kinoko john / airboot

hh

Dependencies:   FastPWM3

PositionSensor/PositionSensor.cpp@25:f5741040c4bb, 2017-04-09 (annotated)

Committer:
benkatz
Date:
Sun Apr 09 03:05:52 2017 +0000
Revision:
25:f5741040c4bb
Parent:
23:2adf23ee0305
Child:
26:2b865c00d7e9
Set current bandwidth from serial interface

Who changed what in which revision?

UserRevisionLine numberNew contents of line
benkatz 0:4e1c4df6aabd 1
benkatz 0:4e1c4df6aabd 2 #include "mbed.h"
benkatz 0:4e1c4df6aabd 3 #include "PositionSensor.h"
benkatz 22:60276ba87ac6 4 //#include "offset_lut.h"
benkatz 6:4ee1cdc43aa8 5 //#include <math.h>
benkatz 0:4e1c4df6aabd 6
benkatz 14:80ce59119d93 7 PositionSensorAM5147::PositionSensorAM5147(int CPR, float offset, int ppairs){
benkatz 14:80ce59119d93 8 //_CPR = CPR;
benkatz 14:80ce59119d93 9 _CPR = CPR;
benkatz 14:80ce59119d93 10 _ppairs = ppairs;
benkatz 22:60276ba87ac6 11 ElecOffset = offset;
benkatz 14:80ce59119d93 12 rotations = 0;
benkatz 14:80ce59119d93 13 spi = new SPI(PC_12, PC_11, PC_10);
benkatz 14:80ce59119d93 14 spi->format(16, 1);
benkatz 20:bf9ea5125d52 15 spi->frequency(5000000);
benkatz 14:80ce59119d93 16 cs = new DigitalOut(PA_15);
benkatz 14:80ce59119d93 17 cs->write(1);
benkatz 22:60276ba87ac6 18 readAngleCmd = 0xffff;
benkatz 14:80ce59119d93 19 MechOffset = 0;
benkatz 22:60276ba87ac6 20 modPosition = 0;
benkatz 22:60276ba87ac6 21 oldModPosition = 0;
benkatz 22:60276ba87ac6 22 oldVel = 0;
benkatz 22:60276ba87ac6 23 raw = 0;
benkatz 22:60276ba87ac6 24 }
benkatz 22:60276ba87ac6 25
benkatz 22:60276ba87ac6 26 void PositionSensorAM5147::Sample(){
benkatz 22:60276ba87ac6 27 cs->write(0);
benkatz 22:60276ba87ac6 28 raw = spi->write(readAngleCmd);
benkatz 25:f5741040c4bb 29 raw &= 0x3FFF; //Extract last 14 bits
benkatz 22:60276ba87ac6 30 cs->write(1);
benkatz 25:f5741040c4bb 31 int off_1 = offset_lut[raw>>7];
benkatz 25:f5741040c4bb 32 int off_2 = offset_lut[((raw>>7)+1)%128];
benkatz 25:f5741040c4bb 33 int off_interp = off_1 + ((off_2 - off_1)*(raw - ((raw>>7)<<7))>>7); // Interpolate between lookup table entries
benkatz 25:f5741040c4bb 34 int angle = raw + off_interp; // Correct for nonlinearity with lookup table from calibration
benkatz 22:60276ba87ac6 35 if(angle - old_counts > _CPR/2){
benkatz 22:60276ba87ac6 36 rotations -= 1;
benkatz 22:60276ba87ac6 37 }
benkatz 22:60276ba87ac6 38 else if (angle - old_counts < -_CPR/2){
benkatz 22:60276ba87ac6 39 rotations += 1;
benkatz 22:60276ba87ac6 40 }
benkatz 22:60276ba87ac6 41
benkatz 22:60276ba87ac6 42 old_counts = angle;
benkatz 22:60276ba87ac6 43 oldModPosition = modPosition;
benkatz 22:60276ba87ac6 44 modPosition = ((6.28318530718f * ((float) angle))/ (float)_CPR);
benkatz 22:60276ba87ac6 45 position = (6.28318530718f * ((float) angle+(_CPR*rotations)))/ (float)_CPR;
benkatz 22:60276ba87ac6 46 MechPosition = position - MechOffset;
benkatz 22:60276ba87ac6 47 float elec = ((6.28318530718f/(float)_CPR) * (float) ((_ppairs*angle)%_CPR)) - ElecOffset;
benkatz 22:60276ba87ac6 48 if(elec < 0) elec += 6.28318530718f;
benkatz 23:2adf23ee0305 49 else if(elec > 6.28318530718f) elec -= 6.28318530718f ;
benkatz 22:60276ba87ac6 50 ElecPosition = elec;
benkatz 22:60276ba87ac6 51
benkatz 22:60276ba87ac6 52 float vel;
benkatz 22:60276ba87ac6 53 if(modPosition<.1f && oldModPosition>6.1f){
benkatz 22:60276ba87ac6 54 vel = (modPosition - oldModPosition + 6.28318530718f)*40000.0f;
benkatz 22:60276ba87ac6 55 }
benkatz 22:60276ba87ac6 56 else if(modPosition>6.1f && oldModPosition<0.1f){
benkatz 22:60276ba87ac6 57 vel = (modPosition - oldModPosition - 6.28318530718f)*40000.0f;
benkatz 22:60276ba87ac6 58 }
benkatz 22:60276ba87ac6 59 else{
benkatz 22:60276ba87ac6 60 vel = (modPosition-oldModPosition)*40000.0f;
benkatz 22:60276ba87ac6 61 }
benkatz 22:60276ba87ac6 62
benkatz 22:60276ba87ac6 63 int n = 16;
benkatz 22:60276ba87ac6 64 float sum = vel;
benkatz 22:60276ba87ac6 65 for (int i = 1; i < (n); i++){
benkatz 22:60276ba87ac6 66 velVec[n - i] = velVec[n-i-1];
benkatz 22:60276ba87ac6 67 sum += velVec[n-i];
benkatz 22:60276ba87ac6 68 }
benkatz 22:60276ba87ac6 69 velVec[0] = vel;
benkatz 22:60276ba87ac6 70 MechVelocity = sum/(float)n;
benkatz 22:60276ba87ac6 71 ElecVelocity = MechVelocity*_ppairs;
benkatz 14:80ce59119d93 72 }
benkatz 8:10ae7bc88d6e 73
benkatz 14:80ce59119d93 74 int PositionSensorAM5147::GetRawPosition(){
benkatz 22:60276ba87ac6 75 return raw;
benkatz 14:80ce59119d93 76 }
benkatz 14:80ce59119d93 77
benkatz 14:80ce59119d93 78 float PositionSensorAM5147::GetMechPosition(){
benkatz 14:80ce59119d93 79 return MechPosition;
benkatz 14:80ce59119d93 80 }
benkatz 14:80ce59119d93 81
benkatz 14:80ce59119d93 82 float PositionSensorAM5147::GetElecPosition(){
benkatz 22:60276ba87ac6 83 return ElecPosition;
benkatz 14:80ce59119d93 84 }
benkatz 14:80ce59119d93 85
benkatz 14:80ce59119d93 86 float PositionSensorAM5147::GetMechVelocity(){
benkatz 22:60276ba87ac6 87 return MechVelocity;
benkatz 14:80ce59119d93 88 }
benkatz 14:80ce59119d93 89
benkatz 14:80ce59119d93 90 void PositionSensorAM5147::ZeroPosition(){
benkatz 14:80ce59119d93 91 rotations = 0;
benkatz 14:80ce59119d93 92 MechOffset = GetMechPosition();
benkatz 14:80ce59119d93 93 }
benkatz 0:4e1c4df6aabd 94
benkatz 22:60276ba87ac6 95 void PositionSensorAM5147::SetElecOffset(float offset){
benkatz 22:60276ba87ac6 96 ElecOffset = offset;
benkatz 22:60276ba87ac6 97 }
benkatz 22:60276ba87ac6 98
benkatz 22:60276ba87ac6 99 int PositionSensorAM5147::GetCPR(){
benkatz 22:60276ba87ac6 100 return _CPR;
benkatz 22:60276ba87ac6 101 }
benkatz 22:60276ba87ac6 102
benkatz 22:60276ba87ac6 103
benkatz 22:60276ba87ac6 104 void PositionSensorAM5147::WriteLUT(int new_lut[128]){
benkatz 22:60276ba87ac6 105 memcpy(offset_lut, new_lut, sizeof(offset_lut));
benkatz 22:60276ba87ac6 106 }
benkatz 20:bf9ea5125d52 107
benkatz 22:60276ba87ac6 108
benkatz 10:370851e6e132 109 PositionSensorEncoder::PositionSensorEncoder(int CPR, float offset, int ppairs) {
benkatz 10:370851e6e132 110 _ppairs = ppairs;
