mbed-renbed - Fork of the official mbed C/C SDK provides the …

Users » elijahorr » Code » mbed-renbed

Fork of the official mbed C/C SDK provides the software platform and libraries to build your applications for RenBED.

Dependents: 1-RenBuggyTimed RenBED_RGB RenBED_RGB_PWM RenBED_RGB

TARGET_DISCO_L476VG/stm32l4xx_hal_uart.h@107:4f6c30876dfa, 2015-09-16 (annotated)

Committer:: Kojto
Date:: Wed Sep 16 15:32:31 2015 +0100
Revision:: 107:4f6c30876dfa

Release 107  of the mbed library



Changes:

- new platforms - DISCO_F746NG, DISCO_L476VG, NUCLEO_L476RG

- KL43Z - bugfix RTC init function

- K20 - SPI mode fix

Who changed what in which revision?

User	Revision	Line number	New contents of line
Kojto	107:4f6c30876dfa	1	/**
Kojto	107:4f6c30876dfa	2	******************************************************************************
Kojto	107:4f6c30876dfa	3	* @file stm32l4xx_hal_uart.h
Kojto	107:4f6c30876dfa	4	* @author MCD Application Team
Kojto	107:4f6c30876dfa	5	* @version V1.0.0
Kojto	107:4f6c30876dfa	6	* @date 26-June-2015
Kojto	107:4f6c30876dfa	7	* @brief Header file of UART HAL module.
Kojto	107:4f6c30876dfa	8	******************************************************************************
Kojto	107:4f6c30876dfa	9	* @attention
Kojto	107:4f6c30876dfa	10	*
Kojto	107:4f6c30876dfa	11	* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
Kojto	107:4f6c30876dfa	12	*
Kojto	107:4f6c30876dfa	13	* Redistribution and use in source and binary forms, with or without modification,
Kojto	107:4f6c30876dfa	14	* are permitted provided that the following conditions are met:
Kojto	107:4f6c30876dfa	15	* 1. Redistributions of source code must retain the above copyright notice,
Kojto	107:4f6c30876dfa	16	* this list of conditions and the following disclaimer.
Kojto	107:4f6c30876dfa	17	* 2. Redistributions in binary form must reproduce the above copyright notice,
Kojto	107:4f6c30876dfa	18	* this list of conditions and the following disclaimer in the documentation
Kojto	107:4f6c30876dfa	19	* and/or other materials provided with the distribution.
Kojto	107:4f6c30876dfa	20	* 3. Neither the name of STMicroelectronics nor the names of its contributors
Kojto	107:4f6c30876dfa	21	* may be used to endorse or promote products derived from this software
Kojto	107:4f6c30876dfa	22	* without specific prior written permission.
Kojto	107:4f6c30876dfa	23	*
Kojto	107:4f6c30876dfa	24	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
Kojto	107:4f6c30876dfa	25	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
Kojto	107:4f6c30876dfa	26	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
Kojto	107:4f6c30876dfa	27	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
Kojto	107:4f6c30876dfa	28	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
Kojto	107:4f6c30876dfa	29	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
Kojto	107:4f6c30876dfa	30	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
Kojto	107:4f6c30876dfa	31	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
Kojto	107:4f6c30876dfa	32	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
Kojto	107:4f6c30876dfa	33	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Kojto	107:4f6c30876dfa	34	*
Kojto	107:4f6c30876dfa	35	******************************************************************************
Kojto	107:4f6c30876dfa	36	*/
Kojto	107:4f6c30876dfa	37
Kojto	107:4f6c30876dfa	38	/* Define to prevent recursive inclusion -------------------------------------*/
Kojto	107:4f6c30876dfa	39	#ifndef __STM32L4xx_HAL_UART_H
Kojto	107:4f6c30876dfa	40	#define __STM32L4xx_HAL_UART_H
Kojto	107:4f6c30876dfa	41
Kojto	107:4f6c30876dfa	42	#ifdef __cplusplus
Kojto	107:4f6c30876dfa	43	extern "C" {
Kojto	107:4f6c30876dfa	44	#endif
Kojto	107:4f6c30876dfa	45
Kojto	107:4f6c30876dfa	46	/* Includes ------------------------------------------------------------------*/
Kojto	107:4f6c30876dfa	47	#include "stm32l4xx_hal_def.h"
Kojto	107:4f6c30876dfa	48
Kojto	107:4f6c30876dfa	49	/** @addtogroup STM32L4xx_HAL_Driver
Kojto	107:4f6c30876dfa	50	* @{
Kojto	107:4f6c30876dfa	51	*/
Kojto	107:4f6c30876dfa	52
Kojto	107:4f6c30876dfa	53	/** @addtogroup UART
Kojto	107:4f6c30876dfa	54	* @{
Kojto	107:4f6c30876dfa	55	*/
Kojto	107:4f6c30876dfa	56
Kojto	107:4f6c30876dfa	57	/* Exported types ------------------------------------------------------------*/
Kojto	107:4f6c30876dfa	58	/** @defgroup UART_Exported_Types UART Exported Types
Kojto	107:4f6c30876dfa	59	* @{
Kojto	107:4f6c30876dfa	60	*/
Kojto	107:4f6c30876dfa	61
Kojto	107:4f6c30876dfa	62	/**
Kojto	107:4f6c30876dfa	63	* @brief UART Init Structure definition
Kojto	107:4f6c30876dfa	64	*/
Kojto	107:4f6c30876dfa	65	typedef struct
Kojto	107:4f6c30876dfa	66	{
Kojto	107:4f6c30876dfa	67	uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
Kojto	107:4f6c30876dfa	68	The baud rate register is computed using the following formula:
Kojto	107:4f6c30876dfa	69	- If oversampling is 16 or in LIN mode,
Kojto	107:4f6c30876dfa	70	Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
Kojto	107:4f6c30876dfa	71	- If oversampling is 8,
Kojto	107:4f6c30876dfa	72	- - Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
Kojto	107:4f6c30876dfa	73	- - Baud Rate Register[3] = 0
Kojto	107:4f6c30876dfa	74	- - Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
Kojto	107:4f6c30876dfa	75
Kojto	107:4f6c30876dfa	76	uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
Kojto	107:4f6c30876dfa	77	This parameter can be a value of @ref UARTEx_Word_Length. */
Kojto	107:4f6c30876dfa	78
Kojto	107:4f6c30876dfa	79	uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
Kojto	107:4f6c30876dfa	80	This parameter can be a value of @ref UART_Stop_Bits. */
Kojto	107:4f6c30876dfa	81
Kojto	107:4f6c30876dfa	82	uint32_t Parity; /*!< Specifies the parity mode.
Kojto	107:4f6c30876dfa	83	This parameter can be a value of @ref UART_Parity
Kojto	107:4f6c30876dfa	84	@note When parity is enabled, the computed parity is inserted
Kojto	107:4f6c30876dfa	85	at the MSB position of the transmitted data (9th bit when
Kojto	107:4f6c30876dfa	86	the word length is set to 9 data bits; 8th bit when the
Kojto	107:4f6c30876dfa	87	word length is set to 8 data bits). */
Kojto	107:4f6c30876dfa	88
Kojto	107:4f6c30876dfa	89	uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
Kojto	107:4f6c30876dfa	90	This parameter can be a value of @ref UART_Mode. */
Kojto	107:4f6c30876dfa	91
Kojto	107:4f6c30876dfa	92	uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
Kojto	107:4f6c30876dfa	93	or disabled.
Kojto	107:4f6c30876dfa	94	This parameter can be a value of @ref UART_Hardware_Flow_Control. */
Kojto	107:4f6c30876dfa	95
Kojto	107:4f6c30876dfa	96	uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to f_PCLK/8).
Kojto	107:4f6c30876dfa	97	This parameter can be a value of @ref UART_Over_Sampling. */
Kojto	107:4f6c30876dfa	98
Kojto	107:4f6c30876dfa	99	uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
Kojto	107:4f6c30876dfa	100	Selecting the single sample method increases the receiver tolerance to clock
Kojto	107:4f6c30876dfa	101	deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
Kojto	107:4f6c30876dfa	102	}UART_InitTypeDef;
Kojto	107:4f6c30876dfa	103
Kojto	107:4f6c30876dfa	104	/**
Kojto	107:4f6c30876dfa	105	* @brief UART Advanced Features initalization structure definition
Kojto	107:4f6c30876dfa	106	*/
Kojto	107:4f6c30876dfa	107	typedef struct
Kojto	107:4f6c30876dfa	108	{
Kojto	107:4f6c30876dfa	109	uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
Kojto	107:4f6c30876dfa	110	Advanced Features may be initialized at the same time .
Kojto	107:4f6c30876dfa	111	This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type. */
Kojto	107:4f6c30876dfa	112
Kojto	107:4f6c30876dfa	113	uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
Kojto	107:4f6c30876dfa	114	This parameter can be a value of @ref UART_Tx_Inv. */
Kojto	107:4f6c30876dfa	115
Kojto	107:4f6c30876dfa	116	uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
Kojto	107:4f6c30876dfa	117	This parameter can be a value of @ref UART_Rx_Inv. */
Kojto	107:4f6c30876dfa	118
Kojto	107:4f6c30876dfa	119	uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
Kojto	107:4f6c30876dfa	120	vs negative/inverted logic).
Kojto	107:4f6c30876dfa	121	This parameter can be a value of @ref UART_Data_Inv. */
Kojto	107:4f6c30876dfa	122
Kojto	107:4f6c30876dfa	123	uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
Kojto	107:4f6c30876dfa	124	This parameter can be a value of @ref UART_Rx_Tx_Swap. */
Kojto	107:4f6c30876dfa	125
Kojto	107:4f6c30876dfa	126	uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
Kojto	107:4f6c30876dfa	127	This parameter can be a value of @ref UART_Overrun_Disable. */
Kojto	107:4f6c30876dfa	128
Kojto	107:4f6c30876dfa	129	uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
Kojto	107:4f6c30876dfa	130	This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */
Kojto	107:4f6c30876dfa	131
Kojto	107:4f6c30876dfa	132	uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
Kojto	107:4f6c30876dfa	133	This parameter can be a value of @ref UART_AutoBaudRate_Enable */
Kojto	107:4f6c30876dfa	134
Kojto	107:4f6c30876dfa	135	uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
Kojto	107:4f6c30876dfa	136	detection is carried out.
