Duncan Wood / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   Brew

Inits/IST3020.h

Committer:
Geremia
Date:
2015-02-13
Revision:
1:ff019d22b275
Parent:
0:75ec1b3cde17
Child:
9:1749ae993cfe

File content as of revision 1:ff019d22b275:

#ifndef MBED_IST3020_H
#define MBED_IST3020_H



#include "mbed.h"
#include "LCD.h"

/** Class for IST3020 display controller
* to be copypasted and adapted for other controllers
*/
class IST3020 : public LCD
{
 
 public:

    /** Create a PAR display interface
    * @param displayproto only supports PAR_8
    * @param port GPIO port name to use
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param WR pin connected to SDI of display
    * @param RD pin connected to RS of display
    * @param name The name used by the parent class to access the interface
    */ 
    IST3020(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
  
    /** Create an SPI display interface
    * @param displayproto only supports SPI_8
    * @param Hz SPI speed in Hz
    * @param mosi SPI pin
    * @param miso SPI pin
    * @param sclk SPI pin
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param name The name used by the parent class to access the interface
    */ 
    IST3020(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
  

  
protected:
    
    
    /** Init command sequence  
    */
    void init();



};
#endif