System specification version */ |
Kojto | 112:6f327212ef96 | 107 | __IO uint8_t Reserved1; /*!< Reserved */ |
Kojto | 112:6f327212ef96 | 108 | __IO uint8_t TAAC; /*!< Data read access time 1 */ |
Kojto | 112:6f327212ef96 | 109 | __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ |
Kojto | 112:6f327212ef96 | 110 | __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ |
Kojto | 112:6f327212ef96 | 111 | __IO uint16_t CardComdClasses; /*!< Card command classes */ |
Kojto | 112:6f327212ef96 | 112 | __IO uint8_t RdBlockLen; /*!< Max. read data block length */ |
Kojto | 112:6f327212ef96 | 113 | __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ |
Kojto | 112:6f327212ef96 | 114 | __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ |
Kojto | 112:6f327212ef96 | 115 | __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ |
Kojto | 112:6f327212ef96 | 116 | __IO uint8_t DSRImpl; /*!< DSR implemented */ |
Kojto | 112:6f327212ef96 | 117 | __IO uint8_t Reserved2; /*!< Reserved */ |
Kojto | 112:6f327212ef96 | 118 | __IO uint32_t DeviceSize; /*!< Device Size */ |
Kojto | 112:6f327212ef96 | 119 | __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ |
Kojto | 112:6f327212ef96 | 120 | __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ |
Kojto | 112:6f327212ef96 | 121 | __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ |
Kojto | 112:6f327212ef96 | 122 | __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ |
Kojto | 112:6f327212ef96 | 123 | __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ |
Kojto | 112:6f327212ef96 | 124 | __IO uint8_t EraseGrSize; /*!< Erase group size */ |
Kojto | 112:6f327212ef96 | 125 | __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ |
Kojto | 112:6f327212ef96 | 126 | __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ |
Kojto | 112:6f327212ef96 | 127 | __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ |
Kojto | 112:6f327212ef96 | 128 | __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ |
Kojto | 112:6f327212ef96 | 129 | __IO uint8_t WrSpeedFact; /*!< Write speed factor */ |
Kojto | 112:6f327212ef96 | 130 | __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ |
Kojto | 112:6f327212ef96 | 131 | __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ |
Kojto | 112:6f327212ef96 | 132 | __IO uint8_t Reserved3; /*!< Reserved */ |
Kojto | 112:6f327212ef96 | 133 | __IO uint8_t ContentProtectAppli; /*!< Content protection application */ |
Kojto | 112:6f327212ef96 | 134 | __IO uint8_t FileFormatGrouop; /*!< File format group */ |
Kojto | 112:6f327212ef96 | 135 | __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ |
Kojto | 112:6f327212ef96 | 136 | __IO uint8_t PermWrProtect; /*!< Permanent write protection */ |
Kojto | 112:6f327212ef96 | 137 | __IO uint8_t TempWrProtect; /*!< Temporary write protection */ |
Kojto | 112:6f327212ef96 | 138 | __IO uint8_t FileFormat; /*!< File format */ |
Kojto | 112:6f327212ef96 | 139 | __IO uint8_t ECC; /*!< ECC code */ |
Kojto | 112:6f327212ef96 | 140 | __IO uint8_t CSD_CRC; /*!< CSD CRC */ |
Kojto | 112:6f327212ef96 | 141 | __IO uint8_t Reserved4; /*!< Always 1 */ |
Kojto | 112:6f327212ef96 | 142 | |
Kojto | 112:6f327212ef96 | 143 | }HAL_SD_CSDTypedef; |
Kojto | 112:6f327212ef96 | 144 | |
Kojto | 112:6f327212ef96 | 145 | /** |
Kojto | 112:6f327212ef96 | 146 | * @brief Card Identification Data: CID Register |
Kojto | 112:6f327212ef96 | 147 | */ |
Kojto | 112:6f327212ef96 | 148 | typedef struct |
Kojto | 112:6f327212ef96 | 149 | { |
Kojto | 112:6f327212ef96 | 150 | __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ |
Kojto | 112:6f327212ef96 | 151 | __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ |
Kojto | 112:6f327212ef96 | 152 | __IO uint32_t ProdName1; /*!< Product Name part1 */ |
Kojto | 112:6f327212ef96 | 153 | __IO uint8_t ProdName2; /*!< Product Name part2 */ |
Kojto | 112:6f327212ef96 | 154 | __IO uint8_t ProdRev; /*!< Product Revision */ |
Kojto | 112:6f327212ef96 | 155 | __IO uint32_t ProdSN; /*!< Product Serial Number */ |
Kojto | 112:6f327212ef96 | 156 | __IO uint8_t Reserved1; /*!< Reserved1 */ |
Kojto | 112:6f327212ef96 | 157 | __IO uint16_t ManufactDate; /*!< Manufacturing Date */ |
Kojto | 112:6f327212ef96 | 158 | __IO uint8_t CID_CRC; /*!< CID CRC */ |
Kojto | 112:6f327212ef96 | 159 | __IO uint8_t Reserved2; /*!< Always 1 */ |
Kojto | 112:6f327212ef96 | 160 | |
Kojto | 112:6f327212ef96 | 161 | }HAL_SD_CIDTypedef; |
Kojto | 112:6f327212ef96 | 162 | |
Kojto | 112:6f327212ef96 | 163 | /** |
Kojto | 112:6f327212ef96 | 164 | * @brief SD Card Status returned by ACMD13 |
Kojto | 112:6f327212ef96 | 165 | */ |
Kojto | 112:6f327212ef96 | 166 | typedef struct |
Kojto | 112:6f327212ef96 | 167 | { |
Kojto | 112:6f327212ef96 | 168 | __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */ |
Kojto | 112:6f327212ef96 | 169 | __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */ |
Kojto | 112:6f327212ef96 | 170 | __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */ |
Kojto | 112:6f327212ef96 | 171 | __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */ |
Kojto | 112:6f327212ef96 | 172 | __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */ |
Kojto | 112:6f327212ef96 | 173 | __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */ |
Kojto | 112:6f327212ef96 | 174 | __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */ |
Kojto | 112:6f327212ef96 | 175 | __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */ |
Kojto | 112:6f327212ef96 | 176 | __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */ |
Kojto | 112:6f327212ef96 | 177 | __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */ |
Kojto | 112:6f327212ef96 | 178 | |
Kojto | 112:6f327212ef96 | 179 | }HAL_SD_CardStatusTypedef; |
Kojto | 112:6f327212ef96 | 180 | |
Kojto | 112:6f327212ef96 | 181 | /** |
Kojto | 112:6f327212ef96 | 182 | * @brief SD Card information structure |
Kojto | 112:6f327212ef96 | 183 | */ |
Kojto | 112:6f327212ef96 | 184 | typedef struct |
Kojto | 112:6f327212ef96 | 185 | { |
Kojto | 112:6f327212ef96 | 186 | HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */ |
Kojto | 112:6f327212ef96 | 187 | HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */ |
Kojto | 112:6f327212ef96 | 188 | uint64_t CardCapacity; /*!< Card capacity */ |
Kojto | 112:6f327212ef96 | 189 | uint32_t CardBlockSize; /*!< Card block size */ |
Kojto | 112:6f327212ef96 | 190 | uint16_t RCA; /*!< SD relative card address */ |
Kojto | 112:6f327212ef96 | 191 | uint8_t CardType; /*!< SD card type */ |
Kojto | 112:6f327212ef96 | 192 | |
Kojto | 112:6f327212ef96 | 193 | }HAL_SD_CardInfoTypedef; |
Kojto | 112:6f327212ef96 | 194 | |
Kojto | 112:6f327212ef96 | 195 | /** |
Kojto | 112:6f327212ef96 | 196 | * @brief SD Error status enumeration Structure definition |
Kojto | 112:6f327212ef96 | 197 | */ |
Kojto | 112:6f327212ef96 | 198 | typedef enum |
Kojto | 112:6f327212ef96 | 199 | { |
Kojto | 112:6f327212ef96 | 200 | /** |
Kojto | 112:6f327212ef96 | 201 | * @brief SD specific error defines |
Kojto | 112:6f327212ef96 | 202 | */ |
Kojto | 112:6f327212ef96 | 203 | SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ |
Kojto | 112:6f327212ef96 | 204 | SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */ |
Kojto | 112:6f327212ef96 | 205 | SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ |
Kojto | 112:6f327212ef96 | 206 | SD_DATA_TIMEOUT = (4), /*!< Data timeout */ |
Kojto | 112:6f327212ef96 | 207 | SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */ |
Kojto | 112:6f327212ef96 | 208 | SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */ |
Kojto | 112:6f327212ef96 | 209 | SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */ |
Kojto | 112:6f327212ef96 | 210 | SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */ |
Kojto | 112:6f327212ef96 | 211 | SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ |
Kojto | 112:6f327212ef96 | 212 | SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ |
Kojto | 112:6f327212ef96 | 213 | SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */ |
Kojto | 112:6f327212ef96 | 214 | SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */ |
Kojto | 112:6f327212ef96 | 215 | SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ |
Kojto | 112:6f327212ef96 | 216 | SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ |
Kojto | 112:6f327212ef96 | 217 | SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ |
Kojto | 112:6f327212ef96 | 218 | SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ |
Kojto | 112:6f327212ef96 | 219 | SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ |
Kojto | 112:6f327212ef96 | 220 | SD_CC_ERROR = (18), /*!< Internal card controller error */ |
Kojto | 112:6f327212ef96 | 221 | SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */ |
Kojto | 112:6f327212ef96 | 222 | SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ |
Kojto | 112:6f327212ef96 | 223 | SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ |
Kojto | 112:6f327212ef96 | 224 | SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ |
Kojto | 112:6f327212ef96 | 225 | SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */ |
Kojto | 112:6f327212ef96 | 226 | SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ |
Kojto | 112:6f327212ef96 | 227 | SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ |
Kojto | 112:6f327212ef96 | 228 | SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ |
Kojto | 112:6f327212ef96 | 229 | SD_INVALID_VOLTRANGE = (27), |
Kojto | 112:6f327212ef96 | 230 | SD_ADDR_OUT_OF_RANGE = (28), |
Kojto | 112:6f327212ef96 | 231 | SD_SWITCH_ERROR = (29), |
Kojto | 112:6f327212ef96 | 232 | SD_SDIO_DISABLED = (30), |
Kojto | 112:6f327212ef96 | 233 | SD_SDIO_FUNCTION_BUSY = (31), |
Kojto | 112:6f327212ef96 | 234 | SD_SDIO_FUNCTION_FAILED = (32), |
Kojto | 112:6f327212ef96 | 235 | SD_SDIO_UNKNOWN_FUNCTION = (33), |
Kojto | 112:6f327212ef96 | 236 | |
Kojto | 112:6f327212ef96 | 237 | /** |
Kojto | 112:6f327212ef96 | 238 | * @brief Standard error defines |
Kojto | 112:6f327212ef96 | 239 | */ |
Kojto | 112:6f327212ef96 | 240 | SD_INTERNAL_ERROR = (34), |
Kojto | 112:6f327212ef96 | 241 | SD_NOT_CONFIGURED = (35), |
Kojto | 112:6f327212ef96 | 242 | SD_REQUEST_PENDING = (36), |
Kojto | 112:6f327212ef96 | 243 | SD_REQUEST_NOT_APPLICABLE = (37), |
Kojto | 112:6f327212ef96 | 244 | SD_INVALID_PARAMETER = (38), |
Kojto | 112:6f327212ef96 | 245 | SD_UNSUPPORTED_FEATURE = (39), |
Kojto | 112:6f327212ef96 | 246 | SD_UNSUPPORTED_HW = (40), |
Kojto | 112:6f327212ef96 | 247 | SD_ERROR = (41), |
Kojto | 112:6f327212ef96 | 248 | SD_OK = (0) |
Kojto | 112:6f327212ef96 | 249 | |
Kojto | 112:6f327212ef96 | 250 | }HAL_SD_ErrorTypedef; |
Kojto | 112:6f327212ef96 | 251 | |
Kojto | 112:6f327212ef96 | 252 | /** |
Kojto | 112:6f327212ef96 | 253 | * @brief SD Transfer state enumeration structure |
Kojto | 112:6f327212ef96 | 254 | */ |
Kojto | 112:6f327212ef96 | 255 | typedef enum |