benkatz 0:4e1c4df6aabd 111 _CPR = CPR;
benkatz 0:4e1c4df6aabd 112 _offset = offset;
benkatz 3:6a0015d88d06 113 MechPosition = 0;
benkatz 22:60276ba87ac6 114 out_old = 0;
benkatz 22:60276ba87ac6 115 oldVel = 0;
benkatz 22:60276ba87ac6 116 raw = 0;
benkatz 0:4e1c4df6aabd 117
benkatz 0:4e1c4df6aabd 118 // Enable clock for GPIOA
benkatz 0:4e1c4df6aabd 119 __GPIOA_CLK_ENABLE(); //equivalent from hal_rcc.h
benkatz 0:4e1c4df6aabd 120
benkatz 0:4e1c4df6aabd 121 GPIOA->MODER |= GPIO_MODER_MODER6_1 | GPIO_MODER_MODER7_1 ; //PA6 & PA7 as Alternate Function /*!< GPIO port mode register, Address offset: 0x00 */
benkatz 0:4e1c4df6aabd 122 GPIOA->OTYPER |= GPIO_OTYPER_OT_6 | GPIO_OTYPER_OT_7 ; //PA6 & PA7 as Inputs /*!< GPIO port output type register, Address offset: 0x04 */
benkatz 0:4e1c4df6aabd 123 GPIOA->OSPEEDR |= GPIO_OSPEEDER_OSPEEDR6 | GPIO_OSPEEDER_OSPEEDR7 ; //Low speed /*!< GPIO port output speed register, Address offset: 0x08 */
benkatz 0:4e1c4df6aabd 124 GPIOA->PUPDR |= GPIO_PUPDR_PUPDR6_1 | GPIO_PUPDR_PUPDR7_1 ; //Pull Down /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
benkatz 0:4e1c4df6aabd 125 GPIOA->AFR[0] |= 0x22000000 ; //AF02 for PA6 & PA7 /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
benkatz 0:4e1c4df6aabd 126 GPIOA->AFR[1] |= 0x00000000 ; //nibbles here refer to gpio8..15 /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
benkatz 0:4e1c4df6aabd 127
benkatz 0:4e1c4df6aabd 128 // configure TIM3 as Encoder input
benkatz 0:4e1c4df6aabd 129 // Enable clock for TIM3
benkatz 0:4e1c4df6aabd 130 __TIM3_CLK_ENABLE();
benkatz 0:4e1c4df6aabd 131
benkatz 22:60276ba87ac6 132 TIM3->CR1 = 0x0001; // CEN(Counter ENable)='1' < TIM control register 1
benkatz 22:60276ba87ac6 133 TIM3->SMCR = TIM_ENCODERMODE_TI12; // SMS='011' (Encoder mode 3) < TIM slave mode control register
benkatz 22:60276ba87ac6 134 TIM3->CCMR1 = 0x1111; // CC1S='01' CC2S='01' < TIM capture/compare mode register 1, maximum digital filtering
benkatz 22:60276ba87ac6 135 TIM3->CCMR2 = 0x0000; // < TIM capture/compare mode register 2
benkatz 22:60276ba87ac6 136 TIM3->CCER = 0x0011; // CC1P CC2P < TIM capture/compare enable register
benkatz 22:60276ba87ac6 137 TIM3->PSC = 0x0000; // Prescaler = (0+1) < TIM prescaler
benkatz 22:60276ba87ac6 138 TIM3->ARR = CPR; // IM auto-reload register
benkatz 0:4e1c4df6aabd 139
benkatz 7:dc5f27756e02 140 TIM3->CNT = 0x000; //reset the counter before we use it
benkatz 0:4e1c4df6aabd 141
benkatz 3:6a0015d88d06 142 // Extra Timer for velocity measurement
benkatz 9:d7eb815cb057 143
benkatz 3:6a0015d88d06 144 __TIM2_CLK_ENABLE();
benkatz 22:60276ba87ac6 145 TIM3->CR2 = 0x030; //MMS = 101
benkatz 3:6a0015d88d06 146
benkatz 3:6a0015d88d06 147 TIM2->PSC = 0x03;
benkatz 3:6a0015d88d06 148 //TIM2->CR2 |= TIM_CR2_TI1S;
benkatz 22:60276ba87ac6 149 TIM2->SMCR = 0x24; //TS = 010 for ITR2, SMS = 100 (reset counter at edge)
benkatz 22:60276ba87ac6 150 TIM2->CCMR1 = 0x3; // CC1S = 11, IC1 mapped on TRC
benkatz 3:6a0015d88d06 151
benkatz 3:6a0015d88d06 152 //TIM2->CR2 |= TIM_CR2_TI1S;
benkatz 3:6a0015d88d06 153 TIM2->CCER |= TIM_CCER_CC1P;
benkatz 3:6a0015d88d06 154 //TIM2->CCER |= TIM_CCER_CC1NP;
benkatz 3:6a0015d88d06 155 TIM2->CCER |= TIM_CCER_CC1E;
benkatz 3:6a0015d88d06 156
benkatz 3:6a0015d88d06 157
benkatz 22:60276ba87ac6 158 TIM2->CR1 = 0x01; //CEN, enable timer
benkatz 9:d7eb815cb057 159
benkatz 22:60276ba87ac6 160 TIM3->CR1 = 0x01; // CEN
benkatz 8:10ae7bc88d6e 161 ZPulse = new InterruptIn(PC_4);
benkatz 8:10ae7bc88d6e 162 ZSense = new DigitalIn(PC_4);
benkatz 8:10ae7bc88d6e 163 //ZPulse = new InterruptIn(PB_0);
benkatz 8:10ae7bc88d6e 164 //ZSense = new DigitalIn(PB_0);
benkatz 0:4e1c4df6aabd 165 ZPulse->enable_irq();
benkatz 0:4e1c4df6aabd 166 ZPulse->rise(this, &PositionSensorEncoder::ZeroEncoderCount);
benkatz 7:dc5f27756e02 167 //ZPulse->fall(this, &PositionSensorEncoder::ZeroEncoderCountDown);
benkatz 0:4e1c4df6aabd 168 ZPulse->mode(PullDown);
benkatz 7:dc5f27756e02 169 flag = 0;
benkatz 0:4e1c4df6aabd 170
benkatz 0:4e1c4df6aabd 171
benkatz 1:b8bceb4daed5 172 //ZTest = new DigitalOut(PC_2);
benkatz 1:b8bceb4daed5 173 //ZTest->write(1);
benkatz 22:60276ba87ac6 174 }
benkatz 0:4e1c4df6aabd 175
benkatz 22:60276ba87ac6 176 void PositionSensorEncoder::Sample(){
benkatz 0:4e1c4df6aabd 177
benkatz 22:60276ba87ac6 178 }
benkatz 22:60276ba87ac6 179
benkatz 0:4e1c4df6aabd 180
benkatz 22:60276ba87ac6 181 float PositionSensorEncoder::GetMechPosition() { //returns rotor angle in radians.
benkatz 8:10ae7bc88d6e 182 int raw = TIM3->CNT;
benkatz 7:dc5f27756e02 183 float unsigned_mech = (6.28318530718f/(float)_CPR) * (float) ((raw)%_CPR);
benkatz 7:dc5f27756e02 184 return (float) unsigned_mech;// + 6.28318530718f* (float) rotations;
benkatz 0:4e1c4df6aabd 185 }
benkatz 0:4e1c4df6aabd 186
benkatz 22:60276ba87ac6 187 float PositionSensorEncoder::GetElecPosition() { //returns rotor electrical angle in radians.
benkatz 7:dc5f27756e02 188 int raw = TIM3->CNT;
benkatz 10:370851e6e132 189 float elec = ((6.28318530718f/(float)_CPR) * (float) ((_ppairs*raw)%_CPR)) - _offset;
benkatz 8:10ae7bc88d6e 190 if(elec < 0) elec += 6.28318530718f;
benkatz 8:10ae7bc88d6e 191 return elec;
benkatz 0:4e1c4df6aabd 192 }
benkatz 0:4e1c4df6aabd 193
benkatz 13:a3fa0a31b114 194
benkatz 3:6a0015d88d06 195
benkatz 3:6a0015d88d06 196 float PositionSensorEncoder::GetMechVelocity(){
benkatz 22:60276ba87ac6 197
benkatz 9:d7eb815cb057 198 float out = 0;
benkatz 3:6a0015d88d06 199 float rawPeriod = TIM2->CCR1; //Clock Ticks
benkatz 22:60276ba87ac6 200 int currentTime = TIM2->CNT;
benkatz 22:60276ba87ac6 201 if(currentTime > 2000000){rawPeriod = currentTime;}
benkatz 3:6a0015d88d06 202 float dir = -2.0f*(float)(((TIM3->CR1)>>4)&1)+1.0f; // +/- 1
benkatz 22:60276ba87ac6 203 float meas = dir*180000000.0f*(6.28318530718f/(float)_CPR)/rawPeriod;
benkatz 22:60276ba87ac6 204 if(isinf(meas)){ meas = 1;}
benkatz 11:c83b18d41e54 205 out = meas;
benkatz 22:60276ba87ac6 206 //if(meas == oldVel){
benkatz 22:60276ba87ac6 207 // out = .9f*out_old;
benkatz 22:60276ba87ac6 208 // }
benkatz 22:60276ba87ac6 209
benkatz 22:60276ba87ac6 210
benkatz 22:60276ba87ac6 211 oldVel = meas;
benkatz 22:60276ba87ac6 212 out_old = out;
benkatz 22:60276ba87ac6 213 int n = 16;
benkatz 22:60276ba87ac6 214 float sum = out;
benkatz 22:60276ba87ac6 215 for (int i = 1; i < (n); i++){
benkatz 22:60276ba87ac6 216 velVec[n - i] = velVec[n-i-1];
benkatz 22:60276ba87ac6 217 sum += velVec[n-i];
benkatz 9:d7eb815cb057 218 }
benkatz 22:60276ba87ac6 219 velVec[0] = out;
benkatz 22:60276ba87ac6 220 return sum/(float)n;
benkatz 3:6a0015d88d06 221 }
benkatz 13:a3fa0a31b114 222
benkatz 13:a3fa0a31b114 223 float PositionSensorEncoder::GetElecVelocity(){
benkatz 13:a3fa0a31b114 224 return _ppairs*GetMechVelocity();
benkatz 13:a3fa0a31b114 225 }
benkatz 13:a3fa0a31b114 226
benkatz 0:4e1c4df6aabd 227 void PositionSensorEncoder::ZeroEncoderCount(void){
benkatz 7:dc5f27756e02 228 if (ZSense->read() == 1 & flag == 0){
benkatz 0:4e1c4df6aabd 229 if (ZSense->read() == 1){
benkatz 8:10ae7bc88d6e 230 GPIOC->ODR ^= (1 << 4);
benkatz 7:dc5f27756e02 231 TIM3->CNT = 0x000;
benkatz 1:b8bceb4daed5 232 //state = !state;
benkatz 1:b8bceb4daed5 233 //ZTest->write(state);
benkatz 7:dc5f27756e02 234 GPIOC->ODR ^= (1 << 4);
benkatz 7:dc5f27756e02 235 //flag = 1;
benkatz 7:dc5f27756e02 236 }
benkatz 7:dc5f27756e02 237 }
benkatz 7:dc5f27756e02 238 }
benkatz 22:60276ba87ac6 239
benkatz 22:60276ba87ac6 240 void PositionSensorEncoder::ZeroPosition(void){
benkatz 22:60276ba87ac6 241
benkatz 22:60276ba87ac6 242 }
benkatz 7:dc5f27756e02 243
benkatz 7:dc5f27756e02 244 void PositionSensorEncoder::ZeroEncoderCountDown(void){
benkatz 7:dc5f27756e02 245 if (ZSense->read() == 0){
benkatz 7:dc5f27756e02 246 if (ZSense->read() == 0){
benkatz 7:dc5f27756e02 247 GPIOC->ODR ^= (1 << 4);
benkatz 7:dc5f27756e02 248 flag = 0;
benkatz 7:dc5f27756e02 249 float dir = -2.0f*(float)(((TIM3->CR1)>>4)&1)+1.0f;
benkatz 7:dc5f27756e02 250 if(dir != dir){
benkatz 7:dc5f27756e02 251 dir = dir;
benkatz 7:dc5f27756e02 252 rotations += dir;
benkatz 7:dc5f27756e02 253 }
benkatz 7:dc5f27756e02 254
benkatz 7:dc5f27756e02 255 GPIOC->ODR ^= (1 << 4);
benkatz 7:dc5f27756e02 256
benkatz 0:4e1c4df6aabd 257 }
benkatz 0:4e1c4df6aabd 258 }
benkatz 22:60276ba87ac6 259 }
benkatz 22:60276ba87ac6 260 void PositionSensorEncoder::SetElecOffset(float offset){
benkatz 22:60276ba87ac6 261
benkatz 22:60276ba87ac6 262 }
benkatz 22:60276ba87ac6 263
benkatz 22:60276ba87ac6 264 int PositionSensorEncoder::GetRawPosition(void){
benkatz 22:60276ba87ac6 265 return 0;
benkatz 22:60276ba87ac6 266 }
benkatz 22:60276ba87ac6 267
benkatz 22:60276ba87ac6 268 int PositionSensorEncoder::GetCPR(){
benkatz 22:60276ba87ac6 269 return _CPR;
benkatz 22:60276ba87ac6 270 }
benkatz 22:60276ba87ac6 271
benkatz 22:60276ba87ac6 272
benkatz 22:60276ba87ac6 273 void PositionSensorEncoder::WriteLUT(int new_lut[128]){
benkatz 22:60276ba87ac6 274 memcpy(offset_lut, new_lut, sizeof(offset_lut));
benkatz 22:60276ba87ac6 275 }