Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Diff: Protocols/PAR16.h
- Revision:
- 4:12ba0ecc2c1f
- Child:
- 5:b222a9461d6b
diff -r 48f3282c2be8 -r 12ba0ecc2c1f Protocols/PAR16.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Protocols/PAR16.h Sun Feb 15 20:06:07 2015 +0000 @@ -0,0 +1,97 @@ +#ifndef PAR16_H +#define PAR16_H + +#include "mbed.h" +#include "Protocols.h" +//#include "GraphicsDisplay.h" + +class PAR16 : public Protocols +{ + public: + + /** Create a PAR16 display interface with a GPIO port and 5 control pins + * + * @param port GPIO port to use + * @param CS pin connected to CS of display + * @param reset pin connected to RESET of display + * @param DC pin connected to data/command of display + * @param WR pin connected to SDI of display + * @param RD pin connected to RS of display + */ + PAR16(PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD); + +protected: + + /** Send 8bit command to display controller + * + * @param cmd: byte to send + * + */ + virtual void wr_cmd8(unsigned char cmd); + + /** Send 8bit data to display controller + * + * @param data: byte to send + * + */ + virtual void wr_data8(unsigned char data); + + /** Send 2x8bit command to display controller + * + * @param cmd: halfword to send + * @note 2cycles using pins[7:0] + */ + virtual void wr_cmd16(unsigned short cmd); + + /** Send 2x8bit data to display controller + * + * @param data: halfword to send + * @note 2cycles using pins[7:0], only gram write cmd uses pins[15:8] + */ + virtual void wr_data16(unsigned short data); + + /** Send 16bit pixeldata to display controller + * + * @param data: halfword to send + * @note here using all pins[15:0] + */ + virtual void wr_gram(unsigned short data); + + /** Send same 16bit pixeldata to display controller multiple times + * + * @param data: halfword to send + * @param count: how many + * @note here using all pins[15:0] + */ + virtual void wr_gram(unsigned short data, unsigned int count); + + /** Send array of pixeldata shorts to display controller + * + * @param data: unsigned short pixeldata array + * @param lenght: lenght (in shorts) + * @note here using all pins[15:0] + */ + virtual void wr_grambuf(unsigned short* data, unsigned int lenght); + + /** HW reset sequence (without display init commands) + */ + virtual void hw_reset(); + + /** Set ChipSelect high or low + * @param enable 0/1 + */ + virtual void BusEnable(bool enable); + + + +private: + + PortInOut _port; + DigitalOut _CS; + DigitalOut _reset; + DigitalOut _DC; + DigitalOut _WR; + DigitalOut _RD; + +}; +#endif \ No newline at end of file