Kojto | 112:6f327212ef96 | 256 | { |
Kojto | 112:6f327212ef96 | 257 | SD_TRANSFER_OK = 0, /*!< Transfer success */ |
Kojto | 112:6f327212ef96 | 258 | SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */ |
Kojto | 112:6f327212ef96 | 259 | SD_TRANSFER_ERROR = 2 /*!< Transfer failed */ |
Kojto | 112:6f327212ef96 | 260 | |
Kojto | 112:6f327212ef96 | 261 | }HAL_SD_TransferStateTypedef; |
Kojto | 112:6f327212ef96 | 262 | |
Kojto | 112:6f327212ef96 | 263 | /** |
Kojto | 112:6f327212ef96 | 264 | * @brief SD Card State enumeration structure |
Kojto | 112:6f327212ef96 | 265 | */ |
Kojto | 112:6f327212ef96 | 266 | typedef enum |
Kojto | 112:6f327212ef96 | 267 | { |
Kojto | 112:6f327212ef96 | 268 | SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */ |
Kojto | 112:6f327212ef96 | 269 | SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */ |
Kojto | 112:6f327212ef96 | 270 | SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */ |
Kojto | 112:6f327212ef96 | 271 | SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */ |
Kojto | 112:6f327212ef96 | 272 | SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */ |
Kojto | 112:6f327212ef96 | 273 | SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */ |
Kojto | 112:6f327212ef96 | 274 | SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */ |
Kojto | 112:6f327212ef96 | 275 | SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */ |
Kojto | 112:6f327212ef96 | 276 | SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */ |
Kojto | 112:6f327212ef96 | 277 | |
Kojto | 112:6f327212ef96 | 278 | }HAL_SD_CardStateTypedef; |
Kojto | 112:6f327212ef96 | 279 | |
Kojto | 112:6f327212ef96 | 280 | /** |
Kojto | 112:6f327212ef96 | 281 | * @brief SD Operation enumeration structure |
Kojto | 112:6f327212ef96 | 282 | */ |
Kojto | 112:6f327212ef96 | 283 | typedef enum |
Kojto | 112:6f327212ef96 | 284 | { |
Kojto | 112:6f327212ef96 | 285 | SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */ |
Kojto | 112:6f327212ef96 | 286 | SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */ |
Kojto | 112:6f327212ef96 | 287 | SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */ |
Kojto | 112:6f327212ef96 | 288 | SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */ |
Kojto | 112:6f327212ef96 | 289 | |
Kojto | 112:6f327212ef96 | 290 | }HAL_SD_OperationTypedef; |
Kojto | 112:6f327212ef96 | 291 | |
Kojto | 112:6f327212ef96 | 292 | /** |
Kojto | 112:6f327212ef96 | 293 | * @} |
Kojto | 112:6f327212ef96 | 294 | */ |
Kojto | 112:6f327212ef96 | 295 | |
Kojto | 112:6f327212ef96 | 296 | /* Exported constants --------------------------------------------------------*/ |
Kojto | 112:6f327212ef96 | 297 | /** @defgroup SD_Exported_Constants SD Exported Constants |
Kojto | 112:6f327212ef96 | 298 | * @{ |
Kojto | 112:6f327212ef96 | 299 | */ |
Kojto | 112:6f327212ef96 | 300 | |
Kojto | 112:6f327212ef96 | 301 | /** |
Kojto | 112:6f327212ef96 | 302 | * @brief SD Commands Index |
Kojto | 112:6f327212ef96 | 303 | */ |
Kojto | 112:6f327212ef96 | 304 | #define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ |
Kojto | 112:6f327212ef96 | 305 | #define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ |
Kojto | 112:6f327212ef96 | 306 | #define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ |
Kojto | 112:6f327212ef96 | 307 | #define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ |
Kojto | 112:6f327212ef96 | 308 | #define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ |
Kojto | 112:6f327212ef96 | 309 | #define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its |
Kojto | 112:6f327212ef96 | 310 | operating condition register (OCR) content in the response on the CMD line. */ |
Kojto | 112:6f327212ef96 | 311 | #define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ |
Kojto | 112:6f327212ef96 | 312 | #define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ |
Kojto | 112:6f327212ef96 | 313 | #define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information |
Kojto | 112:6f327212ef96 | 314 | and asks the card whether card supports voltage. */ |
Kojto | 112:6f327212ef96 | 315 | #define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ |
Kojto | 112:6f327212ef96 | 316 | #define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ |
Kojto | 112:6f327212ef96 | 317 | #define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ |
Kojto | 112:6f327212ef96 | 318 | #define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ |
Kojto | 112:6f327212ef96 | 319 | #define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ |
Kojto | 112:6f327212ef96 | 320 | #define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) |
Kojto | 112:6f327212ef96 | 321 | #define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ |
Kojto | 112:6f327212ef96 | 322 | #define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands |
Kojto | 112:6f327212ef96 | 323 | (read, write, lock). Default block length is fixed to 512 Bytes. Not effective |
Kojto | 112:6f327212ef96 | 324 | for SDHS and SDXC. */ |
Kojto | 112:6f327212ef96 | 325 | #define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of |
Kojto | 112:6f327212ef96 | 326 | fixed 512 bytes in case of SDHC and SDXC. */ |
Kojto | 112:6f327212ef96 | 327 | #define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by |
Kojto | 112:6f327212ef96 | 328 | STOP_TRANSMISSION command. */ |
Kojto | 112:6f327212ef96 | 329 | #define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ |
Kojto | 112:6f327212ef96 | 330 | #define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ |
Kojto | 112:6f327212ef96 | 331 | #define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ |
Kojto | 112:6f327212ef96 | 332 | #define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of |
Kojto | 112:6f327212ef96 | 333 | fixed 512 bytes in case of SDHC and SDXC. */ |
Kojto | 112:6f327212ef96 | 334 | #define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ |
Kojto | 112:6f327212ef96 | 335 | #define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ |
Kojto | 112:6f327212ef96 | 336 | #define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ |
Kojto | 112:6f327212ef96 | 337 | #define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ |
Kojto | 112:6f327212ef96 | 338 | #define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ |
Kojto | 112:6f327212ef96 | 339 | #define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ |
Kojto | 112:6f327212ef96 | 340 | #define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ |
Kojto | 112:6f327212ef96 | 341 | #define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ |
Kojto | 112:6f327212ef96 | 342 | #define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command |
Kojto | 112:6f327212ef96 | 343 | system set by switch function command (CMD6). */ |
Kojto | 112:6f327212ef96 | 344 | #define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. |
Kojto | 112:6f327212ef96 | 345 | Reserved for each command system set by switch function command (CMD6). */ |
Kojto | 112:6f327212ef96 | 346 | #define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ |
Kojto | 112:6f327212ef96 | 347 | #define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ |
Kojto | 112:6f327212ef96 | 348 | #define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ |
Kojto | 112:6f327212ef96 | 349 | #define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by |
Kojto | 112:6f327212ef96 | 350 | the SET_BLOCK_LEN command. */ |
Kojto | 112:6f327212ef96 | 351 | #define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather |
Kojto | 112:6f327212ef96 | 352 | than a standard command. */ |
Kojto | 112:6f327212ef96 | 353 | #define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card |
Kojto | 112:6f327212ef96 | 354 | for general purpose/application specific commands. */ |
Kojto | 112:6f327212ef96 | 355 | #define SD_CMD_NO_CMD ((uint8_t)64) |
Kojto | 112:6f327212ef96 | 356 | |
Kojto | 112:6f327212ef96 | 357 | /** |
Kojto | 112:6f327212ef96 | 358 | * @brief Following commands are SD Card Specific commands. |
Kojto | 112:6f327212ef96 | 359 | * SDIO_APP_CMD should be sent before sending these commands. |
Kojto | 112:6f327212ef96 | 360 | */ |
Kojto | 112:6f327212ef96 | 361 | #define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus |
Kojto | 112:6f327212ef96 | 362 | widths are given in SCR register. */ |
Kojto | 112:6f327212ef96 | 363 | #define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ |
Kojto | 112:6f327212ef96 | 364 | #define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with |
Kojto | 112:6f327212ef96 | 365 | 32bit+CRC data block. */ |
Kojto | 112:6f327212ef96 | 366 | #define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to |
Kojto | 112:6f327212ef96 | 367 | send its operating condition register (OCR) content in the response on the CMD line. */ |
Kojto | 112:6f327212ef96 | 368 | #define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */ |
Kojto | 112:6f327212ef96 | 369 | #define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ |
Kojto | 112:6f327212ef96 | 370 | #define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ |
Kojto | 112:6f327212ef96 | 371 | #define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ |
Kojto | 112:6f327212ef96 | 372 | |
Kojto | 112:6f327212ef96 | 373 | /** |
Kojto | 112:6f327212ef96 | 374 | * @brief Following commands are SD Card Specific security commands. |
Kojto | 112:6f327212ef96 | 375 | * SD_CMD_APP_CMD should be sent before sending these commands. |
Kojto | 112:6f327212ef96 | 376 | */ |
Kojto | 112:6f327212ef96 | 377 | #define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 378 | #define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 379 | #define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 380 | #define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 381 | #define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 382 | #define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 383 | #define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 384 | #define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 385 | #define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 386 | #define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 387 | #define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */ |
Kojto | 112:6f327212ef96 | 388 | |
Kojto | 112:6f327212ef96 | 389 | /** |
Kojto | 112:6f327212ef96 | 390 | * @brief Supported SD Memory Cards |
Kojto | 112:6f327212ef96 | 391 | */ |
Kojto | 112:6f327212ef96 | 392 | #define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) |
Kojto | 112:6f327212ef96 | 393 | #define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) |
Kojto | 112:6f327212ef96 | 394 | #define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) |
Kojto | 112:6f327212ef96 | 395 | #define MULTIMEDIA_CARD ((uint32_t)0x00000003) |
Kojto | 112:6f327212ef96 | 396 | #define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) |
