Test the set param mode
Diff: Calibration/calibration.cpp
- Revision:
- 44:8040fa2fcb0d
- Parent:
- 38:67e4e1453a4b
- Child:
- 45:26801179208e
diff -r dfb72608639c -r 8040fa2fcb0d Calibration/calibration.cpp --- a/Calibration/calibration.cpp Fri May 25 16:10:46 2018 +0000 +++ b/Calibration/calibration.cpp Mon Jun 11 00:04:06 2018 +0000 @@ -6,6 +6,8 @@ #include "foc.h" #include "PreferenceWriter.h" #include "user_config.h" +#include "motor_config.h" +#include "current_controller_config.h" void order_phases(PositionSensor *ps, GPIOStruct *gpio, ControllerStruct *controller, PreferenceWriter *prefs){ @@ -14,10 +16,10 @@ printf("\n\r Checking phase ordering\n\r"); float theta_ref = 0; float theta_actual = 0; - float v_d = .25; //Put all volts on the D-Axis - float v_q = 0.0; + float v_d = .15f; //Put all volts on the D-Axis + float v_q = 0.0f; float v_u, v_v, v_w = 0; - float dtc_u, dtc_v, dtc_w = .5; + float dtc_u, dtc_v, dtc_w = .5f; int sample_counter = 0; ///Set voltage angle to zero, wait for rotor position to settle @@ -86,10 +88,10 @@ int raw_b[n] = {0}; float theta_ref = 0; float theta_actual = 0; - float v_d = .25; // Put volts on the D-Axis - float v_q = 0.0; + float v_d = .15f; // Put volts on the D-Axis + float v_q = 0.0f; float v_u, v_v, v_w = 0; - float dtc_u, dtc_v, dtc_w = .5; + float dtc_u, dtc_v, dtc_w = .5f; ///Set voltage angle to zero, wait for rotor position to settle