Diff: shields/TARGET_ST_BLUENRG/x-nucleo-idb0xa1/bluenrg-hci/ble_status.h

Revision:

0:29983394c6b6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/shields/TARGET_ST_BLUENRG/x-nucleo-idb0xa1/bluenrg-hci/ble_status.h	Thu Apr 13 04:48:11 2017 +0000
@@ -0,0 +1,115 @@
+/******************** (C) COPYRIGHT 2012 STMicroelectronics ********************
+* File Name          : ble_status.h
+* Author             : AMS - HEA&RF BU
+* Version            : V1.0.0
+* Date               : 19-July-2012
+* Description        : Header file with BLE Stack status codes.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+#ifndef __BLE_STATUS_H__
+#define __BLE_STATUS_H__
+
+#include <ble_hal_types.h>
+
+
+/** @defgroup ble_status Bluetooth Status/Error Codes
+ * @{
+ */
+ 
+typedef uint8_t tBleStatus; 
+
+/* Error Codes as specified by the specification 
+ * according to the spec the error codes range
+ * from 0x00 to 0x3F 
+ */
+#define ERR_CMD_SUCCESS         	                (0x00)
+#define BLE_STATUS_SUCCESS            		        (0x00)
+#define ERR_UNKNOWN_HCI_COMMAND	                    (0x01)
+#define ERR_UNKNOWN_CONN_IDENTIFIER	                (0x02)
+
+#define ERR_AUTH_FAILURE                            (0x05)
+#define ERR_PIN_OR_KEY_MISSING                      (0x06)
+#define ERR_MEM_CAPACITY_EXCEEDED                   (0x07)
+#define ERR_CONNECTION_TIMEOUT                      (0x08)
+
+#define ERR_COMMAND_DISALLOWED				        (0x0C)
+
+#define ERR_UNSUPPORTED_FEATURE				        (0x11)
+#define ERR_INVALID_HCI_CMD_PARAMS                  (0x12)
+#define ERR_RMT_USR_TERM_CONN                       (0x13)
+#define ERR_RMT_DEV_TERM_CONN_LOW_RESRCES           (0x14)
+#define ERR_RMT_DEV_TERM_CONN_POWER_OFF             (0x15)
+#define ERR_LOCAL_HOST_TERM_CONN                    (0x16)
+
+#define ERR_UNSUPP_RMT_FEATURE                      (0x1A)
+
+#define ERR_INVALID_LMP_PARAM                       (0x1E)
+#define ERR_UNSPECIFIED_ERROR                       (0x1F)
+
+#define ERR_LL_RESP_TIMEOUT                         (0x22)
+#define ERR_LMP_PDU_NOT_ALLOWED                     (0x24)
+
+#define ERR_INSTANT_PASSED                          (0x28)
+
+#define ERR_PAIR_UNIT_KEY_NOT_SUPP                  (0x29)
+#define ERR_CONTROLLER_BUSY                         (0x3A)
+
+#define ERR_DIRECTED_ADV_TIMEOUT                    (0x3C)
+
+#define ERR_CONN_END_WITH_MIC_FAILURE               (0x3D)
+
+#define ERR_CONN_FAILED_TO_ESTABLISH                (0x3E)
+
+
+#define BLE_STATUS_FAILED             		(0x41)
+#define BLE_STATUS_INVALID_PARAMS     		(0x42)
+#define BLE_STATUS_BUSY               		(0x43)
+#define BLE_STATUS_INVALID_LEN_PDU    		(0x44)
+#define BLE_STATUS_PENDING            		(0x45)
+#define BLE_STATUS_NOT_ALLOWED        		(0x46)
+#define BLE_STATUS_ERROR              		(0x47)
+#define BLE_STATUS_ADDR_NOT_RESOLVED        (0x48)
+
+#define FLASH_READ_FAILED 					(0x49)
+#define FLASH_WRITE_FAILED 					(0x4A)
+#define FLASH_ERASE_FAILED 					(0x4B)
+
+#define BLE_STATUS_INVALID_CID         		(0x50)
+
+#define TIMER_NOT_VALID_LAYER				(0x54)
+#define TIMER_INSUFFICIENT_RESOURCES		(0x55)
+ 
+#define BLE_STATUS_CSRK_NOT_FOUND			(0x5A)
+#define BLE_STATUS_IRK_NOT_FOUND			(0x5B)
+#define BLE_STATUS_DEV_NOT_FOUND_IN_DB		(0x5C)
+#define BLE_STATUS_SEC_DB_FULL				(0x5D)
+#define BLE_STATUS_DEV_NOT_BONDED           (0x5E)
+#define BLE_STATUS_DEV_IN_BLACKLIST         (0x5F)
+ 
+#define BLE_STATUS_INVALID_HANDLE           (0x60)
+#define BLE_STATUS_INVALID_PARAMETER        (0x61)
+#define BLE_STATUS_OUT_OF_HANDLE            (0x62)
+#define BLE_STATUS_INVALID_OPERATION        (0x63)
+#define BLE_STATUS_INSUFFICIENT_RESOURCES   (0x64)
+#define BLE_INSUFFICIENT_ENC_KEYSIZE		(0x65)
+#define BLE_STATUS_CHARAC_ALREADY_EXISTS    (0x66)
+
+ /*
+  * Library Error Codes
+  */
+#define BLE_STATUS_TIMEOUT                     (0xFF)
+#define BLE_STATUS_PROFILE_ALREADY_INITIALIZED (0xF0)
+#define BLE_STATUS_NULL_PARAM                  (0xF1) 
+
+/**
+ * @}
+ */
+ 
+
+#endif /* __BLE_STATUS_H__ */