Duncan Wood
Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Diff: Inits/SEPS225.h
- Revision:
- 23:d0eb35bbd2f3
- Child:
- 24:1a2ebae1d289
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/SEPS225.h Thu Jun 18 02:25:31 2015 +0000
@@ -0,0 +1,94 @@
+#ifndef SEPS225_H
+#define SEPS225_H included
+
+#include "mbed.h"
+#include "TFT.h"
+#include "vt100.h"
+extern vt100 *tty ;
+
+/** Class for SEPS225 Syncoam Co.,Ltd
+ * 128 x 128 Dots, 262K Colors PM-OLED Display Driver and Controller
+ */
+
+class SEPS225 : public TFT
+{
+
+public:
+
+ /** Create a PAR display interface
+ * @param displayproto PAR_8 or PAR_16
+ * @param port GPIO port name to use
+ * @param CS pin connected to CS of display
+ * @param reset pin connected to RESET of display
+ * @param DC pin connected to data/command of display
+ * @param WR pin connected to SDI of display
+ * @param RD pin connected to RS of display
+ * @param name The name used by the parent class to access the interface
+ * @param LCDSIZE_X x size in pixel - optional
+ * @param LCDSIZE_Y y size in pixel - optional
+ */
+ SEPS225(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 128, unsigned int LCDSIZE_Y = 128);
+
+ /** Create a BUS display interface
+ * @param displayproto BUS_8 or BUS_16
+ * @param buspins array of PinName to group as Bus
+ * @param CS pin connected to CS of display
+ * @param reset pin connected to RESET of display
+ * @param DC pin connected to data/command of display
+ * @param WR pin connected to SDI of display
+ * @param RD pin connected to RS of display
+ * @param name The name used by the parent class to access the interface
+ * @param LCDSIZE_X x size in pixel - optional
+ * @param LCDSIZE_Y y size in pixel - optional
+ */
+ SEPS225(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name ,const unsigned int LCDSIZE_X = 128, unsigned int LCDSIZE_Y = 128);
+
+ /** Create an SPI display interface
+ * @param displayproto SPI_8 or SPI_16
+ * @param Hz SPI speed in Hz
+ * @param mosi SPI pin
+ * @param miso SPI pin
+ * @param sclk SPI pin
+ * @param CS pin connected to CS of display
+ * @param reset pin connected to RESET of display
+ * @param DC pin connected to data/command of display
+ * @param name The name used by the parent class to access the interface
+ * @param LCDSIZE_X x size in pixel - optional
+ * @param LCDSIZE_Y y size in pixel - optional
+ */
+ SEPS225(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name ,unsigned int LCDSIZE_X = 128, unsigned int LCDSIZE_Y = 128);
+
+
+ virtual void pixel(int x, int y, unsigned short color);
+ virtual void window(int x, int y, int w, int h);
+ virtual void cls(void) ; // virtual
+ virtual unsigned short pixelread(int x, int y);
+ virtual void window4read(int x, int y, int w, int h);
+ virtual void window_pushpixel(unsigned short color);
+ virtual void window_pushpixel(unsigned short color, unsigned int count);
+ virtual void window_pushpixelbuf(unsigned short* color, unsigned int lenght);
+ void display(int onoff) ;
+
+ void reg_write(unsigned char cmd, unsigned char data) ;
+ void cmd_write(unsigned char cmd) ;
+ void data_write(unsigned char data) ;
+ void write8(unsigned char data) ;
+ void write16(unsigned short sdata) ;
+ void bufwrite8(unsigned char *data, unsigned long len) ;
+ void bufwrite16(unsigned short *sdata, unsigned long len) ;
+
+protected:
+
+
+ /** Init command sequence
+ */
+ void init();
+
+
+private:
+ DigitalOut *_cs ;
+ DigitalOut *_rs ;
+} ;
+
+ #endif /* SEPS225_H */
+