Duncan Wood / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   Brew

Diff: Inits/ST7565.h

Revision:
18:ffa58f1a680a
Child:
21:ae0a4eedfc90
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/ST7565.h	Mon Mar 02 10:35:41 2015 +0000
@@ -0,0 +1,58 @@
+#ifndef MBED_ST7565_H
+#define MBED_ST7565_H
+
+
+
+#include "mbed.h"
+#include "LCD.h"
+
+/** Class for ST7565 and similar display controllers
+* to be copypasted and adapted for other controllers
+*/
+class ST7565 : public LCD
+{
+ 
+ public:
+
+    /** Create a PAR display interface
+    * @param displayproto only supports PAR_8
+    * @param port GPIO port name to use
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ST7565(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
+  
+    /** Create an SPI display interface
+    * @param displayproto SPI_8 or SPI_16
+    * @param Hz SPI speed in Hz
+    * @param mosi SPI pin
+    * @param miso SPI pin
+    * @param sclk SPI pin
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    ST7565(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name, unsigned int LCDSIZE_X = 132, unsigned  int LCDSIZE_Y = 64);
+  
+
+  
+protected:
+    
+    
+    /** Init command sequence  
+    */
+    void init();
+
+
+
+};
+#endif
\ No newline at end of file