Kojto	107:4f6c30876dfa	137	This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */
Kojto	107:4f6c30876dfa	138
Kojto	107:4f6c30876dfa	139	uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
Kojto	107:4f6c30876dfa	140	This parameter can be a value of @ref UART_MSB_First. */
Kojto	107:4f6c30876dfa	141	} UART_AdvFeatureInitTypeDef;
Kojto	107:4f6c30876dfa	142
Kojto	107:4f6c30876dfa	143
Kojto	107:4f6c30876dfa	144
Kojto	107:4f6c30876dfa	145	/**
Kojto	107:4f6c30876dfa	146	* @brief HAL UART State structures definition
Kojto	107:4f6c30876dfa	147	*/
Kojto	107:4f6c30876dfa	148	typedef enum
Kojto	107:4f6c30876dfa	149	{
Kojto	107:4f6c30876dfa	150	HAL_UART_STATE_RESET = 0x00, /!< Peripheral is not initialized /
Kojto	107:4f6c30876dfa	151	HAL_UART_STATE_READY = 0x01, /!< Peripheral Initialized and ready for use /
Kojto	107:4f6c30876dfa	152	HAL_UART_STATE_BUSY = 0x02, /!< an internal process is ongoing /
Kojto	107:4f6c30876dfa	153	HAL_UART_STATE_BUSY_TX = 0x12, /!< Data Transmission process is ongoing /
Kojto	107:4f6c30876dfa	154	HAL_UART_STATE_BUSY_RX = 0x22, /!< Data Reception process is ongoing /
Kojto	107:4f6c30876dfa	155	HAL_UART_STATE_BUSY_TX_RX = 0x32, /!< Data Transmission and Reception process is ongoing /
Kojto	107:4f6c30876dfa	156	HAL_UART_STATE_TIMEOUT = 0x03, /!< Timeout state /
Kojto	107:4f6c30876dfa	157	HAL_UART_STATE_ERROR = 0x04 /!< Error /
Kojto	107:4f6c30876dfa	158	}HAL_UART_StateTypeDef;
Kojto	107:4f6c30876dfa	159
Kojto	107:4f6c30876dfa	160	/**
Kojto	107:4f6c30876dfa	161	* @brief HAL UART Error Code structure definition
Kojto	107:4f6c30876dfa	162	*/
Kojto	107:4f6c30876dfa	163	typedef enum
Kojto	107:4f6c30876dfa	164	{
Kojto	107:4f6c30876dfa	165	HAL_UART_ERROR_NONE = 0x00, /!< No error /
Kojto	107:4f6c30876dfa	166	HAL_UART_ERROR_PE = 0x01, /!< Parity error /
Kojto	107:4f6c30876dfa	167	HAL_UART_ERROR_NE = 0x02, /!< Noise error /
Kojto	107:4f6c30876dfa	168	HAL_UART_ERROR_FE = 0x04, /!< frame error /
Kojto	107:4f6c30876dfa	169	HAL_UART_ERROR_ORE = 0x08, /!< Overrun error /
Kojto	107:4f6c30876dfa	170	HAL_UART_ERROR_DMA = 0x10 /!< DMA transfer error /
Kojto	107:4f6c30876dfa	171	}HAL_UART_ErrorTypeDef;
Kojto	107:4f6c30876dfa	172
Kojto	107:4f6c30876dfa	173	/**
Kojto	107:4f6c30876dfa	174	* @brief UART clock sources definition
Kojto	107:4f6c30876dfa	175	*/
Kojto	107:4f6c30876dfa	176	typedef enum
Kojto	107:4f6c30876dfa	177	{
Kojto	107:4f6c30876dfa	178	UART_CLOCKSOURCE_PCLK1 = 0x00, /!< PCLK1 clock source /
Kojto	107:4f6c30876dfa	179	UART_CLOCKSOURCE_PCLK2 = 0x01, /!< PCLK2 clock source /
Kojto	107:4f6c30876dfa	180	UART_CLOCKSOURCE_HSI = 0x02, /!< HSI clock source /
Kojto	107:4f6c30876dfa	181	UART_CLOCKSOURCE_SYSCLK = 0x04, /!< SYSCLK clock source /
Kojto	107:4f6c30876dfa	182	UART_CLOCKSOURCE_LSE = 0x08, /!< LSE clock source /
Kojto	107:4f6c30876dfa	183	UART_CLOCKSOURCE_UNDEFINED = 0x10 /!< Undefined clock source /
Kojto	107:4f6c30876dfa	184	}UART_ClockSourceTypeDef;
Kojto	107:4f6c30876dfa	185
Kojto	107:4f6c30876dfa	186	/**
Kojto	107:4f6c30876dfa	187	* @brief UART handle Structure definition
Kojto	107:4f6c30876dfa	188	*/
Kojto	107:4f6c30876dfa	189	typedef struct
Kojto	107:4f6c30876dfa	190	{
Kojto	107:4f6c30876dfa	191	USART_TypeDef Instance; /!< UART registers base address */
Kojto	107:4f6c30876dfa	192
Kojto	107:4f6c30876dfa	193	UART_InitTypeDef Init; /!< UART communication parameters /
Kojto	107:4f6c30876dfa	194
Kojto	107:4f6c30876dfa	195	UART_AdvFeatureInitTypeDef AdvancedInit; /!< UART Advanced Features initialization parameters /
Kojto	107:4f6c30876dfa	196
Kojto	107:4f6c30876dfa	197	uint8_t pTxBuffPtr; /!< Pointer to UART Tx transfer Buffer */
Kojto	107:4f6c30876dfa	198
Kojto	107:4f6c30876dfa	199	uint16_t TxXferSize; /!< UART Tx Transfer size /
Kojto	107:4f6c30876dfa	200
Kojto	107:4f6c30876dfa	201	uint16_t TxXferCount; /!< UART Tx Transfer Counter /
Kojto	107:4f6c30876dfa	202
Kojto	107:4f6c30876dfa	203	uint8_t pRxBuffPtr; /!< Pointer to UART Rx transfer Buffer */
Kojto	107:4f6c30876dfa	204
Kojto	107:4f6c30876dfa	205	uint16_t RxXferSize; /!< UART Rx Transfer size /
Kojto	107:4f6c30876dfa	206
Kojto	107:4f6c30876dfa	207	uint16_t RxXferCount; /!< UART Rx Transfer Counter /
Kojto	107:4f6c30876dfa	208
Kojto	107:4f6c30876dfa	209	uint16_t Mask; /!< UART Rx RDR register mask /
Kojto	107:4f6c30876dfa	210
Kojto	107:4f6c30876dfa	211	DMA_HandleTypeDef hdmatx; /!< UART Tx DMA Handle parameters */
Kojto	107:4f6c30876dfa	212
Kojto	107:4f6c30876dfa	213	DMA_HandleTypeDef hdmarx; /!< UART Rx DMA Handle parameters */
Kojto	107:4f6c30876dfa	214
Kojto	107:4f6c30876dfa	215	HAL_LockTypeDef Lock; /!< Locking object /
Kojto	107:4f6c30876dfa	216
Kojto	107:4f6c30876dfa	217	__IO HAL_UART_StateTypeDef State; /!< UART communication state /
Kojto	107:4f6c30876dfa	218
Kojto	107:4f6c30876dfa	219	__IO uint32_t ErrorCode; /!< UART Error code /
Kojto	107:4f6c30876dfa	220
Kojto	107:4f6c30876dfa	221	}UART_HandleTypeDef;
Kojto	107:4f6c30876dfa	222
Kojto	107:4f6c30876dfa	223	/**
Kojto	107:4f6c30876dfa	224	* @}
Kojto	107:4f6c30876dfa	225	*/
Kojto	107:4f6c30876dfa	226
Kojto	107:4f6c30876dfa	227	/* Exported constants --------------------------------------------------------*/
Kojto	107:4f6c30876dfa	228	/** @defgroup UART_Exported_Constants UART Exported Constants
Kojto	107:4f6c30876dfa	229	* @{
Kojto	107:4f6c30876dfa	230	*/
Kojto	107:4f6c30876dfa	231
Kojto	107:4f6c30876dfa	232	/** @defgroup UART_Stop_Bits UART Number of Stop Bits
Kojto	107:4f6c30876dfa	233	* @{
Kojto	107:4f6c30876dfa	234	*/
Kojto	107:4f6c30876dfa	235	#define UART_STOPBITS_1 ((uint32_t)0x00000000) /!< UART frame with 1 stop bit /
Kojto	107:4f6c30876dfa	236	#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 \| USART_CR2_STOP_1)) /!< UART frame with 1.5 stop bits /
Kojto	107:4f6c30876dfa	237	#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) /!< UART frame with 2 stop bits /
Kojto	107:4f6c30876dfa	238	/**
Kojto	107:4f6c30876dfa	239	* @}
Kojto	107:4f6c30876dfa	240	*/
Kojto	107:4f6c30876dfa	241
Kojto	107:4f6c30876dfa	242	/** @defgroup UART_Parity UART Parity
Kojto	107:4f6c30876dfa	243	* @{
Kojto	107:4f6c30876dfa	244	*/
Kojto	107:4f6c30876dfa	245	#define UART_PARITY_NONE ((uint32_t)0x00000000) /!< No parity /
Kojto	107:4f6c30876dfa	246	#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /!< Even parity /
Kojto	107:4f6c30876dfa	247	#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS)) /!< Odd parity /
Kojto	107:4f6c30876dfa	248	/**
Kojto	107:4f6c30876dfa	249	* @}
Kojto	107:4f6c30876dfa	250	*/
Kojto	107:4f6c30876dfa	251
Kojto	107:4f6c30876dfa	252	/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
Kojto	107:4f6c30876dfa	253	* @{
Kojto	107:4f6c30876dfa	254	*/
Kojto	107:4f6c30876dfa	255	#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) /!< No hardware control /
Kojto	107:4f6c30876dfa	256	#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) /!< Request To Send /
Kojto	107:4f6c30876dfa	257	#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) /!< Clear To Send /
Kojto	107:4f6c30876dfa	258	#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE \| USART_CR3_CTSE)) /!< Request and Clear To Send /
Kojto	107:4f6c30876dfa	259	/**
Kojto	107:4f6c30876dfa	260	* @}
Kojto	107:4f6c30876dfa	261	*/
Kojto	107:4f6c30876dfa	262
Kojto	107:4f6c30876dfa	263	/** @defgroup UART_Mode UART Transfer Mode
Kojto	107:4f6c30876dfa	264	* @{
Kojto	107:4f6c30876dfa	265	*/
Kojto	107:4f6c30876dfa	266	#define UART_MODE_RX ((uint32_t)USART_CR1_RE) /!< RX mode /
Kojto	107:4f6c30876dfa	267	#define UART_MODE_TX ((uint32_t)USART_CR1_TE) /!< TX mode /
Kojto	107:4f6c30876dfa	268	#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE)) /!< RX and TX mode /
Kojto	107:4f6c30876dfa	269	/**
Kojto	107:4f6c30876dfa	270	* @}
Kojto	107:4f6c30876dfa	271	*/
Kojto	107:4f6c30876dfa	272
Kojto	107:4f6c30876dfa	273	/** @defgroup UART_State UART State
Kojto	107:4f6c30876dfa	274	* @{
Kojto	107:4f6c30876dfa	275	*/
Kojto	107:4f6c30876dfa	276	#define UART_STATE_DISABLE ((uint32_t)0x00000000) /!< UART disabled /
Kojto	107:4f6c30876dfa	277	#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) /!< UART enabled /
Kojto	107:4f6c30876dfa	278	/**
Kojto	107:4f6c30876dfa	279	* @}
Kojto	107:4f6c30876dfa	280	*/
Kojto	107:4f6c30876dfa	281
Kojto	107:4f6c30876dfa	282	/** @defgroup UART_Over_Sampling UART Over Sampling
Kojto	107:4f6c30876dfa	283	* @{
Kojto	107:4f6c30876dfa	284	*/
Kojto	107:4f6c30876dfa	285	#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) /!< Oversampling by 16 /
Kojto	107:4f6c30876dfa	286	#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) /!< Oversampling by 8 /
Kojto	107:4f6c30876dfa	287	/**
Kojto	107:4f6c30876dfa	288	* @}
Kojto	107:4f6c30876dfa	289	*/
Kojto	107:4f6c30876dfa	290
Kojto	107:4f6c30876dfa	291	/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
Kojto	107:4f6c30876dfa	292	* @{
Kojto	107:4f6c30876dfa	293	*/
Kojto	107:4f6c30876dfa	294	#define UART_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000) /!< One-bit sampling disable /
Kojto	107:4f6c30876dfa	295	#define UART_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /!< One-bit sampling enable /
Kojto	107:4f6c30876dfa	296	/**
Kojto	107:4f6c30876dfa	297	* @}
Kojto	107:4f6c30876dfa	298	*/
Kojto	107:4f6c30876dfa	299
Kojto	107:4f6c30876dfa	300	/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
Kojto	107:4f6c30876dfa	301	* @{
Kojto	107:4f6c30876dfa	302	*/
Kojto	107:4f6c30876dfa	303	#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000) /!< Auto Baud rate detection on start bit /
Kojto	107:4f6c30876dfa	304	#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /!< Auto Baud rate detection on falling edge /
Kojto	107:4f6c30876dfa	305	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /!< Auto Baud rate detection on 0x7F frame detection /
Kojto	107:4f6c30876dfa	306	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /!< Auto Baud rate detection on 0x55 frame detection /
Kojto	107:4f6c30876dfa	307	/**
Kojto	107:4f6c30876dfa	308	* @}
Kojto	107:4f6c30876dfa	309	*/
Kojto	107:4f6c30876dfa	310
Kojto	107:4f6c30876dfa	311	/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
Kojto	107:4f6c30876dfa	312	* @{
Kojto	107:4f6c30876dfa	313	*/
Kojto	107:4f6c30876dfa	314	#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000) /!< UART receiver timeout disable /
Kojto	107:4f6c30876dfa	315	#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /!< UART receiver timeout enable /
Kojto	107:4f6c30876dfa	316	/**