Kojto | 112:6f327212ef96 | 397 | #define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) |
Kojto | 112:6f327212ef96 | 398 | #define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) |
Kojto | 112:6f327212ef96 | 399 | #define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) |
Kojto | 112:6f327212ef96 | 400 | /** |
Kojto | 112:6f327212ef96 | 401 | * @} |
Kojto | 112:6f327212ef96 | 402 | */ |
Kojto | 112:6f327212ef96 | 403 | |
Kojto | 112:6f327212ef96 | 404 | /* Exported macro ------------------------------------------------------------*/ |
Kojto | 112:6f327212ef96 | 405 | /** @defgroup SD_Exported_macros SD Exported Macros |
Kojto | 112:6f327212ef96 | 406 | * @brief macros to handle interrupts and specific clock configurations |
Kojto | 112:6f327212ef96 | 407 | * @{ |
Kojto | 112:6f327212ef96 | 408 | */ |
Kojto | 112:6f327212ef96 | 409 | |
Kojto | 112:6f327212ef96 | 410 | /** |
Kojto | 112:6f327212ef96 | 411 | * @brief Enable the SD device. |
Kojto | 112:6f327212ef96 | 412 | * @retval None |
Kojto | 112:6f327212ef96 | 413 | */ |
Kojto | 112:6f327212ef96 | 414 | #define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE() |
Kojto | 112:6f327212ef96 | 415 | |
Kojto | 112:6f327212ef96 | 416 | /** |
Kojto | 112:6f327212ef96 | 417 | * @brief Disable the SD device. |
Kojto | 112:6f327212ef96 | 418 | * @retval None |
Kojto | 112:6f327212ef96 | 419 | */ |
Kojto | 112:6f327212ef96 | 420 | #define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE() |
Kojto | 112:6f327212ef96 | 421 | |
Kojto | 112:6f327212ef96 | 422 | /** |
Kojto | 112:6f327212ef96 | 423 | * @brief Enable the SDIO DMA transfer. |
Kojto | 112:6f327212ef96 | 424 | * @retval None |
Kojto | 112:6f327212ef96 | 425 | */ |
Kojto | 112:6f327212ef96 | 426 | #define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE() |
Kojto | 112:6f327212ef96 | 427 | |
Kojto | 112:6f327212ef96 | 428 | /** |
Kojto | 112:6f327212ef96 | 429 | * @brief Disable the SDIO DMA transfer. |
Kojto | 112:6f327212ef96 | 430 | * @retval None |
Kojto | 112:6f327212ef96 | 431 | */ |
Kojto | 112:6f327212ef96 | 432 | #define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE() |
Kojto | 112:6f327212ef96 | 433 | |
Kojto | 112:6f327212ef96 | 434 | /** |
Kojto | 112:6f327212ef96 | 435 | * @brief Enable the SD device interrupt. |
Kojto | 112:6f327212ef96 | 436 | * @param __HANDLE__: SD Handle |
Kojto | 112:6f327212ef96 | 437 | * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled. |
Kojto | 112:6f327212ef96 | 438 | * This parameter can be one or a combination of the following values: |
Kojto | 112:6f327212ef96 | 439 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 440 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 441 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
Kojto | 112:6f327212ef96 | 442 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
Kojto | 112:6f327212ef96 | 443 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
Kojto | 112:6f327212ef96 | 444 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
Kojto | 112:6f327212ef96 | 445 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 446 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
Kojto | 112:6f327212ef96 | 447 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
Kojto | 112:6f327212ef96 | 448 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
Kojto | 112:6f327212ef96 | 449 | * bus mode interrupt |
Kojto | 112:6f327212ef96 | 450 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 451 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
Kojto | 112:6f327212ef96 | 452 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
Kojto | 112:6f327212ef96 | 453 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
Kojto | 112:6f327212ef96 | 454 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
Kojto | 112:6f327212ef96 | 455 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
Kojto | 112:6f327212ef96 | 456 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
Kojto | 112:6f327212ef96 | 457 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
Kojto | 112:6f327212ef96 | 458 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 459 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 460 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
Kojto | 112:6f327212ef96 | 461 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
Kojto | 112:6f327212ef96 | 462 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
Kojto | 112:6f327212ef96 | 463 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
Kojto | 112:6f327212ef96 | 464 | * @retval None |
Kojto | 112:6f327212ef96 | 465 | */ |
Kojto | 112:6f327212ef96 | 466 | #define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
Kojto | 112:6f327212ef96 | 467 | |
Kojto | 112:6f327212ef96 | 468 | /** |
Kojto | 112:6f327212ef96 | 469 | * @brief Disable the SD device interrupt. |
Kojto | 112:6f327212ef96 | 470 | * @param __HANDLE__: SD Handle |
Kojto | 112:6f327212ef96 | 471 | * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled. |
Kojto | 112:6f327212ef96 | 472 | * This parameter can be one or a combination of the following values: |
Kojto | 112:6f327212ef96 | 473 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 474 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 475 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
Kojto | 112:6f327212ef96 | 476 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
Kojto | 112:6f327212ef96 | 477 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
Kojto | 112:6f327212ef96 | 478 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
Kojto | 112:6f327212ef96 | 479 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 480 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
Kojto | 112:6f327212ef96 | 481 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
Kojto | 112:6f327212ef96 | 482 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
Kojto | 112:6f327212ef96 | 483 | * bus mode interrupt |
Kojto | 112:6f327212ef96 | 484 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 485 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
Kojto | 112:6f327212ef96 | 486 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
Kojto | 112:6f327212ef96 | 487 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
Kojto | 112:6f327212ef96 | 488 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
Kojto | 112:6f327212ef96 | 489 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
Kojto | 112:6f327212ef96 | 490 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
Kojto | 112:6f327212ef96 | 491 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
Kojto | 112:6f327212ef96 | 492 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 493 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 494 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
Kojto | 112:6f327212ef96 | 495 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
Kojto | 112:6f327212ef96 | 496 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
Kojto | 112:6f327212ef96 | 497 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
Kojto | 112:6f327212ef96 | 498 | * @retval None |
Kojto | 112:6f327212ef96 | 499 | */ |
Kojto | 112:6f327212ef96 | 500 | #define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
Kojto | 112:6f327212ef96 | 501 | |
Kojto | 112:6f327212ef96 | 502 | /** |
Kojto | 112:6f327212ef96 | 503 | * @brief Check whether the specified SD flag is set or not. |
Kojto | 112:6f327212ef96 | 504 | * @param __HANDLE__: SD Handle |
Kojto | 112:6f327212ef96 | 505 | * @param __FLAG__: specifies the flag to check. |
Kojto | 112:6f327212ef96 | 506 | * This parameter can be one of the following values: |
Kojto | 112:6f327212ef96 | 507 | * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
Kojto | 112:6f327212ef96 | 508 | * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
Kojto | 112:6f327212ef96 | 509 | * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
Kojto | 112:6f327212ef96 | 510 | * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
Kojto | 112:6f327212ef96 | 511 | * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
Kojto | 112:6f327212ef96 | 512 | * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
Kojto | 112:6f327212ef96 | 513 | * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
Kojto | 112:6f327212ef96 | 514 | * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
Kojto | 112:6f327212ef96 | 515 | * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) |
Kojto | 112:6f327212ef96 | 516 | * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. |
Kojto | 112:6f327212ef96 | 517 | * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
Kojto | 112:6f327212ef96 | 518 | * @arg SDIO_FLAG_CMDACT: Command transfer in progress |
Kojto | 112:6f327212ef96 | 519 | * @arg SDIO_FLAG_TXACT: Data transmit in progress |
Kojto | 112:6f327212ef96 | 520 | * @arg SDIO_FLAG_RXACT: Data receive in progress |
Kojto | 112:6f327212ef96 | 521 | * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty |
Kojto | 112:6f327212ef96 | 522 | * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full |
Kojto | 112:6f327212ef96 | 523 | * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full |
Kojto | 112:6f327212ef96 | 524 | * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full |
Kojto | 112:6f327212ef96 | 525 | * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty |
Kojto | 112:6f327212ef96 | 526 | * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty |
Kojto | 112:6f327212ef96 | 527 | * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO |
Kojto | 112:6f327212ef96 | 528 | * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO |
Kojto | 112:6f327212ef96 | 529 | * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
Kojto | 112:6f327212ef96 | 530 | * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 |
Kojto | 112:6f327212ef96 | 531 | * @retval The new state of SD FLAG (SET or RESET). |
Kojto | 112:6f327212ef96 | 532 | */ |
Kojto | 112:6f327212ef96 | 533 | #define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
Kojto | 112:6f327212ef96 | 534 | |
Kojto | 112:6f327212ef96 | 535 | /** |
Kojto | 112:6f327212ef96 | 536 | * @brief Clear the SD's pending flags. |
Kojto | 112:6f327212ef96 | 537 | * @param __HANDLE__: SD Handle |
Kojto | 112:6f327212ef96 | 538 | * @param __FLAG__: specifies the flag to clear. |
Kojto | 112:6f327212ef96 | 539 | * This parameter can be one or a combination of the following values: |
Kojto | 112:6f327212ef96 | 540 | * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) |
Kojto | 112:6f327212ef96 | 541 | * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) |
Kojto | 112:6f327212ef96 | 542 | * @arg SDIO_FLAG_CTIMEOUT: Command response timeout |
Kojto | 112:6f327212ef96 | 543 | * @arg SDIO_FLAG_DTIMEOUT: Data timeout |
Kojto | 112:6f327212ef96 | 544 | * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error |
Kojto | 112:6f327212ef96 | 545 | * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error |
Kojto | 112:6f327212ef96 | 546 | * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) |
Kojto | 112:6f327212ef96 | 547 | * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) |
Kojto | 112:6f327212ef96 | 548 | * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) |
Kojto | 112:6f327212ef96 | 549 | * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode |
Kojto | 112:6f327212ef96 | 550 | * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) |
Kojto | 112:6f327212ef96 | 551 | * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received |
Kojto | 112:6f327212ef96 | 552 | * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 |
Kojto | 112:6f327212ef96 | 553 | * @retval None |
Kojto | 112:6f327212ef96 | 554 | */ |
Kojto | 112:6f327212ef96 | 555 | #define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) |
Kojto | 112:6f327212ef96 | 556 | |
Kojto | 112:6f327212ef96 | 557 | /** |
Kojto | 112:6f327212ef96 | 558 | * @brief Check whether the specified SD interrupt has occurred or not. |
Kojto | 112:6f327212ef96 | 559 | * @param __HANDLE__: SD Handle |
Kojto | 112:6f327212ef96 | 560 | * @param __INTERRUPT__: specifies the SDIO interrupt source to check. |
Kojto | 112:6f327212ef96 | 561 | * This parameter can be one of the following values: |
Kojto | 112:6f327212ef96 | 562 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 563 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 564 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
Kojto | 112:6f327212ef96 | 565 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
Kojto | 112:6f327212ef96 | 566 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
Kojto | 112:6f327212ef96 | 567 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
Kojto | 112:6f327212ef96 | 568 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 569 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
Kojto | 112:6f327212ef96 | 570 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt |
Kojto | 112:6f327212ef96 | 571 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
Kojto | 112:6f327212ef96 | 572 | * bus mode interrupt |
Kojto | 112:6f327212ef96 | 573 | * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 574 | * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt |
Kojto | 112:6f327212ef96 | 575 | * @arg SDIO_IT_TXACT: Data transmit in progress interrupt |
Kojto | 112:6f327212ef96 | 576 | * @arg SDIO_IT_RXACT: Data receive in progress interrupt |
Kojto | 112:6f327212ef96 | 577 | * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt |
Kojto | 112:6f327212ef96 | 578 | * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt |
Kojto | 112:6f327212ef96 | 579 | * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt |
Kojto | 112:6f327212ef96 | 580 | * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt |
Kojto | 112:6f327212ef96 | 581 | * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 582 | * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt |
Kojto | 112:6f327212ef96 | 583 | * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt |
Kojto | 112:6f327212ef96 | 584 | * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt |
Kojto | 112:6f327212ef96 | 585 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
Kojto | 112:6f327212ef96 | 586 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt |
Kojto | 112:6f327212ef96 | 587 | * @retval The new state of SD IT (SET or RESET). |
Kojto | 112:6f327212ef96 | 588 | */ |
Kojto | 112:6f327212ef96 | 589 | #define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__) |
Kojto | 112:6f327212ef96 | 590 | |
Kojto | 112:6f327212ef96 | 591 | /** |
Kojto | 112:6f327212ef96 | 592 | * @brief Clear the SD's interrupt pending bits. |
Kojto | 112:6f327212ef96 | 593 | * @param __HANDLE__ : SD Handle |
Kojto | 112:6f327212ef96 | 594 | * @param __INTERRUPT__: specifies the interrupt pending bit to clear. |
Kojto | 112:6f327212ef96 | 595 | * This parameter can be one or a combination of the following values: |
Kojto | 112:6f327212ef96 | 596 | * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 597 | * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt |
Kojto | 112:6f327212ef96 | 598 | * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt |
Kojto | 112:6f327212ef96 | 599 | * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt |
Kojto | 112:6f327212ef96 | 600 | * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt |
Kojto | 112:6f327212ef96 | 601 | * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt |
Kojto | 112:6f327212ef96 | 602 | * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt |
Kojto | 112:6f327212ef96 | 603 | * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt |
Kojto | 112:6f327212ef96 | 604 | * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt |
Kojto | 112:6f327212ef96 | 605 | * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide |
Kojto | 112:6f327212ef96 | 606 | * bus mode interrupt |
Kojto | 112:6f327212ef96 | 607 | * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt |
Kojto | 112:6f327212ef96 | 608 | * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 |
Kojto | 112:6f327212ef96 | 609 | * @retval None |
Kojto | 112:6f327212ef96 | 610 | */ |
Kojto | 112:6f327212ef96 | 611 | #define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) |
Kojto | 112:6f327212ef96 | 612 | /** |
Kojto | 112:6f327212ef96 | 613 | * @} |
Kojto | 112:6f327212ef96 | 614 | */ |
Kojto | 112:6f327212ef96 | 615 | |
Kojto | 112:6f327212ef96 | 616 | /* Exported functions --------------------------------------------------------*/ |
Kojto | 112:6f327212ef96 | 617 | /** @addtogroup SD_Exported_Functions |
Kojto | 112:6f327212ef96 | 618 | * @{ |
Kojto | 112:6f327212ef96 | 619 | */ |
Kojto | 112:6f327212ef96 | 620 | |
Kojto | 112:6f327212ef96 | 621 | /* Initialization and de-initialization functions **********************************/ |
Kojto | 112:6f327212ef96 | 622 | /** @addtogroup SD_Exported_Functions_Group1 |
Kojto | 112:6f327212ef96 | 623 | * @{ |
Kojto | 112:6f327212ef96 | 624 | */ |
Kojto | 112:6f327212ef96 | 625 | HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo); |
Kojto | 112:6f327212ef96 | 626 | HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 627 | void HAL_SD_MspInit(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 628 | void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 629 | /** |
Kojto | 112:6f327212ef96 | 630 | * @} |
Kojto | 112:6f327212ef96 | 631 | */ |
Kojto | 112:6f327212ef96 | 632 | |
Kojto | 112:6f327212ef96 | 633 | /* I/O operation functions *****************************************************/ |
Kojto | 112:6f327212ef96 | 634 | /** @addtogroup SD_Exported_Functions_Group2 |
Kojto | 112:6f327212ef96 | 635 | * @{ |
Kojto | 112:6f327212ef96 | 636 | */ |
Kojto | 112:6f327212ef96 | 637 | /* Blocking mode: Polling */ |
Kojto | 112:6f327212ef96 | 638 | HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
Kojto | 112:6f327212ef96 | 639 | HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
Kojto | 112:6f327212ef96 | 640 | HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr); |
Kojto | 112:6f327212ef96 | 641 | |
Kojto | 112:6f327212ef96 | 642 | /* Non-Blocking mode: Interrupt */ |
Kojto | 112:6f327212ef96 | 643 | void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 644 | |
Kojto | 112:6f327212ef96 | 645 | /* Callback in non blocking modes (DMA) */ |
Kojto | 112:6f327212ef96 | 646 | void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma); |
Kojto | 112:6f327212ef96 | 647 | void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma); |
Kojto | 112:6f327212ef96 | 648 | void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma); |
Kojto | 112:6f327212ef96 | 649 | void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma); |
Kojto | 112:6f327212ef96 | 650 | void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 651 | void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 652 | |
Kojto | 112:6f327212ef96 | 653 | /* Non-Blocking mode: DMA */ |
Kojto | 112:6f327212ef96 | 654 | HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
Kojto | 112:6f327212ef96 | 655 | HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); |
Kojto | 112:6f327212ef96 | 656 | HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); |
Kojto | 112:6f327212ef96 | 657 | HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); |
Kojto | 112:6f327212ef96 | 658 | /** |
Kojto | 112:6f327212ef96 | 659 | * @} |
Kojto | 112:6f327212ef96 | 660 | */ |
Kojto | 112:6f327212ef96 | 661 | |
Kojto | 112:6f327212ef96 | 662 | /* Peripheral Control functions ************************************************/ |
Kojto | 112:6f327212ef96 | 663 | /** @addtogroup SD_Exported_Functions_Group3 |
Kojto | 112:6f327212ef96 | 664 | * @{ |
Kojto | 112:6f327212ef96 | 665 | */ |
Kojto | 112:6f327212ef96 | 666 | HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo); |
Kojto | 112:6f327212ef96 | 667 | HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode); |
Kojto | 112:6f327212ef96 | 668 | HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 669 | HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 670 | /** |
Kojto | 112:6f327212ef96 | 671 | * @} |
Kojto | 112:6f327212ef96 | 672 | */ |
Kojto | 112:6f327212ef96 | 673 | |
Kojto | 112:6f327212ef96 | 674 | /* Peripheral State functions **************************************************/ |
Kojto | 112:6f327212ef96 | 675 | /** @addtogroup SD_Exported_Functions_Group4 |
Kojto | 112:6f327212ef96 | 676 | * @{ |
Kojto | 112:6f327212ef96 | 677 | */ |
Kojto | 112:6f327212ef96 | 678 | HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); |
Kojto | 112:6f327212ef96 | 679 | HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus); |
Kojto | 112:6f327212ef96 | 680 | HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd); |
Kojto | 112:6f327212ef96 | 681 | /** |
Kojto | 112:6f327212ef96 | 682 | * @} |
Kojto | 112:6f327212ef96 | 683 | */ |
Kojto | 112:6f327212ef96 | 684 | |
Kojto | 112:6f327212ef96 | 685 | /** |
Kojto | 112:6f327212ef96 | 686 | * @} |
Kojto | 112:6f327212ef96 | 687 | */ |
Kojto | 112:6f327212ef96 | 688 | |
Kojto | 112:6f327212ef96 | 689 | /** |
Kojto | 112:6f327212ef96 | 690 | * @} |
Kojto | 112:6f327212ef96 | 691 | */ |
Kojto | 112:6f327212ef96 | 692 | |
Kojto | 112:6f327212ef96 | 693 | /** |
Kojto | 112:6f327212ef96 | 694 | * @} |
Kojto | 112:6f327212ef96 | 695 | */ |
Kojto | 112:6f327212ef96 | 696 | |
Kojto | 112:6f327212ef96 | 697 | #ifdef __cplusplus |
Kojto | 112:6f327212ef96 | 698 | } |
Kojto | 112:6f327212ef96 | 699 | #endif |
Kojto | 112:6f327212ef96 | 700 | |
Kojto | 112:6f327212ef96 | 701 | #endif /* STM32L151xD || STM32L152xD || STM32L162xD */ |
Kojto | 112:6f327212ef96 | 702 | |
Kojto | 112:6f327212ef96 | 703 | #endif /* __STM32L1xx_HAL_SD_H */ |
Kojto | 112:6f327212ef96 | 704 | |
Kojto | 112:6f327212ef96 | 705 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |