Eric Tsai / Mbed 2 deprecated BLE_Gateway_Linker_fix

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   BLE_API mbed mbedtls nRF51822

Files at this revision

API Documentation at this revision

Revision 14:c62c3a92aba7, committed 2018-10-23

Comitter:
electronichamsters
Date:
Tue Oct 23 02:37:10 2018 +0000
Parent:
13:e136665cf993
Commit message:
Super lazy linker fix to mbed issue 8344. Not tested, but "it should work"

Changed in this revision

main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
--- a/main.cpp	Sun Aug 27 05:48:02 2017 +0000
+++ b/main.cpp	Tue Oct 23 02:37:10 2018 +0000
@@ -1,4 +1,10 @@
-/*  
+/* 2018-10-22:  Note, this is a temporary gateway project to fix an issue with mbed linker
+ * Original Program:  https://os.mbed.com/users/electronichamsters/code/BLE_Gateway/
+ * mbed had some linker problems raised in issue 8344
+ *    https://github.com/ARMmbed/mbed-os/issues/8344
+ * My temporary fix is to revert to a earlier revision of mbed. Devloper notes indicates
+ * this will be cleaned up on mbed's side.
+ *
  * Copyright (c) Eric Tsai 2017
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
@@ -43,7 +49,7 @@
 mbedtls_aes_context aes;
 unsigned char iv[16] = {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x1, 0x2};       //16-byte aes key
 
-
+//Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 Serial device(p9, p11);  //nRF51822 uart:  TX=p9.  RX=p11
 DigitalIn pinHandShake(p0);  //handshake uart to prevent output before bridge MCU is ready.  Flow control.
 
@@ -415,7 +421,7 @@
                 // 4.  Xmit Counter 0-255, incremented by Beacon with each new unique ADV event.
                 // "tmr":xxxx,
                 //---------------------------------------                
-                device.printf("\"xmit_cnt\":%d,", Received_Xmit_Cnt);
+                device.printf("\"xcnt\":%d,", Received_Xmit_Cnt);
                 
                 //---------------------------------------
                 // 5.  rest of sensor payload as json
@@ -430,7 +436,7 @@
     
                 device.printf("}");
                 device.printf("\r\n");  //gateway looking for cariage return to indicate end
-                wait_ms(60);  //needed to give gateway time to assert flow control handshake pin
+                wait_ms(140);  //needed to give gateway time to assert flow control handshake pin
                 while (pinHandShake.read() == 1)    //normally pulled down, so loop when gateway processing;
                 {
                     //uart flow control

--- a/mbed.bld	Sun Aug 27 05:48:02 2017 +0000
+++ b/mbed.bld	Tue Oct 23 02:37:10 2018 +0000
@@ -1,1 +1,1 @@
-https://mbed.org/users/mbed_official/code/mbed/builds/e2bfab296f20
\ No newline at end of file
+https://os.mbed.com/users/mbed_official/code/mbed/builds/abea610beb85
\ No newline at end of file