Kojto	107:4f6c30876dfa	317	* @}
Kojto	107:4f6c30876dfa	318	*/
Kojto	107:4f6c30876dfa	319
Kojto	107:4f6c30876dfa	320	/** @defgroup UART_LIN UART Local Interconnection Network mode
Kojto	107:4f6c30876dfa	321	* @{
Kojto	107:4f6c30876dfa	322	*/
Kojto	107:4f6c30876dfa	323	#define UART_LIN_DISABLE ((uint32_t)0x00000000) /!< Local Interconnect Network disable /
Kojto	107:4f6c30876dfa	324	#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /!< Local Interconnect Network enable /
Kojto	107:4f6c30876dfa	325	/**
Kojto	107:4f6c30876dfa	326	* @}
Kojto	107:4f6c30876dfa	327	*/
Kojto	107:4f6c30876dfa	328
Kojto	107:4f6c30876dfa	329	/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
Kojto	107:4f6c30876dfa	330	* @{
Kojto	107:4f6c30876dfa	331	*/
Kojto	107:4f6c30876dfa	332	#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /!< LIN 10-bit break detection length /
Kojto	107:4f6c30876dfa	333	#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /!< LIN 11-bit break detection length /
Kojto	107:4f6c30876dfa	334	/**
Kojto	107:4f6c30876dfa	335	* @}
Kojto	107:4f6c30876dfa	336	*/
Kojto	107:4f6c30876dfa	337
Kojto	107:4f6c30876dfa	338	/** @defgroup UART_DMA_Tx UART DMA Tx
Kojto	107:4f6c30876dfa	339	* @{
Kojto	107:4f6c30876dfa	340	*/
Kojto	107:4f6c30876dfa	341	#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000) /!< UART DMA TX disabled /
Kojto	107:4f6c30876dfa	342	#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) /!< UART DMA TX enabled /
Kojto	107:4f6c30876dfa	343	/**
Kojto	107:4f6c30876dfa	344	* @}
Kojto	107:4f6c30876dfa	345	*/
Kojto	107:4f6c30876dfa	346
Kojto	107:4f6c30876dfa	347	/** @defgroup UART_DMA_Rx UART DMA Rx
Kojto	107:4f6c30876dfa	348	* @{
Kojto	107:4f6c30876dfa	349	*/
Kojto	107:4f6c30876dfa	350	#define UART_DMA_RX_DISABLE ((uint32_t)0x0000) /!< UART DMA RX disabled /
Kojto	107:4f6c30876dfa	351	#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) /!< UART DMA RX enabled /
Kojto	107:4f6c30876dfa	352	/**
Kojto	107:4f6c30876dfa	353	* @}
Kojto	107:4f6c30876dfa	354	*/
Kojto	107:4f6c30876dfa	355
Kojto	107:4f6c30876dfa	356	/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
Kojto	107:4f6c30876dfa	357	* @{
Kojto	107:4f6c30876dfa	358	*/
Kojto	107:4f6c30876dfa	359	#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000) /!< UART half-duplex disabled /
Kojto	107:4f6c30876dfa	360	#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL) /!< UART half-duplex enabled /
Kojto	107:4f6c30876dfa	361	/**
Kojto	107:4f6c30876dfa	362	* @}
Kojto	107:4f6c30876dfa	363	*/
Kojto	107:4f6c30876dfa	364
Kojto	107:4f6c30876dfa	365	/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
Kojto	107:4f6c30876dfa	366	* @{
Kojto	107:4f6c30876dfa	367	*/
Kojto	107:4f6c30876dfa	368	#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) /!< UART wake-up on idle line /
Kojto	107:4f6c30876dfa	369	#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) /!< UART wake-up on address mark /
Kojto	107:4f6c30876dfa	370	/**
Kojto	107:4f6c30876dfa	371	* @}
Kojto	107:4f6c30876dfa	372	*/
Kojto	107:4f6c30876dfa	373
Kojto	107:4f6c30876dfa	374	/** @defgroup UART_Request_Parameters UART Request Parameters
Kojto	107:4f6c30876dfa	375	* @{
Kojto	107:4f6c30876dfa	376	*/
Kojto	107:4f6c30876dfa	377	#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /!< Auto-Baud Rate Request /
Kojto	107:4f6c30876dfa	378	#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /!< Send Break Request /
Kojto	107:4f6c30876dfa	379	#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /!< Mute Mode Request /
Kojto	107:4f6c30876dfa	380	#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /!< Receive Data flush Request /
Kojto	107:4f6c30876dfa	381	#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /!< Transmit data flush Request /
Kojto	107:4f6c30876dfa	382	/**
Kojto	107:4f6c30876dfa	383	* @}
Kojto	107:4f6c30876dfa	384	*/
Kojto	107:4f6c30876dfa	385
Kojto	107:4f6c30876dfa	386	/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
Kojto	107:4f6c30876dfa	387	* @{
Kojto	107:4f6c30876dfa	388	*/
Kojto	107:4f6c30876dfa	389	#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) /!< No advanced feature initialization /
Kojto	107:4f6c30876dfa	390	#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) /!< TX pin active level inversion /
Kojto	107:4f6c30876dfa	391	#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) /!< RX pin active level inversion /
Kojto	107:4f6c30876dfa	392	#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) /!< Binary data inversion /
Kojto	107:4f6c30876dfa	393	#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) /!< TX/RX pins swap /
Kojto	107:4f6c30876dfa	394	#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) /!< RX overrun disable /
Kojto	107:4f6c30876dfa	395	#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) /!< DMA disable on Reception Error /
Kojto	107:4f6c30876dfa	396	#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040) /!< Auto Baud rate detection initialization /
Kojto	107:4f6c30876dfa	397	#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) /!< Most significant bit sent/received first /
Kojto	107:4f6c30876dfa	398	/**
Kojto	107:4f6c30876dfa	399	* @}
Kojto	107:4f6c30876dfa	400	*/
Kojto	107:4f6c30876dfa	401
Kojto	107:4f6c30876dfa	402	/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
Kojto	107:4f6c30876dfa	403	* @{
Kojto	107:4f6c30876dfa	404	*/
Kojto	107:4f6c30876dfa	405	#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) /!< TX pin active level inversion disable /
Kojto	107:4f6c30876dfa	406	#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /!< TX pin active level inversion enable /
Kojto	107:4f6c30876dfa	407	/**
Kojto	107:4f6c30876dfa	408	* @}
Kojto	107:4f6c30876dfa	409	*/
Kojto	107:4f6c30876dfa	410
Kojto	107:4f6c30876dfa	411	/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
Kojto	107:4f6c30876dfa	412	* @{
Kojto	107:4f6c30876dfa	413	*/
Kojto	107:4f6c30876dfa	414	#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) /!< RX pin active level inversion disable /
Kojto	107:4f6c30876dfa	415	#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /!< RX pin active level inversion enable /
Kojto	107:4f6c30876dfa	416	/**
Kojto	107:4f6c30876dfa	417	* @}
Kojto	107:4f6c30876dfa	418	*/
Kojto	107:4f6c30876dfa	419
Kojto	107:4f6c30876dfa	420	/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
Kojto	107:4f6c30876dfa	421	* @{
Kojto	107:4f6c30876dfa	422	*/
Kojto	107:4f6c30876dfa	423	#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) /!< Binary data inversion disable /
Kojto	107:4f6c30876dfa	424	#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /!< Binary data inversion enable /
Kojto	107:4f6c30876dfa	425	/**
Kojto	107:4f6c30876dfa	426	* @}
Kojto	107:4f6c30876dfa	427	*/
Kojto	107:4f6c30876dfa	428
Kojto	107:4f6c30876dfa	429	/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
Kojto	107:4f6c30876dfa	430	* @{
Kojto	107:4f6c30876dfa	431	*/
Kojto	107:4f6c30876dfa	432	#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) /!< TX/RX pins swap disable /
Kojto	107:4f6c30876dfa	433	#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /!< TX/RX pins swap enable /
Kojto	107:4f6c30876dfa	434	/**
Kojto	107:4f6c30876dfa	435	* @}
Kojto	107:4f6c30876dfa	436	*/
Kojto	107:4f6c30876dfa	437
Kojto	107:4f6c30876dfa	438	/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
Kojto	107:4f6c30876dfa	439	* @{
Kojto	107:4f6c30876dfa	440	*/
Kojto	107:4f6c30876dfa	441	#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) /!< RX overrun enable /
Kojto	107:4f6c30876dfa	442	#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /!< RX overrun disable /
Kojto	107:4f6c30876dfa	443	/**
Kojto	107:4f6c30876dfa	444	* @}
Kojto	107:4f6c30876dfa	445	*/
Kojto	107:4f6c30876dfa	446
Kojto	107:4f6c30876dfa	447	/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
Kojto	107:4f6c30876dfa	448	* @{
Kojto	107:4f6c30876dfa	449	*/
Kojto	107:4f6c30876dfa	450	#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000) /!< RX Auto Baud rate detection enable /
Kojto	107:4f6c30876dfa	451	#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN) /!< RX Auto Baud rate detection disable /
Kojto	107:4f6c30876dfa	452	/**
Kojto	107:4f6c30876dfa	453	* @}
Kojto	107:4f6c30876dfa	454	*/
Kojto	107:4f6c30876dfa	455
Kojto	107:4f6c30876dfa	456	/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
Kojto	107:4f6c30876dfa	457	* @{
Kojto	107:4f6c30876dfa	458	*/
Kojto	107:4f6c30876dfa	459	#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) /!< DMA enable on Reception Error /
Kojto	107:4f6c30876dfa	460	#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /!< DMA disable on Reception Error /
Kojto	107:4f6c30876dfa	461	/**
Kojto	107:4f6c30876dfa	462	* @}
Kojto	107:4f6c30876dfa	463	*/
Kojto	107:4f6c30876dfa	464
Kojto	107:4f6c30876dfa	465	/** @defgroup UART_MSB_First UART Advanced Feature MSB First
Kojto	107:4f6c30876dfa	466	* @{
Kojto	107:4f6c30876dfa	467	*/
Kojto	107:4f6c30876dfa	468	#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) /!< Most significant bit sent/received first disable /
Kojto	107:4f6c30876dfa	469	#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /!< Most significant bit sent/received first enable /
Kojto	107:4f6c30876dfa	470	/**
Kojto	107:4f6c30876dfa	471	* @}
Kojto	107:4f6c30876dfa	472	*/
Kojto	107:4f6c30876dfa	473
Kojto	107:4f6c30876dfa	474	/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
Kojto	107:4f6c30876dfa	475	* @{
Kojto	107:4f6c30876dfa	476	*/
Kojto	107:4f6c30876dfa	477	#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /!< UART stop mode disable /
Kojto	107:4f6c30876dfa	478	#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /!< UART stop mode enable /
Kojto	107:4f6c30876dfa	479	/**
Kojto	107:4f6c30876dfa	480	* @}
Kojto	107:4f6c30876dfa	481	*/
Kojto	107:4f6c30876dfa	482
Kojto	107:4f6c30876dfa	483	/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
Kojto	107:4f6c30876dfa	484	* @{
Kojto	107:4f6c30876dfa	485	*/
Kojto	107:4f6c30876dfa	486	#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000) /!< UART mute mode disable /
Kojto	107:4f6c30876dfa	487	#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME) /!< UART mute mode enable /
Kojto	107:4f6c30876dfa	488	/**
Kojto	107:4f6c30876dfa	489	* @}
Kojto	107:4f6c30876dfa	490	*/
Kojto	107:4f6c30876dfa	491
Kojto	107:4f6c30876dfa	492	/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
Kojto	107:4f6c30876dfa	493	* @{
Kojto	107:4f6c30876dfa	494	*/
Kojto	107:4f6c30876dfa	495	#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24) /!< UART address-matching LSB position in CR2 register /
Kojto	107:4f6c30876dfa	496	/**
Kojto	107:4f6c30876dfa	497	* @}
Kojto	107:4f6c30876dfa	498	*/
Kojto	107:4f6c30876dfa	499
Kojto	107:4f6c30876dfa	500	/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
Kojto	107:4f6c30876dfa	501	* @{
Kojto	107:4f6c30876dfa	502	*/
Kojto	107:4f6c30876dfa	503	#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /!< UART wake-up on address /
Kojto	107:4f6c30876dfa	504	#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /!< UART wake-up on start bit /
Kojto	107:4f6c30876dfa	505	#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /!< UART wake-up on receive data register not empty /
Kojto	107:4f6c30876dfa	506	/**
Kojto	107:4f6c30876dfa	507	* @}
Kojto	107:4f6c30876dfa	508	*/
Kojto	107:4f6c30876dfa	509
Kojto	107:4f6c30876dfa	510	/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
Kojto	107:4f6c30876dfa	511	* @{
Kojto	107:4f6c30876dfa	512	*/
Kojto	107:4f6c30876dfa	513	#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000) /!< Driver enable signal is active high /
Kojto	107:4f6c30876dfa	514	#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP) /!< Driver enable signal is active low /
Kojto	107:4f6c30876dfa	515	/**
Kojto	107:4f6c30876dfa	516	* @}
Kojto	107:4f6c30876dfa	517	*/
Kojto	107:4f6c30876dfa	518
Kojto	107:4f6c30876dfa	519	/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
Kojto	107:4f6c30876dfa	520	* @{
Kojto	107:4f6c30876dfa	521	*/
Kojto	107:4f6c30876dfa	522	#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21) /!< UART Driver Enable assertion time LSB position in CR1 register /
Kojto	107:4f6c30876dfa	523	/**
Kojto	107:4f6c30876dfa	524	* @}
Kojto	107:4f6c30876dfa	525	*/
Kojto	107:4f6c30876dfa	526
Kojto	107:4f6c30876dfa	527	/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
Kojto	107:4f6c30876dfa	528	* @{
Kojto	107:4f6c30876dfa	529	*/
Kojto	107:4f6c30876dfa	530	#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16) /!< UART Driver Enable de-assertion time LSB position in CR1 register /
Kojto	107:4f6c30876dfa	531	/**
Kojto	107:4f6c30876dfa	532	* @}
Kojto	107:4f6c30876dfa	533	*/
Kojto	107:4f6c30876dfa	534
Kojto	107:4f6c30876dfa	535	/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
Kojto	107:4f6c30876dfa	536	* @{
Kojto	107:4f6c30876dfa	537	*/
Kojto	107:4f6c30876dfa	538	#define UART_IT_MASK ((uint32_t)0x001F) /!< UART interruptions flags mask /
Kojto	107:4f6c30876dfa	539	/**
Kojto	107:4f6c30876dfa	540	* @}
Kojto	107:4f6c30876dfa	541	*/
Kojto	107:4f6c30876dfa	542
Kojto	107:4f6c30876dfa	543	/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
Kojto	107:4f6c30876dfa	544	* @{
Kojto	107:4f6c30876dfa	545	*/
Kojto	107:4f6c30876dfa	546	#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF /!< UART polling-based communications time-out value /
Kojto	107:4f6c30876dfa	547	/**
Kojto	107:4f6c30876dfa	548	* @}
Kojto	107:4f6c30876dfa	549	*/
Kojto	107:4f6c30876dfa	550
Kojto	107:4f6c30876dfa	551	/** @defgroup UART_Flags UART Status Flags
Kojto	107:4f6c30876dfa	552	* Elements values convention: 0xXXXX
Kojto	107:4f6c30876dfa	553	* - 0xXXXX : Flag mask in the ISR register
Kojto	107:4f6c30876dfa	554	* @{
Kojto	107:4f6c30876dfa	555	*/
Kojto	107:4f6c30876dfa	556	#define UART_FLAG_REACK ((uint32_t)0x00400000) /!< UART receive enable acknowledge flag /
Kojto	107:4f6c30876dfa	557	#define UART_FLAG_TEACK ((uint32_t)0x00200000) /!< UART transmit enable acknowledge flag /
Kojto	107:4f6c30876dfa	558	#define UART_FLAG_WUF ((uint32_t)0x00100000) /!< UART wake-up from stop mode flag /
Kojto	107:4f6c30876dfa	559	#define UART_FLAG_RWU ((uint32_t)0x00080000) /!< UART receiver wake-up from mute mode flag /
Kojto	107:4f6c30876dfa	560	#define UART_FLAG_SBKF ((uint32_t)0x00040000) /!< UART send break flag /
Kojto	107:4f6c30876dfa	561	#define UART_FLAG_CMF ((uint32_t)0x00020000) /!< UART character match flag /
Kojto	107:4f6c30876dfa	562	#define UART_FLAG_BUSY ((uint32_t)0x00010000) /!< UART busy flag /
Kojto	107:4f6c30876dfa	563	#define UART_FLAG_ABRF ((uint32_t)0x00008000) /!< UART auto Baud rate flag /
Kojto	107:4f6c30876dfa	564	#define UART_FLAG_ABRE ((uint32_t)0x00004000) /!< UART uto Baud rate error /
Kojto	107:4f6c30876dfa	565	#define UART_FLAG_EOBF ((uint32_t)0x00001000) /!< UART end of block flag /
Kojto	107:4f6c30876dfa	566	#define UART_FLAG_RTOF ((uint32_t)0x00000800) /!< UART receiver timeout flag /
Kojto	107:4f6c30876dfa	567	#define UART_FLAG_CTS ((uint32_t)0x00000400) /!< UART clear to send flag /
Kojto	107:4f6c30876dfa	568	#define UART_FLAG_CTSIF ((uint32_t)0x00000200) /!< UART clear to send interrupt flag /
Kojto	107:4f6c30876dfa	569	#define UART_FLAG_LBDF ((uint32_t)0x00000100) /!< UART LIN break detection flag /
Kojto	107:4f6c30876dfa	570	#define UART_FLAG_TXE ((uint32_t)0x00000080) /!< UART transmit data register empty /
Kojto	107:4f6c30876dfa	571	#define UART_FLAG_TC ((uint32_t)0x00000040) /!< UART transmission complete /
Kojto	107:4f6c30876dfa	572	#define UART_FLAG_RXNE ((uint32_t)0x00000020) /!< UART read data register not empty /
Kojto	107:4f6c30876dfa	573	#define UART_FLAG_IDLE ((uint32_t)0x00000010) /!< UART idle flag /
Kojto	107:4f6c30876dfa	574	#define UART_FLAG_ORE ((uint32_t)0x00000008) /!< UART overrun error /
Kojto	107:4f6c30876dfa	575	#define UART_FLAG_NE ((uint32_t)0x00000004) /!< UART noise error /
Kojto	107:4f6c30876dfa	576	#define UART_FLAG_FE ((uint32_t)0x00000002) /!< UART frame error /
Kojto	107:4f6c30876dfa	577	#define UART_FLAG_PE ((uint32_t)0x00000001) /!< UART parity error /
Kojto	107:4f6c30876dfa	578	/**
Kojto	107:4f6c30876dfa	579	* @}
Kojto	107:4f6c30876dfa	580	*/
Kojto	107:4f6c30876dfa	581
Kojto	107:4f6c30876dfa	582	/** @defgroup UART_Interrupt_definition UART Interrupts Definition
Kojto	107:4f6c30876dfa	583	* Elements values convention: 000ZZZZZ0XXYYYYYb
Kojto	107:4f6c30876dfa	584	* - YYYYY : Interrupt source position in the XX register (5bits)
Kojto	107:4f6c30876dfa	585	* - XX : Interrupt source register (2bits)
Kojto	107:4f6c30876dfa	586	* - 01: CR1 register
Kojto	107:4f6c30876dfa	587	* - 10: CR2 register
Kojto	107:4f6c30876dfa	588	* - 11: CR3 register
Kojto	107:4f6c30876dfa	589	* - ZZZZZ : Flag position in the ISR register(5bits)
Kojto	107:4f6c30876dfa	590	* @{
Kojto	107:4f6c30876dfa	591	*/
Kojto	107:4f6c30876dfa	592	#define UART_IT_PE ((uint32_t)0x0028) /!< UART parity error interruption /
Kojto	107:4f6c30876dfa	593	#define UART_IT_TXE ((uint32_t)0x0727) /!< UART transmit data register empty interruption /
Kojto	107:4f6c30876dfa	594	#define UART_IT_TC ((uint32_t)0x0626) /!< UART transmission complete interruption /
Kojto	107:4f6c30876dfa	595	#define UART_IT_RXNE ((uint32_t)0x0525) /!< UART read data register not empty interruption /
Kojto	107:4f6c30876dfa	596	#define UART_IT_IDLE ((uint32_t)0x0424) /!< UART idle interruption /
Kojto	107:4f6c30876dfa	597	#define UART_IT_LBD ((uint32_t)0x0846) /!< UART LIN break detection interruption /
Kojto	107:4f6c30876dfa	598	#define UART_IT_CTS ((uint32_t)0x096A) /!< UART CTS interruption /
Kojto	107:4f6c30876dfa	599	#define UART_IT_CM ((uint32_t)0x112E) /!< UART character match interruption /
Kojto	107:4f6c30876dfa	600	#define UART_IT_WUF ((uint32_t)0x1476) /!< UART wake-up from stop mode interruption /
Kojto	107:4f6c30876dfa	601
Kojto	107:4f6c30876dfa	602	/* Elements values convention: 000000000XXYYYYYb
Kojto	107:4f6c30876dfa	603	- YYYYY : Interrupt source position in the XX register (5bits)
Kojto	107:4f6c30876dfa	604	- XX : Interrupt source register (2bits)
Kojto	107:4f6c30876dfa	605	- 01: CR1 register
Kojto	107:4f6c30876dfa	606	- 10: CR2 register
Kojto	107:4f6c30876dfa	607	- 11: CR3 register */
Kojto	107:4f6c30876dfa	608	#define UART_IT_ERR ((uint32_t)0x0060) /!< UART error interruption /
Kojto	107:4f6c30876dfa	609
Kojto	107:4f6c30876dfa	610	/* Elements values convention: 0000ZZZZ00000000b
Kojto	107:4f6c30876dfa	611	- ZZZZ : Flag position in the ISR register(4bits) */
Kojto	107:4f6c30876dfa	612	#define UART_IT_ORE ((uint32_t)0x0300) /!< UART overrun error interruption /
Kojto	107:4f6c30876dfa	613	#define UART_IT_NE ((uint32_t)0x0200) /!< UART noise error interruption /
Kojto	107:4f6c30876dfa	614	#define UART_IT_FE ((uint32_t)0x0100) /!< UART frame error interruption /
Kojto	107:4f6c30876dfa	615	/**
Kojto	107:4f6c30876dfa	616	* @}
Kojto	107:4f6c30876dfa	617	*/
Kojto	107:4f6c30876dfa	618
Kojto	107:4f6c30876dfa	619	/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
Kojto	107:4f6c30876dfa	620	* @{
Kojto	107:4f6c30876dfa	621	*/
Kojto	107:4f6c30876dfa	622	#define UART_CLEAR_PEF USART_ICR_PECF /!< Parity Error Clear Flag /
Kojto	107:4f6c30876dfa	623	#define UART_CLEAR_FEF USART_ICR_FECF /!< Framing Error Clear Flag /
Kojto	107:4f6c30876dfa	624	#define UART_CLEAR_NEF USART_ICR_NCF /!< Noise detected Clear Flag /
Kojto	107:4f6c30876dfa	625	#define UART_CLEAR_OREF USART_ICR_ORECF /!< OverRun Error Clear Flag /
Kojto	107:4f6c30876dfa	626	#define UART_CLEAR_IDLEF USART_ICR_IDLECF /!< IDLE line detected Clear Flag /
Kojto	107:4f6c30876dfa	627	#define UART_CLEAR_TCF USART_ICR_TCCF /!< Transmission Complete Clear Flag /
Kojto	107:4f6c30876dfa	628	#define UART_CLEAR_LBDF USART_ICR_LBDCF /!< LIN Break Detection Clear Flag /
Kojto	107:4f6c30876dfa	629	#define UART_CLEAR_CTSF USART_ICR_CTSCF /!< CTS Interrupt Clear Flag /
Kojto	107:4f6c30876dfa	630	#define UART_CLEAR_RTOF USART_ICR_RTOCF /!< Receiver Time Out Clear Flag /
Kojto	107:4f6c30876dfa	631	#define UART_CLEAR_EOBF USART_ICR_EOBCF /!< End Of Block Clear Flag /
Kojto	107:4f6c30876dfa	632	#define UART_CLEAR_CMF USART_ICR_CMCF /!< Character Match Clear Flag /
Kojto	107:4f6c30876dfa	633	#define UART_CLEAR_WUF USART_ICR_WUCF /!< Wake Up from stop mode Clear Flag /
Kojto	107:4f6c30876dfa	634	/**
Kojto	107:4f6c30876dfa	635	* @}
Kojto	107:4f6c30876dfa	636	*/
Kojto	107:4f6c30876dfa	637
Kojto	107:4f6c30876dfa	638
Kojto	107:4f6c30876dfa	639	/**
Kojto	107:4f6c30876dfa	640	* @}
Kojto	107:4f6c30876dfa	641	*/
Kojto	107:4f6c30876dfa	642
Kojto	107:4f6c30876dfa	643	/* Exported macros -----------------------------------------------------------*/
Kojto	107:4f6c30876dfa	644	/** @defgroup UART_Exported_Macros UART Exported Macros
Kojto	107:4f6c30876dfa	645	* @{
Kojto	107:4f6c30876dfa	646	*/
Kojto	107:4f6c30876dfa	647
Kojto	107:4f6c30876dfa	648	/** @brief Reset UART handle state.
Kojto	107:4f6c30876dfa	649	* @param __HANDLE__: UART handle.
Kojto	107:4f6c30876dfa	650	* @retval None
Kojto	107:4f6c30876dfa	651	*/
Kojto	107:4f6c30876dfa	652	#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
Kojto	107:4f6c30876dfa	653
Kojto	107:4f6c30876dfa	654	/** @brief Flush the UART Data registers.
Kojto	107:4f6c30876dfa	655	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	656	* @retval None
Kojto	107:4f6c30876dfa	657	*/
Kojto	107:4f6c30876dfa	658	#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
Kojto	107:4f6c30876dfa	659	do{ \
Kojto	107:4f6c30876dfa	660	SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
Kojto	107:4f6c30876dfa	661	SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
Kojto	107:4f6c30876dfa	662	} while(0)
Kojto	107:4f6c30876dfa	663
Kojto	107:4f6c30876dfa	664	/** @brief Clear the specified UART pending flag.
Kojto	107:4f6c30876dfa	665	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	666	* @param __FLAG__: specifies the flag to check.
Kojto	107:4f6c30876dfa	667	* This parameter can be any combination of the following values:
Kojto	107:4f6c30876dfa	668	* @arg UART_CLEAR_PEF, Parity Error Clear Flag
Kojto	107:4f6c30876dfa	669	* @arg UART_CLEAR_FEF, Framing Error Clear Flag
Kojto	107:4f6c30876dfa	670	* @arg UART_CLEAR_NEF, Noise detected Clear Flag
Kojto	107:4f6c30876dfa	671	* @arg UART_CLEAR_OREF, OverRun Error Clear Flag
Kojto	107:4f6c30876dfa	672	* @arg UART_CLEAR_IDLEF, IDLE line detected Clear Flag
Kojto	107:4f6c30876dfa	673	* @arg UART_CLEAR_TCF, Transmission Complete Clear Flag
Kojto	107:4f6c30876dfa	674	* @arg UART_CLEAR_LBDF, LIN Break Detection Clear Flag
Kojto	107:4f6c30876dfa	675	* @arg UART_CLEAR_CTSF, CTS Interrupt Clear Flag
Kojto	107:4f6c30876dfa	676	* @arg UART_CLEAR_RTOF, Receiver Time Out Clear Flag
Kojto	107:4f6c30876dfa	677	* @arg UART_CLEAR_EOBF, End Of Block Clear Flag
Kojto	107:4f6c30876dfa	678	* @arg UART_CLEAR_CMF, Character Match Clear Flag
Kojto	107:4f6c30876dfa	679	* @arg UART_CLEAR_WUF, Wake Up from stop mode Clear Flag
Kojto	107:4f6c30876dfa	680	* @retval None
Kojto	107:4f6c30876dfa	681	*/
Kojto	107:4f6c30876dfa	682	#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
Kojto	107:4f6c30876dfa	683
Kojto	107:4f6c30876dfa	684	/** @brief Clear the UART PE pending flag.
Kojto	107:4f6c30876dfa	685	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	686	* @retval None
Kojto	107:4f6c30876dfa	687	*/
Kojto	107:4f6c30876dfa	688	#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF)
Kojto	107:4f6c30876dfa	689
Kojto	107:4f6c30876dfa	690	/** @brief Clear the UART FE pending flag.
Kojto	107:4f6c30876dfa	691	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	692	* @retval None
Kojto	107:4f6c30876dfa	693	*/
Kojto	107:4f6c30876dfa	694	#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF)
Kojto	107:4f6c30876dfa	695
Kojto	107:4f6c30876dfa	696	/** @brief Clear the UART NE pending flag.
Kojto	107:4f6c30876dfa	697	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	698	* @retval None
Kojto	107:4f6c30876dfa	699	*/
Kojto	107:4f6c30876dfa	700	#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF)
Kojto	107:4f6c30876dfa	701
Kojto	107:4f6c30876dfa	702	/** @brief Clear the UART ORE pending flag.
Kojto	107:4f6c30876dfa	703	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	704	* @retval None
Kojto	107:4f6c30876dfa	705	*/
Kojto	107:4f6c30876dfa	706	#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF)
Kojto	107:4f6c30876dfa	707
Kojto	107:4f6c30876dfa	708	/** @brief Clear the UART IDLE pending flag.
Kojto	107:4f6c30876dfa	709	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	710	* @retval None
Kojto	107:4f6c30876dfa	711	*/
Kojto	107:4f6c30876dfa	712	#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF)
Kojto	107:4f6c30876dfa	713
Kojto	107:4f6c30876dfa	714	/** @brief Check whether the specified UART flag is set or not.
Kojto	107:4f6c30876dfa	715	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	716	* @param __FLAG__: specifies the flag to check.
Kojto	107:4f6c30876dfa	717	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	718	* @arg UART_FLAG_REACK: Receive enable acknowledge flag
Kojto	107:4f6c30876dfa	719	* @arg UART_FLAG_TEACK: Transmit enable acknowledge flag
Kojto	107:4f6c30876dfa	720	* @arg UART_FLAG_WUF: Wake up from stop mode flag
Kojto	107:4f6c30876dfa	721	* @arg UART_FLAG_RWU: Receiver wake up flag (if the UART in mute mode)
Kojto	107:4f6c30876dfa	722	* @arg UART_FLAG_SBKF: Send Break flag
Kojto	107:4f6c30876dfa	723	* @arg UART_FLAG_CMF: Character match flag
Kojto	107:4f6c30876dfa	724	* @arg UART_FLAG_BUSY: Busy flag
Kojto	107:4f6c30876dfa	725	* @arg UART_FLAG_ABRF: Auto Baud rate detection flag
Kojto	107:4f6c30876dfa	726	* @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
Kojto	107:4f6c30876dfa	727	* @arg UART_FLAG_EOBF: End of block flag
Kojto	107:4f6c30876dfa	728	* @arg UART_FLAG_RTOF: Receiver timeout flag
Kojto	107:4f6c30876dfa	729	* @arg UART_FLAG_CTS: CTS Change flag
Kojto	107:4f6c30876dfa	730	* @arg UART_FLAG_LBD: LIN Break detection flag
Kojto	107:4f6c30876dfa	731	* @arg UART_FLAG_TXE: Transmit data register empty flag
Kojto	107:4f6c30876dfa	732	* @arg UART_FLAG_TC: Transmission Complete flag
Kojto	107:4f6c30876dfa	733	* @arg UART_FLAG_RXNE: Receive data register not empty flag
Kojto	107:4f6c30876dfa	734	* @arg UART_FLAG_IDLE: Idle Line detection flag
Kojto	107:4f6c30876dfa	735	* @arg UART_FLAG_ORE: OverRun Error flag
Kojto	107:4f6c30876dfa	736	* @arg UART_FLAG_NE: Noise Error flag
Kojto	107:4f6c30876dfa	737	* @arg UART_FLAG_FE: Framing Error flag
Kojto	107:4f6c30876dfa	738	* @arg UART_FLAG_PE: Parity Error flag
Kojto	107:4f6c30876dfa	739	* @retval The new state of __FLAG__ (TRUE or FALSE).
Kojto	107:4f6c30876dfa	740	*/
Kojto	107:4f6c30876dfa	741	#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
Kojto	107:4f6c30876dfa	742
Kojto	107:4f6c30876dfa	743	/** @brief Enable the specified UART interrupt.
Kojto	107:4f6c30876dfa	744	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	745	* @param __INTERRUPT__: specifies the UART interrupt source to enable.
Kojto	107:4f6c30876dfa	746	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	747	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	107:4f6c30876dfa	748	* @arg UART_IT_CM: Character match interrupt
Kojto	107:4f6c30876dfa	749	* @arg UART_IT_CTS: CTS change interrupt
Kojto	107:4f6c30876dfa	750	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	107:4f6c30876dfa	751	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	107:4f6c30876dfa	752	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	107:4f6c30876dfa	753	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	107:4f6c30876dfa	754	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	107:4f6c30876dfa	755	* @arg UART_IT_PE: Parity Error interrupt
Kojto	107:4f6c30876dfa	756	* @arg UART_IT_ERR: Error interrupt (Frame error, noise error, overrun error)
Kojto	107:4f6c30876dfa	757	* @retval None
Kojto	107:4f6c30876dfa	758	*/
Kojto	107:4f6c30876dfa	759	#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	107:4f6c30876dfa	760	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	107:4f6c30876dfa	761	((__HANDLE__)->Instance->CR3 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
Kojto	107:4f6c30876dfa	762
Kojto	107:4f6c30876dfa	763
Kojto	107:4f6c30876dfa	764	/** @brief Disable the specified UART interrupt.
Kojto	107:4f6c30876dfa	765	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	766	* @param __INTERRUPT__: specifies the UART interrupt source to disable.
Kojto	107:4f6c30876dfa	767	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	768	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	107:4f6c30876dfa	769	* @arg UART_IT_CM: Character match interrupt
Kojto	107:4f6c30876dfa	770	* @arg UART_IT_CTS: CTS change interrupt
Kojto	107:4f6c30876dfa	771	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	107:4f6c30876dfa	772	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	107:4f6c30876dfa	773	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	107:4f6c30876dfa	774	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	107:4f6c30876dfa	775	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	107:4f6c30876dfa	776	* @arg UART_IT_PE: Parity Error interrupt
Kojto	107:4f6c30876dfa	777	* @arg UART_IT_ERR: Error interrupt (Frame error, noise error, overrun error)
Kojto	107:4f6c30876dfa	778	* @retval None
Kojto	107:4f6c30876dfa	779	*/
Kojto	107:4f6c30876dfa	780	#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	107:4f6c30876dfa	781	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
Kojto	107:4f6c30876dfa	782	((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
Kojto	107:4f6c30876dfa	783
Kojto	107:4f6c30876dfa	784	/** @brief Check whether the specified UART interrupt has occurred or not.
Kojto	107:4f6c30876dfa	785	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	786	* @param __IT__: specifies the UART interrupt to check.
Kojto	107:4f6c30876dfa	787	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	788	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	107:4f6c30876dfa	789	* @arg UART_IT_CM: Character match interrupt
Kojto	107:4f6c30876dfa	790	* @arg UART_IT_CTS: CTS change interrupt
Kojto	107:4f6c30876dfa	791	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	107:4f6c30876dfa	792	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	107:4f6c30876dfa	793	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	107:4f6c30876dfa	794	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	107:4f6c30876dfa	795	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	107:4f6c30876dfa	796	* @arg UART_IT_ORE: OverRun Error interrupt
Kojto	107:4f6c30876dfa	797	* @arg UART_IT_NE: Noise Error interrupt
Kojto	107:4f6c30876dfa	798	* @arg UART_IT_FE: Framing Error interrupt
Kojto	107:4f6c30876dfa	799	* @arg UART_IT_PE: Parity Error interrupt
Kojto	107:4f6c30876dfa	800	* @retval The new state of __IT__ (TRUE or FALSE).
Kojto	107:4f6c30876dfa	801	*/
Kojto	107:4f6c30876dfa	802	#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
Kojto	107:4f6c30876dfa	803
Kojto	107:4f6c30876dfa	804	/** @brief Check whether the specified UART interrupt source is enabled or not.
Kojto	107:4f6c30876dfa	805	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	806	* @param __IT__: specifies the UART interrupt source to check.
Kojto	107:4f6c30876dfa	807	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	808	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
Kojto	107:4f6c30876dfa	809	* @arg UART_IT_CM: Character match interrupt
Kojto	107:4f6c30876dfa	810	* @arg UART_IT_CTS: CTS change interrupt
Kojto	107:4f6c30876dfa	811	* @arg UART_IT_LBD: LIN Break detection interrupt
Kojto	107:4f6c30876dfa	812	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
Kojto	107:4f6c30876dfa	813	* @arg UART_IT_TC: Transmission complete interrupt
Kojto	107:4f6c30876dfa	814	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
Kojto	107:4f6c30876dfa	815	* @arg UART_IT_IDLE: Idle line detection interrupt
Kojto	107:4f6c30876dfa	816	* @arg UART_IT_ORE: OverRun Error interrupt
Kojto	107:4f6c30876dfa	817	* @arg UART_IT_NE: Noise Error interrupt
Kojto	107:4f6c30876dfa	818	* @arg UART_IT_FE: Framing Error interrupt
Kojto	107:4f6c30876dfa	819	* @arg UART_IT_PE: Parity Error interrupt
Kojto	107:4f6c30876dfa	820	* @retval The new state of __IT__ (TRUE or FALSE).
Kojto	107:4f6c30876dfa	821	*/
Kojto	107:4f6c30876dfa	822	#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
Kojto	107:4f6c30876dfa	823	(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
Kojto	107:4f6c30876dfa	824
Kojto	107:4f6c30876dfa	825	/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag.
Kojto	107:4f6c30876dfa	826	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	827	* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
Kojto	107:4f6c30876dfa	828	* to clear the corresponding interrupt
Kojto	107:4f6c30876dfa	829	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	830	* @arg UART_CLEAR_PEF: Parity Error Clear Flag
Kojto	107:4f6c30876dfa	831	* @arg UART_CLEAR_FEF: Framing Error Clear Flag
Kojto	107:4f6c30876dfa	832	* @arg UART_CLEAR_NEF: Noise detected Clear Flag
Kojto	107:4f6c30876dfa	833	* @arg UART_CLEAR_OREF: OverRun Error Clear Flag
Kojto	107:4f6c30876dfa	834	* @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
Kojto	107:4f6c30876dfa	835	* @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
Kojto	107:4f6c30876dfa	836	* @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
Kojto	107:4f6c30876dfa	837	* @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
Kojto	107:4f6c30876dfa	838	* @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
Kojto	107:4f6c30876dfa	839	* @arg UART_CLEAR_EOBF: End Of Block Clear Flag
Kojto	107:4f6c30876dfa	840	* @arg UART_CLEAR_CMF: Character Match Clear Flag
Kojto	107:4f6c30876dfa	841	* @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
Kojto	107:4f6c30876dfa	842	* @retval None
Kojto	107:4f6c30876dfa	843	*/
Kojto	107:4f6c30876dfa	844	#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
Kojto	107:4f6c30876dfa	845
Kojto	107:4f6c30876dfa	846	/** @brief Set a specific UART request flag.
Kojto	107:4f6c30876dfa	847	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	848	* @param __REQ__: specifies the request flag to set
Kojto	107:4f6c30876dfa	849	* This parameter can be one of the following values:
Kojto	107:4f6c30876dfa	850	* @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
Kojto	107:4f6c30876dfa	851	* @arg UART_SENDBREAK_REQUEST: Send Break Request
Kojto	107:4f6c30876dfa	852	* @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
Kojto	107:4f6c30876dfa	853	* @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
Kojto	107:4f6c30876dfa	854	* @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
Kojto	107:4f6c30876dfa	855	* @retval None
Kojto	107:4f6c30876dfa	856	*/
Kojto	107:4f6c30876dfa	857	#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR \|= (uint32_t)(__REQ__))
Kojto	107:4f6c30876dfa	858
Kojto	107:4f6c30876dfa	859	/** @brief Enable the UART one bit sample method.
Kojto	107:4f6c30876dfa	860	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	861	* @retval None
Kojto	107:4f6c30876dfa	862	*/
Kojto	107:4f6c30876dfa	863	#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\|= USART_CR3_ONEBIT)
Kojto	107:4f6c30876dfa	864
Kojto	107:4f6c30876dfa	865	/** @brief Disable the UART one bit sample method.
Kojto	107:4f6c30876dfa	866	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	867	* @retval None
Kojto	107:4f6c30876dfa	868	*/
Kojto	107:4f6c30876dfa	869	#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
Kojto	107:4f6c30876dfa	870
Kojto	107:4f6c30876dfa	871	/** @brief Enable UART.
Kojto	107:4f6c30876dfa	872	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	873	* @retval None
Kojto	107:4f6c30876dfa	874	*/
Kojto	107:4f6c30876dfa	875	#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
Kojto	107:4f6c30876dfa	876
Kojto	107:4f6c30876dfa	877	/** @brief Disable UART.
Kojto	107:4f6c30876dfa	878	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	879	* @retval None
Kojto	107:4f6c30876dfa	880	*/
Kojto	107:4f6c30876dfa	881	#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
Kojto	107:4f6c30876dfa	882
Kojto	107:4f6c30876dfa	883	/** @brief Enable CTS flow control.
Kojto	107:4f6c30876dfa	884	* @note This macro allows to enable CTS hardware flow control for a given UART instance,
Kojto	107:4f6c30876dfa	885	* without need to call HAL_UART_Init() function.
Kojto	107:4f6c30876dfa	886	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
Kojto	107:4f6c30876dfa	887	* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
Kojto	107:4f6c30876dfa	888	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
Kojto	107:4f6c30876dfa	889	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
Kojto	107:4f6c30876dfa	890	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
Kojto	107:4f6c30876dfa	891	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
Kojto	107:4f6c30876dfa	892	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	893	* @retval None
Kojto	107:4f6c30876dfa	894	*/
Kojto	107:4f6c30876dfa	895	#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
Kojto	107:4f6c30876dfa	896	do{ \
Kojto	107:4f6c30876dfa	897	SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
Kojto	107:4f6c30876dfa	898	(__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_CTSE; \
Kojto	107:4f6c30876dfa	899	} while(0)
Kojto	107:4f6c30876dfa	900
Kojto	107:4f6c30876dfa	901	/** @brief Disable CTS flow control.
Kojto	107:4f6c30876dfa	902	* @note This macro allows to disable CTS hardware flow control for a given UART instance,
Kojto	107:4f6c30876dfa	903	* without need to call HAL_UART_Init() function.
Kojto	107:4f6c30876dfa	904	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
Kojto	107:4f6c30876dfa	905	* @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
Kojto	107:4f6c30876dfa	906	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
Kojto	107:4f6c30876dfa	907	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
Kojto	107:4f6c30876dfa	908	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
Kojto	107:4f6c30876dfa	909	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
Kojto	107:4f6c30876dfa	910	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	911	* @retval None
Kojto	107:4f6c30876dfa	912	*/
Kojto	107:4f6c30876dfa	913	#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
Kojto	107:4f6c30876dfa	914	do{ \
Kojto	107:4f6c30876dfa	915	CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
Kojto	107:4f6c30876dfa	916	(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
Kojto	107:4f6c30876dfa	917	} while(0)
Kojto	107:4f6c30876dfa	918
Kojto	107:4f6c30876dfa	919	/** @brief Enable RTS flow control.
Kojto	107:4f6c30876dfa	920	* @note This macro allows to enable RTS hardware flow control for a given UART instance,
Kojto	107:4f6c30876dfa	921	* without need to call HAL_UART_Init() function.
Kojto	107:4f6c30876dfa	922	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
Kojto	107:4f6c30876dfa	923	* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
Kojto	107:4f6c30876dfa	924	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
Kojto	107:4f6c30876dfa	925	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
Kojto	107:4f6c30876dfa	926	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
Kojto	107:4f6c30876dfa	927	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
Kojto	107:4f6c30876dfa	928	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	929	* @retval None
Kojto	107:4f6c30876dfa	930	*/
Kojto	107:4f6c30876dfa	931	#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
Kojto	107:4f6c30876dfa	932	do{ \
Kojto	107:4f6c30876dfa	933	SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
Kojto	107:4f6c30876dfa	934	(__HANDLE__)->Init.HwFlowCtl \|= USART_CR3_RTSE; \
Kojto	107:4f6c30876dfa	935	} while(0)
Kojto	107:4f6c30876dfa	936
Kojto	107:4f6c30876dfa	937	/** @brief Disable RTS flow control.
Kojto	107:4f6c30876dfa	938	* @note This macro allows to disable RTS hardware flow control for a given UART instance,
Kojto	107:4f6c30876dfa	939	* without need to call HAL_UART_Init() function.
Kojto	107:4f6c30876dfa	940	* As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
Kojto	107:4f6c30876dfa	941	* @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
Kojto	107:4f6c30876dfa	942	* for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
Kojto	107:4f6c30876dfa	943	* - UART instance should have already been initialised (through call of HAL_UART_Init() )
Kojto	107:4f6c30876dfa	944	* - macro could only be called when corresponding UART instance is disabled (i.e. __HAL_UART_DISABLE(__HANDLE__))
Kojto	107:4f6c30876dfa	945	* and should be followed by an Enable macro (i.e. __HAL_UART_ENABLE(__HANDLE__)).
Kojto	107:4f6c30876dfa	946	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	947	* @retval None
Kojto	107:4f6c30876dfa	948	*/
Kojto	107:4f6c30876dfa	949	#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
Kojto	107:4f6c30876dfa	950	do{ \
Kojto	107:4f6c30876dfa	951	CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
Kojto	107:4f6c30876dfa	952	(__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
Kojto	107:4f6c30876dfa	953	} while(0)
Kojto	107:4f6c30876dfa	954
Kojto	107:4f6c30876dfa	955	/**
Kojto	107:4f6c30876dfa	956	* @}
Kojto	107:4f6c30876dfa	957	*/
Kojto	107:4f6c30876dfa	958
Kojto	107:4f6c30876dfa	959	/* Private macros --------------------------------------------------------*/
Kojto	107:4f6c30876dfa	960	/** @defgroup UART_Private_Macros UART Private Macros
Kojto	107:4f6c30876dfa	961	* @{
Kojto	107:4f6c30876dfa	962	*/
Kojto	107:4f6c30876dfa	963	/** @brief BRR division operation to set BRR register with LPUART.
Kojto	107:4f6c30876dfa	964	* @param __PCLK__: LPUART clock.
Kojto	107:4f6c30876dfa	965	* @param __BAUD__: Baud rate set by the user.
Kojto	107:4f6c30876dfa	966	* @retval Division result
Kojto	107:4f6c30876dfa	967	*/
Kojto	107:4f6c30876dfa	968	#define UART_DIV_LPUART(__PCLK__, __BAUD__) (((uint64_t)(__PCLK__)*256)/((__BAUD__)))
Kojto	107:4f6c30876dfa	969
Kojto	107:4f6c30876dfa	970	/** @brief BRR division operation to set BRR register in 8-bit oversampling mode.
Kojto	107:4f6c30876dfa	971	* @param __PCLK__: UART clock.
Kojto	107:4f6c30876dfa	972	* @param __BAUD__: Baud rate set by the user.
Kojto	107:4f6c30876dfa	973	* @retval Division result
Kojto	107:4f6c30876dfa	974	*/
Kojto	107:4f6c30876dfa	975	#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__) (((__PCLK__)*2)/((__BAUD__)))
Kojto	107:4f6c30876dfa	976
Kojto	107:4f6c30876dfa	977	/** @brief BRR division operation to set BRR register in 16-bit oversampling mode.
Kojto	107:4f6c30876dfa	978	* @param __PCLK__: UART clock.
Kojto	107:4f6c30876dfa	979	* @param __BAUD__: Baud rate set by the user.
Kojto	107:4f6c30876dfa	980	* @retval Division result
Kojto	107:4f6c30876dfa	981	*/
Kojto	107:4f6c30876dfa	982	#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__) (((__PCLK__))/((__BAUD__)))
Kojto	107:4f6c30876dfa	983
Kojto	107:4f6c30876dfa	984	/** @brief Check whether or not UART instance is Low Power UART.
Kojto	107:4f6c30876dfa	985	* @param __HANDLE__: specifies the UART Handle.
Kojto	107:4f6c30876dfa	986	* @retval SET (instance is LPUART) or RESET (instance isn't LPUART)
Kojto	107:4f6c30876dfa	987	*/
Kojto	107:4f6c30876dfa	988	#define UART_INSTANCE_LOWPOWER(__HANDLE__) (((__HANDLE__)->Instance == LPUART1) ? SET : RESET )
Kojto	107:4f6c30876dfa	989
Kojto	107:4f6c30876dfa	990	/** @brief Check UART Baud rate.
Kojto	107:4f6c30876dfa	991	* @param __BAUDRATE__: Baudrate specified by the user.
Kojto	107:4f6c30876dfa	992	* The maximum Baud Rate is derived from the maximum clock on L4 (i.e. 80 MHz)
Kojto	107:4f6c30876dfa	993	* divided by the smallest oversampling used on the USART (i.e. 8)
Kojto	107:4f6c30876dfa	994	* @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid)
Kojto	107:4f6c30876dfa	995	*/
Kojto	107:4f6c30876dfa	996	#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 10000001)
Kojto	107:4f6c30876dfa	997
Kojto	107:4f6c30876dfa	998	/** @brief Check UART assertion time.
Kojto	107:4f6c30876dfa	999	* @param __TIME__: 5-bit value assertion time.
Kojto	107:4f6c30876dfa	1000	* @retval Test result (TRUE or FALSE).
Kojto	107:4f6c30876dfa	1001	*/
Kojto	107:4f6c30876dfa	1002	#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1F)
Kojto	107:4f6c30876dfa	1003
Kojto	107:4f6c30876dfa	1004	/** @brief Check UART deassertion time.
Kojto	107:4f6c30876dfa	1005	* @param __TIME__: 5-bit value deassertion time.
Kojto	107:4f6c30876dfa	1006	* @retval Test result (TRUE or FALSE).
Kojto	107:4f6c30876dfa	1007	*/
Kojto	107:4f6c30876dfa	1008	#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1F)
Kojto	107:4f6c30876dfa	1009
Kojto	107:4f6c30876dfa	1010	/**
Kojto	107:4f6c30876dfa	1011	* @brief Ensure that UART frame number of stop bits is valid.
Kojto	107:4f6c30876dfa	1012	* @param __STOPBITS__: UART frame number of stop bits.
Kojto	107:4f6c30876dfa	1013	* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
Kojto	107:4f6c30876dfa	1014	*/
Kojto	107:4f6c30876dfa	1015	#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) \|\| \
Kojto	107:4f6c30876dfa	1016	((__STOPBITS__) == UART_STOPBITS_2) \|\| \
Kojto	107:4f6c30876dfa	1017	((__STOPBITS__) == UART_STOPBITS_1_5))
Kojto	107:4f6c30876dfa	1018
Kojto	107:4f6c30876dfa	1019	/**
Kojto	107:4f6c30876dfa	1020	* @brief Ensure that UART frame parity is valid.
Kojto	107:4f6c30876dfa	1021	* @param __PARITY__: UART frame parity.
Kojto	107:4f6c30876dfa	1022	* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
Kojto	107:4f6c30876dfa	1023	*/
Kojto	107:4f6c30876dfa	1024	#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) \|\| \
Kojto	107:4f6c30876dfa	1025	((__PARITY__) == UART_PARITY_EVEN) \|\| \
Kojto	107:4f6c30876dfa	1026	((__PARITY__) == UART_PARITY_ODD))
Kojto	107:4f6c30876dfa	1027
Kojto	107:4f6c30876dfa	1028	/**
Kojto	107:4f6c30876dfa	1029	* @brief Ensure that UART hardware flow control is valid.
Kojto	107:4f6c30876dfa	1030	* @param __CONTROL__: UART hardware flow control.
Kojto	107:4f6c30876dfa	1031	* @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid)
Kojto	107:4f6c30876dfa	1032	*/
Kojto	107:4f6c30876dfa	1033	#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\
Kojto	107:4f6c30876dfa	1034	(((__CONTROL__) == UART_HWCONTROL_NONE) \|\| \
Kojto	107:4f6c30876dfa	1035	((__CONTROL__) == UART_HWCONTROL_RTS) \|\| \
Kojto	107:4f6c30876dfa	1036	((__CONTROL__) == UART_HWCONTROL_CTS) \|\| \
Kojto	107:4f6c30876dfa	1037	((__CONTROL__) == UART_HWCONTROL_RTS_CTS))
Kojto	107:4f6c30876dfa	1038
Kojto	107:4f6c30876dfa	1039	/**
Kojto	107:4f6c30876dfa	1040	* @brief Ensure that UART communication mode is valid.
Kojto	107:4f6c30876dfa	1041	* @param __MODE__: UART communication mode.
Kojto	107:4f6c30876dfa	1042	* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
Kojto	107:4f6c30876dfa	1043	*/
Kojto	107:4f6c30876dfa	1044	#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00))
Kojto	107:4f6c30876dfa	1045
Kojto	107:4f6c30876dfa	1046	/**
Kojto	107:4f6c30876dfa	1047	* @brief Ensure that UART state is valid.
Kojto	107:4f6c30876dfa	1048	* @param __STATE__: UART state.
Kojto	107:4f6c30876dfa	1049	* @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
Kojto	107:4f6c30876dfa	1050	*/
Kojto	107:4f6c30876dfa	1051	#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1052	((__STATE__) == UART_STATE_ENABLE))
Kojto	107:4f6c30876dfa	1053
Kojto	107:4f6c30876dfa	1054	/**
Kojto	107:4f6c30876dfa	1055	* @brief Ensure that UART oversampling is valid.
Kojto	107:4f6c30876dfa	1056	* @param __SAMPLING__: UART oversampling.
Kojto	107:4f6c30876dfa	1057	* @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
Kojto	107:4f6c30876dfa	1058	*/
Kojto	107:4f6c30876dfa	1059	#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) \|\| \
Kojto	107:4f6c30876dfa	1060	((__SAMPLING__) == UART_OVERSAMPLING_8))
Kojto	107:4f6c30876dfa	1061
Kojto	107:4f6c30876dfa	1062	/**
Kojto	107:4f6c30876dfa	1063	* @brief Ensure that UART frame sampling is valid.
Kojto	107:4f6c30876dfa	1064	* @param __ONEBIT__: UART frame sampling.
Kojto	107:4f6c30876dfa	1065	* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
Kojto	107:4f6c30876dfa	1066	*/
Kojto	107:4f6c30876dfa	1067	#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1068	((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE))
Kojto	107:4f6c30876dfa	1069
Kojto	107:4f6c30876dfa	1070	/**
Kojto	107:4f6c30876dfa	1071	* @brief Ensure that UART auto Baud rate detection mode is valid.
Kojto	107:4f6c30876dfa	1072	* @param __MODE__: UART auto Baud rate detection mode.
Kojto	107:4f6c30876dfa	1073	* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
Kojto	107:4f6c30876dfa	1074	*/
Kojto	107:4f6c30876dfa	1075	#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) \|\| \
Kojto	107:4f6c30876dfa	1076	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) \|\| \
Kojto	107:4f6c30876dfa	1077	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) \|\| \
Kojto	107:4f6c30876dfa	1078	((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
Kojto	107:4f6c30876dfa	1079
Kojto	107:4f6c30876dfa	1080	/**
Kojto	107:4f6c30876dfa	1081	* @brief Ensure that UART receiver timeout setting is valid.
Kojto	107:4f6c30876dfa	1082	* @param __TIMEOUT__: UART receiver timeout setting.
Kojto	107:4f6c30876dfa	1083	* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
Kojto	107:4f6c30876dfa	1084	*/
Kojto	107:4f6c30876dfa	1085	#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1086	((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE))
Kojto	107:4f6c30876dfa	1087
Kojto	107:4f6c30876dfa	1088	/**
Kojto	107:4f6c30876dfa	1089	* @brief Ensure that UART LIN state is valid.
Kojto	107:4f6c30876dfa	1090	* @param __LIN__: UART LIN state.
Kojto	107:4f6c30876dfa	1091	* @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid)
Kojto	107:4f6c30876dfa	1092	*/
Kojto	107:4f6c30876dfa	1093	#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1094	((__LIN__) == UART_LIN_ENABLE))
Kojto	107:4f6c30876dfa	1095
Kojto	107:4f6c30876dfa	1096	/**
Kojto	107:4f6c30876dfa	1097	* @brief Ensure that UART LIN break detection length is valid.
Kojto	107:4f6c30876dfa	1098	* @param __LENGTH__: UART LIN break detection length.
Kojto	107:4f6c30876dfa	1099	* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
Kojto	107:4f6c30876dfa	1100	*/
Kojto	107:4f6c30876dfa	1101	#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) \|\| \
Kojto	107:4f6c30876dfa	1102	((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B))
Kojto	107:4f6c30876dfa	1103
Kojto	107:4f6c30876dfa	1104	/**
Kojto	107:4f6c30876dfa	1105	* @brief Ensure that UART DMA TX state is valid.
Kojto	107:4f6c30876dfa	1106	* @param __DMATX__: UART DMA TX state.
Kojto	107:4f6c30876dfa	1107	* @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
Kojto	107:4f6c30876dfa	1108	*/
Kojto	107:4f6c30876dfa	1109	#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1110	((__DMATX__) == UART_DMA_TX_ENABLE))
Kojto	107:4f6c30876dfa	1111
Kojto	107:4f6c30876dfa	1112	/**
Kojto	107:4f6c30876dfa	1113	* @brief Ensure that UART DMA RX state is valid.
Kojto	107:4f6c30876dfa	1114	* @param __DMARX__: UART DMA RX state.
Kojto	107:4f6c30876dfa	1115	* @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
Kojto	107:4f6c30876dfa	1116	*/
Kojto	107:4f6c30876dfa	1117	#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1118	((__DMARX__) == UART_DMA_RX_ENABLE))
Kojto	107:4f6c30876dfa	1119
Kojto	107:4f6c30876dfa	1120	/**
Kojto	107:4f6c30876dfa	1121	* @brief Ensure that UART half-duplex state is valid.
Kojto	107:4f6c30876dfa	1122	* @param __HDSEL__: UART half-duplex state.
Kojto	107:4f6c30876dfa	1123	* @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid)
Kojto	107:4f6c30876dfa	1124	*/
Kojto	107:4f6c30876dfa	1125	#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1126	((__HDSEL__) == UART_HALF_DUPLEX_ENABLE))
Kojto	107:4f6c30876dfa	1127
Kojto	107:4f6c30876dfa	1128	/**
Kojto	107:4f6c30876dfa	1129	* @brief Ensure that UART wake-up method is valid.
Kojto	107:4f6c30876dfa	1130	* @param __WAKEUP__: UART wake-up method .
Kojto	107:4f6c30876dfa	1131	* @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid)
Kojto	107:4f6c30876dfa	1132	*/
Kojto	107:4f6c30876dfa	1133	#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) \|\| \
Kojto	107:4f6c30876dfa	1134	((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK))
Kojto	107:4f6c30876dfa	1135
Kojto	107:4f6c30876dfa	1136	/**
Kojto	107:4f6c30876dfa	1137	* @brief Ensure that UART request parameter is valid.
Kojto	107:4f6c30876dfa	1138	* @param __PARAM__: UART request parameter.
Kojto	107:4f6c30876dfa	1139	* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
Kojto	107:4f6c30876dfa	1140	*/
Kojto	107:4f6c30876dfa	1141	#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) \|\| \
Kojto	107:4f6c30876dfa	1142	((__PARAM__) == UART_SENDBREAK_REQUEST) \|\| \
Kojto	107:4f6c30876dfa	1143	((__PARAM__) == UART_MUTE_MODE_REQUEST) \|\| \
Kojto	107:4f6c30876dfa	1144	((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) \|\| \
Kojto	107:4f6c30876dfa	1145	((__PARAM__) == UART_TXDATA_FLUSH_REQUEST))
Kojto	107:4f6c30876dfa	1146
Kojto	107:4f6c30876dfa	1147	/**
Kojto	107:4f6c30876dfa	1148	* @brief Ensure that UART advanced features initialization is valid.
Kojto	107:4f6c30876dfa	1149	* @param __INIT__: UART advanced features initialization.
Kojto	107:4f6c30876dfa	1150	* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
Kojto	107:4f6c30876dfa	1151	*/
Kojto	107:4f6c30876dfa	1152	#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT \| \
Kojto	107:4f6c30876dfa	1153	UART_ADVFEATURE_TXINVERT_INIT \| \
Kojto	107:4f6c30876dfa	1154	UART_ADVFEATURE_RXINVERT_INIT \| \
Kojto	107:4f6c30876dfa	1155	UART_ADVFEATURE_DATAINVERT_INIT \| \
Kojto	107:4f6c30876dfa	1156	UART_ADVFEATURE_SWAP_INIT \| \
Kojto	107:4f6c30876dfa	1157	UART_ADVFEATURE_RXOVERRUNDISABLE_INIT \| \
Kojto	107:4f6c30876dfa	1158	UART_ADVFEATURE_DMADISABLEONERROR_INIT \| \
Kojto	107:4f6c30876dfa	1159	UART_ADVFEATURE_AUTOBAUDRATE_INIT \| \
Kojto	107:4f6c30876dfa	1160	UART_ADVFEATURE_MSBFIRST_INIT))
Kojto	107:4f6c30876dfa	1161
Kojto	107:4f6c30876dfa	1162	/**
Kojto	107:4f6c30876dfa	1163	* @brief Ensure that UART frame TX inversion setting is valid.
Kojto	107:4f6c30876dfa	1164	* @param __TXINV__: UART frame TX inversion setting.
Kojto	107:4f6c30876dfa	1165	* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
Kojto	107:4f6c30876dfa	1166	*/
Kojto	107:4f6c30876dfa	1167	#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1168	((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE))
Kojto	107:4f6c30876dfa	1169
Kojto	107:4f6c30876dfa	1170	/**
Kojto	107:4f6c30876dfa	1171	* @brief Ensure that UART frame RX inversion setting is valid.
Kojto	107:4f6c30876dfa	1172	* @param __RXINV__: UART frame RX inversion setting.
