Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.
Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB
Fork of mbed by
TARGET_DISCO_F429ZI/stm32f4xx_hal_conf.h@121:672067c3ada4, 2016-04-14 (annotated)
- Committer:
- elijahorr
- Date:
- Thu Apr 14 07:28:54 2016 +0000
- Revision:
- 121:672067c3ada4
- Parent:
- 110:165afa46840b
.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Kojto | 110:165afa46840b | 1 | /** |
Kojto | 110:165afa46840b | 2 | ****************************************************************************** |
Kojto | 110:165afa46840b | 3 | * @file stm32f4xx_hal_conf.h |
Kojto | 110:165afa46840b | 4 | * @author MCD Application Team |
Kojto | 110:165afa46840b | 5 | * @version V1.2.1 |
Kojto | 110:165afa46840b | 6 | * @date 13-March-2015 |
Kojto | 110:165afa46840b | 7 | * @brief HAL configuration file |
Kojto | 110:165afa46840b | 8 | ****************************************************************************** |
Kojto | 110:165afa46840b | 9 | * @attention |
Kojto | 110:165afa46840b | 10 | * |
Kojto | 110:165afa46840b | 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
Kojto | 110:165afa46840b | 12 | * |
Kojto | 110:165afa46840b | 13 | * Redistribution and use in source and binary forms, with or without modification, |
Kojto | 110:165afa46840b | 14 | * are permitted provided that the following conditions are met: |
Kojto | 110:165afa46840b | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
Kojto | 110:165afa46840b | 16 | * this list of conditions and the following disclaimer. |
Kojto | 110:165afa46840b | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
Kojto | 110:165afa46840b | 18 | * this list of conditions and the following disclaimer in the documentation |
Kojto | 110:165afa46840b | 19 | * and/or other materials provided with the distribution. |
Kojto | 110:165afa46840b | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
Kojto | 110:165afa46840b | 21 | * may be used to endorse or promote products derived from this software |
Kojto | 110:165afa46840b | 22 | * without specific prior written permission. |
Kojto | 110:165afa46840b | 23 | * |
Kojto | 110:165afa46840b | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
Kojto | 110:165afa46840b | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
Kojto | 110:165afa46840b | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
Kojto | 110:165afa46840b | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
Kojto | 110:165afa46840b | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
Kojto | 110:165afa46840b | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
Kojto | 110:165afa46840b | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Kojto | 110:165afa46840b | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Kojto | 110:165afa46840b | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Kojto | 110:165afa46840b | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Kojto | 110:165afa46840b | 34 | * |
Kojto | 110:165afa46840b | 35 | ****************************************************************************** |
Kojto | 110:165afa46840b | 36 | */ |
Kojto | 110:165afa46840b | 37 | |
Kojto | 110:165afa46840b | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
Kojto | 110:165afa46840b | 39 | #ifndef __STM32F4xx_HAL_CONF_H |
Kojto | 110:165afa46840b | 40 | #define __STM32F4xx_HAL_CONF_H |
Kojto | 110:165afa46840b | 41 | |
Kojto | 110:165afa46840b | 42 | #ifdef __cplusplus |
Kojto | 110:165afa46840b | 43 | extern "C" { |
Kojto | 110:165afa46840b | 44 | #endif |
Kojto | 110:165afa46840b | 45 | |
Kojto | 110:165afa46840b | 46 | /* Exported types ------------------------------------------------------------*/ |
Kojto | 110:165afa46840b | 47 | /* Exported constants --------------------------------------------------------*/ |
Kojto | 110:165afa46840b | 48 | |
Kojto | 110:165afa46840b | 49 | /* ########################## Module Selection ############################## */ |
Kojto | 110:165afa46840b | 50 | /** |
Kojto | 110:165afa46840b | 51 | * @brief This is the list of modules to be used in the HAL driver |
Kojto | 110:165afa46840b | 52 | */ |
Kojto | 110:165afa46840b | 53 | #define HAL_MODULE_ENABLED |
Kojto | 110:165afa46840b | 54 | #define HAL_ADC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 55 | #define HAL_CAN_MODULE_ENABLED |
Kojto | 110:165afa46840b | 56 | #define HAL_CRC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 57 | /* #define HAL_CRYP_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 58 | #define HAL_DAC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 59 | #define HAL_DCMI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 60 | #define HAL_DMA_MODULE_ENABLED |
Kojto | 110:165afa46840b | 61 | #define HAL_DMA2D_MODULE_ENABLED |
Kojto | 110:165afa46840b | 62 | #define HAL_ETH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 63 | #define HAL_FLASH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 64 | #define HAL_NAND_MODULE_ENABLED |
Kojto | 110:165afa46840b | 65 | #define HAL_NOR_MODULE_ENABLED |
Kojto | 110:165afa46840b | 66 | #define HAL_PCCARD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 67 | #define HAL_SRAM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 68 | #define HAL_SDRAM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 69 | #define HAL_HASH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 70 | #define HAL_GPIO_MODULE_ENABLED |
Kojto | 110:165afa46840b | 71 | #define HAL_I2C_MODULE_ENABLED |
Kojto | 110:165afa46840b | 72 | #define HAL_I2S_MODULE_ENABLED |
Kojto | 110:165afa46840b | 73 | #define HAL_IWDG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 74 | #define HAL_LTDC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 75 | #define HAL_PWR_MODULE_ENABLED |
Kojto | 110:165afa46840b | 76 | #define HAL_RCC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 77 | #define HAL_RNG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 78 | #define HAL_RTC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 79 | #define HAL_SAI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 80 | #define HAL_SD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 81 | #define HAL_SPI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 82 | #define HAL_TIM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 83 | #define HAL_UART_MODULE_ENABLED |
Kojto | 110:165afa46840b | 84 | #define HAL_USART_MODULE_ENABLED |
Kojto | 110:165afa46840b | 85 | #define HAL_IRDA_MODULE_ENABLED |
Kojto | 110:165afa46840b | 86 | #define HAL_SMARTCARD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 87 | #define HAL_WWDG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 88 | #define HAL_CORTEX_MODULE_ENABLED |
Kojto | 110:165afa46840b | 89 | #define HAL_PCD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 90 | #define HAL_HCD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 91 | |
Kojto | 110:165afa46840b | 92 | |
Kojto | 110:165afa46840b | 93 | /* ########################## HSE/HSI Values adaptation ##################### */ |
Kojto | 110:165afa46840b | 94 | /** |
Kojto | 110:165afa46840b | 95 | * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. |
Kojto | 110:165afa46840b | 96 | * This value is used by the RCC HAL module to compute the system frequency |
Kojto | 110:165afa46840b | 97 | * (when HSE is used as system clock source, directly or through the PLL). |
Kojto | 110:165afa46840b | 98 | */ |
Kojto | 110:165afa46840b | 99 | #if !defined (HSE_VALUE) |
Kojto | 110:165afa46840b | 100 | #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ |
Kojto | 110:165afa46840b | 101 | #endif /* HSE_VALUE */ |
Kojto | 110:165afa46840b | 102 | |
Kojto | 110:165afa46840b | 103 | #if !defined (HSE_STARTUP_TIMEOUT) |
Kojto | 110:165afa46840b | 104 | #define HSE_STARTUP_TIMEOUT ((uint32_t)200) /*!< Time out for HSE start up, in ms */ |
Kojto | 110:165afa46840b | 105 | #endif /* HSE_STARTUP_TIMEOUT */ |
Kojto | 110:165afa46840b | 106 | |
Kojto | 110:165afa46840b | 107 | /** |
Kojto | 110:165afa46840b | 108 | * @brief Internal High Speed oscillator (HSI) value. |
Kojto | 110:165afa46840b | 109 | * This value is used by the RCC HAL module to compute the system frequency |
Kojto | 110:165afa46840b | 110 | * (when HSI is used as system clock source, directly or through the PLL). |
Kojto | 110:165afa46840b | 111 | */ |
Kojto | 110:165afa46840b | 112 | #if !defined (HSI_VALUE) |
Kojto | 110:165afa46840b | 113 | #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ |
Kojto | 110:165afa46840b | 114 | #endif /* HSI_VALUE */ |
Kojto | 110:165afa46840b | 115 | |
Kojto | 110:165afa46840b | 116 | /** |
Kojto | 110:165afa46840b | 117 | * @brief Internal Low Speed oscillator (LSI) value. |
Kojto | 110:165afa46840b | 118 | */ |
Kojto | 110:165afa46840b | 119 | #if !defined (LSI_VALUE) |
Kojto | 110:165afa46840b | 120 | #define LSI_VALUE ((uint32_t)32000) |
Kojto | 110:165afa46840b | 121 | #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz |
Kojto | 110:165afa46840b | 122 | The real value may vary depending on the variations |
Kojto | 110:165afa46840b | 123 | in voltage and temperature. */ |
Kojto | 110:165afa46840b | 124 | /** |
Kojto | 110:165afa46840b | 125 | * @brief External Low Speed oscillator (LSE) value. |
Kojto | 110:165afa46840b | 126 | */ |
Kojto | 110:165afa46840b | 127 | #if !defined (LSE_VALUE) |
Kojto | 110:165afa46840b | 128 | #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ |
Kojto | 110:165afa46840b | 129 | #endif /* LSE_VALUE */ |
Kojto | 110:165afa46840b | 130 | |
Kojto | 110:165afa46840b | 131 | /** |
Kojto | 110:165afa46840b | 132 | * @brief External clock source for I2S peripheral |
Kojto | 110:165afa46840b | 133 | * This value is used by the I2S HAL module to compute the I2S clock source |
Kojto | 110:165afa46840b | 134 | * frequency, this source is inserted directly through I2S_CKIN pad. |
Kojto | 110:165afa46840b | 135 | */ |
Kojto | 110:165afa46840b | 136 | #if !defined (EXTERNAL_CLOCK_VALUE) |
Kojto | 110:165afa46840b | 137 | #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ |
Kojto | 110:165afa46840b | 138 | #endif /* EXTERNAL_CLOCK_VALUE */ |
Kojto | 110:165afa46840b | 139 | |
Kojto | 110:165afa46840b | 140 | /* Tip: To avoid modifying this file each time you need to use different HSE, |
Kojto | 110:165afa46840b | 141 | === you can define the HSE value in your toolchain compiler preprocessor. */ |
Kojto | 110:165afa46840b | 142 | |
Kojto | 110:165afa46840b | 143 | /* ########################### System Configuration ######################### */ |
Kojto | 110:165afa46840b | 144 | /** |
Kojto | 110:165afa46840b | 145 | * @brief This is the HAL system configuration section |
Kojto | 110:165afa46840b | 146 | */ |
Kojto | 110:165afa46840b | 147 | #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ |
Kojto | 110:165afa46840b | 148 | #define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ |
Kojto | 110:165afa46840b | 149 | #define USE_RTOS 0 |
Kojto | 110:165afa46840b | 150 | #define PREFETCH_ENABLE 1 |
Kojto | 110:165afa46840b | 151 | #define INSTRUCTION_CACHE_ENABLE 1 |
Kojto | 110:165afa46840b | 152 | #define DATA_CACHE_ENABLE 1 |
Kojto | 110:165afa46840b | 153 | |
Kojto | 110:165afa46840b | 154 | /* ########################## Assert Selection ############################## */ |
Kojto | 110:165afa46840b | 155 | /** |
Kojto | 110:165afa46840b | 156 | * @brief Uncomment the line below to expanse the "assert_param" macro in the |
Kojto | 110:165afa46840b | 157 | * HAL drivers code |
Kojto | 110:165afa46840b | 158 | */ |
Kojto | 110:165afa46840b | 159 | /* #define USE_FULL_ASSERT 1 */ |
Kojto | 110:165afa46840b | 160 | |
Kojto | 110:165afa46840b | 161 | /* ################## Ethernet peripheral configuration ##################### */ |
Kojto | 110:165afa46840b | 162 | |
Kojto | 110:165afa46840b | 163 | /* Section 1 : Ethernet peripheral configuration */ |
Kojto | 110:165afa46840b | 164 | |
Kojto | 110:165afa46840b | 165 | /* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ |
Kojto | 110:165afa46840b | 166 | #define MAC_ADDR0 2 |
Kojto | 110:165afa46840b | 167 | #define MAC_ADDR1 0 |
Kojto | 110:165afa46840b | 168 | #define MAC_ADDR2 0 |
Kojto | 110:165afa46840b | 169 | #define MAC_ADDR3 0 |
Kojto | 110:165afa46840b | 170 | #define MAC_ADDR4 0 |
Kojto | 110:165afa46840b | 171 | #define MAC_ADDR5 0 |
Kojto | 110:165afa46840b | 172 | |
Kojto | 110:165afa46840b | 173 | /* Definition of the Ethernet driver buffers size and count */ |
Kojto | 110:165afa46840b | 174 | #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ |
Kojto | 110:165afa46840b | 175 | #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ |
Kojto | 110:165afa46840b | 176 | #define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ |
Kojto | 110:165afa46840b | 177 | #define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ |
Kojto | 110:165afa46840b | 178 | |
Kojto | 110:165afa46840b | 179 | /* Section 2: PHY configuration section */ |
Kojto | 110:165afa46840b | 180 | |
Kojto | 110:165afa46840b | 181 | /* DP83848 PHY Address*/ |
Kojto | 110:165afa46840b | 182 | #define DP83848_PHY_ADDRESS 0x01 |
Kojto | 110:165afa46840b | 183 | /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ |
Kojto | 110:165afa46840b | 184 | #define PHY_RESET_DELAY ((uint32_t)0x000000FF) |
Kojto | 110:165afa46840b | 185 | /* PHY Configuration delay */ |
Kojto | 110:165afa46840b | 186 | #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) |
Kojto | 110:165afa46840b | 187 | |
Kojto | 110:165afa46840b | 188 | #define PHY_READ_TO ((uint32_t)0x0000FFFF) |
Kojto | 110:165afa46840b | 189 | #define PHY_WRITE_TO ((uint32_t)0x0000FFFF) |
Kojto | 110:165afa46840b | 190 | |
Kojto | 110:165afa46840b | 191 | /* Section 3: Common PHY Registers */ |
Kojto | 110:165afa46840b | 192 | |
Kojto | 110:165afa46840b | 193 | #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ |
Kojto | 110:165afa46840b | 194 | #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ |
Kojto | 110:165afa46840b | 195 | |
Kojto | 110:165afa46840b | 196 | #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ |
Kojto | 110:165afa46840b | 197 | #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ |
Kojto | 110:165afa46840b | 198 | #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ |
Kojto | 110:165afa46840b | 199 | #define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ |
Kojto | 110:165afa46840b | 200 | #define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ |
Kojto | 110:165afa46840b | 201 | #define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ |
Kojto | 110:165afa46840b | 202 | #define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ |
Kojto | 110:165afa46840b | 203 | #define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ |
Kojto | 110:165afa46840b | 204 | #define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ |
Kojto | 110:165afa46840b | 205 | #define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ |
Kojto | 110:165afa46840b | 206 | |
Kojto | 110:165afa46840b | 207 | #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ |
Kojto | 110:165afa46840b | 208 | #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ |
Kojto | 110:165afa46840b | 209 | #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ |
Kojto | 110:165afa46840b | 210 | |
Kojto | 110:165afa46840b | 211 | /* Section 4: Extended PHY Registers */ |
Kojto | 110:165afa46840b | 212 | |
Kojto | 110:165afa46840b | 213 | #define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ |
Kojto | 110:165afa46840b | 214 | #define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ |
Kojto | 110:165afa46840b | 215 | #define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ |
Kojto | 110:165afa46840b | 216 | |
Kojto | 110:165afa46840b | 217 | #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ |
Kojto | 110:165afa46840b | 218 | #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ |
Kojto | 110:165afa46840b | 219 | #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ |
Kojto | 110:165afa46840b | 220 | |
Kojto | 110:165afa46840b | 221 | #define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ |
Kojto | 110:165afa46840b | 222 | #define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ |
Kojto | 110:165afa46840b | 223 | |
Kojto | 110:165afa46840b | 224 | #define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ |
Kojto | 110:165afa46840b | 225 | #define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ |
Kojto | 110:165afa46840b | 226 | |
Kojto | 110:165afa46840b | 227 | /* Includes ------------------------------------------------------------------*/ |
Kojto | 110:165afa46840b | 228 | /** |
Kojto | 110:165afa46840b | 229 | * @brief Include module's header file |
Kojto | 110:165afa46840b | 230 | */ |
Kojto | 110:165afa46840b | 231 | |
Kojto | 110:165afa46840b | 232 | #ifdef HAL_RCC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 233 | #include "stm32f4xx_hal_rcc.h" |
Kojto | 110:165afa46840b | 234 | #endif /* HAL_RCC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 235 | |
Kojto | 110:165afa46840b | 236 | #ifdef HAL_GPIO_MODULE_ENABLED |
Kojto | 110:165afa46840b | 237 | #include "stm32f4xx_hal_gpio.h" |
Kojto | 110:165afa46840b | 238 | #endif /* HAL_GPIO_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 239 | |
Kojto | 110:165afa46840b | 240 | #ifdef HAL_DMA_MODULE_ENABLED |
Kojto | 110:165afa46840b | 241 | #include "stm32f4xx_hal_dma.h" |
Kojto | 110:165afa46840b | 242 | #endif /* HAL_DMA_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 243 | |
Kojto | 110:165afa46840b | 244 | #ifdef HAL_CORTEX_MODULE_ENABLED |
Kojto | 110:165afa46840b | 245 | #include "stm32f4xx_hal_cortex.h" |
Kojto | 110:165afa46840b | 246 | #endif /* HAL_CORTEX_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 247 | |
Kojto | 110:165afa46840b | 248 | #ifdef HAL_ADC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 249 | #include "stm32f4xx_hal_adc.h" |
Kojto | 110:165afa46840b | 250 | #endif /* HAL_ADC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 251 | |
Kojto | 110:165afa46840b | 252 | #ifdef HAL_CAN_MODULE_ENABLED |
Kojto | 110:165afa46840b | 253 | #include "stm32f4xx_hal_can.h" |
Kojto | 110:165afa46840b | 254 | #endif /* HAL_CAN_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 255 | |
Kojto | 110:165afa46840b | 256 | #ifdef HAL_CRC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 257 | #include "stm32f4xx_hal_crc.h" |
Kojto | 110:165afa46840b | 258 | #endif /* HAL_CRC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 259 | |
Kojto | 110:165afa46840b | 260 | #ifdef HAL_CRYP_MODULE_ENABLED |
Kojto | 110:165afa46840b | 261 | #include "stm32f4xx_hal_cryp.h" |
Kojto | 110:165afa46840b | 262 | #endif /* HAL_CRYP_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 263 | |
Kojto | 110:165afa46840b | 264 | #ifdef HAL_DMA2D_MODULE_ENABLED |
Kojto | 110:165afa46840b | 265 | #include "stm32f4xx_hal_dma2d.h" |
Kojto | 110:165afa46840b | 266 | #endif /* HAL_DMA2D_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 267 | |
Kojto | 110:165afa46840b | 268 | #ifdef HAL_DAC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 269 | #include "stm32f4xx_hal_dac.h" |
Kojto | 110:165afa46840b | 270 | #endif /* HAL_DAC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 271 | |
Kojto | 110:165afa46840b | 272 | #ifdef HAL_DCMI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 273 | #include "stm32f4xx_hal_dcmi.h" |
Kojto | 110:165afa46840b | 274 | #endif /* HAL_DCMI_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 275 | |
Kojto | 110:165afa46840b | 276 | #ifdef HAL_ETH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 277 | #include "stm32f4xx_hal_eth.h" |
Kojto | 110:165afa46840b | 278 | #endif /* HAL_ETH_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 279 | |
Kojto | 110:165afa46840b | 280 | #ifdef HAL_FLASH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 281 | #include "stm32f4xx_hal_flash.h" |
Kojto | 110:165afa46840b | 282 | #endif /* HAL_FLASH_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 283 | |
Kojto | 110:165afa46840b | 284 | #ifdef HAL_SRAM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 285 | #include "stm32f4xx_hal_sram.h" |
Kojto | 110:165afa46840b | 286 | #endif /* HAL_SRAM_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 287 | |
Kojto | 110:165afa46840b | 288 | #ifdef HAL_NOR_MODULE_ENABLED |
Kojto | 110:165afa46840b | 289 | #include "stm32f4xx_hal_nor.h" |
Kojto | 110:165afa46840b | 290 | #endif /* HAL_NOR_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 291 | |
Kojto | 110:165afa46840b | 292 | #ifdef HAL_NAND_MODULE_ENABLED |
Kojto | 110:165afa46840b | 293 | #include "stm32f4xx_hal_nand.h" |
Kojto | 110:165afa46840b | 294 | #endif /* HAL_NAND_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 295 | |
Kojto | 110:165afa46840b | 296 | #ifdef HAL_PCCARD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 297 | #include "stm32f4xx_hal_pccard.h" |
Kojto | 110:165afa46840b | 298 | #endif /* HAL_PCCARD_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 299 | |
Kojto | 110:165afa46840b | 300 | #ifdef HAL_SDRAM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 301 | #include "stm32f4xx_hal_sdram.h" |
Kojto | 110:165afa46840b | 302 | #endif /* HAL_SDRAM_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 303 | |
Kojto | 110:165afa46840b | 304 | #ifdef HAL_HASH_MODULE_ENABLED |
Kojto | 110:165afa46840b | 305 | #include "stm32f4xx_hal_hash.h" |
Kojto | 110:165afa46840b | 306 | #endif /* HAL_HASH_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 307 | |
Kojto | 110:165afa46840b | 308 | #ifdef HAL_I2C_MODULE_ENABLED |
Kojto | 110:165afa46840b | 309 | #include "stm32f4xx_hal_i2c.h" |
Kojto | 110:165afa46840b | 310 | #endif /* HAL_I2C_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 311 | |
Kojto | 110:165afa46840b | 312 | #ifdef HAL_I2S_MODULE_ENABLED |
Kojto | 110:165afa46840b | 313 | #include "stm32f4xx_hal_i2s.h" |
Kojto | 110:165afa46840b | 314 | #endif /* HAL_I2S_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 315 | |
Kojto | 110:165afa46840b | 316 | #ifdef HAL_IWDG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 317 | #include "stm32f4xx_hal_iwdg.h" |
Kojto | 110:165afa46840b | 318 | #endif /* HAL_IWDG_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 319 | |
Kojto | 110:165afa46840b | 320 | #ifdef HAL_LTDC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 321 | #include "stm32f4xx_hal_ltdc.h" |
Kojto | 110:165afa46840b | 322 | #endif /* HAL_LTDC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 323 | |
Kojto | 110:165afa46840b | 324 | #ifdef HAL_PWR_MODULE_ENABLED |
Kojto | 110:165afa46840b | 325 | #include "stm32f4xx_hal_pwr.h" |
Kojto | 110:165afa46840b | 326 | #endif /* HAL_PWR_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 327 | |
Kojto | 110:165afa46840b | 328 | #ifdef HAL_RNG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 329 | #include "stm32f4xx_hal_rng.h" |
Kojto | 110:165afa46840b | 330 | #endif /* HAL_RNG_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 331 | |
Kojto | 110:165afa46840b | 332 | #ifdef HAL_RTC_MODULE_ENABLED |
Kojto | 110:165afa46840b | 333 | #include "stm32f4xx_hal_rtc.h" |
Kojto | 110:165afa46840b | 334 | #endif /* HAL_RTC_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 335 | |
Kojto | 110:165afa46840b | 336 | #ifdef HAL_SAI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 337 | #include "stm32f4xx_hal_sai.h" |
Kojto | 110:165afa46840b | 338 | #endif /* HAL_SAI_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 339 | |
Kojto | 110:165afa46840b | 340 | #ifdef HAL_SD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 341 | #include "stm32f4xx_hal_sd.h" |
Kojto | 110:165afa46840b | 342 | #endif /* HAL_SD_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 343 | |
Kojto | 110:165afa46840b | 344 | #ifdef HAL_SPI_MODULE_ENABLED |
Kojto | 110:165afa46840b | 345 | #include "stm32f4xx_hal_spi.h" |
Kojto | 110:165afa46840b | 346 | #endif /* HAL_SPI_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 347 | |
Kojto | 110:165afa46840b | 348 | #ifdef HAL_TIM_MODULE_ENABLED |
Kojto | 110:165afa46840b | 349 | #include "stm32f4xx_hal_tim.h" |
Kojto | 110:165afa46840b | 350 | #endif /* HAL_TIM_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 351 | |
Kojto | 110:165afa46840b | 352 | #ifdef HAL_UART_MODULE_ENABLED |
Kojto | 110:165afa46840b | 353 | #include "stm32f4xx_hal_uart.h" |
Kojto | 110:165afa46840b | 354 | #endif /* HAL_UART_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 355 | |
Kojto | 110:165afa46840b | 356 | #ifdef HAL_USART_MODULE_ENABLED |
Kojto | 110:165afa46840b | 357 | #include "stm32f4xx_hal_usart.h" |
Kojto | 110:165afa46840b | 358 | #endif /* HAL_USART_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 359 | |
Kojto | 110:165afa46840b | 360 | #ifdef HAL_IRDA_MODULE_ENABLED |
Kojto | 110:165afa46840b | 361 | #include "stm32f4xx_hal_irda.h" |
Kojto | 110:165afa46840b | 362 | #endif /* HAL_IRDA_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 363 | |
Kojto | 110:165afa46840b | 364 | #ifdef HAL_SMARTCARD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 365 | #include "stm32f4xx_hal_smartcard.h" |
Kojto | 110:165afa46840b | 366 | #endif /* HAL_SMARTCARD_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 367 | |
Kojto | 110:165afa46840b | 368 | #ifdef HAL_WWDG_MODULE_ENABLED |
Kojto | 110:165afa46840b | 369 | #include "stm32f4xx_hal_wwdg.h" |
Kojto | 110:165afa46840b | 370 | #endif /* HAL_WWDG_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 371 | |
Kojto | 110:165afa46840b | 372 | #ifdef HAL_PCD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 373 | #include "stm32f4xx_hal_pcd.h" |
Kojto | 110:165afa46840b | 374 | #endif /* HAL_PCD_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 375 | |
Kojto | 110:165afa46840b | 376 | #ifdef HAL_HCD_MODULE_ENABLED |
Kojto | 110:165afa46840b | 377 | #include "stm32f4xx_hal_hcd.h" |
Kojto | 110:165afa46840b | 378 | #endif /* HAL_HCD_MODULE_ENABLED */ |
Kojto | 110:165afa46840b | 379 | |
Kojto | 110:165afa46840b | 380 | /* Exported macro ------------------------------------------------------------*/ |
Kojto | 110:165afa46840b | 381 | #ifdef USE_FULL_ASSERT |
Kojto | 110:165afa46840b | 382 | /** |
Kojto | 110:165afa46840b | 383 | * @brief The assert_param macro is used for function's parameters check. |
Kojto | 110:165afa46840b | 384 | * @param expr: If expr is false, it calls assert_failed function |
Kojto | 110:165afa46840b | 385 | * which reports the name of the source file and the source |
Kojto | 110:165afa46840b | 386 | * line number of the call that failed. |
Kojto | 110:165afa46840b | 387 | * If expr is true, it returns no value. |
Kojto | 110:165afa46840b | 388 | * @retval None |
Kojto | 110:165afa46840b | 389 | */ |
Kojto | 110:165afa46840b | 390 | #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) |
Kojto | 110:165afa46840b | 391 | /* Exported functions ------------------------------------------------------- */ |
Kojto | 110:165afa46840b | 392 | void assert_failed(uint8_t* file, uint32_t line); |
Kojto | 110:165afa46840b | 393 | #else |
Kojto | 110:165afa46840b | 394 | #define assert_param(expr) ((void)0) |
Kojto | 110:165afa46840b | 395 | #endif /* USE_FULL_ASSERT */ |
Kojto | 110:165afa46840b | 396 | |
Kojto | 110:165afa46840b | 397 | |
Kojto | 110:165afa46840b | 398 | |
Kojto | 110:165afa46840b | 399 | #ifdef __cplusplus |
Kojto | 110:165afa46840b | 400 | } |
Kojto | 110:165afa46840b | 401 | #endif |
Kojto | 110:165afa46840b | 402 | |
Kojto | 110:165afa46840b | 403 | #endif /* __STM32F4xx_HAL_CONF_H */ |
Kojto | 110:165afa46840b | 404 | |
Kojto | 110:165afa46840b | 405 | |
Kojto | 110:165afa46840b | 406 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |