File content as of revision 0:d46a1b9267a3:

#include "mbed.h"


#define SX9500_REG_IRQSRC                           0x00
#define SX9500_REG_STAT                             0x01
#define SX9500_REG_IRQMSK                           0x03
#define SX9500_REG_PROXCTRL0                        0x06
#define SX9500_REG_PROXCTRL1                        0x07
#define SX9500_REG_PROXCTRL2                        0x08
#define SX9500_REG_PROXCTRL3                        0x09
#define SX9500_REG_PROXCTRL4                        0x0A
#define SX9500_REG_PROXCTRL5                        0x0B
#define SX9500_REG_PROXCTRL6                        0x0C
#define SX9500_REG_PROXCTRL7                        0x0D
#define SX9500_REG_PROXCTRL8                        0x0E
#define SX9500_REG_SENSORSEL                        0x20
#define SX9500_REG_USEMSB                           0x21
#define SX9500_REG_USELSB                           0x22
#define SX9500_REG_AVGMSB                           0x23
#define SX9500_REG_AVGLSB                           0x24
#define SX9500_REG_DIFFMSB                          0x25
#define SX9500_REG_DIFFLSB                          0x26
#define SX9500_REG_OFFSETMSB                        0x27
#define SX9500_REG_OFFSETLSB                        0x28
#define SX9500_REG_RESET                            0x7F

#define SX9500_RESET_CMD                            0xDE

class SX9500 {
    public:
        SX9500(I2C& r, PinName en_pin);
        ~SX9500();
        //void try_read(void);
        uint8_t read_single(uint8_t addr);
        void read(uint8_t addr, uint8_t *dst_buf, int length);
        void write(uint8_t addr, uint8_t data);
        void reset(void);
        uint16_t get_sensor(void);
        void standby(void);
        
    private:
        I2C& m_i2c;
        DigitalOut m_txen;
};