Kojto	107:4f6c30876dfa	1173	* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
Kojto	107:4f6c30876dfa	1174	*/
Kojto	107:4f6c30876dfa	1175	#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1176	((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE))
Kojto	107:4f6c30876dfa	1177
Kojto	107:4f6c30876dfa	1178	/**
Kojto	107:4f6c30876dfa	1179	* @brief Ensure that UART frame data inversion setting is valid.
Kojto	107:4f6c30876dfa	1180	* @param __DATAINV__: UART frame data inversion setting.
Kojto	107:4f6c30876dfa	1181	* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
Kojto	107:4f6c30876dfa	1182	*/
Kojto	107:4f6c30876dfa	1183	#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1184	((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE))
Kojto	107:4f6c30876dfa	1185
Kojto	107:4f6c30876dfa	1186	/**
Kojto	107:4f6c30876dfa	1187	* @brief Ensure that UART frame RX/TX pins swap setting is valid.
Kojto	107:4f6c30876dfa	1188	* @param __SWAP__: UART frame RX/TX pins swap setting.
Kojto	107:4f6c30876dfa	1189	* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
Kojto	107:4f6c30876dfa	1190	*/
Kojto	107:4f6c30876dfa	1191	#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1192	((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE))
Kojto	107:4f6c30876dfa	1193
Kojto	107:4f6c30876dfa	1194	/**
Kojto	107:4f6c30876dfa	1195	* @brief Ensure that UART frame overrun setting is valid.
Kojto	107:4f6c30876dfa	1196	* @param __OVERRUN__: UART frame overrun setting.
Kojto	107:4f6c30876dfa	1197	* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
Kojto	107:4f6c30876dfa	1198	*/
Kojto	107:4f6c30876dfa	1199	#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) \|\| \
Kojto	107:4f6c30876dfa	1200	((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE))
Kojto	107:4f6c30876dfa	1201
Kojto	107:4f6c30876dfa	1202	/**
Kojto	107:4f6c30876dfa	1203	* @brief Ensure that UART auto Baud rate state is valid.
Kojto	107:4f6c30876dfa	1204	* @param __AUTOBAUDRATE__: UART auto Baud rate state.
Kojto	107:4f6c30876dfa	1205	* @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid)
Kojto	107:4f6c30876dfa	1206	*/
Kojto	107:4f6c30876dfa	1207	#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1208	((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
Kojto	107:4f6c30876dfa	1209
Kojto	107:4f6c30876dfa	1210	/**
Kojto	107:4f6c30876dfa	1211	* @brief Ensure that UART DMA enabling or disabling on error setting is valid.
Kojto	107:4f6c30876dfa	1212	* @param __DMA__: UART DMA enabling or disabling on error setting.
Kojto	107:4f6c30876dfa	1213	* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
Kojto	107:4f6c30876dfa	1214	*/
Kojto	107:4f6c30876dfa	1215	#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) \|\| \
Kojto	107:4f6c30876dfa	1216	((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
Kojto	107:4f6c30876dfa	1217
Kojto	107:4f6c30876dfa	1218	/**
Kojto	107:4f6c30876dfa	1219	* @brief Ensure that UART frame MSB first setting is valid.
Kojto	107:4f6c30876dfa	1220	* @param __MSBFIRST__: UART frame MSB first setting.
Kojto	107:4f6c30876dfa	1221	* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
Kojto	107:4f6c30876dfa	1222	*/
Kojto	107:4f6c30876dfa	1223	#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1224	((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE))
Kojto	107:4f6c30876dfa	1225
Kojto	107:4f6c30876dfa	1226	/**
Kojto	107:4f6c30876dfa	1227	* @brief Ensure that UART stop mode state is valid.
Kojto	107:4f6c30876dfa	1228	* @param __STOPMODE__: UART stop mode state.
Kojto	107:4f6c30876dfa	1229	* @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid)
Kojto	107:4f6c30876dfa	1230	*/
Kojto	107:4f6c30876dfa	1231	#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1232	((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))
Kojto	107:4f6c30876dfa	1233
Kojto	107:4f6c30876dfa	1234	/**
Kojto	107:4f6c30876dfa	1235	* @brief Ensure that UART mute mode state is valid.
Kojto	107:4f6c30876dfa	1236	* @param __MUTE__: UART mute mode state.
Kojto	107:4f6c30876dfa	1237	* @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid)
Kojto	107:4f6c30876dfa	1238	*/
Kojto	107:4f6c30876dfa	1239	#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) \|\| \
Kojto	107:4f6c30876dfa	1240	((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE))
Kojto	107:4f6c30876dfa	1241
Kojto	107:4f6c30876dfa	1242	/**
Kojto	107:4f6c30876dfa	1243	* @brief Ensure that UART wake-up selection is valid.
Kojto	107:4f6c30876dfa	1244	* @param __WAKE__: UART wake-up selection.
Kojto	107:4f6c30876dfa	1245	* @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid)
Kojto	107:4f6c30876dfa	1246	*/
Kojto	107:4f6c30876dfa	1247	#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) \|\| \
Kojto	107:4f6c30876dfa	1248	((__WAKE__) == UART_WAKEUP_ON_STARTBIT) \|\| \
Kojto	107:4f6c30876dfa	1249	((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY))
Kojto	107:4f6c30876dfa	1250
Kojto	107:4f6c30876dfa	1251	/**
Kojto	107:4f6c30876dfa	1252	* @brief Ensure that UART driver enable polarity is valid.
Kojto	107:4f6c30876dfa	1253	* @param __POLARITY__: UART driver enable polarity.
Kojto	107:4f6c30876dfa	1254	* @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid)
Kojto	107:4f6c30876dfa	1255	*/
Kojto	107:4f6c30876dfa	1256	#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) \|\| \
Kojto	107:4f6c30876dfa	1257	((__POLARITY__) == UART_DE_POLARITY_LOW))
Kojto	107:4f6c30876dfa	1258
Kojto	107:4f6c30876dfa	1259	/**
Kojto	107:4f6c30876dfa	1260	* @brief Ensure that LPUART frame number of stop bits is valid.
Kojto	107:4f6c30876dfa	1261	* @param __STOPBITS__: LPUART frame number of stop bits.
Kojto	107:4f6c30876dfa	1262	* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
Kojto	107:4f6c30876dfa	1263	*/
Kojto	107:4f6c30876dfa	1264	#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) \|\| \
Kojto	107:4f6c30876dfa	1265	((__STOPBITS__) == UART_STOPBITS_2))
Kojto	107:4f6c30876dfa	1266
Kojto	107:4f6c30876dfa	1267	/**
Kojto	107:4f6c30876dfa	1268	* @}
Kojto	107:4f6c30876dfa	1269	*/
Kojto	107:4f6c30876dfa	1270
Kojto	107:4f6c30876dfa	1271	/* Include UART HAL Extended module */
Kojto	107:4f6c30876dfa	1272	#include "stm32l4xx_hal_uart_ex.h"
Kojto	107:4f6c30876dfa	1273
Kojto	107:4f6c30876dfa	1274	/* Exported functions --------------------------------------------------------*/
Kojto	107:4f6c30876dfa	1275	/** @addtogroup UART_Exported_Functions UART Exported Functions
Kojto	107:4f6c30876dfa	1276	* @{
Kojto	107:4f6c30876dfa	1277	*/
Kojto	107:4f6c30876dfa	1278
Kojto	107:4f6c30876dfa	1279	/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
Kojto	107:4f6c30876dfa	1280	* @{
Kojto	107:4f6c30876dfa	1281	*/
Kojto	107:4f6c30876dfa	1282
Kojto	107:4f6c30876dfa	1283	/* Initialization and de-initialization functions ****************************/
Kojto	107:4f6c30876dfa	1284	HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1285	HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1286	HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
Kojto	107:4f6c30876dfa	1287	HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
Kojto	107:4f6c30876dfa	1288	HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1289	void HAL_UART_MspInit(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1290	void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1291
Kojto	107:4f6c30876dfa	1292	/**
Kojto	107:4f6c30876dfa	1293	* @}
Kojto	107:4f6c30876dfa	1294	*/
Kojto	107:4f6c30876dfa	1295
Kojto	107:4f6c30876dfa	1296	/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
Kojto	107:4f6c30876dfa	1297	* @{
Kojto	107:4f6c30876dfa	1298	*/
Kojto	107:4f6c30876dfa	1299
Kojto	107:4f6c30876dfa	1300	/* IO operation functions *****************************************************/
Kojto	107:4f6c30876dfa	1301	HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
Kojto	107:4f6c30876dfa	1302	HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
Kojto	107:4f6c30876dfa	1303	HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	107:4f6c30876dfa	1304	HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	107:4f6c30876dfa	1305	HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	107:4f6c30876dfa	1306	HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
Kojto	107:4f6c30876dfa	1307	HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1308	HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1309	HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1310	void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1311	void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1312	void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1313	void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1314	void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1315	void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1316
Kojto	107:4f6c30876dfa	1317	/**
Kojto	107:4f6c30876dfa	1318	* @}
Kojto	107:4f6c30876dfa	1319	*/
Kojto	107:4f6c30876dfa	1320
Kojto	107:4f6c30876dfa	1321	/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
Kojto	107:4f6c30876dfa	1322	* @{
Kojto	107:4f6c30876dfa	1323	*/
Kojto	107:4f6c30876dfa	1324
Kojto	107:4f6c30876dfa	1325	/* Peripheral Control functions ************************************************/
Kojto	107:4f6c30876dfa	1326	HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1327	HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1328	HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1329	void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1330	HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1331	HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1332
Kojto	107:4f6c30876dfa	1333	/**
Kojto	107:4f6c30876dfa	1334	* @}
Kojto	107:4f6c30876dfa	1335	*/
Kojto	107:4f6c30876dfa	1336
Kojto	107:4f6c30876dfa	1337	/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
Kojto	107:4f6c30876dfa	1338	* @{
Kojto	107:4f6c30876dfa	1339	*/
Kojto	107:4f6c30876dfa	1340
Kojto	107:4f6c30876dfa	1341	/* Peripheral State and Errors functions **************************************************/
Kojto	107:4f6c30876dfa	1342	HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1343	uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1344
Kojto	107:4f6c30876dfa	1345	/**
Kojto	107:4f6c30876dfa	1346	* @}
Kojto	107:4f6c30876dfa	1347	*/
Kojto	107:4f6c30876dfa	1348
Kojto	107:4f6c30876dfa	1349	/**
Kojto	107:4f6c30876dfa	1350	* @}
Kojto	107:4f6c30876dfa	1351	*/
Kojto	107:4f6c30876dfa	1352
Kojto	107:4f6c30876dfa	1353	/* Private functions -----------------------------------------------------------*/
Kojto	107:4f6c30876dfa	1354	/** @addtogroup UART_Private_Functions UART Private Functions
Kojto	107:4f6c30876dfa	1355	* @{
Kojto	107:4f6c30876dfa	1356	*/
Kojto	107:4f6c30876dfa	1357
Kojto	107:4f6c30876dfa	1358	HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1359	HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1360	HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
Kojto	107:4f6c30876dfa	1361	void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
Kojto	107:4f6c30876dfa	1362
Kojto	107:4f6c30876dfa	1363	/**
Kojto	107:4f6c30876dfa	1364	* @}
Kojto	107:4f6c30876dfa	1365	*/
Kojto	107:4f6c30876dfa	1366
Kojto	107:4f6c30876dfa	1367	/**
Kojto	107:4f6c30876dfa	1368	* @}
Kojto	107:4f6c30876dfa	1369	*/
Kojto	107:4f6c30876dfa	1370
Kojto	107:4f6c30876dfa	1371	/**
Kojto	107:4f6c30876dfa	1372	* @}
Kojto	107:4f6c30876dfa	1373	*/
Kojto	107:4f6c30876dfa	1374
Kojto	107:4f6c30876dfa	1375	#ifdef __cplusplus
Kojto	107:4f6c30876dfa	1376	}
Kojto	107:4f6c30876dfa	1377	#endif
Kojto	107:4f6c30876dfa	1378
Kojto	107:4f6c30876dfa	1379	#endif /* __STM32L4xx_HAL_UART_H */
Kojto	107:4f6c30876dfa	1380
Kojto	107:4f6c30876dfa	1381	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	04 Apr 2016
Imports:	4
Forks:	0
Commits:	122
Dependents:	4
Dependencies:	0
Followers:	1

The code in this repository is Apache licensed.

TARGET_DISCO_L476VG/stm32l4xx_hal_uart.h@107:4f6c30876dfa, 2015-09-16 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning