Einstein Filho
Mangue Baja Box
Diff: mbed/TARGET_NUCLEO_F103RB/stm32f10x_sdio.h
- Revision:
- 0:0dee8840a1c0
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NUCLEO_F103RB/stm32f10x_sdio.h Mon Jul 29 20:38:00 2019 +0000
@@ -0,0 +1,547 @@
+/**
+ ******************************************************************************
+ * @file stm32f10x_sdio.h
+ * @author MCD Application Team
+ * @version V3.6.1
+ * @date 05-March-2012
+ * @brief This file contains all the functions prototypes for the SDIO firmware
+ * library.
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup SDIO
+ * @{
+ */
+
+/** @defgroup SDIO_Exported_Types
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between 0x00 and 0xFF. */
+
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register */
+
+ uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+ uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+ uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+
+#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+ ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+
+#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+ ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+
+#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200)
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+ ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+
+#define SDIO_BusWide_1b ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+ ((WIDE) == SDIO_BusWide_8b))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+
+#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+ ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Power_State
+ * @{
+ */
+
+#define SDIO_PowerState_OFF ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON))
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+
+#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+
+#define SDIO_Response_No ((uint32_t)0x00000000)
+#define SDIO_Response_Short ((uint32_t)0x00000040)
+#define SDIO_Response_Long ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+ ((RESPONSE) == SDIO_Response_Short) || \
+ ((RESPONSE) == SDIO_Response_Long))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+
+#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+ ((WAIT) == SDIO_Wait_Pend))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+
+#define SDIO_CPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+
+#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+ ((SIZE) == SDIO_DataBlockSize_2b) || \
+ ((SIZE) == SDIO_DataBlockSize_4b) || \
+ ((SIZE) == SDIO_DataBlockSize_8b) || \
+ ((SIZE) == SDIO_DataBlockSize_16b) || \
+ ((SIZE) == SDIO_DataBlockSize_32b) || \
+ ((SIZE) == SDIO_DataBlockSize_64b) || \
+ ((SIZE) == SDIO_DataBlockSize_128b) || \
+ ((SIZE) == SDIO_DataBlockSize_256b) || \
+ ((SIZE) == SDIO_DataBlockSize_512b) || \
+ ((SIZE) == SDIO_DataBlockSize_1024b) || \
+ ((SIZE) == SDIO_DataBlockSize_2048b) || \
+ ((SIZE) == SDIO_DataBlockSize_4096b) || \
+ ((SIZE) == SDIO_DataBlockSize_8192b) || \
+ ((SIZE) == SDIO_DataBlockSize_16384b))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+
+#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+ ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+
+#define SDIO_TransferMode_Block ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+ ((MODE) == SDIO_TransferMode_Block))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+
+#define SDIO_DPSM_Disable ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+
+#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+
+#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+ ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Exported_Functions
+ * @{
+ */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+