mbed library sources
Dependents: FRDM-KL46Z_LCD_Test FRDM-KL46Z_LCD_Test FRDM-KL46Z_Plantilla FRDM-KL46Z_Plantilla ... more
Diff: targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c
- Revision:
- 0:6bc4ac881c8e
diff -r 000000000000 -r 6bc4ac881c8e targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c Thu Jul 28 15:56:34 2016 +0000 @@ -0,0 +1,206 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include <stddef.h> +#include "cmsis.h" + +#include "gpio_irq_api.h" +#include "pinmap.h" +#include "mbed_error.h" + +#define EDGE_NONE (0) +#define EDGE_RISE (1) +#define EDGE_FALL (2) +#define EDGE_BOTH (3) + +#define CHANNEL_NUM (3) + +static uint32_t channel_ids[CHANNEL_NUM] = {0, 0, 0}; +static uint32_t channel_gpio[CHANNEL_NUM] = {0, 0, 0}; +static uint32_t channel_pin[CHANNEL_NUM] = {0, 0, 0}; + +static gpio_irq_handler irq_handler; + +static void handle_interrupt_in(uint32_t irq_index) { + // Retrieve the gpio and pin that generate the irq + GPIO_TypeDef *gpio = (GPIO_TypeDef *)(channel_gpio[irq_index]); + uint32_t pin = (uint32_t)(1 << channel_pin[irq_index]); + + // Clear interrupt flag + if (EXTI_GetITStatus(pin) != RESET) { + EXTI_ClearITPendingBit(pin); + } + + if (channel_ids[irq_index] == 0) return; + + // Check which edge has generated the irq + if ((gpio->IDR & pin) == 0) { + irq_handler(channel_ids[irq_index], IRQ_FALL); + } else { + irq_handler(channel_ids[irq_index], IRQ_RISE); + } +} + +// The irq_index is passed to the function +static void gpio_irq0(void) { + handle_interrupt_in(0); +} +static void gpio_irq1(void) { + handle_interrupt_in(1); +} +static void gpio_irq2(void) { + handle_interrupt_in(2); +} + +extern uint32_t Set_GPIO_Clock(uint32_t port_idx); + +int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { + IRQn_Type irq_n = (IRQn_Type)0; + uint32_t vector = 0; + uint32_t irq_index; + + if (pin == NC) return -1; + + uint32_t port_index = STM_PORT(pin); + uint32_t pin_index = STM_PIN(pin); + + // Select irq number and interrupt routine + if ((pin_index == 0) || (pin_index == 1)) { + irq_n = EXTI0_1_IRQn; + vector = (uint32_t)&gpio_irq0; + irq_index = 0; + } else if ((pin_index == 2) || (pin_index == 3)) { + irq_n = EXTI2_3_IRQn; + vector = (uint32_t)&gpio_irq1; + irq_index = 1; + } else if ((pin_index > 3) && (pin_index < 16)) { + irq_n = EXTI4_15_IRQn; + vector = (uint32_t)&gpio_irq2; + irq_index = 2; + } else { + error("InterruptIn error: pin not supported.\n"); + return -1; + } + + // Enable GPIO clock + uint32_t gpio_add = Set_GPIO_Clock(port_index); + + // Enable SYSCFG clock + RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); + + // Connect EXTI line to pin + SYSCFG_EXTILineConfig(port_index, pin_index); + + // Configure EXTI line + EXTI_InitTypeDef EXTI_InitStructure; + EXTI_InitStructure.EXTI_Line = (uint32_t)(1 << pin_index); + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); + + // Enable and set EXTI interrupt to the lowest priority + NVIC_InitTypeDef NVIC_InitStructure; + NVIC_InitStructure.NVIC_IRQChannel = irq_n; + NVIC_InitStructure.NVIC_IRQChannelPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); + + // Save informations for future use + obj->irq_n = irq_n; + obj->irq_index = irq_index; + obj->event = EDGE_NONE; + channel_ids[irq_index] = id; + channel_gpio[irq_index] = gpio_add; + channel_pin[irq_index] = pin_index; + + irq_handler = handler; + + return 0; +} + +void gpio_irq_free(gpio_irq_t *obj) { + channel_ids[obj->irq_index] = 0; + channel_gpio[obj->irq_index] = 0; + channel_pin[obj->irq_index] = 0; + // Disable EXTI line + EXTI_InitTypeDef EXTI_InitStructure; + EXTI_StructInit(&EXTI_InitStructure); + EXTI_Init(&EXTI_InitStructure); + obj->event = EDGE_NONE; +} + +void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { + EXTI_InitTypeDef EXTI_InitStructure; + + uint32_t pin_index = channel_pin[obj->irq_index]; + + EXTI_InitStructure.EXTI_Line = (uint32_t)(1 << pin_index); + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; + + if (event == IRQ_RISE) { + if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) { + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; + obj->event = EDGE_BOTH; + } else { // NONE or RISE + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; + obj->event = EDGE_RISE; + } + } + + if (event == IRQ_FALL) { + if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) { + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; + obj->event = EDGE_BOTH; + } else { // NONE or FALL + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; + obj->event = EDGE_FALL; + } + } + + if (enable) { + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + } else { + EXTI_InitStructure.EXTI_LineCmd = DISABLE; + } + + EXTI_Init(&EXTI_InitStructure); +} + +void gpio_irq_enable(gpio_irq_t *obj) { + NVIC_EnableIRQ(obj->irq_n); +} + +void gpio_irq_disable(gpio_irq_t *obj) { + NVIC_DisableIRQ(obj->irq_n); + obj->event = EDGE_NONE; +}